Search

In a ${p}$ -channel field-effect-transistor (${p}$ -FET) bridge HEMT device recently realized on a commercial ${p}$ -GaN/AlGaN/GaN-on-Si power HEMT epi-wafer, it is revealed that the device’s reverse-conduction turn-on voltage (${V}_{\text {RT}}$) can be effectively decoupled from the forward threshold voltage (${V}_{\text {TH}}$) of Schottky-type ${p}$ -GaN gate HEMTs. Unlike the conventional Schottky-type ${p}$ -GaN gate HEMTs, of which ${V}_{\text {RT}}$ is closely linked to ${V}_{\text {TH}}$ , the ${p}$ -FET-bridge HEMT enables separate designs of ${V}_{\text {RT}}$ and $V_{\text {TH}}$ so that low-loss reverse conduction and high threshold voltage can be simultaneously realized. In addition, ${V}_{\text {RT}}$ can be further reduced by engineering the AlGaN barrier layer, which will also benefit a lower channel sheet resistance without lowering ${V}_{\text {TH}}$. [ABSTRACT FROM AUTHOR]

Low-loss reverse-conducting normally- OFF double-channel AlGaN/GaN power transistor with the built-in Schottky barrier diode (SBD) has been systematically studied. This device features the MOS-gate section and SBD-anode section paralleled to an interdigital layout along the gate width direction. A common access region that conducts current at both forward and reverse ON-states is employed, which is beneficial to reduce the conduction loss. With a MOS-HEMT/SBD finger width of ${4}~\mu \text{m}/2~\mu \text{m}$ and a total width ratio of 2:1, the device exhibits a threshold voltage of +0.8 V at a drain current of ${10}~\mu \text{A}$ /mm and a low forward ON-resistance of $12.1~\Omega \cdot \text {mm}$. The Schottky metal contacts 2-DEG directly, which results in a low reverse turn-on voltage of −0.6 V (at −1 mA/mm) and low reverse ON-state voltage of −1.7 V (at −50 mA/mm). A leakage suppression MOS field plate (FP) is applied to shield the Schottky contact from the strong electric field, leading to a low OFF-state leakage current of 14 nA/mm at +100-V drain bias and a high breakdown voltage (BV) of +698 V. The finger width and the number of fingers should be optimized. A narrow finger width benefits the current sharing at the access region, while the increasing number of fingers introduces more Schottky depletion regions along the gate width direction that degrade ${R}_{ \mathrm{\scriptscriptstyle ON}}$. [ABSTRACT FROM AUTHOR]

An MOS field plate-protected Schottky-drain (gated Schottky-drain) is successfully integrated on a double-channel AlGaN/GaN MOS-HEMT to provide reverse blocking capability. The leakage suppression MOS field plate is deployed on the etched upper GaN channel layer after a barrier fully recess process, leading to a low reverse OFF-state leakage current of −20 nA/mm (at −100 V). The drain metal is deployed adjacent to the MOS field plate, contacting the upper MOS-channel and lower heterojunction channel from the sidewall. A metal-2DEG Schottky contact with a low turn-ON voltage of 0.5 V is achieved. Since the lower channel (below the MOS field plate) is separated from the etched surface of upper GaN channel layer, a high-conductivity MOS-gated channel with a sheet resistance of 806 $\Omega$ /Square is obtained. The device exhibits a threshold voltage of +0.6 V (at $10~\mu \text{A}$ /mm and +1.9 V from linear extrapolation) and an ON-resistance of ~18 $\Omega {\cdot} \text {mm}$. Besides, a high forward (and reverse) breakdown voltage of 790 V (and −656 V, all at $10~\mu \text{A}$ /mm) is achieved. [ABSTRACT FROM AUTHOR]

An AlGaN/GaN double-channel Schottky barrier diode (DC-SBD) with dual-recess gated anode is demonstrated in this letter. The DC-SBD features two recess steps. The deep one cuts through two channels, and the anode metal contacts 2DEG directly from the sidewall of the recessed heterostructure. The shallow one terminates at the upper channel layer and is located adjacent to the Schottky contact. A MOS field plate is placed on the shallow recess region to pinchoff the underlying channels, so the off-state leakage current of the DC-SBD can be suppressed. Since the lower channel is separated from the etched surface, the field-effect mobility beneath this MOS structure shows a high peak value of 1707 cm2/( \text V\cdot \text s ). The DC-SBD with an anode-to-cathode length ( L\text {ac} ) of 15~\mu \textm exhibits a turn-on voltage ( V\text {T} ) of ~0.6 V (at 1 mA/mm), a leakage current of 7.8 nA/mm (at −100 V), and a breakdown voltage of 704 V (at 1~\mu \textA /mm). The double-channel design also allows both the deep and shallow recesses to be terminated at GaN layers that results in high uniformity of V\text {T} . [ABSTRACT FROM PUBLISHER]

A low on-resistance normally-off GaN double-channel metal–oxide–semiconductor high-electron-mobility transistor (DC-MOS-HEMT) is proposed and demonstrated in this letter, which features a 1.5-nm AlN insertion layer (ISL) located 6 nm below the conventional barrier/GaN interface, forming a second channel at the interface between the AlN-ISL and the underlying GaN. With gate recess terminated at the upper channel, normally-off operation was obtained with V\mathrm {th} of +0.5 V at I\mathrm {DS}= 10 ~\mu \text{A} /mm or +1.4 V from the linear extrapolation of the transfer curve. The lower heterojunction channel is separated from the etched surface in the gate region, thereby maintaining its high field-effect mobility with a peak value of 1801 cm2/( \textV\cdot \texts ). The on-resistance is as small as 6.9 \Omega \cdot \text mm for a DC-MOS-HEMT with LG/L\mathrm {GS}/L\mathrm {GD} = 1.5/2/15~\mu \text{m} , and the maximum drain current is 836 mA/mm. A high breakdown voltage (>700 V) and a steep subthreshold swing of 72 mV/decade are also obtained. [ABSTRACT FROM AUTHOR]

In this paper, we systematically investigated the leakage and breakdown mechanisms of the low-pressure chemical vapor deposition (LPCVD) silicon nitride thin film deposited on AlGaN/GaN heterostructures. The LPCVD-SiNx gate dielectric exhibits low leakage and high breakdown electric field. The dominant mechanism of the leakage current through LPCVD-SiNx gate dielectric is identified to be Poole–Frenkel emission at low electric field and Fowler–Nordheim tunneling at high electric field. Both electric-field-accelerated and temperature-accelerated time-dependent dielectric breakdown of the LPCVD-SiNx gate dielectric were also investigated. [ABSTRACT FROM PUBLISHER]

In this letter, silicon nitride (SiNx) film deposited at 780 °C by low-pressure chemical vapor deposition (LPCVD) was employed as gate dielectric for GaN-based metal–insulator–semiconductor high-electron-mobility transistors. The LPCVD-SiNx exhibit improved gate dielectric performance than the plasma enhanced chemical vapor deposition-SiNx, including smaller forward and reverse gate leakage, and higher forward gate breakdown voltage. [ABSTRACT FROM AUTHOR]