Search

This paper presents a novel seven-level inverter topology for medium-voltage high-power applications. It consists of eight active switches and two inner flying capacitor (FC) units forming a similar structure as in a conventional active neutral-point-clamped (ANPC) inverter. This unique arrangement reduces the number of active and passive components. A simple modulation technique reduces cost and complexity in the control system design without compromising reactive power capability. In addition, compared to major conventional seven-level inverter topologies, such as the neutral point clamped, FC, cascaded H-bridge, and ANPC topologies, the new topology reduces the dc-link voltage requirement by 50%. This recued dc-link voltage makes the new topology appealing for various industrial applications. Experimental results from a 2.2-kVA prototype are presented to support the theoretical analysis presented in this paper. The prototype demonstrates a conversion efficiency of around 97.2% ± 1% for a wide load range. [ABSTRACT FROM AUTHOR]

The output voltage of power electronic converters is a very important quantity for dynamic control of power electronic systems. In electrical drives without electromechanical position or speed sensor, the terminal reference voltage is used to obtain the rotor position. Dead-time effects and semiconductor voltage drop lead to distortion in the actual output voltage and degrade the control performance when the back electromotive force magnitude is low. Thus, for stable low-speed operation, output voltage sensing becomes necessary. Due to the switching nature of power electronic systems, this is not a trivial task, especially when instantaneous measurement of the terminal voltage is required. In this paper, an instantaneous switching-period average voltage sensing technique is proposed that utilizes a combined approach of oversampling and filtering. Based on the theoretical analysis of the sampling- and filter-induced measurement distortion, a general solution for an optimal filter design is derived. The additional sensing circuit is integrated into the low-side gate driver of the converter outputs. This paper includes details about the hardware implementation and extensive verification measurements. [ABSTRACT FROM AUTHOR]

In order to reduce switching loss of neutral point clamped three-level inverter (NPC TLI), generally discontinuous pulsewidth modulation (DPWM) is used. But it can result in dc offset and ac ripple on neutral point (NP) voltage. So a novel pulse sequence DPWM (NPSDPWM) is proposed to reduce switching loss and control NP voltage simultaneously in this paper. NP voltage is controlled by choosing proper clamping modes. To avoid unexpected switching action during changing clamping mode, an improved pulse sequence is also presented. The switching loss and NP voltage ripple of NPSDPWM, traditional and proposed DPWM in previous literature are compared, respectively. The experimental results show that NPSDPWM has well NP voltage control ability and the switching losses are reduced effectively. [ABSTRACT FROM AUTHOR]

Three-level neutral-point-clamped (NPC) inverters are being widely adopted in low-voltage low-power applications. For an intended application, the modulation strategy and the operating conditions are the two key factors that highly influence the major performance indices of the NPC inverter, such as efficiency, harmonic distortion, and voltage oscillations at neutral point (NP). Considering dynamic loading applications where the operating point varies significantly, this paper proposes an improved adjustable pulsewidth modulation (PWM) strategy for a three-level NPC inverter that can alter its modulation pattern to meet desired performance objectives for the full operation range. It has been shown that by varying two control parameters namely discontinuity control parameter and bias control parameter, the proposed modulation strategy changes its pattern between the most efficient generalized discontinuous PWM to NP oscillations-free partial dipolar PWM strategy. Additionally, to obtain a tradeoff between the performance parameters—efficiency, NP oscillations, and waveform quality—The proposed strategy has the ability to settle at the intermediate modulation patterns by transforming into a hybrid modulation signal. Furthermore, considering NP voltage unbalance mitigation as major technical challenge in adjustable modulation strategy, a voltage unbalance compensator that exhibits satisfactory balancing performance for the entire variations of modulation patterns and operating conditions has also been presented. The performance of the proposed modulation strategy in conjunction with voltage unbalance compensator has been evaluated in simulation by widely varying the speed and load of induction motor, and verified in experimentation. [ABSTRACT FROM AUTHOR]

To reduce the common-mode voltage (CMV) and eliminate the CMV spikes for two-level voltage source inverters (2L-VSIs), an improved model predictive control (MPC) based CMV reduction method is proposed in this paper considering dead-time effects. First, an improved voltage vector (VV) preselection strategy is proposed to reduce the CMV spikes caused by the dead time. Second, a new hybrid VV preselection strategy based on a delay compensation strategy and a modified current sector division strategy is proposed to completely eliminate the CMV spikes. As the proposed hybrid VV preselection based MPC strategy makes full use of the six nonzero VVs of the 2L-VSI, the current total harmonic distortions and ripples are reduced. The simulation and experiments are carried out to verify the effectiveness of the proposed strategy. [ABSTRACT FROM AUTHOR]

This paper presents new space vector pulsewidth modulation (PWM) strategies for a single-phase three-level buck-boost neutral point clamped inverter coupled with impedance-source (IS) network. These strategies can be implemented for systems with any IS network with neutral point. The case study system is based on the quasi-Z-source inverter with continuous input current. To demonstrate an improved performance, the strategies are compared with a traditional PWM strategy. The advantages lie in reduced switching number, without output voltage quality distortion. The simulation and experimental results confirm the theoretical predictions. [ABSTRACT FROM AUTHOR]

Common-mode voltage (CMV) problem brings severe negative effects in three-phase voltage source inverters (VSIs), particularly for high-frequency silicon (Si) carbide (SiC) VSIs. However, most traditional CMV reduction strategies, which are studied based on Si VSIs, are hard to be implemented and sacrifice the other performance of the VSIs. To overcome such drawbacks, this paper proposes a novel generalized tri-state pulsewidth modulation (GTSPWM) for high-frequency SiC VSIs over power factor of 0–1 and whole linear modulation index range. The working principle of conventional space vector based reduced CMV PWM (RCMV-PWM) methods are reviewed, and their switching signals and CMV patterns are illustrated. The proposed GTSPWM method is described in a generalized scalar PWM approach for simple application and compared with other RCMV-PWM methods. Mathematical analysis, simulations, and experimental results have been used to verify that GTSPWM based high-frequency SiC VSIs can achieve minimum switching losses, improved output waveform quality, smaller dc-link current ripples, and RCMV characteristics. Moreover, with the usage of GTSPWM method, the switching frequency of SiC VSIs can be further increased, and the performance of high-frequency SiC VSIs could be improved appreciably. [ABSTRACT FROM AUTHOR]

In this paper, a novel space-vector pulsewidth modulation technique for a five-level active neutral-point clamped (5L-ANPC) inverter is proposed to eliminate the common-mode voltage (CMV). For the 5L-ANPC inverter, which produces a good output voltage performance and lowdv/dt, the total 125 voltage vectors can be generated, among which the proposed scheme employs only 19 voltage vectors producing a zero CMV. Due to the limitation of voltage vectors selected, the dc-link capacitor voltages of the 5L-ANPC inverter cannot be balanced by themselves. Therefore, the capacitor voltages of the inverter should be controlled by choosing the redundant switching states appropriately. The validity of the proposed modulation scheme has been verified by simulation and experimental results. [ABSTRACT FROM AUTHOR]

This paper proposes the new clamping angle control (CAC) pulse width modulation (PWM) method to restore its maximum linear modulation range of voltage source inverters (VSIs) reduced by the duty ratio limitation in hardware implementation, which makes the VSIs to operate nonlinearly in the high modulation range. The deadtime and the bootstrap gate driver circuit mainly cause this duty ratio limitation in practice. In particular, the bootstrap gate driver circuit is used in many industrial applications by avoiding the additional power supply to apply the gate-source voltage of power switches, and therefore making the VSIs to be small size with the low cost. First, the proposed CACPWM method is theoretically analyzed. Then, it is applied in the high modulation range to overcome the limitation of the duty ratio due to the use of the bootstrap gate driver circuit. Thereafter, its practical effectiveness is verified by both simulation and experimental tests. Also, the resulting harmonic distortions are compared with those by the conventional PWM methods. [ABSTRACT FROM AUTHOR]

An adaptive control of DPWM implementable in clamped-three-level inverters with two strings of photovoltaic (PV) panels in cascaded connection is proposed in this paper. The proposed modulation is developed based on the so-called circuit-level decoupling concept. It is able to provide balance line voltage even under unbalanced dc links. The unequal dc voltages appeared due to asymmetric maximum point of power trackings (MPPTs) are controlled by proper injection of zero-sequence voltage to the common mode voltage, while the total dc voltage is regulated based on the voltage commands generated by the MPPT of each string. Thus, both PV strings are able to be operated based on their MPPTs while there is almost no low-order harmonic distortion at the inverter output current. Compared with the previous methods, the high capability of the proposed method is evaluated by simulation study and experimental tests. [ABSTRACT FROM AUTHOR]

In this paper, a three-level quasi-switched boost T-type inverter (3L qSBT2I) is proposed. A new pulse-width modulated (PWM) control method is presented to reduce the inductor current ripple of the qSBT2 I. In the introduced PWM technique, the shoot-through duty cycle is maintained constant to keep the modulation index as high as possible. Then, the only control parameters of the qSBT2I are the duty cycles of the two additional switches. By controlling the duty cycles of the two additional switches, the voltage gain of the proposed qSBT2 I can be improved to a value larger than that of the conventional 3L impedance source inverters. The steady-state analysis, operating principles, and comparisons with the impedance source-based 3L inverters are presented. A 1-kW prototype is constructed to verify the operating principle of the 3L qSBT2I. An indirect dc-link voltage regulator and a capacitor voltage-balance controller are applied to the proposed qSBT2I. Simulation and experimental results are presented. [ABSTRACT FROM AUTHOR]

This paper investigates a multilevel inverter composed of series/parallel-connected H-bridges. The presented structure can be used for applications in which the use of semiconductor switches with low-voltage and low-current ratings is intended. A comprehensive system model, an overall control strategy to adjust the output voltage with constant magnitude and frequency, and a level-shifted PWM (LS-PWM) strategy based on a voltage vectors unidimensional analysis and a plane analysis are presented. The LS-PWM is capable of mitigating the low-frequency circulating current, thus generating multilevel voltage signals with low harmonic distortion, maximum number of levels, and low dv/dt. In addition, considering a wide range of values of voltages and currents and various power levels, the total converter losses are reduced compared with the conventional multilevel converters. Two multilevel conventional inverters with the same number of semiconductor switches are used for comparison. Simulation and experimental results demonstrate the feasibility of the studied converter. [ABSTRACT FROM AUTHOR]

An optimal current control strategy for asymmetrical hybrid multilevel inverters (MLIs) is proposed in this paper enabling their use on motor drives, static synchronous compensators, and photovoltaic and wind generators, where a fast and precise current regulation is required. A key feature of these highly efficient converters is that an ac machine (motor or transformer) operates according to an open-end winding configuration, connected on one side to a main MLI and, on the other side, to an auxiliary two-level inverter (TLI). The first efficiently controls the main power stream operating at a low switching frequency, while the TLI acts as an active power filter, exploiting a conventional high-frequency two-level pulsewidth modulation (PWM) technique. The proposed control scheme optimally exploits the key features of the two inverters by suitably sharing the control task. In fact, a predictive current control is assigned to the MLI, which can be accomplished by low switching frequency operations, while the high switching frequency of the PWM-operated TLI is exploited to accomplish a fast and precise closed-loop current control, processing only a part of the power stream flowing through the system, thus producing low power losses. Simulations and experimental results confirm the consistency of the proposed approach. [ABSTRACT FROM AUTHOR]

In order to prevent the power switching devices (e.g., an insulated-gate bipolar transistor, IGBT) from shoot-through in voltage-source converters during a switching period, the dead time is added either in the hardware driver circuits of the IGBTs or implemented in software in pulse width modulation (PWM) schemes. Both solutions will contribute to a degradation of the injected current quality. As a consequence, the harmonics induced by the dead time (referred to as “dead-time harmonics” hereafter) have to be compensated in order to achieve a satisfactory current quality, as required by standards. In this paper, the emission mechanism of dead-time harmonics in single-phase PWM inverters is, thus, presented considering the modulation schemes in detail. More importantly, a repetitive controller has been adopted to eliminate the dead-time effect in single-phase grid-connected PWM converters. The repetitive controller has been plugged into a proportional-resonant-based fundamental-frequency current controller so as to mitigate the dead-time harmonics and also to maintain the control of the fundamental-frequency grid current in terms of dynamics. Simulations and experiments are provided, which confirm that the repetitive controller can effectively compensate the dead-time harmonics and other low-order distortions, and also, it is a simple method without hardware modifications. [ABSTRACT FROM AUTHOR]

This paper presents a hybrid pulse width modulation-based discontinuous modulation (D-HPWM) strategy with dc-link voltage balancing for a three-level neutral-point-clamped (NPC) traction inverter drive. The results are then compared with continuous-hybrid-PWM (C-HPWM) to check the performance improvement. The HPWM strategy uses both the advantages of carrier- and space-vector-based PWM strategies. The duty cycles are generated using the carrier-based strategy to reduce the computational time and complexity of the system and redundant vector states are used to keep the two dc-link capacitor voltages balanced. As discontinuous PWM (DPWM) reduces the switching losses considerably compared to the continuous PWM, the DPWM strategy is developed in this paper for the HPWM-based strategy. Detailed comparison studies are then carried out in MATLAB/Simulink and PLECS to show the conduction and switching loss distribution with change in modulation index for different power switches. A 54.0-kW surface permanent magnet synchronous machine (PMSM) is used for this simulation studies. Moreover, the total inverter loss and losses in each insulated gate bipolar transistor (IGBT) are also compared. Detailed experimental performance analysis is also carried out with a scaled down prototype of a 6.0-kW surface PMSM, NPC inverter, and real-time emulator DSpace, to show the capacitor voltage deviation with both control strategies. [ABSTRACT FROM PUBLISHER]

A new pulsewidth modulation (PWM) strategy which is an alternative approach of the discontinuous PWM (DPWM) for a three-level neutral-point-clamped (NPC) inverter is proposed in this paper. A three-level NPC inverter is completely mature and very well-established topology in high-power applications. However, the three-level NPC inverter has an inheritance problem of the neutral-point voltage unbalancing due to the split dc-link capacitors. This structure can cause large neutral-point voltage ripple. Furthermore, output currents of the three-level NPC inverter are distorted by the neutral-point voltage ripple. Therefore, the neutral-point voltage must be controlled. In this paper, a new DPWM method using two different offsets for the neutral-point ripple reduction is proposed and the effectiveness of the proposed DPWM method is verified by using the simulation and the experimental results. [ABSTRACT FROM PUBLISHER]

This paper presents an improved dc-link voltage balancing algorithm for a three-level neutral-point-clamped inverter by considering phase current direction. Detailed studies on the effects of change in load current direction on the dc-link capacitor voltages are presented. A maximum value of power factor is numerically derived, above which it affects the capacitor voltage balancing capability. Compared with the previously presented research work, the inputs to the space-vector pulsewidth-modulation block are the three phase currents and the difference between the two capacitor voltages. Depending on the states of the two dc-link capacitor voltages and phase current direction, redundant voltage vector sequences are selected. The selected vectors keep the capacitor voltage deviations within 5% of the total dc-link voltage. Two zero switching vectors (i.e., PPP and NNN) are also removed from all subsectors of the earlier proposed strategy, which one used to produce higher common-mode voltages. Detailed simulation and experimental results are presented in this paper for a 6.0-kW surface permanent-magnet synchronous machine. Both the simulation and experimental results show the required performance of the proposed system. [ABSTRACT FROM AUTHOR]

In order to solve the neutral-point voltage unbalancing problem for three-level inverters, this paper proposes a method to balance the neutral-point voltage for three-level inverters with variable modulation wave offset sinusoidal pulse-width modulation (SPWM) control. Based on the mathematical expressions of neutral-point voltage unbalancing, the factors are studied, which affect the fluctuation of neutral-point voltage. Theoretically the mathematical expressions of the neutral-point voltage with the proposed method are derived, and the mathematical relationship between the fluctuation of neutral-point voltage and the adjusting offset of modulation wave is studied. This proposed method realizes controlling the neutral-point voltage balance by dynamically calculating the offset superimposed to the modulation wave based on SPWM (DCOSPWM). This DCOSPWM method is very simple, which has good steady-state performance and is easy for digital implementation. The simulation results verify the correctness of the theoretical analysis in this paper, and the feasibility and effectiveness of this method is verified by the experiments in the experimental platform of neutral point clamped three-level inverters based on digital signal processor (DSP)-complex programmable logic device (CPLD). [ABSTRACT FROM AUTHOR]

According to the number of segments, the space vector modulation (SVM) can divide into conventional SVM sequence (CSVMS) and special SVM sequence (SSVMS). It is well known that SVM can be equivalently realized by carrier-based pulse width modulation (CBPWM) with a zero component injection in both two-level and three-level inverters. For eight segment CSVMS in three-level inverters, many papers have ever got the injected zero component equation. But similar approach does not work for SSVMS, which has more than eight segments, e.g., 10, 12, or 14. What more, the accurate injected zero component has never been achieved so far. To solve above problems, therefore, a generated decomposition method of modulation wave has been proposed in this paper. By strict theoretical derivation, the same correlation can be extended to SSVMS and the corresponding zero component expression can be acquired. Based on this method, this paper puts a lot attention on the essential feature explanation, mathematical proof, and gives a detailed process to get the zero component equation, using it can realize SSVMS by CBPWM. The simulation and experimental results illustrate that the generated decomposition method of modulation wave is correct, and the unified theory of CBPWM and SVM is verified. [ABSTRACT FROM AUTHOR]

In this paper, we propose model predictive control methods to reduce the common-mode voltage of three-phase voltage source inverters (VSIs). In the reduced common-mode voltage-model predictive control (RCMV-MPC) methods proposed in this paper, only nonzero voltage vectors are utilized to reduce the common-mode voltage as well as to control the load currents. In addition, two nonzero voltage vectors are selected from the cost function at every sampling period, instead of using only one optimal vector during one sampling period. The two selected nonzero vectors are distributed in one sampling period in such a way as to minimize the error between the measured load current and the reference. Without utilizing the zero vectors, the common-mode voltage controlled by the proposed RCMV-MPC algorithms can be restricted within ±Vdc/6. Furthermore, application of the two nonzero vectors with optimal time sharing between them can yield satisfactory load current ripple performance without using the zero vectors. Thus, the proposed RCMV-MPC methods can reduce the common-mode voltage as well as control the load currents with fast transient response and satisfactory load current ripple performance compared with the conventional model predictive control method. Simulation and experimental results are included to verify the effectiveness of the proposed RCMV-MPC methods. [ABSTRACT FROM AUTHOR]

Exploiting the rich switching redundancies of the dual inverter, new hybrid pulsewidth-modulation (PWM) switching methods are proposed in this paper using the degree of freedom of operating the individual inverters independently, in addition to exercising the degree of freedom of controlling the switching action of the individual legs independently. Two voltage entities, namely, common-mode voltage (CMV) and differential-mode voltage are identified in the dual inverter, and all hybrid PWMs are envisaged aimed at reducing and also eliminating the CMV in it. The effects of such attempts on motor shaft voltage and also the motor bearing currents are presented in detail. Furthermore, bearing current profiles of an open-end winding induction motor are also presented with both conventional and hybrid PWMs proposed in this paper. Electric discharge machining discharge currents are completely eliminated with the use of all hybrid PWM methods proposed in this paper. In addition, implications of completely eliminating the CMV are also presented in this paper. All hybrid PWMs proposed in this paper are first simulated using MATLAB and are experimentally verified on a dual two-level inverter feeding a 1.1-kW 415-V 3- $\phi$ open-end winding induction motor drive. [ABSTRACT FROM PUBLISHER]

This paper presents a new multilevel selective harmonic elimination pulse-width modulation (MSHE-PWM) technique for transformerless static synchronous compensator (STATCOM) system employing cascaded H-bridge inverter (CHI) configuration. The proposed MSHE-PWM method optimizes both the dc-voltage levels and the switching angles, enabling more harmonics to be eliminated without affecting the structure of the inverter circuit. The method provides constant switching angles and linear pattern of dc-voltage levels over the modulation index range. This in turns eliminates the tedious steps required for manipulating the offline calculated switching angles and therefore, easing the implementation of the MSHE-PWM for dynamic systems. Although the method relies on the availability of the variable dc-voltage levels which can be obtained by various topologies, however, the rapid growth and development in the field of power semiconductor devices led to produce high-efficiency dc-dc converters with a relatively high-voltage capacity and for simplicity, a buck dc-dc converter is considered in this paper. Current and voltage closed loop controllers are implemented for both the STATCOM and the buck converter to meet the reactive power demand at different loading conditions. The technique is further compared with an equivalent conventional carrier-based pulse-width modulation to illustrate its enhanced characteristics. The effectiveness and the theoretical analysis of the proposed approach are verified through both simulation and experimental studies. [ABSTRACT FROM AUTHOR]

This paper presents the direct compensation of the switching interval error of the effective voltage vectors by the dead time of a pulsewidth modulation voltage source inverter (PWM-VSI). The output voltages of a three-phase PWM-VSI are distorted and have voltage errors from the dead time to avoid the shoot-through of inverter arms and the time delay of the gate drive. Voltage distortion increases the harmonics of the output voltages and decreases control performance. This paper presents a simple and direct compensation technique to solve this problem in a three-phase VSI. The practical switching output voltages are determined by the dc-link voltage, the switching signals of each phase, the dead time, the time delay, and the current polarities of each phase. For these reasons, output voltage errors are not constant. In order to analyze the dead-time effect in the actual switching voltages of each phase, the practical switching voltages in a sampling period of a space vector PWM (SVPWM) method are calculated according to the current polarity. In the calculation, the dead time, the time delay of devices, and the voltage drops on power devices are included to consider nonlinear voltage distortion. From these practical switching voltages during the switching intervals in a sampling period, the average output voltages of each phase can be derived, and the output voltage errors between the voltage commands and the average output voltages of each phase are obtained. The SVPWM switching intervals of each phase can be derived by the average output voltages that are calculated according to the current polarity and nonlinear voltage distortion to compensate for the output voltage errors. With the simple detection of the current polarity, the practical errors of the switching intervals of each phase can be compensated by the addition of the compensated switching time. Simulation and experimental results validating the proposed compensation method are presented in this paper. [ABSTRACT FROM AUTHOR]

A two-motor drive, supplied by a five-leg inverter, is considered in this paper. The independent control of machines with full dc-bus voltage utilization is typically achieved using an existing pulsewidth modulation (PWM) technique in conjunction with field-oriented control, based on PI current control. However, model predictive control (MPC), based on a finite number of control inputs [finite-control-set MPC (FCS-MPC)], does not utilize a pulsewidth modulator. This paper introduces three FCS-MPC schemes for synchronous current control in this drive system. The first scheme uses all of the available switching states. The second and third schemes are aimed at reducing the computational burden and utilize a reduced set of voltage vectors and a duty ratio partitioning principle, respectively. Steady-state and transient performances are analyzed and compared both against each other and with respect to the field-oriented control based on PI controllers and PWM. All analyses are experimental and use the same experimental rig and test conditions. Comparison of the predictive schemes leads to the conclusion that the first two schemes have the fastest transient response. The third scheme has a much smaller current ripple while achieving perfect control decoupling between the machines and is of low computational complexity. Nevertheless, at approximately the same switching loss, the PI-PWM control yields the lowest current ripple but with slower electrical transient response. [ABSTRACT FROM PUBLISHER]

This paper discusses the use of a cascaded multilevel converter for flexible power conditioning in smart-grid applications. The main feature of the proposed scheme is the use of independent dc links with reduced voltages, which makes such a topology an ideal candidate for medium- and high-power applications with increased reliability. The developed control strategy regulates independent dc-link voltages in each H-bridge cell, and allows the selective and flexible compensation of disturbing currents under a variety of voltage conditions without requiring any reference frame transformation. The selective control strategies are based on the decompositions proposed in the conservative power theory, which result in several current-related terms associated with specific load characteristics. These current components are independent of each other and may be used to define different compensation strategies, which can be selective in minimizing particular effects of disturbing loads. Experimental results are provided to validate the possibilities and performance of the proposed control strategies, considering ideal and deteriorated voltage conditions. [ABSTRACT FROM PUBLISHER]

This paper introduces series work of common-mode (CM) voltage reduction for the paralleled inverters. The paralleled inverters’ phase-legs are connected through coupling inductors and the combined three-phase currents are provided to the load. Interleaving is an approach to reduce the CM voltage for the paralleled inverters but it cannot eliminate CM voltage. A novel pulse-width-modulation (PWM) method for paralleled inverters which can theoretically achieve zero CM voltage is developed. Considering the basic voltage vectors in each inverter, novel paralleled voltage vectors which have zero CM voltage are proposed to combine the reference voltage vector. The action time's distribution and voltage vectors’ sending sequence for each inverter are also introduced. The proposed PWM method can make sure the voltage of the two inverters are balanced in each switching cycle and limits the circulating current through small coupling inductors. Similar to interleaving space vector PWM, the proposed zero CM PWM also has the ability to reduce the output current ripple and electromagnetic interference (EMI). Simulation and experimental results are provided to show the advantage of paralleled inverters in CM voltage reduction and validate the proposed method has good performance to reduce CM current and CM EMI noise. [ABSTRACT FROM PUBLISHER]

This paper aims to investigate a disturbance-rejection-based model predictive control (MPC) with two flexible modes (i.e., unconstrained mode and constrained mode) for three-phase inverters with an $LC$ filter. A disturbance observer (DOB) is designed to both simplify the prediction model and achieve the robustness against uncertain parameters. First, the unconstrained mode is designed with a simple horizon-one MPC control law to precisely regulate the output voltage in the steady state. Next, the constrained mode is designed with long-horizon MPC to quickly drive the system to the unconstrained mode by further optimizing the modulation stage. Also, the proposed MPC ensures the robustness and optimality in all operating modes. Especially, the overall closed-loop stability with DOB dynamics is proven by using Lyapunov function. Unlike other MPC methods, the long-horizon MPC in the constrained mode is specialized by finite switching sequences of the sector-based space vector modulation. Comparative studies with the conventional linear quadratic regulator are conducted on a prototype test bed with a TI TMS320F28335 DSP. Then, the proposed MPC method verifies fast dynamic response and advanced voltage regulation (i.e., small steady-state errors and low total harmonic distortion) under various load conditions and uncertain parameters. [ABSTRACT FROM AUTHOR]

Compared with multilevel space vector modulation, level-shifted multicarrier sinusoidal pulsewidth modulation (SPWM) for nested neutral point-clamped (NNPC) inverters requires much less calculations and implementation efforts, but the existing conventional SPWM cannot suppress the severe flying-capacitor (FC) voltage ripples under low output-frequency conditions. In order to solve this problem, a multicarrier-based PWM strategy with complete voltage balance control (VBC) capacity is proposed in this paper. For NNPC inverters operating under low output-frequency conditions, two preprocessing steps, the zero-sequence injection and the modulation-signal rearrangement, are proposed before the comparisons between level-shifted carriers and modulating signals. These preprocessing steps make the average currents flowing through FCs zero, which is beneficial to greatly reduce the FC voltage ripples under low output-frequency conditions. Together with additional VBC, the proposed modulation can assure the FC voltages balanced under the entire output-frequency conditions. Principles and implementation processes of proposed modulation techniques and VBC methodsare elaborated in detail and compared with conventional modulation methods. Both simulation results from a 5-MVA system and experimental results based on a 5-kVA platform are presented to verify the effectiveness. [ABSTRACT FROM AUTHOR]

Four-level nested neutral-point clamped (NNPC) inverters experience severe voltage balancing problems under low output-frequency conditions when the conventional four-level space vector modulation (4L-SVM) technique is applied, which limits their wider application. In order to get a complete control of the flying-capacitor voltages, and to alleviate the calculation burden of conventional 4L-SVM, a simplified but effective 4L-SVM technique along with the voltage balance control (VBC) function is proposed in this paper. For low modulation indexes, zero and small vectors are selectively utilized and distributed to force the average charging and discharging time of flying capacitors to be equal to each other during every switching period, so that voltage ripples are greatly reduced to be within an acceptable level under low output-frequency conditions. For high modulation indexes, the simplification of conventional 4L-SVM for NNPC inverters into two-level SVM is proposed to reduce the computation complexity. Principles of the proposed 4L-SVM and VBC are elaborated in detail. The steady-state, transient-state, and VBC performances are investigated and compared with the case where the conventional 4L-SVM is applied. Simulation results of a 5 MVA inverter system and experimental results of a scaled-down 5 kVA inverter system are presented to validate the proposed method. [ABSTRACT FROM PUBLISHER]

An open-end winding machine configuration and a suitable control strategy for medium-voltage ac motor drives applications are proposed in this paper in order to reduce the distortion of phase voltages in multilevel inverters (MLIs). Differently than standard open-end winding configurations, where two inverters provide active power to both sides of the stator winding, a main MLI supplies in this case the machine on one side, while an auxiliary two-level inverter acts as active power filter on the other side. A high efficiency step modulation manages the MLI, while the auxiliary unit is pulse width modulation (PWM) operated. As the phase current harmonic content is improved, the torque ripple is reduced and the drive efficiency is increased. By exploiting the proposed approach, the apparent switching frequency of the system is that typical of a PWM inverter, although the main unit is operated according to a voltage step modulation strategy. Simulation and experimental results confirm the consistency of the proposed methodology. [ABSTRACT FROM PUBLISHER]

This paper introduces a new concept of common mode voltage cancellation for pulse width modulated motor drives, aiming at solving issues such as ground leakage current, common mode electromagnetic interference, and bearing current. The balanced inverter topology and dual-winding stator configuration are proposed as a practical realization. Implementation considerations on the influence of circuit asymmetry are also investigated. Finally, a gallium nitride HEMT based induction motor drive prototype is built and tested to evaluate the performance of the cancellation concept in a practical situation. [ABSTRACT FROM AUTHOR]

The six-step operation of surface-mounted permanent magnet machine drives in a flux weakening region has many advantages compared to the pulse width modulation mode, such as the reduced switching loss and fully utilized inverter output voltage. However, if the ratio of the sampling frequency to the fundamental frequency is low in fixed sampling system, the low-frequency oscillation in the current can be incurred in the six-step operation. The low-frequency current causes a system stability problem and reduces system efficiency due to an excessive heat and high power loss. Therefore, this paper proposes the variable time step controller for six-step operation. By updating an output voltage, sampling phase currents, and executing the digital controller synchronized with the variable sampling time, the turn on and off switch signals for six-step operation can be generated at the exact moment. As a result, the low-frequency oscillation in the phase current can be eliminated. In addition, the system transfer function of the proposed control method is discussed for the system stability and system dynamic analysis. The effectiveness of the proposed method is verified by the comparative simulation and experimental results. [ABSTRACT FROM AUTHOR]

Cascaded bidirectional dc–ac converters are commonly used in uninterruptible power supply applications and battery chargers for electric vehicles. Power conversion units for such applications employ a large electrolytic capacitor at high-voltage dc bus, which not only reduces the lifetime but also adds to the weight of the converter. In this paper, a novel bidirectional dual active bridge cascaded three-phase converter (DABCC) with six-pulse dc link is proposed. Also, a new closed-loop control scheme to implement the six-pulse modulation (SPM) technique in DABCC is proposed. The advantages of the proposed control scheme in DABCC are that the electrolytic capacitor is eliminated and is replaced with a low-value film capacitor resulting in increased reliability, compactness, and reduced cost. SPM technique also increases the dc bus utilization and decreases the inverter average switching frequency to 33% when compared with the conventional sine pulse-width modulation (SPWM). Harmonic components introduced in the pole voltages of the SPM-modulated DABCC due to inverter dead time are analyzed, and a resonant controller is designed to mitigate them. Also, root mean square current stress for high-voltage dc-link capacitor is studied, and it is shown that the capacitor requirement for SPM modulation is lower than the conventional SPWM. To validate the proposed control scheme, an 800-W proof-of-concept laboratory hardware prototype is fabricated and experimental results are demonstrated. [ABSTRACT FROM PUBLISHER]

Z-source inverter provides a competitive single-stage dc–ac power conversion with the capability of both buck and boost voltage regulation. In order to maximize voltage gain and to increase efficiency, this paper proposes an improved pulse-width modulation (PWM) strategy. By adjusting the shoot-through duty ratio of one-phase leg, it regulates the average value of intermediate dc-link voltage, which is the same as the instantaneous maximum of three-phase line voltage in one switching time period (Ts) . And the other two-phase legs maintain the fixed switching states. Thus, the equivalent switching frequency of power devices in the inverter bridge is reduced to 1/ 3fs (fs is the frequency corresponding to Ts). The operating principles and closed-loop controller design are analyzed and verified by simulation and experiments. Compared with the existing PWM strategies, the improved PWM (IPWM) strategy demonstrates higher efficiency under full operation range of low voltage gain (1.27-2) application. However, with the IPWM strategy, the inductor current and capacitor voltage contain six-time-line-frequency ripples, which consequently require large size of the passive components when the output frequency is very low. Thus, it is also suitable for 400–800-Hz medium frequency aircraft and vessel power supply system due to a relatively high output line frequency. Furthermore, the idea of IPWM strategy can be extended to other kinds of three-phase impedance network-based inverters. [ABSTRACT FROM PUBLISHER]

In signal injection sensorless drives, the injection voltage cannot be reduced under a certain value. The lower limit of the injection voltage is mainly enforced by the inverter nonlinearity that causes distortion of the injection voltage and degradation of the position estimation performance. After analyzing the inverter nonlinearity during the voltage injection, it is revealed that parasitic capacitances of insulated-gate bipolar transistors have positive effects on inverter output linearity and sensorless control. Based on this analysis, this paper proposes a method to reduce the injection voltage by connecting additional capacitors to the output terminals of the inverter. Simulation and experimental results are provided to verify the effectiveness of the proposed idea. In the experiments, using the capacitor-integrated inverter, it is shown that the injection voltage can be reduced by more than half without degrading the position estimation performance. [ABSTRACT FROM AUTHOR]

Neutral-point (NP)-clamped three-level inverter, which is a widely used topology of multilevel converters, suffers from the NP voltage drift as its main technical drawback. The nearest-three-virtual-vector (\NTV^2) modulation method can control the NP voltage balance for any load over the full range of inverter output voltage. However, compared with the nearest-three-vector (NTV) modulation method, \NTV^2 increases the switching frequency. This paper combines \NTV^2 with NTV, and the two methods are used alternately in a fundamental cycle. The duty-cycle coefficients of the redundant small vectors are analyzed to explore the intervals where NTV can control the NP voltage balance in a fundamental cycle. The proportional parameter, which represents the combination of the two methods in hybrid space vector pulsewidth modulation, can be selected to achieve a high-performance NP balance control and low switching frequency. The steady- and transient-state behaviors of the proposed strategy are analyzed in this paper. The experimental results verify the validity of the proposed strategy. [ABSTRACT FROM PUBLISHER]

In recent years, high photovoltaic array voltage up to 1000 V and transformerless grid-tied inverter have been increasingly researched and applied to elevate the inverter and the dc power collection efficiency. With the same reasons, a three-level neutral point clamped (3L-NPC) inverter featuring low power device voltage stress and low leakage current becomes increasingly attractive. In this paper, the operation and the features of a novel grid-tied 3L-NPC are presented. The proposed topology is a derivative of the three-level stacked neutral point clamped (3L-SNPC) structure. However, compared with the conventional 3L-SNPC and its pulse width modulation (PWM) strategy, the new topology with novel PWM strategy features completely inactive intrinsic body diodes. Furthermore, only two outer power devices are working with switching frequency, while the other four Insulated Gate Bipolar Transistors (IGBTs) are actually with the grid frequency. Therefore, the relatively high switching frequency is selected to reduce the inverter output filter inductance. A hybrid CoolMosfet and IGBT power module configuration is also proposed based on the new PWM strategy. The calculation shows that the total power device losses are reduced. The experimental results are illustrated in this paper to confirm the operation of the proposed topology and controller. [ABSTRACT FROM PUBLISHER]

In this paper, an immune algorithm (IA) is developed for optimization of the harmonic performance of a three-phase inverter under the space-vector pulsewidth-modulation (SVPWM) control strategy. The presented algorithm employs the immune approach as the search method for finding the best optimal control vectors and action time of the three-phase inverter. As a result, the optimal control vectors and action time are calculated to minimize the objective function of the weighted total harmonic distortion of the output voltage waveforms. In addition, an experimental platform based on DSP and field-programmable gate array is built. This paper provides a detailed performance analysis of the method with comparison to the conventional SVPWM. The simulation and experimental results verify the superiority of the best control sequences generated by IA compared with the existing conventional control strategies. [ABSTRACT FROM PUBLISHER]

A new pulse width modulation (PWM) strategy which is an alternative approach of the discontinuous PWM (DPWM) for a three-level neutral-point-clamped (NPC) inverter is developed and presented in this paper. The proposed PWM scheme not only takes advantage of the special properties available in NPC inverters, but also reduces the switching loss of the inverter along with an inherent neutral point (NP) voltage control. Based on a circuit-level decoupling concept, the NPC inverter can be decoupled into two three-level Buck converters in every defined operating section, and thereby the controller design can be simplified. The salient features of the proposed scheme, as compared with the existing carrier-based DPWM strategies, are: 1) its reduced computational processing time, 2) its capability to balance the dc-link voltage without any additional control, and 3) its reduced complexity, e.g., only one carrier wave needed for pulse width modulating. Same as a space-vector modulation, the maximum modulation index, 1.1547, can be attainable by the proposed scheme. Moreover, compared to conventional continuous sinusoidal PWM, using this technique proposed here, the switching losses of the devices can be reduced by one third. In order to explain the operation of this topology properly, the decoupling principle including the driving signal synthesis and the NP potential variation are analyzed in detail in this paper. Finally, the viability and performance of the proposed modulation scheme are shown through simulation and experimental results in a laboratory prototype. [ABSTRACT FROM PUBLISHER]

This paper presents the high-performance quasi-Z-source series resonant dc–dc converter as a candidate topology for the photovoltaic module-level power electronics applications. The converter features a wide input voltage and load regulation range thanks to the multimode operation, i.e., when the shoot-through pulse width modulation and phase-shift modulation are combined in a single switching stage to realize the boost and buck operating modes, respectively. Our experiments confirmed that the proposed converter is capable of ensuring ripple-free 400 V output voltage within the sixfold variation of the input voltage (from 10 to 60 V). The converter prototype assembled achieved a maximum efficiency of 97.4%, which includes the auxiliary power and control system losses. [ABSTRACT FROM AUTHOR]

This paper presents a pulse width modulation strategy for the cancellation of common-mode (CM) voltage generated by three-phase back-to-back two-level inverters. This method theoretically provides complete elimination of the CM voltage by synchronizing all the commutations of one converter with commutations of the other one, so that the overall resulting CM voltage does not vary. The degrees of freedom of this strategy are studied and an experimental implementation is carried out on a 15-kW motor drive prototype to validate the method effectiveness. Taking into account deadtime compensation, measurements in time and frequency domains show that the CM voltage is strongly reduced and that more than 15 dB reduction is achieved in a wide frequency range. [ABSTRACT FROM AUTHOR]

This paper proposes a unique carrier-based pulse width modulation strategy for a three-level neutral-point-clamped inverter that works satisfactorily and with uniform convergence time over the full power factor (PF) range of the load variation. It has excellent control over capacitor voltages and mitigates low-frequency oscillations in the neutral point for the full PF range. First, an investigation is made to see how the load currents get modulated to generate compensating neutral current causing charging and discharging of dc-link capacitors. It is observed that when an additional modulating voltage signal that is in phase with the corresponding phase current is added in each phase, a neutral current is produced in the right direction which can be used to compensate for any prior unbalance in capacitor voltages. It is demonstrated that the performance of this scheme is insensitive to the load PF variation (full range from zero to unity). It performs satisfactorily throughout the entire linear modulation range and eliminates any undesirable low-frequency harmonic component in the compensating neutral current. The effectiveness of the proposed scheme is verified through simulation and experimental results by varying load PF as well as modulation index with both passive and motor loads. [ABSTRACT FROM PUBLISHER]

In this paper, the near-state pulse width modulation (NSPWM), adapted to be used in dual-voltage source inverter (VSI) fed open-end load, is introduced primarily aiming to appreciably minimize the voltage total harmonic distortion (THD). Within the framework of the proposed method, the active time of pulses at the second inverter is relatively adjusted within switching interval (compared to the first VSI). The phase voltage harmonics are formulated for dual-inverter modulated by NSPWM; then, optimal adjustment is identified via a three-dimensional curve of phase voltage THD versus modulation index (MI) and phase angle displacement (PAD). Due to the limitation of MI in NSPWM, the desired output voltage is synthesized with modifying not only MI but also PAD between references of two VSIs. Furthermore, NSPWM inherently takes advantage of better efficiency compared to conventional space vector modulation due to switching only two phases within an interval (by clamping one phase to positive/negative dc-rail). The dual-VSI supplied by two isolated dc sources is assembled in the laboratory to experimentally evaluate the THD reduction feature of the proposed method; also, the simulation results obtained by means of a MATLAB/Simulink environment show close agreement with experimental data. [ABSTRACT FROM PUBLISHER]

Diode-assisted buck–boost voltage-source inverter achieves high voltage gain by introducing a switch-capacitor based high step-up dc–dc circuit between the dc source and inverter bridge. As for the unique structure, various pulse width modulation (PWM) strategies are developed with regard to the chopped intermediate dc-link voltage. In order to maximize voltage gain and increase efficiency, this paper proposes a novel PWM strategy. It regulates the average value of intermediate dc-link voltage in one switching time period ( Ts) the same as the instantaneous maximum value of three-phase line voltage by controlling the front boost circuit. Then, the equivalent switching frequency of power devices in the inverter bridge can be reduced to 1/3fs (fs = 1/Ts). The operating principle and closed-loop controller design are analyzed and verified by simulations and experiments. Compared with existing PWM strategies, the new control strategy demonstrates less power device requirement and higher efficiency in high voltage gain applications. It is a more competitive topology for wide range dc/ac voltage regulation in renewable energy applications. Furthermore, with new control strategy, the dc-side inductor current and capacitor voltage contains six-time line-frequency ripples. To overcome the undesired influence of low frequency ripples, it is also suitable for 400–800 Hz medium frequency aircraft and vessel power supply system. [ABSTRACT FROM PUBLISHER]

In grid-connected inverters, a feedforward controller accurately compensates for a large number of the harmonic components of the injected current. This controller is fast and directly tackles the grid dynamic voltage disturbances without doing any further harmonic analysis. A feedforward controller was introduced to a three-phase grid connection with a wye configuration; however, for the widespread delta connections, such a scheme is less established. Moreover, the nonsinusoidal profile of the grid voltage waveform makes the online conversion of line-to-line values into phase values impossible. In this paper, implicit zero-sequence discontinuous pulse width modulation (IZDPWM) based feedforward control is implemented on the two-level grid-connected inverter. Regardless of the grid topology, the IZDPWM-based controller ensures sinusoidal current injection to the grid under balanced, unbalanced, and distorted conditions. [ABSTRACT FROM PUBLISHER]

Compensation of nonlinear effects generated by dead-time and semiconductors voltage drop has been widely studied in the literature about two-level converters. This paper takes a closer look at those analyses for multilevel converters, specifically for a cascaded H-bridge (CHB) converter modulated with phase-shifted pulse width modulation. The interaction between the cells is analyzed for a generic $n$ -cell converter, from which a general expression for the distortion generated by the nonlinearities has been obtained. Based on this expression, a compensation signal for the overall converter is calculated on each sample time, which is a fraction of the triangular carrier used to modulate each cell, thus significantly improving the quality of the output voltage signals. Experimental validation of the proposed compensation method is presented using a three-phase four-cell CHB converter prototype of 5.5 kW. [ABSTRACT FROM AUTHOR]

This paper identifies the characteristics of a current source inverter operating in discontinuous conduction mode, and proposes a new multiobjective pulse-width modulation (PWM) method to mitigate voltage boosting and harmonic distortion effects. The method takes into account load impedance effects. Controls are also developed to enable transition between the multiobjective PWM method and conventional PWM as the current source inverter operates in discontinuous and continuous modes of operation. The concept is verified experimentally on a 3 kW test bed. [ABSTRACT FROM AUTHOR]

This paper presents a generalized algorithm to eliminate spikes of common-mode voltages (CMV) caused by dead-time effect for common-mode voltage reduction pulse width modulation (CMVRPWM). The characteristics of the CMV spikes for the popular CMVRPWM strategies (AZSPWM1, NSPWM, CRLO-CMVRPWM, and SLO-CMVRPWM) are studied and compared by analyzing the extreme switch pulse patterns. The proposed CMV spikes elimination method directly adjusts the injected zero-sequence voltages instead of the durations of the adopted voltage space vectors to avoid the overlaps of the adjacent dead time periods. The CMV spikes can be eliminated regardless of the output voltages in the dead time periods; thus, the signs of phase currents are not needed to detect and overcome the problem caused by the resolution of the current sensors when the phase currents approach to zero. In addition, an effective method by online selecting low or high active pulses for the three legs is proposed to ensure that at most one leg switches between adjacent carrier periods. The proposed method is generalized and effective for all the CMVRPWM with symmetrical switch pulse patterns and no simultaneous switching problem. The simulation and experimental results validate the effectiveness. [ABSTRACT FROM AUTHOR]

Four-level hybrid-clamped (4L-HC) inverter is a newly proposed topology which is suitable for high-performance medium-voltage drives. Each phase of this topology consists of eight switches and a flying capacitor and the dc-link is split into three parts by two neutral points. In order to ensure the topology operating properly, the voltages across the flying capacitors and three dc-link capacitors should be controlled and maintain balanced at their nominal values. This paper presents a decoupled voltage balancing method for this 4L-HC inverter, including the voltage balancing of dc-link capacitors and flying capacitors. A modified phase-shifted pulse-width modulation method is used to regulate the voltages of flying capacitors and the central dc-link capacitor. The relationship between the neutral-point currents and the output voltage is studied and the upper and lower dc-link capacitor voltages are balanced by injecting an optimum zero-sequence voltage. Simulation and experimental results are presented to verify the validity of this method. [ABSTRACT FROM AUTHOR]

The paper presents an analysis on the output current ripple in zero common-mode voltage (ZCMV) PWM control of multilevel inverters. The modulation strategy for common-mode voltage (CMV) elimination in multilevel inverters is based on the “three zero common-mode vectors” principle. The space vector diagram, which consists of vectors of ZCMV, is fully explored by properly depicting the base voltage vectors and their corresponding active switching vectors. The switching patterns are limited to those of three switching states each of which is symmetrically distributed. Based on the PWM process simplified to that of a two-level inverter with three allowable switching states and the degree of freedom existing in the switching states arrangement, a novel carrier-based pulsewidth-modulated (PWM) method with optimized output current ripple is proposed. Compared to the existing PWM methods which utilize the same kind of switching patterns, the proposed PWM method has reduced considerably the rms current ripple and total harmonic distortion (THD) of the output current in a wide region of the modulation index. The effectiveness of the proposed method is validated by both simulation and experimental results. [ABSTRACT FROM AUTHOR]