Search

Metal-metal bonded complexes are promising candidates for catalyzing redox transformations. Of particular interest is the oxidation of ammonia to dinitrogen, an important half reaction for the potential utilization of ammonia as a fuel or hydrogen carrier. This work computationally explores 30 different metal-metal bonded dimers (5 different metal centers and 6 different benzoate ligand derivatives) to explore the tunability of the redox potential when ammonia is bound to the complexes as an axial ligand, modeling the first step in ammonia oxidation electrocatalysis. We calculate the redox potentials of these compounds, making reference to experimental data when appropriate, identifying two degrees of tunability: a coarse adjustment, changing the metal center, allows for a wide range of redox potentials to be accessed (from +1.0 to -2.0 V vs. ferrocene/ferrocenium in acetonitrile solution) and a fine adjustment, the para -substituent of the benzoate derivative, which affects the redox potential in a smaller range based on the electron donating/withdrawing effects of the substituent. Ruthenium and osmium tetrabenzoate catalysts are prime candidates for next generation ammonia oxidation catalysts because their redox potentials fall within the direct ammonia fuel cell "viability zone" bracketed by the thermodynamic potentials of oxygen reduction (ORR) and nitrogen reduction (NRR). Rhodium tetrabenzoate species fall above the ORR potential, suggesting ammonia oxidation promoted by Rh 2 catalysts could instead be used to facilitate hydrogen production through coupling to hydrogen evolution at a cathode. The redox potentials of rhenium and iridium tetrabenzoate catalysts fall below the NRR potential suggesting that these compounds could be further investigated in the context of electrochemical ammonia synthesis. Each redox event studied involves electron transfer from the M-M δ* orbital regardless of choice of metal or benzoate ligand derivative; this leads us to believe that the chemical reactivity of the various studied compounds will be similar in the context of ammonia oxidation.

Iron-based extended metal atom chains (EMACs) are potentially high-spin molecules with axial magnetic anisotropy and thus candidate single-molecule magnets (SMMs). We herein compare the tetrairon(ii), halide-capped complexes [Fe4(tpda)3Cl2] (1Cl) and [Fe4(tpda)3Br2] (1Br), obtained by reacting iron(ii) dihalides with [Fe2(Mes)4] and N2,N6-di(pyridin-2-yl)pyridine-2,6-diamine (H2tpda) in toluene, under strictly anhydrous and anaerobic conditions (HMes = mesitylene). Detailed structural, electrochemical and Mössbauer data are presented along with direct-current (DC) and alternating-current (AC) magnetic characterizations. DC measurements revealed similar static magnetic properties for the two derivatives, with χMT at room temperature above that for independent spin carriers, but much lower at low temperature. The electronic structure of the iron(ii) ions in each derivative was explored by ab initio (CASSCF-NEVPT2-SO) calculations, which showed that the main magnetic axis of all metals is directed close to the axis of the chain. The outer metals, Fe1 and Fe4, have an easy-axis magnetic anisotropy (D = -11 to -19 cm-1, |E/D| = 0.05-0.18), while the internal metals, Fe2 and Fe3, possess weaker hard-axis anisotropy (D = 8-10 cm-1, |E/D| = 0.06-0.21). These single-ion parameters were held constant in the fitting of DC magnetic data, which revealed ferromagnetic Fe1-Fe2 and Fe3-Fe4 interactions and antiferromagnetic Fe2-Fe3 coupling. The competition between super-exchange interactions and the large, noncollinear anisotropies at metal sites results in a weakly magnetic non-Kramers doublet ground state. This explains the SMM behavior displayed by both derivatives in the AC susceptibility data, with slow magnetic relaxation in 1Br being observable even in zero static field.

The metastable purple [(Py5Me2)RuIII(N3)]2+ ion reacts with PPh3 at room temperature to form the phosphinimine complex [(Py5Me2)RuII(N(H)PPh3)]2+ and free [H2NPPh3]+ in a combined 23% conversion. Mechanistic studies suggest that this is the first metallo-Staudinger reaction of a late transition metal that bypasses the nitrido mechanism and instead utilizes a Ru-N[double bond, length as m-dash]N[double bond, length as m-dash]N-PPh3 phosphazide intermediate.

The coordination chemistry of Co(ii) with the chelating dicarboxylate ligand esp (esp = α,α,α',α'-tetramethyl-1,3-benzenedipropionate) is explored. We report here the bimetallic paddlewheel-type dimer, Co2(esp)2(EtOH)2 (1), and a bowl-shaped, heptanuclear coordination cluster, Co7(OH)4(Hesp)2(esp)4(MeCN)2·4MeCN (2). Crystal structures of both complexes are reported as well as their magnetic properties, which indicate antiferromagnetic interactions among the Co(ii) ions.

A series of Ru II complexes stabilized with the pentapyridyl ligand Py 5 Me 2 (Py 5 Me 2 = 2,6-bis(1,1-bis(2-pyridyl)ethyl)pyridine) and with an axial X ligand (X = Cl - , H 2 O, N 3 - , MeCN) were prepared and characterized in the solid state and in non-aqueous solution. The cyclic voltammograms of these complexes in MeCN reflect a reversible substitution of the axial X ligand with MeCN. Irreversible ligand substitution of [(Py 5 Me 2 )RuN 3 ] + is also observed in propylene carbonate, but only at oxidizing potentials that decompose the azide ligand. The monometallic chloride and azide species are compared with analogous Ru 2 metal-metal bonded complexes, which have been reported to undergo irreversible chloride dissociation upon reduction.

Five new metal-metal bonded Ru 2 compounds are presented and discussed: Ru 2 (ap) 4 ONO 2 (2), [Ru 2 (ap) 4 NCMe][BF 4 ] (3), Ru 2 (ap) 4 FBF 3 (4), Ru 2 (ap) 4 OTf (5), and [Ru 2 (ap) 4 OTf][Ag(OTf) 2 ] (6) (ap = 2-anilinopyridinate). All compounds have a (4,0) arrangement of the ap ligands about the Ru-Ru bond and contain one sterically blocked axial site and one site containing a labile ligand. These compounds display some of the shortest Ru-Ru distances known for this class of compounds. We demonstrate a reversible interconversion between compounds 3 and 4 as the MeCN and BF 4 - ligands are readily displaced. Despite the presence of labile axial ligands, compounds 2-5 remain high spin with an S = 3/2 ground state as determined by EPR spectroscopy.

We present the synthesis, structure, and electrochemistry of K 3 [Mo 2 (SNO5) 4 Cl] 3 [Mo 2 (SNO5) 4 ] (1, HSNO5 = monothiosuccinimide), the first example of a heterometallic extended metal atom node (HEMAN). The HEMAN consists of two perpendicular, intersecting lines of metal atoms formed by three [Mo 2 (SNO5) 4 Cl] - units and one [Mo 2 (SNO5) 4 ] unit tethered together by K + ions.

The complex {[Ru2(ap)4]2[AgF2]}[BF4]3 ({2}[BF4]3, ap = 2-anilinopyridine), containing the [AgF2](-) anion ligated to two [Ru2](6+) cores, is prepared, characterized, and compared to dimeric dumbbell-type structures, monomeric Ru2 structures, as well as the known set of dihalo coinage-metalate anions. X-ray crystallography indicates that the Ru-Ru and Ru-F distances are rather short, 2.2835(3) Å and 2.054(1) Å, respectively, while the Ag-F distance of 2.274(1) Å is longer than that calculated for the free/un-ligated anion. Cyclic voltammetry in dichloromethane indicates that, while some of {2}(3+) breaks apart into an [Ru2(ap)4F](+) ([3](+)) monomer in solution, the remaining dimer has a single reversible two-electron redox feature for the Ru2(6/5+) couple that is at a lower potential than that of [3](+). This is one of the few examples of a ligated dihalo coinage-metalate, and it is the first example of a coinage metal difluoride anion, either free or ligated.

Five novel homoleptic heterobimetallic bismuth(II)-rhodium(II) carboxylate complexes--BiRh(TPA)4 (1), BiRh(but)4 (2), BiRh(piv)4 (3), BiRh(esp)2 (4), and BiRh(OAc)4 (5)--were synthesized in good yields by equatorial ligand substitution starting from BiRh(TFA)4 (TPA = triphenylacetate, but = butyrate, piv = pivalate, esp = α,α,α',α'-tetramethyl-1,3-benzenedipropionate, OAc = acetate, and TFA = trifluoroacetate). We report here (1)H and (13)C{(1)H} NMR spectra and cyclic voltammograms for complexes , and IR spectra for all complexes. Irreversible redox waves appear between -1.4 to -1.5 V for [BiRh](3+/4+) couples and 1.3 to 1.5 V vs. Fc/Fc(+) for [BiRh](4+/5+) couples for complexes indicating a wide range of stability for the compounds. The X-ray crystal structure of reveals a Bi-Rh distance of 2.53 Å.

The location of the unpaired electron in the new mixed-valent (W2)(IV,V) trication [W2O(dpa)4](3+) presents a challenge for DFT methods. EPR spectroscopy confirms the unpaired electron to be in the W(V)-oxo unit, in agreement with the predictions of hybrid functionals B3LYP and TPSSh, but contrary to the predictions of non-hybrid functionals.

We report an exploration of the coordination chemistry of a systematic series of cyclic thioamidate ligands with the quadruply-bonded Mo2(4+) core. In addition to the S and N donor atoms that bind to Mo, the ligands utilized in this study have an additional O or S atom in conjugation with the thioamidate π system. The preparation of four new Mo2 complexes is described, and these compounds are characterized by X-ray crystallography, NMR and UV-vis spectroscopy, electrochemistry, and DFT calculations. These complexes provide a means to interrogate the electronics of Mo2(thioamidate)4 systems. Notably, we describe the first two examples of Mo2(thioamidate)4 complexes in their cis-2,2-regioisomer. By varying the π-system substituent and regioisomerism of these compounds, the electronics of the dimolybdenum core is shown to be altered with varying degrees of effect. Cyclic voltammetry results show that changing the π-system substituent from O to S results in an increase in the Mo2(4+/5+) oxidation potential by 170 mV. Changing the arrangement of ligands around the dimolybdenum core from trans-2,2 to cis-2,2 slightly weakens the metal-ligand bonds, raising the oxidation potential by a more modest 30-100 mV. MO diagrams of each compound derived from DFT calculations support these conclusions as well; the identity of the π-system substituent alters the δ-δ* (HOMO-LUMO) gap by up to 0.4 eV, whereas regioisomerism yields smaller changes in the electronic structure.

A new mixed-valent Rh(2)(II,III) dimer, [Rh(2)(espn)(2)Cl] (espn(2-) = α,α,α',α'-tetramethyl-1,3-benzenedipropanamidate), is reported. This compound readily dissociates Cl(-) at low concentrations in solution to form the active [Rh(2)(espn)(2)](+) catalyst, which performs intramolecular C-H amination with TONs > 1400. This work expands the scope of Rh(2)(II,III) dimers to nitrenoid chemistry.

We report here two novel synthetic pathways toward the preparation of a family of trimetallic diazide compounds of the type Cr(2)M(dpa)(4)(N(3))(2), with M = Cr (10), Mn (4), Fe (5), and Co (11). Reaction of either Cr(2)M(dpa)(4)(OTf)(2) (for M = Mn and Fe) or [Cr(2)M(dpa)(4)(MeCN)(2)](PF(6))(2) (for M = Cr and Co) with sodium azide in methanol leads to the formation of the corresponding diazide compounds, and single crystal X-ray diffraction measurements confirm the predicted structures. Compounds 4, 5, and 10 are all high-spin compounds, but 11 is a spin-crossover compound exhibiting low-spin behavior at low temperatures (~100 K). Thermolytic characterization by DSC and TGA reveals an exothermic reaction corresponding to the loss of two dinitrogen molecules from compounds 5, 10, and 11. Further characterization by solution NMR measurements and cyclic voltammetry are also presented.

Three-center/four-electron (3c/4e) bonds are important bonding motifs that dictate the electronic structure, and thereby the reactivity, of metal-metal bonded carbene and nitrene intermediate complexes that are crucial to the dirhodium-catalyzed functionalization of hydrocarbons. In this Perspective article, general features of the 3c/4e bond are presented and discussed in comparison to two-center/two-electron (2c/2e) bonds. Specifically, 3c/4e bonding interactions lead to longer distances between the atoms involved and measurably weaker bonds. Additionally, excited states derived from the 3c/4e bonding manifold are lower in energy than those derived from a 2c/2e manifold, signifying a greater degree of reactivity in the former case. Three coterminous 3c/4e Ru-Ru-N bonds are present in metal-metal/metal-ligand multiply bonded diruthenium terminal nitrido compounds. This bonding situation results in an unusual superelectrophilic character of the nitride nitrogen atom, exemplified by its insertion into aryl C-H bonds via an electrophilic aromatic substitution mechanism. The key catalytic intermediates in dirhodium-catalyzed C-H functionalization reactions, dirhodium carbene and dirhodium nitrene complexes, may also be described as superelectrophilic by virtue of 3c/4e Rh-Rh-C(or N) σ and π bonds. These 3c/4e bonding interactions set apart dirhodium carbene and nitrene intermediates from other, less electrophilic, carbene or nitrene species.

Addition of CrCl(2) to the dinuclear synthon MoW(dpa)(4) yields a regioselectively formed heterotrimetallic Mo[quadruple bond]W...Cr chain; computational studies suggest that the polarization of the Mo[quadruple bond]W quadruple bond partially accounts for this unexpected selectivity.

Recent advances in synthetic chemistry have led to the discovery of "superoxidized" iron centers with valencies Fe(v) and Fe(vi) [K. Meyer et al., J. Am. Chem. Soc., 1999, 121, 4859-4876; J. F. Berry et al., Science, 2006, 312, 1937-1941; F. T. de Oliveira et al., Science, 2007, 315, 835-838.]. Furthermore, in recent years a number of high-valent Fe(iv) species have been found as reaction intermediates in metalloenzymes and have also been characterized in model systems [C. Krebs et al., Acc. Chem. Res., 2007, 40, 484-492; L. Que, Jr, Acc. Chem. Res., 2007, 40, 493-500.]. These species are almost invariably stabilized by a highly basic ligand X(n-) which is either O(2-) or N(3-). The differences in structure and bonding between oxo- and nitrido species as a function of oxidation state and their consequences on the observable spectroscopic properties have never been carefully assessed. Hence, fundamental differences between high-valent iron complexes having either Fe=O or Fe=N multiple bonds have been probed computationally in this work in a series of hypothetical trans-[FeO(NH(3))(4)OH](+/2+/3+) (1-3) and trans-[FeN(NH(3))(4)OH](0/+/2+) (4-6) complexes. All computational properties are permeated by the intrinsically more covalent character of the Fe=N multiple bond as compared to the Fe=O bond. This difference is likely due to differences in Z* between N and O that allow for better orbital overlap to occur in the case of the Fe=N multiple bond. Spin-state energetics were addressed using elaborate multireference ab initio computations that show that all species 1-6 have an intrinsic preference for the low-spin state, except in the case of 1 in which S=1 and S=2 states are very close in energy. In addition to Mössbauer parameters, g-tensors, zero-field splitting and iron hyperfine couplings, X-ray absorption Fe K pre-edge spectra have been simulated using time-dependent DFT methods for the first time for a series of compounds spanning the high-valent states +4, +5, and +6 for iron. A remarkably good correlation of these simulated pre-edge features with experimental data on isolated high-valent intermediates has been found, allowing us to assign the main pre-edge features to excitations into the empty Fe d(z(2)) orbital, which is able to mix with Fe 4p(z), allowing an efficient mechanism for the intensification of pre-edge features.

The coordination chemistry of CrCl3 with three pentadentate ligands having the [1,4,7]-triazacyclononane-1,4-diacetato motif have been investigated. The new resulting six-coordinate Cr(iii)-chloro species react cleanly with sodium azide to form the corresponding azido species, which undergo photolysis under irradiation at 419 nm in acetonitrile-water solution to form Cr(v)-nitrido species that are partially hydrolyzed to their corresponding Cr(III)-hydroxo counterparts. Five of these Cr complexes have been characterized by X-ray crystallography. The hydroxo and nitrido species co-crystallize complicating crystal structural refinement. What at first appeared to be the longest Cr[triple bond, length as m-dash]N triple bond distance yet observed (1.66 A) was found after re-refinement to be an artifact of positional disorder of the Cr atoms of 73% nitrido and 27% hydroxo species. The re-refined Cr[triple bond, length as m-dash]N bond distance is estimated as 1.58 A, which agrees well with the observed Cr[triple bond, length as m-dash]N stretching frequency of 971 cm-1 found by IR spectroscopy. UV-vis data for the "nitrido" complexes suggest that they are all three partially hydrolyzed. These results emphasize the care that must be taken in the characterization of compounds that may co-crystallize with structurally similar analogs.

We report a dirhodium paddlewheel compound which has an Rh2(5+) core enveloped by four guanidinate ligands and an axially coordinated bromine atom; Rh2(hpp)4Br crystallizes as a 1-D chain with a Rh-Rh distance of 2.430(3) è and a Rh-Rh bond order of 1.5 (hpp = the anion of 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2a]pyrimidine).

Reaction of activated palladium metal with a HNO3/acetic acid mixture produces both orange Pd3(OAc)6, 1, and purple Pd3(OAc)5(NO2), 2. Compound has a trinuclear structure derived from that of the well-known triangular complex 1 in which one acetate group has been replaced by a nitrite group which is bonded to one palladium atom by the nitrogen atom and to another Pd atom using one of the oxygen atoms. Highly pure 1 can be made by continuous removal of the nitric oxides from the reaction mixture using a flow of N2. 1H NMR spectra of solutions of 1 in CDCl3 and C6D6 show several signals of various intensities when a small amount of water is present in the deuterated solvents but only one signal when the solvents are thoroughly dried. These results are consistent with the occurrence of one or more hydrolysis processes when the solvents contain water and suggest that hypotheses about various [Pd(OAc)2]n aggregates that have previously been brought forward in the literature to explain the complexity of the spectrum of 1 are unnecessary, especially for nonpolar solvents. Compound 2 does not hydrolyze, and in wet or dried solvents shows a 1H NMR spectrum that consists of five equal-intensity signals due to the five nonequivalent acetate groups.

Structural studies of pentachromium and pentacobalt extended metal atom chain (EMAC) systems are presented in which the metal chains are helically wrapped by either the pentadentate dianion tripyridyldiamide (tpda) or its diethyl-substituted analogue bis(4-ethyl-2-pyridylamido)pyridine (etpda). The compound Cr(5)(tpda)(4)(NCS)(2), has alternating long and short Cr-Cr distances, contrary to recent reports that describe it as symmetrical with essentially equally spaced chromium atoms. The linear Cr(5)(10+) chain is composed of two Cr(2)(4+) quadruply bonded units and an isolated high spin Cr(II) unit. The new compounds Cr(5)(etpda)(4)Cl(2), [Cr(5)(etpda)(4)FCl]PF(6), and Co(5)(etpda)(4)(NCS)(2)() employ the etpda ligand as "insulation" around a central pentametal-atom "wire." Compound, like all other oxidized pentachromium compounds, has very disparate alternating short-long-short-long Cr-Cr distances, 2.032(3) A, 2.560(6) A, 1.873(5) A, and 2.509(4) A. Compound shows a nearly uniform spacing of the Co atoms, although the outer Co-Co distances (2.279[4] A) are slightly longer than the inner ones (2.239[4] A).