Search

Solar filaments can undergo eruptions and result in the formation of coronal mass ejections (CMEs), which could significantly impact planetary space environments. Observations of eruptions involving polar crown filaments, situated in the polar regions of the Sun, are limited. In this study, we report a polar crown filament eruption (SOL2023-06-12), characterized by fast downflows below the filament. The downflows appear instantly after the onset of the filament eruption and persist for approximately 2 hours, exhibiting plane-of-sky (POS) velocities ranging between 92 and 144 km s$^{-1}$. They originate from the leading edge of the filament and no clear acceleration is observed. Intriguingly, these downflows appear at two distinct sites, symmetrically positioned at the opposite ends of the conjugate flare ribbons. Based on the observations, we propose that the filament might be supported by a magnetic flux rope (MFR), and these downflows possibly occur along the legs of the MFR. The downflows likely result from continuous reconnections between the MFR and the overlying magnetic field structures, and could either be reconnection outflows or redirected filament materials. We also observed horizontal drifting of the locations of downflows, which might correspond to the MFR's footpoint drifting. This type of downflows can potentially be utilized to track the footpoints of MFRs during eruptions.

Coronal rain (CR) is a crucial part of the mass cycle between the corona and chromosphere. It includes the flare-driven CR and two types of quiescent CR separately along the non-flaring active region closed loops and along the open structures, labeled as types I, II, and III CR, respectively. Among them, types I and III CR are generally associated with magnetic reconnection. In this study, employing data taken by the Solar Dynamics Observatory (SDO) and the Solar Upper Transition Region Imager (SUTRI) on 2022 October 11, we report three types of CR during an interchange reconnection between open and closed magnetic filed structures above the southeastern solar limb. The open and closed structures converge, with the formation of current sheet at the interface, and reconnect. The newly-formed closed and open structures then recede from the reconnection region. During the reconnection, coronal condensation occurs along the reconnecting closed loops, and falls toward the solar surface along both loop legs as the type II CR. Subsequently, condensation happens in the newly-formed closed loops, and moves down toward the solar surface along both loop legs as the type I CR. Magnetic dips of the reconnecting open structures form during the reconnection. In the dips, condensation occurs, and propagates along the open structures toward the solar surface as the type III CR. Our results suggest that the reconnection rate may be crucial for the formation of types I and III CR during the reconnection., Comment: 17 pages, 8 figures

Escape of active agents from metastable states is of great interest in statistical and biological physics. In this study, we investigate the escape of a flexible active ring, composed of active Brownian particles, from a flat attractive surface using Brownian dynamics simulations. To systematically explore the effects of activity, persistence time, and the shape of attractive potentials, we calculate escape time and effective temperature. We observe two distinct escape mechanisms: Kramers-like thermal activation at small persistence times and the maximal force problem at large persistence time, where escape time is determined by persistence time. The escape time explicitly depends on the shape of the potential barrier at high activity and large persistence time. Moreover, when the propulsion force is biased along the ring's contour, escape becomes more difficult and is primarily driven by thermal noise. Our findings highlight that, despite its intricate configuration, the active ring can be effectively modeled as a self-propelled Brownian particle when studying its escape from a smooth surface.

It has been supposed that the interplay of elasticity and activity plays a key role in triggering the non-equilibrium behaviors in biological systems. However, the experimental model system is missing to investigate the spatiotemporally dynamical phenomena. Here, a model system of an active chain, where active eccentric-disks are linked by a spring, is designed to study the interplay of activity, elasticity, and friction. Individual active chain exhibits longitudinal and transverse motion, however, it starts to self-rotate when pinning one end, and self-beats when clamping one end. Additionally, our eccentric-disk model can qualitatively reproduce such behaviors and explain the unusual self-rotation of the first disk around its geometric center. Further, the structure and dynamics of long chains were studied via simulations without steric interactions. It was found that hairpin conformation emerges in free motion, while in the constrained motions, the rotational and beating frequencies scale with the flexure number (the ratio of self-propelling force to bending rigidity), ~4/3. Scaling analysis suggests that it results from the balance between activity and energy dissipation. Our findings show that topological constraints play a vital role in non-equilibrium synergy behavior.

Wave-exciting is a universal phenomenon in physical and biological excitable systems. Here we show that colloidal systems of Quincke rollers which are driven periodically can condense into active liquids and active crystals, in which waves can be excited. In active liquids, the waves propagate antiparallel to local density gradients via the splitting of dense bands, and cross over each other in collision as sound waves do. The waves in active crystals have a sharp front like that of shock waves, and propagate parallel to local density gradients. The shock waves annihilate or converge as they collide. Detailed investigations on microscopic dynamics reveal that in sound waves, the dynamics of rollers is dominated by electrostatic repulsions; in shock waves, the dynamics is encoded with a density-dependent collective memory. These findings demonstrate a realization of excitable colloidal systems with tunable dynamics. This is of great interests in exploring the principles of self-organization and the fabrication of active functional materials., Comment: 11pages, 10figures

Amid the burgeoning development of generative models like diffusion models, the task of differentiating synthesized audio from its natural counterpart grows more daunting. Deepfake detection offers a viable solution to combat this challenge. Yet, this defensive measure unintentionally fuels the continued refinement of generative models. Watermarking emerges as a proactive and sustainable tactic, preemptively regulating the creation and dissemination of synthesized content. Thus, this paper, as a pioneer, proposes the generative robust audio watermarking method (Groot), presenting a paradigm for proactively supervising the synthesized audio and its source diffusion models. In this paradigm, the processes of watermark generation and audio synthesis occur simultaneously, facilitated by parameter-fixed diffusion models equipped with a dedicated encoder. The watermark embedded within the audio can subsequently be retrieved by a lightweight decoder. The experimental results highlight Groot's outstanding performance, particularly in terms of robustness, surpassing that of the leading state-of-the-art methods. Beyond its impressive resilience against individual post-processing attacks, Groot exhibits exceptional robustness when facing compound attacks, maintaining an average watermark extraction accuracy of around 95%., Comment: Accepted by ACM MM 2024

Context. In the coronal open-field regions, such as coronal holes, there are many transverse waves propagating along magnetic flux tubes, generally interpreted as kink waves. Previous studies have highlighted their potential in coronal heating, solar wind acceleration, and seismological diagnostics of various physical parameters. Aims. This study aims to investigate propagating kink waves, considering both vertical and horizontal density inhomogeneity, using three-dimensional magnetohydrodynamic (MHD) simulations. Methods. We establish a 3D MHD model of a gravitationally stratified open flux tube, incorporating a velocity driver at the lower boundary to excite propagating kink waves. Forward modelling is conducted to synthesise observational signatures of the Fe ix 17.1 nm line. Results. It is found that resonant absorption and density stratification both affect the wave amplitude. When diagnosing the relative density profile with velocity amplitude, resonant damping needs to be properly considered to avoid possible underestimation. In addition, unlike standing modes, propagating waves are believed to be Kelvin-Helmholtz stable. In the presence of vertical stratification, however, phase mixing of transverse motions around the tube boundary can still induce small scales, partially dissipating wave energy and leading to a temperature increase, especially at higher altitudes. Moreover, forward modeling is conducted to synthesise observational signatures, revealing the promising potential of future coronal imaging spectrometers such as MUSE in resolving these wave-induced signatures. Also, the synthesised intensity signals exhibit apparent periodic variations, offering a potential method to indirectly observe propagating kink waves with current EUV imagers., Comment: accepted for publication in A&A

Coronal mass ejections (CMEs) on stars can change the stars' magnetic field configurations and mass loss rates during the eruption and propagation and therefore, may affect the stars' rotation properties on long time-scales. The dynamics of stellar CMEs and their influence on the stellar angular momentum loss rate are not yet well understood. In order to start investigating these CME-related aspects on other stars, we conducted a series of magnetohydrodynamic simulations of CMEs on a solar-type star of moderate activity levels. The propagation and evolution of the CMEs were traced in the three-dimensional outputs and the temporal evolution of their dynamic properties (such as masses, velocities, and kinetic energies) were determined. The simulated stellar CMEs are more massive and energetic than their solar analog, which is a result of the stronger magnetic field on the surface of the simulated star than that of the Sun. The simulated CMEs display masses ranging from ~10^16 g to ~10^18 g and kinetic energies from ~10^31 erg to ~10^33 erg. We also investigated the instantaneous influence of the CMEs to the star's angular momentum loss rate. Our results suggest that angular momentum can either be added to or be removed from the star during the evolution of CME events. We found a positive correlation between the amplitude of the angular momentum loss rate variation and the CME's kinetic energy as well as mass, suggesting that more energetic/massive CMEs have higher possibility to add angular momentum to the star., Comment: 16 pages, 10 figures; accepted by ApJ

The solar eruption that occurred on 2023 November 28 (SOL2023-11-28) triggered an intense geomagnetic storm on Earth on 2023 December 1. The associated Earth's auroras manifested at the most southern latitudes in the northern hemisphere observed in the past two decades. In order to explore the profound geoeffectiveness of this event, we conducted a comprehensive analysis of its solar origin to offer potential factors contributing to its impact. Magnetic flux ropes (MFRs) are twisted magnetic structures recognized as significant contributors to coronal mass ejections (CMEs), thereby impacting space weather greatly. In this event, we identified multiple MFRs in the solar active region and observed distinct slipping processes of the three MFRs: MFR1, MFR2, and MFR3. All three MFRs exhibit slipping motions at a speed of 40--137 km s$^{-1}$, extending beyond their original locations. Notably, the slipping of MFR2 extends to $\sim$30 Mm and initiate the eruption of MFR3. Ultimately, MFR1's eruption results in an M3.4-class flare and a CME, while MFR2 and MFR3 collectively produce an M9.8-class flare and another halo CME. This study shows the slipping process in a multi-MFR system, showing how one MFR's slipping can trigger the eruption of another MFR. We propose that the CME--CME interactions caused by multiple MFR eruptions may contribute to the significant geoeffectiveness.

Filament eruptions often lead to coronal mass ejections (CMEs) on the Sun and are one of the most energetic eruptive phenomena in the atmospheres of other late-type stars. However, the detection of filament eruptions and CMEs on stars beyond the solar system is challenging. Here we present six filament eruption cases on the Sun and show that filament material obscuring part of the solar disk can cause detectable dimming signatures in sun-as-a-star flux curves of He II 304 A. Those filament eruptions have similar morphological features, originating from small filaments inside active regions and subsequently strongly expanding to obscure large areas of the solar disk or the bright flare regions. We have tracked the detailed evolution of six obscuration dimmings and estimated the dimming properties, such as dimming depths, dimming areas, and duration. The largest dimming depth among the six events under study is 6.2% accompanied by the largest dimming area of 5.6\% of the solar disk area. Other events have maximum dimming depths in a range of around 1% to 3% with maximum areas varying between about 3% to 4% of the solar disk area. The duration of the dimming spans from around 0.4 hours to 7.0 hours for the six events under study. A positive correlation was found between the dimming depth and area, which may help to set constraint on the filament sizes in stellar observations., Comment: 13 pages, 6 figures; accepted by ApJ

Current sheet is a common structure involved in solar eruptions. However, it is observed in minority of the events and the physical properties of its fine structures during a solar eruption are rarely investigated. Here, we report an on-disk observation that displays 108 compact, circular or elliptic bright structures, presumably plasma blobs, propagating bidirectionally along a flare current sheet during a period of $\sim$24 minutes. From extreme ultraviolet images, we have investigated the temporal variation of the blob number around the flare peak time. The current sheet connects the flare loops and the erupting filament. The width, duration, projected velocity, temperature, and density of these blobs are $\sim$1.7$\pm$0.5\,Mm, $\sim$79$\pm$57\,s, $\sim$191$\pm$81\,\kms, $\sim$10$^{6.4\pm0.1}$ K, and $\sim$10$^{10.1\pm0.3}$ cm$^{-3}$, respectively. The reconnection site rises with a velocity of $\leqslant$69\,\kms. The observational results suggest that plasmoid instability plays an important role in the energy release process of solar eruptions., Comment: Accepted by A&A, 9 pages, and 5 figures

Full-disk spectroscopic observations of the solar corona are highly desired to forecast solar eruptions and their impact on planets and to uncover the origin of solar wind. In this paper, we introduce a new multi-slit design (5 slits) to obtain extreme ultraviolet (EUV) spectra simultaneously. The selected spectrometer wavelength range (184-197 \r{A}) contains several bright EUV lines that can be used for spectral diagnostics. The multi-slit approach offers an unprecedented way to efficiently obtain the global spectral data but the ambiguity from different slits should be resolved. Using a numerical simulation of the global corona, we primarily concentrate on the optimization of the disambiguation process, with the objective of extracting decomposed spectral information of six primary lines. This subsequently facilitates a comprehensive series of plasma diagnostics, including density (Fe XII 195.12/186.89 \r{A}), Doppler velocity (Fe XII 193.51 \r{A}), line width (Fe XII 193.51 \r{A}) and temperature diagnostics (Fe VIII 185.21 \r{A}, Fe X 184.54 \r{A}, Fe XI 188.22 \r{A}, Fe XII 193.51 \r{A}). We find a good agreement between the forward modeling parameters and the inverted results at the initial eruption stage of a coronal mass ejection, indicating the robustness of the decomposition method and its immense potential for global monitoring of the solar corona., Comment: 14 pages, 5 figures, 2 tables. Accepted on 2024 April 18 for publication in ApJ. Published on 2024 May 30. The name of first author changed once from Linyi Chen (simplified Chinese) to Lami Chan (traditional Chinese) but for the same person

Band selection in hyperspectral imaging (HSI) is critical for optimising data processing and enhancing analytical accuracy. Traditional approaches have predominantly concentrated on analysing spectral and pixel characteristics within individual bands independently. These approaches overlook the potential benefits of integrating multiple data sources, such as Light Detection and Ranging (LiDAR), and is further challenged by the limited availability of labeled data in HSI processing, which represents a significant obstacle. To address these challenges, this paper introduces a novel unsupervised band selection framework that incorporates attention mechanisms and an Autoencoder for reconstruction-based band selection. Our methodology distinctively integrates HSI with LiDAR data through an attention score, using a convolutional Autoencoder to process the combined feature mask. This fusion effectively captures essential spatial and spectral features and reduces redundancy in hyperspectral datasets. A comprehensive comparative analysis of our innovative fused band selection approach is performed against existing unsupervised band selection and fusion models. We used data sets such as Houston 2013, Trento, and MUUFLE for our experiments. The results demonstrate that our method achieves superior classification accuracy and significantly outperforms existing models. This enhancement in HSI band selection, facilitated by the incorporation of LiDAR features, underscores the considerable advantages of integrating features from different sources., Comment: 13 pages, 13figures, 6 tables

The fusion of hyperspectral and LiDAR data has been an active research topic. Existing fusion methods have ignored the high-dimensionality and redundancy challenges in hyperspectral images, despite that band selection methods have been intensively studied for hyperspectral image (HSI) processing. This paper addresses this significant gap by introducing a cross-attention mechanism from the transformer architecture for the selection of HSI bands guided by LiDAR data. LiDAR provides high-resolution vertical structural information, which can be useful in distinguishing different types of land cover that may have similar spectral signatures but different structural profiles. In our approach, the LiDAR data are used as the "query" to search and identify the "key" from the HSI to choose the most pertinent bands for LiDAR. This method ensures that the selected HSI bands drastically reduce redundancy and computational requirements while working optimally with the LiDAR data. Extensive experiments have been undertaken on three paired HSI and LiDAR data sets: Houston 2013, Trento and MUUFL. The results highlight the superiority of the cross-attention mechanism, underlining the enhanced classification accuracy of the identified HSI bands when fused with the LiDAR features. The results also show that the use of fewer bands combined with LiDAR surpasses the performance of state-of-the-art fusion models., Comment: 15 pages, 13 figures

Classifying hyperspectral images is a difficult task in remote sensing, due to their complex high-dimensional data. To address this challenge, we propose HSIMamba, a novel framework that uses bidirectional reversed convolutional neural network pathways to extract spectral features more efficiently. Additionally, it incorporates a specialized block for spatial analysis. Our approach combines the operational efficiency of CNNs with the dynamic feature extraction capability of attention mechanisms found in Transformers. However, it avoids the associated high computational demands. HSIMamba is designed to process data bidirectionally, significantly enhancing the extraction of spectral features and integrating them with spatial information for comprehensive analysis. This approach improves classification accuracy beyond current benchmarks and addresses computational inefficiencies encountered with advanced models like Transformers. HSIMamba were tested against three widely recognized datasets Houston 2013, Indian Pines, and Pavia University and demonstrated exceptional performance, surpassing existing state-of-the-art models in HSI classification. This method highlights the methodological innovation of HSIMamba and its practical implications, which are particularly valuable in contexts where computational resources are limited. HSIMamba redefines the standards of efficiency and accuracy in HSI classification, thereby enhancing the capabilities of remote sensing applications. Hyperspectral imaging has become a crucial tool for environmental surveillance, agriculture, and other critical areas that require detailed analysis of the Earth surface. Please see our code in HSIMamba for more details., Comment: 11 pages, 2 figures, 8 tables

Surface reconstruction from point clouds is a crucial task in the fields of computer vision and computer graphics. SDF-based methods excel at reconstructing smooth meshes with minimal error and artefacts but struggle with representing open surfaces. On the other hand, UDF-based methods can effectively represent open surfaces but often introduce noise, leading to artefacts in the mesh. In this work, we propose a novel approach that directly predicts the intersection points between line segment of point pairs and implicit surfaces. To achieve it, we propose two modules named Relative Intersection Module and Sign Module respectively with the feature of point pair as input. To preserve the continuity of the surface, we also integrate symmetry into the two modules, which means the position of predicted intersection will not change even if the input order of the point pair changes. This method not only preserves the ability to represent open surfaces but also eliminates most artefacts on the mesh. Our approach demonstrates state-of-the-art performance on three datasets: ShapeNet, MGN, and ScanNet. The code will be made available upon acceptance.

Stellar coronal mass ejections (CMEs) from host stars are an important factor that affects the habitability of exoplanets. Although their solar counterparts have been well observed for decades, it is still very difficult to find solid evidence of stellar CMEs. Using the spectral line profile asymmetry caused by the Doppler shift of erupting plasma, several stellar CME candidates have been identified from spectral lines formed at chromospheric or transition region temperatures of the stars. However, a successful detection of stellar CME signals based on the profile asymmetries of coronal lines is still lacking. It is unclear whether we can detect such signals. Here we construct an analytical model for CMEs on solar-type stars, and derive an expression of stellar extreme-ultraviolet (EUV) line profiles during CME eruptions. For different instrumental parameters, exposure times, CME propagation directions and stellar activity levels, we synthesized the corresponding line profiles of Fe IX 171.07 \AA\ and Fe XV 284.16 \AA. Further investigations provide constraints on the instrumental requirements for successful detection and characterization of stellar CMEs. Our results show that it is possible to detect stellar CME signals and infer their velocities based on spectral profile asymmetries using an EUV spectrometer with a moderate spectral resolution and signal-to-noise ratio. Our work provides important references for the design of future EUV spectrometers for stellar CME detection and the development of observation strategies., Comment: 20 pages, 9 figures. Accepted for publication in ApJ

Fan-spine magnetic structure, as a fundamental three-dimensional topology in magnetic reconnection theory, plays a crucial role in producing solar jets. However, how fan-spine configurations form in the solar atmosphere remains elusive. Using the Chinese H$\alpha$ Solar Explorer (CHASE) and the Solar Dynamics Observatory (SDO), we present a case study on the complete buildup of fan-spine topology driven by flux emergence and the subsequent jet production. Two fan-spine structures and the two associated null points are present. Variations in null-point heights and locations were tracked over time during flux emergence. The north fan-spine structure is found to be created through magnetic reconnection between the newly emerged flux and the background field. Gentle reconnection persistently occurs after formation of the north fan-spine structure, resulting in weak plasma outflows. Subsequently, as flux emergence and magnetic helicity injection continue, the formation and eruption of mini-filaments after reconnection at the quasi-separatrix layer between the two nulls trigger three homologous jets. The CHASE observations reveal that the circular flare ribbon, inner bright patch, and remote brightening all exhibit redshifted signatures during these jet ejections. This work unveils the key role of flux emergence in the formation of fan-spine topology, and highlights the importance of mini-filaments for subsequent jet production., Comment: 20 pages, 7 figures accepted by the ApJL