Search

Accelerometers based on outputting amplitude ratios in weakly coupled resonators (WCRs) are attractive because their parametric sensitivity is higher by two or three orders of magnitudes than those based on outputting frequency. However, the impact of temperature on the coupler is a key factor in accelerometer applications. This paper proposed a novel mode-localized WCR accelerometer with a temperature compensation mechanism, with sensitive elements incorporating a double-ended tuning fork (DETF) resonator, clamped–clamped (CC) resonator, and a micro-lever coupler. The DETF out-of-phase mode is utilized, which is only sensitive to temperature, to measure the temperature change of WCRs and complete the temperature compensation using the compensation algorithm. This proposed method has no time delay in measuring the temperature of sensitive elements and no temperature difference caused by the uneven temperature field. The parametric sensitivity in amplitude ratio (AR) to acceleration drifting with temperature was theoretically analyzed, and the novel device was designed and fabricated by a silicon-on-glass process. Both simulation and experiment results demonstrated that the coupling stiffness drifted with temperature, which resulted in the drifts of its sensitivity to acceleration and zero-bias stability. Using the intrinsic mode of WCRs, in terms of the DETF out-of-phase mode, as an in situ thermometer and carrying out the temperature compensation algorithm, the drift of zero bias could be suppressed from 102 mg to 4.5 mg (g is the gravity acceleration), and the drift of the parameter sensitivity in AR was suppressed from 0.74 AR/g to 0.02 AR/g with the temperature range from 330 K to 370 K and acceleration range from 0 g to 0.2 g.

Mode-localized sensing paradigms applied to accelerometers have recently become popular research subjects. However, the output of mode-localized accelerometers is influenced by environment temperature due to the difference in the thermal properties of the coupling resonators and the temperature dependence of coupling stiffness. To improve the performance of mode-localized accelerometers against temperature, we proposed an in situ self-temperature compensation method by utilizing the resonant frequency besides of amplitude ratios, which can be implied online. Experimental results showed that there were nearly 79-times and 87-times improvement in zeros bias and scale factor, respectively.

High-sensitivity MEMS magnetoresistive (MR) sensors have attracted ever-increasing attention due to their ability to detect weak magnetic fields, but the resolution is severely limited by the [Formula: see text] noise. This paper reports a MEMS MR sensor that can effectively suppress the [Formula: see text] noise by modulating the magnetic field signal to the higher frequency region utilizing magnetic tunnel junction vertical motion modulation based on the MEMS piezoelectric cantilever resonator. The magnetic sensitivity can be increased to 2283.3%/mT with a high magnetic gain of 39.3 by integrating the structure-optimized fixed magnetic flux concentrators. The signal-to-noise ratio of the MEMS MR sensor can be improved by three orders of magnitude and the 160 pT/√Hz resolution can be reached. These results make the MEMS MR sensor based on the MTJ motion modulation a competitive candidate in the pico-Tesla magnetic detection.