Search

The quantification of emissions of greenhouse gases and air pollutants through the inversion of plumes in satellite images remains a complex problem that current methods can only assess with significant uncertainties. The anticipated launch of the CO2M (Copernicus Anthropogenic Carbon Dioxide Monitoring) satellite constellation in 2026 is expected to provide high-resolution images of CO2 (carbon dioxide) column-averaged mole fractions (XCO2), opening up new possibilities. However, the inversion of future CO2 plumes from CO2M will encounter various obstacles. A challenge is the low CO2 plume signal-to-noise ratio due to the variability in the background and instrumental errors in satellite measurements. Moreover, uncertainties in the transport and dispersion processes further complicate the inversion task. To address these challenges, deep learning techniques, such as neural networks, offer promising solutions for retrieving emissions from plumes in XCO2 images. Deep learning models can be trained to identify emissions from plume dynamics simulated using a transport model. It then becomes possible to extract relevant information from new plumes and predict their emissions. In this paper, we develop a strategy employing convolutional neural networks (CNNs) to estimate the emission fluxes from a plume in a pseudo- XCO2 image. Our dataset used to train and test such methods includes pseudo-images based on simulations of hourly XCO2 , NO2 (nitrogen dioxide), and wind fields near various power plants in eastern Germany, tracing plumes from anthropogenic and biogenic sources. CNN models are trained to predict emissions from three power plants that exhibit diverse characteristics. The power plants used to assess the deep learning model's performance are not used to train the model. We find that the CNN model outperforms state-of-the-art plume inversion approaches, achieving highly accurate results with an absolute error about half of that of the cross-sectional flux method and an absolute relative error of ∼ 20 % when only the XCO2 and wind fields are used as inputs. Furthermore, we show that our estimations are only slightly affected by the absence of NO2 fields or a detection mechanism as additional information. Finally, interpretability techniques applied to our models confirm that the CNN automatically learns to identify the XCO2 plume and to assess emissions from the plume concentrations. These promising results suggest a high potential of CNNs in estimating local CO2 emissions from satellite images. [ABSTRACT FROM AUTHOR]

In recent years, research on carbon dioxide removal (CDR) has significantly increased. Numerous studies have analyzed demonstration projects, outlined scenarios, modeled pathways, or focused on CDR's national or international governance. However, regional case studies investigating the dynamics that may facilitate or impede the broader adoption of CDR methods in spatially explicit settings are critically absent. Understanding implementation contexts on the ground is vital, and comparing them across different removal methods is essential for effectively scaling up CDR. This paper aims to address this research gap by comparatively examining the development of biomass-based CDR in three regions of Germany. Taking an exploratory approach, we conducted surveys in these regions to gain insight into stakeholder perceptions of the following six CDR methods: forest management, agriculture and soil carbon, long-lasting building materials, rewetting of peatlands and paludiculture, biochar, and bioenergy with carbon capture and storage. In this article, we present the results of the stakeholder survey, which offers multiple perspectives that can shape future studies of regional implementation and yield policy-relevant guidance. Although our research primarily focuses on the regional level in Germany, it sheds light on various conflicts, uncertainties, and potentials that are likely to be relevant for the rollout of CDR in other countries. By examining these aspects, we contribute to the broader discourse on CDR and its potential implementation. [ABSTRACT FROM AUTHOR]

The assessment of emission factors for many peatlands is difficult, and reliable data on the exchange of carbon dioxide (CO2), methane (CH4) and nitrous oxide (N2O) between soil and atmosphere of these areas is particularly scarce. Reasons for this are the multitude of soil and land use combinations that control greenhouse gas exchange and the high effort associated with data acquisition. We investigated the greenhouse gas exchange of a peat bog restoration sequence over a period of 2 yr (July 2007-June 2009) in an Atlantic raised bog in Northwest Germany. We set up three sites representing different land use intensities: intensive grassland (mineral fertilizer, cattle manure and 4-5 cuts per year); extensive grassland (no fertilizer or manure, maximal 1 cutting per year); near-natural peat bog (almost no anthropogenic influence). We obtained seasonal and annual estimates of greenhouse gas exchange based on closed chamber measurements. CH4 and N2O fluxes were recorded bi-weekly, CO2 NEE determinations were carried out 3-4 weekly. To get annual sums the CH4 and N2O fluxes were interpolated linearly while NEE was modelled. The intensive grassland site emitted 548±169gCO2-Cm-2 in the first and 817±140gCO2-Cm-2 in the second year. The extensive grassland site showed a slight uptake in the first year (-148 ± 143gCO2-Cm-2), and a small emission of 88±146gCO2-Cm-2 in the second year. In contrast to these agriculturally used sites, the near-natural site took up CO2-C in both years(-8±68gCO2-Cm-2 and -127±53gCO2-Cm-2). Under consideration of N2O and CH4 exchange, the total average greenhouse warming potential (GWP) for 2008 amounts to 441 ±157gm-2,14±152gm-2 and 31 ±68gm-2 CO2-C-equivalent for the intensive grassland, the extensive grassland and the near-natural site, respectively. Despite inter-annual variability, rewetting contributes considerably to mitigating GHG emission from formerly drained peatlands. Already extensively used grassland on moderately drained peat approaches the carbon sequestration potential of near-natural sites, albeit it may oscillate between being a small sink and being a small source depending on interannual climatic variability. [ABSTRACT FROM AUTHOR]

Rising energy costs have led to increased discussion about the social impact of the energy transition in Germany in recent years. In 2021, a gradually increasing CO2 tax was introduced. This paper analyzes the question of whether a CO2 tax can be socially just. Using data analysis and desk research, correlations between income and energy consumption in Germany are shown. In a short analysis, it is investigated which additional burdens different types of private households have to expect in the coming years due to the introduction of CO2 pricing on energy. In particular, the introduction of a per capita flat rate fed by CO2 tax revenues could be a suitable way to reduce the burden on low-income households. [ABSTRACT FROM AUTHOR]

This paper presents the examination of a values–beliefs–norms (VBN) model, modified by climate change risk perception, in France, Germany, and Spain, to investigate consumers' intentions to purchase personal and house care products that are going to contain innovative ingredients made from recycled CO2. Electronic interviews were undertaken by a research agency on stratified (gender and age) samples in each country. Solely biospheric values indicated a statistically significant and positive causal relationship with risk perception. Risk perception provided the strongest of all impacts on awareness of consequences. Awareness of consequences affected the ascription of responsibility, and ascription of responsibility affected personal norms, which in turn generated consumption intentions. VBN was found powerful in explaining 58%, 60.2%, and 43.3% of the variance in intentions to buy CPGs with green chemical ingredients in French, German, and Spanish consumers, respectively. Moderation analysis indicated that the relationship between personal norms and consumption intentions is stronger in France and Germany than in Spain. Theoretical and practical implications are provided. [ABSTRACT FROM AUTHOR]

The development of globalization has separated the production and consumption of products spatially, and the international trade of products has become a carrier of embodied carbon trade. This paper adopted the perspective of value-added trade to calculate the amount of embodied carbon trade of China from 2006 to 2015 and perform a structural decomposition analysis of the changes in China's embodied carbon trade. This study found that: (1) China's embodied carbon exports are much larger than its embodied carbon imports, and there are differences between countries. China imported the largest amount of embodied carbon from South Korea, and it exported the largest amount of embodied carbon to the United States. (2) The structural decomposition analysis shows that changes in the value-added carbon emission coefficient during the study period would have caused China's embodied carbon trade to decrease, and changes in value-added trade would have caused China's embodied carbon trade to increase. Therefore, countries trading with China need to strengthen their cooperation with China in energy conservation, emission reduction, and product trade. In order to accurately reflect China's embodied carbon trade, it is necessary to calculate embodied carbon trade from the perspective of value-added trade., Competing Interests: The authors have declared that no competing interests exist.

Finding the essential factors driving carbon emissions is vital for the carbon reduction policy-making. Different from the existing research, this paper studied the separate influence of internal and external input structural changes on global carbon emissions. We applied structural decomposition analysis (SDA) to decompose the global carbon emission change into six factors: namely, the carbon emission intensity, the domestic input structure, the international input structure, consumption pattern, consumption volume and population. The results firstly showed that the contributions of different factors to global carbon emissions changed over time. In recent five years, structural changes of domestic inputs became the principle driver of decrease in global carbon emissions. Secondly, the results showed that there were significant differences for countries in their factors for carbon emissions. In India and Russia, domestic input structural change was the major contributor to the decrease in carbon emissions. In Japan and Germany, the most important factor for the increase in carbon emissions was the international input structure. Finally, the results showed the factors for carbon emission changes were correlated to economic development. The international input structural changes significantly increased carbon emissions in high-income countries. Our findings suggested that some countries such as India and Russia, improving the usage efficiency of domestic carbon-intensive products would help reducing carbon emissions. For most high-income countries such as Japan and Germany, they should reduce the dependence on the imported carbon-intensive products by turning the external input sources to countries with technology advantages. In addition, technology exportation of high-income countries would also be beneficial for the global carbon reduction., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Energy supply in Germany is subject to a profound change. The present paper addresses the German potential of storing excess energy from renewable power sources in the geological subsurface. Wind and solar electricity can be transformed into hydrogen, and with carbon dioxide subsequently into methane. When needed, electricity is regained in a gas turbine power plant combusting the methane. Here, we are taking into account the actual German storage capacity for natural gas and show that the outlined technology is ready for operation and economically competitive. The current potential for combined storage of methane and carbon dioxide allows to store around 80 TWh renewable excess energy. This is far more than required to date and estimated to provide the entire coverage in 2050. [ABSTRACT FROM AUTHOR]

This paper aims to investigate the causal relationship among renewable energy technologies, biomass energy consumption, per capita GDP, and CO 2 emissions for Germany. We constructed an innovative algorithm, the Quantum model, and applied it with Machine Learning experiments - through a software capable of emulating a quantum system - to data over the period of 1990-2018. This process is possible after eliminating the "irreversibility" of classical computations (unitary transformations) by making the process "reversible". The empirical findings support the powerful role of biomass energy in reducing carbon dioxide emissions, although the effect of renewable energy technology displays a much stronger magnitude. Moreover, income remains an important determinant of environmental pollution in Germany., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

This paper empirically investigates the effect of carbon emissions on sovereign risk? To answer this question, we use fixed effects model by using annual data from G7 advanced economies, which includes Canada, France, Germany, Italy, Japan, UK and USA, for the period from 1996 to 2014. We employ a novel extreme value theory to measure sovereign risk. The results indicate that climate change (carbon emissions) are likely to increase sovereign risk significantly. We also expand our analysis to some specific sectors, as some of the sectors emit more carbon than others. Specifically, we take top three polluting sectors namely: transportation, electricity and industry and show that they are more likely to increase the sovereign risk. Our results are robust to change in risk measures, estimation in differences and dynamic version of econometric models. Therefore, we have robust consideration that the carbon emissions significantly explain the sovereign risk., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

This paper contributes to the growing literature regarding the role of Information and Communication Technologies as well as Innovation on driving the level of carbon dioxide emissions and economic growth in context of the 21st conference of the Parties to the Climate convention (COP21). Drawing the data from 13 selected G-20 countries (including Argentina, Canada, China, France, Germany, Italy, Japan, Mexico, Republic of Korea, Russian Federation, Turkey, United Kingdom, United States) during the period of 15 years, our study achieves significant results. First, only five factors impede the carbon emissions namely energy price, foreign direct investment, technology, spending on innovation and trade openness while the remainder of determinants contribute to contamination of environment, including financial development. Second, when it comes to economic growth, information and communication technological and financial development are positive driving factors. Our results do reject the absence of Environmental Kuznets Curve (EKC) from our sample. Finally, our study empirically suggests that the work of controlling consumption of oil and environmentally friendly process including manufacture-trading in these economies will limit the amount of pollution., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Meeting Germany's climate targets urgently demands substantial investment in renewable energies such as hydrogen, as well as tackling industrial CO2 emissions with a strong CO2 transport infrastructure. This is particularly crucial for CO2-heavy industries such as steel, cement, lime production, power plants, and chemical plants, given Germany's ban on onshore storage. The CO2 transport network is essential for maintaining a circular economy by capturing, transporting, and either storing or utilizing CO2. This study fills gaps in CO2 pipeline transport research, examining pipeline diameters, costs, and pressure drop, and providing sensitivity analysis. Key findings show that the levelized cost of CO2 transport (LCO2T) ranges from 0.25 €/t to 55.82 €/t based on varying transport masses (1000 t/day to 25,000 t/day) and distances (25 km to 500 km), with compression costs pushing LCO2T to 33.21 €/t to 92.82 €/t. Analyzing eight pipeline diameters (150 mm to 500 mm) and the impact of CO2 flow temperature on pressure loss highlights the importance of selecting optimal pipeline sizes. Precise booster station placement is also crucial, as it significantly affects the total LCO2T. Exploring these areas can offer a more thorough understanding of the best strategies for developing cost-effective, efficient, and sustainable transport infrastructure. [ABSTRACT FROM AUTHOR]

In this paper, a multi-step framework to design flexible power-to-methane processes is presented. The approach considers all crucial parts of the power-to-methane process, including the renewable energy source. The aim is to provide a design that allows for feasible operation under the fluctuating conditions induced by the renewable energy source at all times. For each part of the process, the operating windows are analyzed and optimized under different site-specific constraints, and recommendations for actions regarding the technical implementations are provided. The impact of the carbon dioxide source is scrutinized, and subsequent scheduling optimization is performed to determine necessary storage capacities. The framework is demonstrated on two carbon dioxide availability scenarios where the renewable energy source is a wind turbine coupled to a polymer exchange membrane electrolyzer that produces hydrogen, which is then converted to methane in a fixed-bed reactor. The results show that the feasible operation of the system strongly depends on the site-specific conditions. In particular, the availability of carbon dioxide impacts the flexibility of the methanation reactor. When the stochiometric ratio between hydrogen and carbon dioxide cannot be sustained, the operating window of the reactor deteriorates significantly. However, it is shown that appropriate integration and scheduling of storage capacities debottlenecks the reactor and enables the utilization of all electricity generated by the wind turbine. • A framework for the design of flexible power-to-methane systems is introduced. • Optimization approaches for each step of the framework are provided. • A dynamic optimization approach for storage integration is given. • The impact of the carbon dioxide provision flexibility is investigated. • The framework is tested in a case study with an onshore wind turbine in Germany. [ABSTRACT FROM AUTHOR]

To reach their net‐zero targets, countries will have to compensate hard‐to‐abate CO2 emissions through carbon dioxide removal (CDR). Yet, current assessments rarely include socio‐cultural or institutional aspects or fail to contextualize CDR options for implementation. Here we present a context‐specific feasibility assessment of CDR options for the example of Germany. We assess 14 CDR options, including three chemical carbon capture options, six options for bioenergy combined with carbon capture and storage (BECCS), and five options that aim to increase ecosystem carbon uptake. The assessment addresses technological, economic, environmental, institutional, social‐cultural and systemic considerations using a traffic‐light system to evaluate implementation opportunities and hurdles. We find that in Germany CDR options like cover crops or seagrass restoration currently face comparably low implementation hurdles in terms of technological, economic, or environmental feasibility and low institutional or social opposition but show comparably small CO2 removal potentials. In contrast, some BECCS options that show high CDR potentials face significant techno‐economic, societal and institutional hurdles when it comes to the geological storage of CO2. While a combination of CDR options is likely required to meet the net‐zero target in Germany, the current climate protection law includes a limited set of options. Our analysis aims to provide comprehensive information on CDR hurdles and possibilities for Germany for use in further research on CDR options, climate, and energy scenario development, as well as an effective decision support basis for various actors. Plain Language Summary: Countries aiming to achieve net‐zero emissions will have to remove the remaining carbon dioxide from the atmosphere through carbon dioxide removal (CDR). However, current assessments of CDR options rarely consider socio‐cultural or institutional aspects or set the CDR options in the specific context of their implementation. In this study, researchers conducted the first context‐specific feasibility assessment of CDR options in Germany, considering six dimensions, including technological, economic, environmental, institutional, and social‐cultural aspects. The study assessed 14 CDR options, including chemical carbon capture options, bioenergy combined with carbon capture and storage, and options to increase ecosystem carbon uptake. The study found that CDR options like cover crops or seagrass restoration face low implementation hurdles but have small CO2 removal potentials, while options like woody‐biomass combustion or mixed‐feedstock biogas production have high CDR potentials but face large economic and institutional hurdles. The analysis aims to provide comprehensive information on CDR options for use in further research and as an effective decision support basis for a range of actors. Key Points: More context‐specific assessments of carbon dioxide removal (CDR) options are needed to guide national net‐zero decision makingEcosystem‐based CDR options with comparably low implementation hurdles in Germany show relatively small CO2 removal potentialsHigh CDR potential options in Germany face high institutional, technological and societal hurdles linked in many ways to geological storage [ABSTRACT FROM AUTHOR]

Greenhouse gas (GHG) emissions from rivers are globally relevant, but quantification of these emissions comes with considerable uncertainty. Quantification of ecosystem-scale emissions is challenged by both spatial and short-term temporal variability. We measured spatio-temporal variability of CO 2 and CH 4 fluxes from a 1 km long reach of the lowland river Elbe in Germany over 3 d to establish which factor is more relevant to be taken into consideration: small-scale spatial variability or short-term temporal variability of CO 2 and CH 4 fluxes. GHG emissions from the river reach studied were dominated by CO 2 , and 90 % of total emissions were from the water surface, while 10 % of emissions were from dry fallen sediment at the side of the river. Aquatic CO 2 fluxes were similar at different habitats, while aquatic CH 4 fluxes were higher at the side of the river. Artificial structures to improve navigability (groynes) created still water areas with elevated CH 4 fluxes and lower CO 2 fluxes. CO 2 fluxes exhibited a clear diurnal pattern, but the exact shape and timing of this pattern differed between habitats. By contrast, CH 4 fluxes did not change diurnally. Our data confirm our hypothesis that spatial variability is especially important for CH 4 , while diurnal variability is more relevant for CO 2 emissions from our study reach of the Elbe in summer. Continuous measurements or at least sampling at different times of the day is most likely necessary for reliable quantification of river GHG emissions. [ABSTRACT FROM AUTHOR]

• Earlier phase-out of coal is not the best answer to achieve energy transition. • The 2050 plan and historical RES investments maxima are not enough to reach climate neutrality. • What is the effect of regional RES limits over Nationwide RES limits. • Where will be the states in Germany having major RES deployment. • Myopic optimization reveals new challenges for energy policy. This paper will introduce the open-source model MyPyPSA-Ger, a myopic optimization model developed to represent the German energy system with a detailed mapping of the electricity sector, on a highly disaggregated level, spatially and temporally, with regional differences and investment limitations. Furthermore, this paper will give new outlooks on the German federal government 2050 emissions goals of the electricity sector to become greenhouse gas neutral by proposing new CO 2 allowance strategies. Moreover, the regional differences in Germany will be discussed, their role and impact on the energy transition, and which regions and states will drive the renewable energy utilization forward. Following a scenario-based analysis, the results point out the major keystones of the energy transition path from 2020 to 2050. Solar, onshore wind, and gas-fired power plants will play a fundamental role in the future electricity systems. Biomass, run of river, and offshore wind technologies will be utilized in the system as base-load generation technologies. Solar and onshore wind will be installed almost everywhere in Germany. However, due to the nature of Germany's weather and geographical features, the southern and northern regions will play a more important role in the energy transition. Higher CO 2 allowance costs will help achieve the 1.5-degree-target of the electricity system and will allow for a rapid transition. Moreover, the more expensive, and the earlier the CO 2 tax is applied to the system, the less it will cost for the energy transition, and the more emissions will be saved throughout the transition period. An earlier phase-out of coal power plants is not necessary with high CO 2 taxes, due to the change in power plant's unit commitment, as they prioritize gas before coal power plants. Having moderate to low CO 2 allowance cost or no clear transition policy will be more expensive and the CO 2 budget will be exceeded. Nonetheless, even with no policy, renewables still dominate the energy mix of the future. However, maintaining the maximum historical installation rates of both national and regional levels, with the current emissions reduction strategy, will not be enough to reach the level of climate-neutral electricity system. Therefore, national and regional installation requirements to achieve the federal government emission reduction goals are determined. Energy strategies and decision makers will have to resolve great challenges in order to stay in line with the 1.5-degree-target. [ABSTRACT FROM AUTHOR]

A barn's climate is vital for animal welfare and emissions control, including greenhouse gases like methane (CH4) and carbon dioxide (CO 2 ) and environmental gases like ammonia (NH 3 ). The goal of this study was to investigate a developed low-cost online tool for monitoring barn climate and air pollutant emissions (OTICE) in naturally ventilated barns. OTICE employed a wireless sensor network with low-cost sensors for gases and climate variables, allowing scalable use across multiple barns. We evaluated the sensors for CO 2 , NH 3 , and CH4 for accuracy, both in controlled lab conditions and in a dairy barn in Germany, where measurements were carried out continuously for a duration of 12 days. For the averaged concentration levels over the measurement period, the low-cost sensors agreed well with the reference system, with relative deviations lower than 7% for all three gases, with maximum peak deviations up to 32% for CO 2 , 67% for NH 3 , and 65% for CH 4 , with strong Spearman correlations for CO 2 and NH 3 ( ρ C O 2 = 0.8, ρ N H 3 = 0.68) and a rather weak correlation for CH4 with ρ C H 4 = 0.24. Further calibration and stability investigations are required, especially for CH4 sensing. However, the overall good results for NH 3 and especially CO 2 measurements indicate a huge potential of the low-cost system as a valuable tool for monitoring relative NH 3 emission levels and the measurement of air exchange rates in naturally ventilated barns. [ABSTRACT FROM AUTHOR]

The O 2 : CO 2 exchange ratio (ER) between terrestrial ecosystems and the atmosphere is a key parameter for partitioning global ocean and land carbon fluxes. The long-term terrestrial ER is considered to be close to 1.10 mol of O 2 consumed per mole of CO 2 produced. Due to the technical challenge in measuring directly the ER of entire terrestrial ecosystems (ER eco), little is known about variations in ER at hourly and seasonal scales, as well as how different components contribute to ER eco. In this modeling study, we explored the variability in and drivers of ER eco and evaluated the hypothetical uncertainty in determining ecosystem O 2 fluxes based on current instrument precision. We adapted the one-dimensional, multilayer atmosphere–biosphere gas exchange model "CANVEG" to simulate hourly ER eco from modeled O 2 and CO 2 fluxes in a temperate beech forest in Germany. We found that the modeled annual mean ER eco ranged from 1.06 to 1.12 mol mol -1 within the 5-year study period. Hourly ER eco showed strong variations over diel and seasonal cycles and within the vertical canopy profile. The determination of ER from O 2 and CO 2 mole fractions in air above and within the canopy (ER conc) varied between 1.115 and 1.15 mol mol -1. CANVEG simulations also indicated that ecosystem O 2 fluxes could be derived with the flux-gradient method using measured vertical gradients in scalar properties, as well as fluxes of CO 2 , sensible heat and latent energy derived from eddy covariance measurements. Owing to measurement uncertainties, however, the uncertainty in estimated O 2 fluxes derived with the flux-gradient approach could be as high as 15 µ mol m -2 s -1 , which represented the 90 % quantile of the uncertainty in hourly data with a high-accuracy instrument. We also demonstrated that O 2 fluxes can be used to partition net CO 2 exchange fluxes into their component fluxes of photosynthesis and respiration if ER eco is known. The uncertainty of the partitioned gross assimilation ranged from 1.43 to 4.88 µ mol m -2 s -1 assuming a measurement uncertainty of 0.1 or 2.5 µ mol m -2 s -1 for net ecosystem CO 2 exchange and from 0.1 to 15 µ mol m -2 s -1 for net ecosystem O 2 exchange, respectively. Our analysis suggests that O 2 measurements at ecosystem scale have the potential to partition net CO 2 fluxes into their component fluxes, but further improvement in instrument precision is needed. [ABSTRACT FROM AUTHOR]

In this paper, we propose the return-to-cost-ratio (RCR) as an alternative approach to the analysis of operational eco-efficiency of companies based on the notion of opportunity costs. RCR helps to overcome two fundamental deficits of existing approaches to eco-efficiency. (1) It translates eco-efficiency into managerial terms by applying the well-established notion of opportunity costs to eco-efficiency analysis. (2) RCR allows to identify and quantify the drivers behind changes in corporate eco-efficiency. RCR is applied to the analysis of the CO(2)-efficiency of German companies in order to illustrate its usefulness for a detailed analysis of changes in corporate eco-efficiency as well as for the development of effective environmental strategies., (Copyright (c) 2010 Elsevier Ltd. All rights reserved.)

For the assessment of emission inventories matching pairs of activities (emission explaining variables) and emission factors are used. Simpler and detailed methodologies are proposed within the emission inventory handbooks. The data sets needed to serve the detailed methodologies have not been at public disposal so far. Therefore, this paper investigates the applicability of simpler methodologies to the statistical data sets of activities officially available in Germany. The statistical data base for the assessment of emissions from fertilised soils is adequate if one assumes that fertilisers sold in one financial year are applied in the same year. For grassland, statistical data describing the actual management do not exist. Lack of nitrogen inputs with crop residues and due to nitrogen fixation make it impossible to deduce the respective emissions. The assessment of indirect emissions due to reactions of leached nitrogen is also impossible. For extensively managed grasslands, data concerning fertiliser application or grazing are missing when calculating emissions. The determination of emissions from organic soils presupposes the knowledge of both the area concerned and the degree of mineralisation which has been attained at the time of the inventory. The results of the biennial animal census meet the requirements of the simpler methodologies. However, the assumptions made to evaluate the mean emission factors are not correct in many cases, as far as animal performance, housing, storage and application of animal excreta are concerned. The simpler methodologies are biassed, as the emission factors are (Northwest) European means. Changes in the raising of statistical data make the construction of meaningful time-series difficult.

Anthropogenic activities increase the contributions of inland waters to global greenhouse gas (GHG; CO 2 , CH 4 , and N 2 O) budgets, yet the mechanisms driving these increases are still not well constrained. In this study, we quantified year-long GHG concentrations, fluxes, and water physico-chemical variables from 28 sites contrasted by land use across five headwater catchments in Germany. Based on linear mixed-effects models, we showed that land use was more significant than seasonality in controlling the intra-annual variability of the GHGs. Streams in agriculture-dominated catchments or with wastewater inflows had up to 10 times higher daily CO 2 , CH 4 , and N 2 O emissions and were also more temporally variable (CV > 55 %) than forested streams. Our findings also suggested that nutrient, labile carbon, and dissolved GHG inputs from the agricultural and settlement areas may have supported these hotspots and hot-moments of fluvial GHG emissions. Overall, the annual emission from anthropogenic-influenced streams in CO 2 equivalents was up to 20 times higher (∼ 71 kg CO 2 m -2 yr -1) than from natural streams (∼ 3 kg CO 2 m -2 yr -1), with CO 2 accounting for up to 81 % of these annual emissions, while N 2 O and CH 4 accounted for up to 18 % and 7 %, respectively. The positive influence of anthropogenic activities on fluvial GHG emissions also resulted in a breakdown of the expected declining trends of fluvial GHG emissions with stream size. Therefore, future studies should focus on anthropogenically perturbed streams, as their GHG emissions are much more variable in space and time and can potentially introduce the largest uncertainties to fluvial GHG estimates. [ABSTRACT FROM AUTHOR]

Globally, soil temperature to 1 m depth is predicted to be up to 4 ∘C warmer by the end of this century, with pronounced effects expected in temperate forest regions. Increased soil temperatures will potentially increase the release of carbon dioxide (CO2) from temperate forest soils, resulting in important positive feedback on climate change. Dark CO2 fixation by microbes can recycle some of the released soil CO2 , and CO2 fixation rates are reported to increase under higher temperatures. However, research on the influence of temperature on dark CO2 fixation rates, particularly in comparison to the temperature sensitivity of respiration in soils of temperate forest regions, is missing. To determine the temperature sensitivity (Q10) of dark CO2 fixation and respiration rates, we investigated soil profiles to 1 m depth from beech (deciduous) and spruce (coniferous) forest plots of the Hummelshain forest, Germany. We used 13C - CO2 labelling and incubations of soils at 4 and 14 ∘C to determine CO2 fixation and net soil respiration rates and derived the Q10 values for both processes with depth. The average Q10 for dark CO2 fixation rates normalized to soil dry weight was 2.07 for beech and spruce profiles, and this was lower than the measured average Q10 of net soil respiration rates with ∼2.98. Assuming these Q10 values, we extrapolated that net soil respiration might increase 1.16 times more than CO2 fixation under a projected 4 ∘C warming. In the beech soil, a proportionally larger fraction of the label CO2 was fixed into soil organic carbon than into microbial biomass compared to the spruce soil. This suggests a primarily higher rate of microbial residue formation (i.e. turnover as necromass or release of extracellular products). Despite a similar abundance of the total bacterial community in the beech and spruce soils, the beech soil also had a lower abundance of autotrophs, implying a higher proportion of heterotrophs when compared to the spruce soil; hence this might partly explain the higher rate of microbial residue formation in the beech soil. Furthermore, higher temperatures in general lead to higher microbial residues formed in both soils. Our findings suggest that in temperate forest soils, CO2 fixation might be less responsive to future warming than net soil respiration and could likely recycle less CO2 respired from temperate forest soils in the future than it does now. [ABSTRACT FROM AUTHOR]

The use of CO2-based hydrocarbons plays a crucial role in reducing the climate footprint for several industry sectors, such as the chemical industry. Recent studies showed that regions which are favorable for the production of CO2-based hydrocarbons from an energy perspective often do not provide concentrated point sources for CO2, which leads to an increased environmental impact due to the higher energy demand of direct air capture processes. Thus, producing H2 in regions with high renewable power potential and transporting it to industrialized regions with concentrated CO2 point sources could provide favorable options for the whole process chain. The aim of this study is to analyze and compare pathways to produce CO2-based methanol in Germany using a local CO2 point source in combination with the import of H2 per pipeline or per ship as well as H2 produced in Germany. The environmental and economic performance of the pathways are assessed using life cycle assessment and cost analysis. As environmental indicators, the climate, material, water, and land footprints were calculated. The pathway that uses H2 produced with electricity from offshore wind parks in Germany shows the least environmental impacts, whereas the import via pipeline shows the best results among the importing pathways. The production costs are the lowest for import via pipeline now and in the near future. Import via ship is only cost-efficient in the status quo if waste heat sources are available, but it could be more competitive in the future if more energy and cost-efficient options for regional H2 distribution are available. It is shown that the climate mitigation effect is more cost-effective if the H2 is produced domestically or imported via pipeline. Compared to the import of CO2-based methanol, the analyzed H2 import pathways show a comparable (pipeline) or worse environmental and economic performance (ship). [ABSTRACT FROM AUTHOR]

Germany 2050: For the first time Germany reached a balance between its sources of anthropogenic CO2 to the atmosphere and newly created anthropogenic sinks. This backcasting study presents a fictional future in which this goal was achieved by avoiding (∼645 Mt CO2), reducing (∼50 Mt CO2) and removing (∼60 Mt CO2) carbon emissions. This meant substantial transformation of the energy system, increasing energy efficiency, sector coupling, and electrification, energy storage solutions including synthetic energy carriers, sector‐specific solutions for industry, transport, and agriculture, as well as natural‐sink enhancement and technological carbon dioxide options. All of the above was necessary to achieve a net‐zero CO2 system for Germany by 2050. Plain Language Summary: Here a net‐zero‐2050 Germany is envisioned by combining analysis from an energy‐system model with insights into approaches that allow for a higher carbon circularity in the German system, and first results from assessments of national carbon dioxide removal potentials. A back‐casting perspective is applied on how net‐zero Germany could look like in 2050. We are looking back from 2050, and analyzing how Germany for the first time reached a balance between its sources of CO2 to the atmosphere and the anthropogenic sinks created. This would consider full decarbonization in the entire energy sector and being entirely emission‐free by 2050 within three priorities identified as being the most useful strategies for achieving net‐zero: (a) Avoiding‐ (b) Reducing‐ (c) Removing emissions. This work is a collaboration of interdisciplinary scientists with the Net‐Zero‐2050 cluster of the Helmholtz Climate Initiative HI‐CAM. Key Points: The net‐zero system shows that for countries like Germany, avoiding CO2 emissions was the largest contribution to achieve net‐zero CO2With the three strategies of emissions avoidance, reduction, and removal, Germany has achieved its net‐zero CO2 goal for the first timeIn addition, to natural sink enhancement carbon dioxide removal (CDR) options, technological CDR measures combined with geological CO2 storage were necessary to reach net‐zero CO2 [ABSTRACT FROM AUTHOR]

Abstract: The building sector consumes, even today, about one third of primary energy used in countries like Germany, which, in addition to tons of CO2 and depletion of energy sources, involves a cost of millions of Euros. This paper shows how, only through the optimization of the system technique regulations, energy savings by a margin of 30% can be achieved in offices and administrative buildings. This potential reduction or even elimination of expenses is possible with the use of the automation system that is proposed in this article. It is important to emphasize that simulation models of HVAC systems and rooms are very often used during the planning phase of a project for a proper system design. However, these simulation tools offer additional possibilities for control algorithm development and performance observation which are not used in practice so far. This article demonstrates that simulation based predictive control, using a system operation that is not depending on a main computer but on the components of an intelligent bus, offers the opportunity of a better utilization of the buildings and their thermal mass. [Copyright &y& Elsevier]

Abstract: This paper investigates whether coal-fired Integrated Gasification Combined-Cycle (IGCC) power plants can be an economically viable future technology for providing less carbon-intensive electricity and heat energy in Germany than today. In the context of CO2 emission mitigation in power generation, energy conversion technologies enabling the implementation of Carbon Capture and Storage (CCS) need to be considered. IGCC is such a technology, as it utilizes coal but does not necessarily emit CO2. In our study we investigate, from an economic perspective, whether IGCC plants can be an alternative to nuclear and/or conventional coal-fired power plants. The research is based on scenario analysis. The starting point is the expected shut-down of nuclear power stations and outdated coal-fired power plants, as well as the projected evolution of the CO2 price. The hot gas cleaning option in IGCC plants is of particular interest, as it allows a significant enhancement of the efficiency of the IGCC technology and the use of combined heat and power production (CHP). Corresponding supplementary earnings (incl. subsidies) are compared with an increase in specific investment costs. Besides hot gas cleaning, we also investigate the economic impact of injecting pure CO2 (separated from the IGCC process) into oilfields, as Enhanced Oil Recovery (EOR) can help to reduce the costs of CO2 transport and storage. Based on the results from our analysis we find that the replacement of currently operating power plants by IGCC facilities is only reasonable under certain circumstances, e.g. for locational reasons. Furthermore, from today’s perspective, and due to its various advantages, a complete abandonment of the IGCC technology seems rather unlikely. Our analysis of NPVs of total costs indicates that some IGCC designs exist that are less expensive to set up and operate than a conventional reference power plant. The option of injecting CO2 sequestered from the power plant process into almost depleted oil fields appears attractive for a utility investing in IGCC technology, rendering such a plant configuration as likely cost-competitive. However, with regard to climate change mitigation, the least-cost investment alternative is not necessarily the one with the lowest GHG emissions. Significant cost reductions can be achieved by improving the efficiency or the availability of the plant. Finally, the NPV changes markedly when the heat-to-power ratio is altered, and high ratios are found to be incompatible with NPV minimization. [Copyright &y& Elsevier]

Oxy-combustion is a feasible CO 2 capture method in the power and heat generation sector. This paper aims to propose a methodology for assessing two oxygen production technologies for small-scale oxy-combustion units: i) two-bed pressure swing adsorption (PSA), and ii) liquid oxygen delivery (LOX) for any local conditions, including the greenhouse gas (GHC) footprint for the oxygen that is produced. An analysis of PSA technology and LOX technology was carried out for the Czech Republic and for Germany, where the electricity, labor costs, and greenhouse gas (GHC) emission factors of electrical power differ considerably, but the equipment costs are similar. The analysis always has to be based on local prices, especially on the electricity price that is available for consumers operating PSA units and the price for liquid oxygen delivery, and also GHC emission factors for the electric energy produced in a given area or country. Depending on the local conditions, we may reach completely different conclusions concerning the technology that will be chosen for oxygen supply. • Two oxygen sources for small oxy-combustion units were economically analysed. • These sources were assessed: i) PSA technology, and ii) LOX delivery technology. • The operating costs are affected by local electricity prices and LOX price. • The electricity cost varies country from country and depends on electricity take-off. • Depending on the local conditions completely different conclusions can be obtained. [ABSTRACT FROM AUTHOR]

• Assessment of responsiveness' role in mechanisms for adjusting economic incentives. • Agent-based model of feed-in tariff for solar adoption in Germany, Spain, Switzerland. • More responsive designs meet deployment policy goal accurately and lower uncertainty. • Surprisingly, results show diminishing returns of responsiveness that add policy cost. • Country-specific attributes shown to influence solar power diffusion patterns. A rapid, global diffusion of clean energy technologies is central to the efforts to curb global carbon dioxide emissions. Deployment policies based on economic incentives have proved effective in accelerating the uptake of renewable technologies, such as solar photovoltaics, and could quicken the adoption of others. However, their outcomes were often uncertain and costly as many countries struggled to adjust incentives while technology prices fell rapidly. This study addresses this challenge by investigating the role of responsiveness – the policy's ability to react to changes in the context in which it operates – in the design of mechanisms for adjusting incentives over time. This paper employs an agent-based model to evaluate quantitatively six policy designs with varying degrees of responsiveness for adjusting a feed-in tariff for solar photovoltaics in three countries – Germany, Spain, and Switzerland – for over a decade. Our first finding confirms that more responsive policy designs tended to produce policies that meet their goals more accurately and certainly. Between the least and the most responsive designs, deviation from policy goals was reduced by 60% and uncertainty was reduced by more than 50%. Our results also suggest that policy responsiveness could have diminishing returns: improvements in the policy's accuracy and certainty tended to become smaller while policy costs per capita tended to become larger as design responsiveness increased. Finally, simulation results show how country-specific attributes influence the diffusion pattern of the technology. These findings have major implications for the design of future deployment policies supporting the diffusion of clean energy technologies. [ABSTRACT FROM AUTHOR]

Inland waters, particularly small and shallow lakes, are significant sources of carbon dioxide (CO2) and methane (CH4) to the atmosphere. However, the spatial in-lake heterogeneity of CO2 and CH4 production processes and their drivers in the sediment remain poorly studied. We measured potential CO2 and CH4 production in slurry incubations from 12 sites within the small and shallow crater lake Windsborn in Germany, as well as fluxes at the water–atmosphere interface of intact sediment core incubations from four sites. Production rates were highly variable and ranged from 7.2 to 38.5 µ mol CO2 gC -1 d -1 and from 5.4 to 33.5 µ mol CH4 gC -1 d -1. Fluxes ranged from 4.5 to 26.9 mmol CO2 m -2 d -1 and from 0 to 9.8 mmol CH4 m -2 d -1. Both CO2 and CH4 production rates and the CH4 fluxes exhibited a significant and negative correlation (p<0.05 , ρ<-0.6) with a prevalence of recalcitrant organic matter (OM) compounds in the sediment as identified by Fourier-transformed infrared spectroscopy. The carbon / nitrogen ratio exhibited a significant negative correlation (p<0.01 , ρ=-0.88) with CH4 fluxes but not with production rates or CO2 fluxes. The availability of inorganic (nitrate, sulfate, ferric iron) and organic (humic acids) electron acceptors failed to explain differences in CH4 production rates, assuming a competitive suppression, but observed non-methanogenic CO2 production could be explained up to 91 % by prevalent electron acceptors. We did not find clear relationships between OM quality, the thermodynamics of methanogenic pathways (acetoclastic vs. hydrogenotrophic) and electron-accepting capacity of the OM. Differences in CH4 fluxes were interestingly to a large part explained by grain size distribution (p<0.05 , ρ=±0.65). Surprisingly though, sediment gas storage, potential production rates and water–atmosphere fluxes were decoupled from each other and did not show any correlations. Our results show that within a small lake, sediment CO2 and CH4 production shows significant spatial variability which is mainly driven by spatial differences in the degradability of the sediment OM. We highlight that studies on production rates and sediment quality need to be interpreted with care, though, in terms of deducing emission rates and patterns as approaches based on production rates only neglect physical sediment properties and production and oxidation processes in the water column as major controls on actual emissions. [ABSTRACT FROM AUTHOR]

Stomatal regulation and whole plant hydraulic signaling affect water fluxes and stress in plants. Land surface models and crop models use a coupled photosynthesis–stomatal conductance modeling approach. Those models estimate the effect of soil water stress on stomatal conductance directly from soil water content or soil hydraulic potential without explicit representation of hydraulic signals between the soil and stomata. In order to explicitly represent stomatal regulation by soil water status as a function of the hydraulic signal and its relation to the whole plant hydraulic conductance, we coupled the crop model LINTULCC2 and the root growth model SLIMROOT with Couvreur's root water uptake model (RWU) and the HILLFLOW soil water balance model. Since plant hydraulic conductance depends on the plant development, this model coupling represents a two-way coupling between growth and plant hydraulics. To evaluate the advantage of considering plant hydraulic conductance and hydraulic signaling, we compared the performance of this newly coupled model with another commonly used approach that relates root water uptake and plant stress directly to the root zone water hydraulic potential (HILLFLOW with Feddes' RWU model). Simulations were compared with gas flux measurements and crop growth data from a wheat crop grown under three water supply regimes (sheltered, rainfed, and irrigated) and two soil types (stony and silty) in western Germany in 2016. The two models showed a relatively similar performance in the simulation of dry matter, leaf area index (LAI), root growth, RWU, gross assimilation rate, and soil water content. The Feddes model predicts more stress and less growth in the silty soil than in the stony soil, which is opposite to the observed growth. The Couvreur model better represents the difference in growth between the two soils and the different treatments. The newly coupled model (HILLFLOW–Couvreur's RWU–SLIMROOT–LINTULCC2) was also able to simulate the dynamics and magnitude of whole plant hydraulic conductance over the growing season. This demonstrates the importance of two-way feedbacks between growth and root water uptake for predicting the crop response to different soil water conditions in different soils. Our results suggest that a better representation of the effects of soil characteristics on root growth is needed for reliable estimations of root hydraulic conductance and gas fluxes, particularly in heterogeneous fields. The newly coupled soil–plant model marks a promising approach but requires further testing for other scenarios regarding crops, soil, and climate. [ABSTRACT FROM AUTHOR]

Arthropods are a major soil fauna group, and have the potential to substantially influence the spatial and temporal variability of soil greenhouse gas (GHG) sinks and sources. The overall effect of soil-inhabiting arthropods on soil GHG fluxes still remains poorly quantified since the majority of the available data comes from laboratory experiments, is often controversial, and has been limited to a few species. The main objective of this study was to provide first insights into field-level carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O) release of soil-inhabiting larvae of the Scarabaeidae family. Larvae of the genus Melolontha were excavated at various sites in west-central and southern Germany, covering a wide range of different larval developmental stages, larval activity levels, and vegetation types. Excavated larvae were immediately incubated in the field to measure their GHG production. Gaseous carbon release of individual larvae showed a large inter- and intra-site variability which was strongly correlated to larval biomass. This correlation persisted when upscaling individual CO2 and CH4 production to the plot scale. Field release estimates for Melolontha spp. were subsequently upscaled to the European level to derive the first regional GHG release estimates for members of the Scarabaeidae family. Estimates ranged between 10.42 and 409.53 kt CO2 yr-1, and 0.01 and 1.36 kt CH4 yr-1. Larval N2O release was only sporadically observed and not upscaled. For one site, a comparison of field- and laboratory-based GHG production measurements was conducted to assess potential biases introduced by transferring Scarabaeidae larvae to artificial environments. Release strength and variability of captive larvae decreased significantly within two weeks and the correlation between larval biomass and gaseous carbon production disappeared, highlighting the importance of field measurements. Overall, our data show that Scarabaeidae larvae can be significant soil GHG sources and should not be neglected in soil GHG flux research. [ABSTRACT FROM AUTHOR]

Regarding the exploitation of natural resources, storage of waste or subsurface construction, there is an increasing need to obtain comprehensive knowledge about the subsurface and its temporal changes. We investigate the possibility of a passive monitoring using ambient seismic noise, which is cheap and continuous compared to active seismics. We work with data acquired with a seismic network in Ketzin (Germany) where 67 271 tons of CO2 were injected from 2008 June until 2013 August into a saline aquifer at a depth of about 650 m. Monitoring the expansion of the CO2 plume is essential for the characterization of the reservoir as well as the detection of potential leakage. By cross-correlating about 4 yr of passive seismic data in a frequency range of 0.05-4.5 Hz we found periodic velocity variations with a period of approximately 1 yr that cannot be caused by the CO2 injection. The prominent direction of the noise wavefield indicates a wind farm as the dominant source providing the temporally stable noise field. This spacial stability excludes variations of the noise source distribution as a cause of spurious velocity variations. Based on an amplitude decrease associated with time windows towards later parts of the coda, we show that the variations must be generated in the shallow subsurface. A comparison to groundwater level data reveals a direct correlation between depth of the groundwater level and the seismic velocity. The influence of ground frost on the seismic velocities is documented by a sharp increase of velocity when the maximum daily temperature stays below 0°C. Although the observed periodic changes and the changes due to ground frost affect only the shallow subsurface, they mask potential signals of material changes from the reservoir depths. [ABSTRACT FROM AUTHOR]

Mosquitoes and other arthropods may transmit medically important pathogens, in particular viruses such as West Nile virus. The presence of suitable hosts and competent vectors for those zoonotic viruses is essential for an enzootic transmission, which is a prerequisite for epidemics. To establish reliable risk projections, it is an urgent need for an exact identification of mosquito species, which is especially challenging in the case of sibling species, such as Culex. pipiens pipiens biotypes pipiens and molestus. To facilitate detection of different Culex pipiens forms and their hybrids we established a multiplex real-time PCR. Culex pipiens samples were obtained by egg raft collection and rearing until imago stage or adult sampling using CO2 baited traps and gravid traps. In total, we tested more than 16,500 samples collected all over Germany in the years 2011 and 2012. The predominant species in Germany are Culex pipiens pipiens biotype pipiens and Culex. torrentium, but we also detected Culex pipiens pipiens biotype molestus and hybrids of the two pipiens biotypes at sites where both species occur sympatrically. This report of a potentially important bridge vector for West Nile virus might have major impact in the risk projections for West Nile virus in Germany. [ABSTRACT FROM AUTHOR]

A 7-year-long data set of integrated high-precision CO observations combined with occasional hourly CO flask data from the Heidelberg sampling site is presented. Heidelberg is located in the highly populated and industrialized upper Rhine valley in southwestern Germany. The CO data are used in combination with hourly carbon monoxide (CO) observations to estimate regional hourly fossil fuel CO (ΔFFCO) mixing ratios. We investigate three different C calibration schemes to calculate ΔFFCO: (1) the long-term median ΔCO/ΔFFCO ratio of 14.6 ppb ppm (mean: 15.5 ± 5.6 ppb ppm), (2) individual (2-)week-long integrated ΔCO/ΔFFCO ratios, which take into account the large week-to-week variability of ±5.6 ppb ppm (1σ; interquartile range: 5.5 ppb ppm), and (3) a calibration which also includes diurnal changes of the ΔCO/ΔFFCO ratio. We show that in winter a diurnally changing ΔCO/ΔFFCO ratio provides a much better agreement with the direct C-based hourly ΔFFCO estimates whereas summer values are not significantly improved with a diurnal calibration. Using integrated CO samples to determine weekly mean ΔCO/ΔFFCO ratios introduces a bias in the CO-based ΔFFCO estimates which can be corrected for with diurnal grab sample data. Altogether our C-calibrated CO-based method allows determining ΔFFCO at a semi-polluted site with a precision of approximately ±25%. [ABSTRACT FROM AUTHOR]

The climate response to increased CO2 concentration is generally studied using climate models that have finite spatial and temporal resolutions. Different parameterizations of the effect of unresolved processes can result in different representations of small-scale fluctuations in the climate model. The representation of small-scale fluctuations can, on the other hand, affect the modeled climate response. In this study the mechanisms by which enhanced small-scale fluctuations alter the climate response to CO2 doubling are investigated. Climate experiments with preindustrial and doubled CO2 concentrations obtained from a comprehensive climate model [ECHAM5/Max Planck Institute Ocean Model (MPI-OM)] are analyzed both with and without enhanced small-scale fluctuations. By applying a stochastic model to the experimental results, two different mechanisms are found. First, the small-scale fluctuations can change the statistical behavior of the global mean temperature as measured by its statistical damping. The statistical damping acts as a restoring force that determines, according to the fluctuation–dissipation theory, the amplitude of the climate response to a change in external forcing (here, CO2 doubling). Second, the small-scale fluctuations can affect processes that occur only in response to the CO2 increase, thereby altering the change of the effective forcing on the global mean temperature. [ABSTRACT FROM AUTHOR]

In both the private and public sectors, green hydrogen is treated as a promising alternative to fossil energy commodities. However, building up production capacities involves significant carbon production, especially when considering secondary infrastructure, e.g., renewable power sources. The amount of required capacity as well as the carbon production involved is calculated in this article. Using Germany as an example we show that the switch to purely green hydrogen involves significant bow waves in terms of carbon production as well as financial and resource demand. An economic model for an optimal decision is derived and—based on empirical estimates—calibrated. It shows that, even if green hydrogen is a competitive technology in the future, using alternatives like turquoise hydrogen or carbon capture and storage is necessary to significantly reduce or even avoid the mentioned bow waves. [ABSTRACT FROM AUTHOR]

To manage greenhouse gas emissions, directives on renewable energy usage have been developed by the European Commission with the objective to reduce overall emissions by 40% by 2030 which presents a significant potential for renewable energy sources. At the same time, it is a challenge for these energy technologies which can only be solved by integrated solutions. Carbon capture and storage combined with geothermal energy could serve as a novel approach to reduce CO2 emissions and at the same time facilitate some of the negative impacts associated with fossil fuel-based power plants. This study focuses on the technical and economic feasibility of combining these technologies based on a published model, data and market research. In the European Union, Germany is the most energy intensive country, and it also has an untapped potential for geothermal energy in the northern as well as the western regions. The CO2 plume geothermal system using supercritical carbon dioxide as the working fluid can be utilized in natural high porosity (10–20%) and permeability (2.5 × 10−14–8.4 × 10−16 m2) reservoirs with temperatures as low as 65.8 °C. The feasibility of the project was assessed based on market conditions and policy support in Germany as well as the geologic background of sandstone reservoirs near industrialized areas (Dortmund, Frankfurt) and the possibility of carbon capture integration and CO2 injection. The levelized cost of electricity for a base case results in € 0.060/kWh. Optimal system type was assessed in a system optimization model. The project has a potential to supply 6600/12000 households with clean energy (electricity/heat) and sequester carbon dioxide at the same time. A trading scheme for carbon dioxide further expands potential opportunities. [ABSTRACT FROM AUTHOR]

A significant reduction in greenhouse gas emissions will be necessary in the coming decades to enable the global community to avoid the most dangerous consequences of man-made global warming. This fact is reflected in Germany's 7th Federal Energy Research Program (EFP), which was adopted in 2018. Direct Air Capture (DAC) technologies used to absorb carbon dioxide (CO2) from the atmosphere comprise one way to achieve these reductions in greenhouse gases. DAC has been identified as a technology (group) for which there are still major technology gaps. The intention of this article is to explore the potential role of DAC for the EFP by using a multi-dimensional analysis showing the technology's possible contributions to the German government's energy and climate policy goals and to German industry's global reputation in the field of modern energy technologies, as well as the possibilities of integrating DAC into the existing energy system. The results show that the future role of DAC is affected by a variety of uncertainty factors. The technology is still in an early stage of development and has yet to prove its large-scale technical feasibility, as well as its economic viability. The results of the multi-dimensional evaluation, as well as the need for further technological development, integrated assessment, and systems-level analyses, justify the inclusion of DAC technology in national energy research programs like the EFP. [ABSTRACT FROM AUTHOR]