Search

Spatially resolved fluid-flow modulation and its corresponding integration becomes a crucial aspect to consider when designing high-performing paper-based analytical devices. As such, high demand exists for cost-effective techniques able to selectively control flow in patternable regions of the device. In this regard, a solution composed of potassium alum and animal glue; sizing materials used in the fabrication of calligraphy Xuan paper, is successfully adapted for the first time in a revolutionary approach to efficiently modulate the capillary flow in paper microfluidic channels. Flow delays are achieved by coating the substrate systematically through the variation of parameters such as the ratio of alum to glue, the concentration of alum-glue in the solution, and the number of subsequent coating layers of alum-glue. Moreover, digitized patterning with alum-glue is developed to achieve programmable wicking profiles of accelerating, decelerating, and quasi-linear flow displacement by alternating coated and uncoated zones in the channel. Additionally, the influence of alum-glue when performing biometric assays is investigated by performing a horseradish peroxidase activity colorimetric assay and found to have negligible effects on reading, where a negligible difference of 5.2% was observed in an assay performed in a coated paper substrate, compared to an uncoated one.

The present research is focused on the development of a green and sustainable analytical method, based on the use of headspace solid-phase microextraction (HS SPME), and hydrogen as carrier gas, within the context of fast flow-modulation comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry (FM GC × GC-ToFMS), for the investigation of the volatile composition of Capsicum peppers. In such a respect, three different species were analysed: Annuum, Baccatum, and Chinense. Following HS SPME FM GC × GC-ToFMS analysis, a tile-based Fisher-ratio software was used to easily determine compounds that varied the most within the same variety of Capsicum samples. Particular emphasis was also devoted to the aroma profile of the thirty most sample-distinguishing compounds.

The present research is focused on the proposal of use of flow-modulation comprehensive two-dimensional enantio-gas chromatography (FM eGC × GC) as a valid, flexible, and possibly superior alternative to heart-cutting multidimensional enantio-GC (eMDGC). The latter, a technique of demonstrated utility, is used specifically for the targeted separation of chiral compounds, whereas FM eGC × GC can produce both targeted and high-resolution untargeted information in a single run. It is clearly possible to use eMDGC for untargeted analysis, often with a flame ionization detector (stand-by analysis), to monitor a first-dimension ( 1 D) separation, of much lower peak capacity compared to FM eGC × GC. If eMDGC is used with mass spectrometry (MS), it is normally exploited to monitor the second-dimension ( 2 D) separation. The analytical instrument consisted of automated solid-phase microextraction (SPME), and a low duty-cycle FM eGC × GC system (with time-of-flight MS), equipped with an enantioselective 1 D column (2,3-di-O-methyl-6-t-butyl silyl β-cyclodextrin derivative) and a 2 D polyethylene glycol one. Ten Marsala wines were subjected to analysis, for the determination of chiral lactones (many at the low ppb level, due to the high concentration capacity of SPME) and for general analyte profiling. In many instances, highly complex chromatograms were attained, with statistical analysis (ANOVA-simultaneous component analysis and partial least squares discriminant analysis) used for sample differentiation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Recent studies in neuroscience suggest that sniffing, namely sampling odors actively, plays an important role in olfactory system, especially in certain scenarios such as novel odorant detection. While the computational advantages of high frequency sampling have not been yet elucidated, here, in order to motivate further investigation in active sampling strategies, we share the data from an artificial olfactory system made of 16 MOX gas sensors under gas flow modulation. The data were acquired on a custom set up featured by an external mechanical ventilator that emulates the biological respiration cycle. 58 samples were recorded in response to a relatively broad set of 12 gas classes, defined from different binary mixtures of acetone and ethanol in air. The acquired time series show two dominant frequency bands: the low-frequency signal corresponds to a conventional response curve of a sensor in response to a gas pulse, and the high-frequency signal has a clear principal harmonic at the respiration frequency. The data are related to the study in [1], and the data analysis results reported there should be considered as a reference point. The data presented here have been deposited to the web site of The University of California at Irvine (UCI) Machine Learning Repository (https://archive.ics.uci.edu/ml/datasets/Gas+sensor+array+under+flow+modulation). The code repository for reproducible analysis applied to the data is hosted at the GutHub web site (https://github.com/variani/pulmon). The data and code can be used upon citation of [1].

The present research is focused on the preliminary evaluation, in particular in relation to the advisable operational conditions, of a novel low duty cycle flow modulator. In such a respect, a fast comprehensive two-dimensional gas chromatography-mass spectrometry method is herein proposed. Applications on a C 7 -C 30 series of alkanes, 64 fragrance allergens (plus 2 internal standards), and 5 perfumes, were carried out by using two different column sets, low-polarity + medium-polarity and low-polarity + low-polarity. In both cases, the first column was of dimensions 10 m × 0.25 mm ID × 0.25 µm d f , while the second one was of dimensions 1 m × 0.10 mm ID × 0.10 µm d f . A modulation period of 700 ms, with a re-injection period of 80 ms, was used in order to obtain a higher duty cycle (measured to be approx. 0.04). Absolute quantification of the allergens was carried out by using two internal standards, namely 1,4-dibromobenzene and 4,4'-dibromobiphenyl. In terms of limits of quantification the instrumental response was characterized by a wide variability, ranging between 9 ppb and 5.4 ppm for both column sets. A total number of 97 fragrance allergens were identified and quantified in five commercial perfumes., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Dynamic pressure gradient modulation (DPGM) is investigated for comprehensive two-dimensional gas chromatography (GC × GC) with time-of-flight mass spectrometry (TOFMS) detection. With DPGM, a commercial pneumatic "pulse" valve is opened to introduce a suitably high auxiliary gas pressure at a T-junction connecting the first dimension ( 1 D) and second dimension ( 2 D) columns during the modulation period (P M ), temporarily stopping the 1 D flow. The valve is then closed for the duration of a pulse width (p w ) to "re-inject" temporally focused 1 D eluate onto the 2 D column for separation. This flow modulation technique is observed to be compatible with TOFMS detection using a 2 D flow rate of 4 ml/min for the separation of a 90-component test mixture. A 25 min separation window using a P M  = 1 s and p w  = 200 ms for full modulation (and 100% duty cycle) provided an average 1 W b  = 4.5 s and 2 W b  = 130 ms for a 2D peak capacity of n c,2D  = 2700 (100 peaks per min). The detector response enhancement factor (DREF) serves as a metric for the enhanced sensitivity of the modulated relative to the unmodulated 1 D peaks, with DREFs ranging between 10 and 20 and about a 5-fold improvement in signal-to-noise ratio (S/N). The bilinear "quality" of the GC × GC data is studied using the chemometric method parallel factor analysis (PARAFAC). Since PARAFAC requires sufficiently trilinear data, the reproducibility of the 2 D peak shape for a given analyte is confirmed using lack-of-fit (LOF) and percent variation (R 2 ) metrics. The limit-of-detection (LOD) for the representative analyte hexadecane is determined using PARAFAC, providing an LOD of 0.7 ppb (±0.03 ppb) for three replicates. Seven heavily overlapped analytes are also fully resolved by PARAFAC down to the part-per-million (ppm) concentration level, producing reproducible spectra with a majority of spectral match values (MV) over 800 (RSD ≤ 7.1%). This study provides promising results for DPGM as a flow modulation technique compatible with GC × GC-TOFMS, providing high sensitivity data suitable for chemometric analysis., Competing Interests: Declaration of Competing Interest None., (Copyright © 2020. Published by Elsevier B.V.)

This preliminary research is focused on the task of defining an equivalent standard column set between cryogenic and flow-modulation comprehensive two-dimensional gas chromatography (GC × GC) combined with mass spectrometry (MS). Cryogenic modulation (CM) was carried out by using a loop-type device, while the flow modulator used was a seven-port wafer chip, equipped with an external accumulation loop. Initially, a common low-polarity + mid-polarity CM GC × GC column set was selected (30 m × 0.25 mm ID × 0.25 μm d f  + 1.5 m × 0.25 mm ID × 0.25 μm d f ), a method was developed, and a GC × GC-MS fingerprint was attained (on a sample of bio-oil derived from coconut fibers). After, a column set with the same stationary phases was selected for the flow modulation GC × GC-MS method (20 m × 0.18 mm ID × 0.18 μm d f  + 5 m × 0.32 mm ID × 0.25 μm d f ), with the capability to provide a-similar-as-possible separation. A side-by-side measurement of several chromatography parameters (efficiency, peak capacity, resolution, peak widths, retention factors, elution temperatures) was made., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Precision medicine has spurred new innovations in molecular pathology leading to recent advances in the analysis of exhaled breath as a non-invasive diagnostic tool. Volatile organic compounds (VOCs) detected in exhaled breath have the potential to reveal a wealth of chemical and metabolomic information. This study describes the development of a method for the analysis of breath, based on automated thermal desorption (TD) combined with flow modulated comprehensive two-dimensional gas chromatography (GC×GC) with dual flame ionisation and quadrupole mass spectrometric detection (FID and qMS). The constrained optimisation and analytical protocol was designed to meet the practical demands of a large-scale multi-site clinical study, while maintaining analytical rigour to produce high fidelity data. The results demonstrate a comprehensive method optimisation for the collection and analysis of breath VOCs by GC×GC, integral to the standardisation and integration of breath analysis within large clinical studies., (Copyright © 2019 The Authors. Published by Elsevier B.V. All rights reserved.)

Background: Continuous-flow ventricular assist devices (CF-VADs) produce non-physiologic flow with diminished pulsatility, which is a major risk factor for development of adverse events, including gastrointestinal (GI) bleeding and arteriovenous malformations (AVMs). Introduction of artificial pulsatility by modulating CF-VAD flow has been suggested as a potential solution. However, the levels of pulsatility and frequency of CF-VAD modulation necessary to prevent adverse events are currently unknown and need to be evaluated., Methods: The purpose of this study was to use human aortic endothelial cells (HAECs) cultured within an endothelial cell culture model (ECCM) to: (i) identify and validate biomarkers to determine the effects of pulsatility; and (ii) conclude whether introduction of artificial pulsatility using flow-modulation approaches can mitigate changes in endothelial cells seen with diminished pulsatile flow. Nuclear factor erythroid 2-related factor 2 (Nrf-2)-regulated anti-oxidant genes and proteins and the endothelial nitric oxide synthase/endothelin-1 (eNOS/ET-1) signaling pathway are known to be differentially regulated in response to changes in pulsatility., Results: Comparison of HAECs cultured within the ECCM (normal pulsatile vs CF-VAD) with aortic wall samples from patients (normal pulsatile [n = 5] vs CF-VADs [n = 5]) confirmed that both the Nrf-2-activated anti-oxidant response and eNOS/ET-1 signaling pathways were differentially regulated in response to diminished pulsatility. Evaluation of 2 specific CF-VAD flow-modulation protocols to introduce artificial pulsatility, synchronous (SYN, 80 cycles/min, pulse pressure 20 mm Hg) and asynchronous (ASYN, 40 cycles/min, pulse pressure 45 mm Hg), suggested that both increased expression of Nrf-2-regulated anti-oxidant genes and proteins along with changes in levels of eNOS and ET-1 can potentially be minimized with ASYN and, to a lesser extent, with SYN., Conclusions: HAECs cultured within the ECCM can be used as an accurate model of large vessels in patients to identify biomarkers and select appropriate flow-modulation protocols. Pressure amplitude may have a greater effect in normalizing anti-oxidant response compared with frequency of modulation., (Copyright © 2018 International Society for Heart and Lung Transplantation. Published by Elsevier Inc. All rights reserved.)

The present research is focused on the use of a triple quadrupole mass spectrometer (QqQ MS) coupled with flow modulated comprehensive two-dimensional gas chromatography (FM GC × GC) for a multilevel elucidation of biodegradation potentiality of natural marine microbial populations during a bioremediation (biostimulation) treatment. The crude oil used for the evaluation of the bioremediation process, namely Dansk Blend Pier E1, represents a very complex sample. Hence, in order to understand the metabolic activity of microbial populations during the bioremediation process, a GC × GC system was used. The high separation power has allowed a detailed characterization of the different chemical families; moreover, thanks to the high acquisition frequency of the QqQ MS spectrometer, both full scan and multiple reaction monitoring (MRM) data were acquired in the same run. By using this system, both qualitative analysis of untargeted hydrocarbons mixture (crude oil) and qualitative analysis of biomarker compounds, present in low amount and often hindered under the bulk of the sample (i.e. adamantanes, diamantanes, steranes and hopanes), were performed simultaneously. The bioremediation capability of biostimulated bacteria was evaluated at four (T 4 ), eight (T 8 ) and fourteen (T 14 ) days. Progressive degradation of linear, branched, and aromatic hydrocarbons, adamantanes, and diamantanes has been showed, whereas, results underline the lack of any kind of activity against steranes, and hopanes., (Copyright © 2018 Elsevier B.V. All rights reserved.)

A fluidic device called the multi-mode modulator (MMM) has been developed for use as a comprehensive two-dimensional gas chromatography (GC x GC) modulator. The MMM can be employed in a wide range of capacities including as a traditional heart-cutting device, a low duty cycle GC x GC modulator, and a full transfer GC x GC modulator. The MMM is capable of producing narrow component pulses (widths <50ms) while operating at flows compatible with high resolution chromatography. The sample path of modulated components is confined to the interior of a joining capillary. The joining capillary dimensions and the position of the columns within the joining capillary can be optimized for the selected modulation mode. Furthermore, the joining capillary can be replaced easily and inexpensively if it becomes fouled due to sample matrix components or column bleed. The principles of operation of the MMM are described and its efficacy is demonstrated as a heart-cutting device and as a GC x GC modulator., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The present paper is focused on the use of a vacuum ultraviolet absorption spectrometer (VUV) for gas chromatography (GC), within the context of flow modulated comprehensive two-dimensional gas chromatography (FM GC×GC). The features of the VUV detector were evaluated through the analysis of petrochemical and fatty acids samples. Besides responding in a predictable fashion via Beer's law principles, the detector provides additional spectroscopic information for qualitative analysis. Virtually all chemical species absorb and have unique gas phase absorption features in the 120-240nm wavelength range monitored. The VUV detector can acquire up to 90 full range absorption spectra per second, allowing its coupling with comprehensive two-dimensional gas chromatography. This recent form of detection can address specific limitations related to mass spectrometry (e.g., identification of isobaric and isomeric species with very similar mass spectra or labile chemical compounds), and it is also able to deconvolute co-eluting peaks. Moreover, it is possible to exploit a pseudo-absolute quantitation of analytes based on pre-recorded absorption cross-sections for target analytes, without the need for traditional calibration. Using this and the other features of the detector, particular attention was devoted to the suitability of the FM GC×GC-VUV system toward qualitative and quantitative analysis of bio-diesel fuel and different kinds of fatty acids. Satisfactory results were obtained in terms of tailing factor (1.1), asymmetry factor (1.1), and similarity (average value 97%), for the FAMEs mixtures analysis., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The present research is based on the development of an effective, environmentally-friendly and low-cost method for investigation of minor components in vegetable oils, exploiting the advantages of a miniaturized solid-phase extraction (SPE) and the potential of flow modulation (FM) comprehensive two-dimensional gas chromatography (GC×GC), coupled to a mass spectrometer (MS) and a flame ionization detector (FID). The initial sample preparation step was carried out using a miniaturized approach characterized by a SPE process in a Pasteur pipette. Then, the isolated fraction was injected into an FM GC×GC system. Tentative identification was carried out by means of MS spectral information, while quantification was carried out by using the FID data. Four different vegetable oil samples were analyzed using the proposed method, namely an extra virgin olive oil (EVO), a hazelnut oil (HO), a borage oil, and an EVO/HO mixture., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The performances of forward flow fill and flush (FFF) and of reverse flow fill and flush (RFF) in flow modulated comprehensive two-dimensional gas chromatography (GC×GC) using the same volume of the sampling channel have been studied and compared. Sample models include a reference mixture of hydrocarbons at low concentration, a petroleum reformate product and the essential oil of Rosa damascena Miller. The latter samples contain solutes in different concentrations but some up to 30% allowing to study overloading phenomena in detail. For solutes injected at low quantity, the performance of FFF and RFF is similar. For solutes present in a sample at high quantity, RFF guarantees less broadening and spreading resulting in better quantitation., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The main objective of the herein described research was focused on performing satisfactory flow modulation (FM), in comprehensive two-dimensional gas chromatography-mass spectrometry (GC×GC-MS), using an MS-compatible second-dimension gas flow of approx. 4 mL min(-1). The FM model used was based on that initially proposed by Seeley et al. [3]. The use of limited gas flows was enabled through fine tuning of the FM parameters, in particular the duration of the re-injection (or flushing) process. Specifically, the application of a long re-injection period (i.e., 700 ms) enabled efficient accumulation-loop flushing with gas flows of about 4 mL min(-1). It was possible to apply such extended re-injection periods by using different restrictor lengths in the connections linking the modulator to the auxiliary pressure source. FM GC×GC-MS applications were performed on a mixture containing C9-10 alkanes, and on a sample of essential oil. GC×GC-MS sensitivity was compared with that attained by using conventional GC-MS analysis, in essential oil applications. It was observed that signal intensities were, in general, considerably higher in the FM GC×GC-MS experiments., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The present research is based on the development and use of a flow-modulation (FM) comprehensive two-dimensional gas chromatography-quadrupole mass spectrometry (GC×GC-qMS) method for the determination of recently-highlighted (by the Scientific Committee on Consumer Safety) fragrance allergens (54) in cosmetics. FM GC×GC-qMS conditions were finely tuned to generate flow conditions (≈7 mL min(-1)) compatible with the qMS system used. Six-point calibration curves, over the range 1, 5, 10, 20, 50, 100 mg L(-1), were constructed for the 54 target allergens, with satisfactory linearity observed in all cases. Absolute quantification was performed by using extracted ions; target analyte identification was performed through measurement of ion ratios (qualifier/quantifier), full-scan MS database matching and the use of linear retention indices. Additional analytical figures of merit subjected to measurement were intra-day repeatability, accuracy at the 25 and 5 mg L(-1) levels, and limits of detection and quantification. The number of data points per peak, along with mass spectral skewing, was also subjected to evaluation. Finally, the FM GC×GC-qMS method was used not only for the quantification of target allergens in five commercial perfumes, but also for general qualitative profiling., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Comprehensive two-dimensional gas chromatography (GC×GC) modulators normally transfer primary column effluent to the head of the secondary column as a series of sharp pulses. Such pulses are produced with time-varying temperature gradients in thermal modulation or with time-varying flow patterns in flow modulation. Thermal modulators produce narrow peaks at optimal flow rates, but require large amounts of consumables or a highly engineered heating/cooling system. Flow modulators involve simpler hardware and no additional consumables. However, flow modulators require a large increase in secondary column flow or transfer only a small portion of the primary effluent to the secondary column. This study examines a new method of producing GC×GC separations with a flow modulator. Instead of injecting narrow pulses, the modulator transfers primary effluent to the secondary column in the form of an intricate injection pattern. The detector signal is deconvoluted and converted to a two-dimensional chromatogram. The high duty cycle of the technique (>50%) leads to deconvoluted peaks with twenty times greater intensity than those produced by conventional modulation with a Deans switch modulator. Pattern modulation can be produced without requiring elevated carrier flows. This study evaluates the efficacy of pattern modulation GC×GC by analyzing a standard mixture of 43 oxygenated organic compounds and an E85 fuel sample., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The present research is focused on the use and evaluation of a novel helium ionization detector, defined as barrier discharge ionization detector (BID), within the context of (low-)flow modulation comprehensive two-dimensional gas chromatography (FM GC×GC). The performance of the BID device was compared to that of a flame ionization detector (FID), under similar FM GC×GC conditions. Following development and optimization of the FM GC×GC method, the BID was subjected to fine tuning in relation to acquisition frequency and discharge flow. Moreover, the BID performance was measured and compared to that of the FID, in terms of extra-column band broadening, sensitivity and dynamic range. The comparative study was carried out by using standard compounds belonging to different chemical classes, along with a sample of diesel fuel. Advantages and disadvantages of the BID system, also within the context of FM GC×GC, are critically discussed. In general, the BID system was characterized by a more limited dynamic range and increased sensitivity, compared to the FID. Additionally, BID and FID contribution to band broadening was found to be similar under the operational conditions applied. Particular attention was devoted to the behaviour of the FM GC×GC-BID system toward saturated and aromatic hydrocarbons, for a possible future use in the field of mineral-oil food contamination research., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The present research is focused on the development of a flow-modulated comprehensive two-dimensional gas chromatography-triple quadrupole mass spectrometry (FM GC × GC-MS/MS) method for the determination of classes of aromatic organic sulphur compounds (benzothiophenes, dibenzothiophenes, and benzonaphthothiophene) in heavy gas oil (HGO). The MS/MS instrument was used to provide both full-scan and multiple-reaction-monitoring (MRM) data. Linear retention index (LRI) ranges were used to define the MRM windows for each chemical class. Calibration solutions (internal standard: 1-fluoronaphthalene) were prepared by using an HGO sample, depleted of S compounds. Calibration information was also derived for the thiophene class (along with MRM and LRI data), even though such constituents were not present in the HGO. Linearity was satisfactory over the analyzed concentration range (1-100 mg/L); intra-day precision for the lowest calibration point was always below 17%. Accuracy was also satisfactory, with a maximum percentage error of 3.5% (absolute value) found among the S classes subjected to (semi-)quantification. The highest limit of quantification was calculated to be 299 μg/L (for the C1-benzothiophene class), while the lowest was 21 μg/L (for the C4-benzothiophene class)., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The present paper contains research data relative to an approach herein defined as flow-modulation (FM) low-pressure comprehensive two-dimensional gas chromatography, abbreviated as "GC×LP GC". The abbreviation LP is positioned before the second GC abbreviation because LP conditions were generated across a mega-bore second-dimension column (10m×0.53mm ID), it being connected to a quadrupole mass spectrometer (qMS). Flow modulation was performed with MS-compatible gas flows (7-8mL/min), following recent research work [7]; using such an approach, the main disadvantage of flow modulation, specifically the generation of excessively high second-dimension flows, is avoided. A further noteworthy aspect of the investigation was the use of a long accumulation loop (e.g., 51cm), a modification that greatly improved the general post-modulation peak shape quality. FM GC×LP GC-qMS applications on pure standard compounds, as well as on milk and fish oil fatty acid methyl esters, are shown and discussed., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The present research is specifically based on the use of greatly-reduced gas flows, in flow-modulator (FM) comprehensive two-dimensional gas chromatography systems. In particular, focus of the present research is directed to FM devices characterized by an accumulation stage, and a much briefer re-injection step. It has been widely accepted that the operation of such FM systems requires high gas flows (≥20mL/min), to re-inject the gas-phase contents of sample (or accumulation) loops, onto the second column. On the contrary, it will be herein demonstrated that much lower gas flows (≈ 6-8mL/min) can efficiently perform the modulation step of re-injection. The possibility of using such improved operational conditions is given simply by a fine optimization of the processes of accumulation and re-injection. The application of lower gas flows not only means that second-dimension separations are carried out under better analytical conditions, but, even more importantly, greatly reduces problems which arise when using mass spectrometry (i.e., sensitivity and instrumental pumping capacity)., (Copyright © 2014 Elsevier B.V. All rights reserved.)