Search

Acoustically actuated magnetoelectric (ME) antennas based on resonant magnetoelectric coupling within ferromagnetic/piezoelectric ME laminated composites have recently been considered as a promising solution for antenna miniaturization. However, its radiation performance has been theoretically overestimated, since the negative effects on performances due to the magnetization saturation and the nonlinear mechanical behavior that occur from high-field driving have not been paid enough attention. This work presents a unique equivalent-circuit-based numerical method to analyze the near-field resonance radiation performances of ME antennas driven by high electric fields. In this method, we establish an equivalent circuit of the converse magnetoelectric effect for a ME laminated composite to describe the operating principle of acoustically actuated electromagnetic radiation. The equivalent parameters related to resonance characteristics are determined by fitting the circuit model to the data from frequency response measurements of the near-field magnetic flux density. The validity of the model is verified by comparing the theoretical predictions with the experimental results, in the view of the volume fraction dependence of the mechanical resonance-related radiation characteristics of the fabricated ME composites. Based on the proposed model, the influence of driving voltage amplitude on near-field radiation performances is further analyzed by experimental fitting to the model, and the potential limiting factors of ME antennas are discussed according to the driving-amplitude dependence of parameters obtained from the fit. This work provides an effective and engineering-friendly approach to predict the evolution of ME antenna performances, leading a way to improve the performance limit for resonant magnetoelectric coupling. [ABSTRACT FROM AUTHOR]

The micro-discharge effect limits the development of high-frequency microwave power components to miniaturization and integration. Therefore, it has become a focus of research to effectively suppress the micro-discharge effect, increase the micro-discharge threshold, and strengthen the environmental stability of high-frequency microwave devices. In this study, different elemental ratios of carbon (C)/silver (Ag)/titanium (Ti) composite films were obtained by multi-target magnetron co-sputtering technology and then systematically analyzed for micro-discharge effects. When the doping ratio of C/Ag/Ti was 3.538/1/0.013, the corresponding maximum secondary electron emission coefficient (δmax) decreased to 1.01 owing to the suppression of secondary electron emission by the increase in the content of sp2 hybrid bond. The micro-discharge threshold of Ku band waveguide filters coated with moderate C/Ag/Ti composite films showed an optimal performance of 10 000−12 500 W, which was increased by approximately 20 times. Moreover, the microstructure of the composite films exhibited higher density and flatness with a tiny increase in the titanium doping ratio, representing good environmental stability. Thus, the effective suppression of the secondary electron emission yield, significant improvement in the micro-discharge threshold, and enhancement of the environment stability of microwave components could be realized simultaneously by reasonably controlling the content of titanium in silver and titanium co-doped carbon-based composite films. [ABSTRACT FROM AUTHOR]

Half-metallic NiCo2O4 with high spin polarizability has great potential applications in spintronics. The manipulation of magnetic anisotropy is crucial for spintronics based on spin-transfer or spin–orbit torques, as it is directly related to the critical switching current density. Here, we report epitaxial growth of metallic NiCo2O4 film with perpendicular magnetic anisotropy on MgAl2O4 single crystal substrates. The modulation of the magnetic anisotropy was achieved by changing the growth conditions (deposition temperature and thickness) of NiCo2O4 films and by means of protonation. Strong dependence of magnetic coercivity on deposition temperature (350–500 °C) has been observed due to variable phase configuration. Furthermore, the magnetic coercive field can also be effectively controlled by the film thickness (3–78 nm) through strain relaxation. More importantly, spin reorientation transition has been achieved by proton and electron doping in the NiCo2O4 films, resulting in reconfigured valence states of Ni and Co cations and a magnetic easy axis rotation from out-of-plane to in-plane. The effective modulation of the magnetic anisotropy provides important insights into the functional design of NiCo2O4-based spintronics with ultralow energy dissipation. [ABSTRACT FROM AUTHOR]

The micro-discharge effect is a failure mechanism that often appeared in space microwave devices under vacuum conditions, such as RF (radio frequency) cavity, RF satellite missile, and antenna launching communication system. How to control micro-discharge effectively and simply has become a research hotspot. In this paper, we have prepared a series of doping silver (Ag)/carbon (C) composite films by double target magnetron sputtering technology and have significantly reduced the maximum secondary electron emission coefficient (δmax) from 2.522 to 1.04 when the doping ratio of Ag/C is 1.345. Theoretically, the continuous increase of sp2 hybrid bond content tuned by the existing Ag nanoparticles has a greater contribution to the conductivity and inhibition of secondary electron emission in the Ag/C composite films. Meanwhile, the gradually emerged "multi-trap" surface structure with the increase of Ag doping content has further increased the collision between excited secondary electrons and free electrons, achieving an obvious inhibition effect. The results demonstrate that secondary electron emission can be suppressed effectively by tuning the structural feature of two kinds of compounded materials with low δmax. It is of great significance in physical mechanism analysis and design of the new doping process. [ABSTRACT FROM AUTHOR]

Piezoelectric ceramic (1 - x)Bi(Sc3/4In1/4)O3-xPbTiO3 (BSIPT) (0.45 ≤ x ≤ 0.70) solid solutions near the morphotropic phase boundary (MPB) were developed for high temperature piezoelectric transducer and actuator applications. It was found that the MPB composition of BSIPT ceramics was in the vicinity of x = 0.6, where it had relatively small tolerance factor t = 0.901 resulting in a high TC of 457 °C, and also optimal properties such as the high Pr = 25.4 μC/cm2, &eh;r = 1153, d33 = 201 pC/N, kp = 0.34, and the low Ec = 23.5 kV/cm. Measurements also showed that the depoling temperature was 360 °C, about 200 °C higher than that of commercialized PZT ceramics, which indicated good temperature stability. BSIPT ceramics are promising candidates for high temperature applications. [ABSTRACT FROM AUTHOR]