Search

Two five‐coordinate mononuclear DyIII single‐molecule magnets [(TrapenTMS)Dy(L)] (Trapen=tris(2‐aminobenzyl) amine; TMS=SiMe3; L=OPMe31, OPEt32) have been synthesized by the reaction of [(TrapenTMS)Dy(THF)] and OPMe3, OPEt3, respectively. The molecular structures of 1 and 2 were fully established by single crystal X‐ray diffraction. The centre DyIII ions of both complexes exhibit distorted triangular bipyramid geometries, varying with different neutral ligands L on the apex. The TrapenTMS ligand forms the pyramid base of the trigonal bipyramid. Subtle structural modifications of the axial O‐ligand terminal substituent result in different dynamic magnetic behaviors. Magnetic data analysis reveals that 1 and 2 exhibit the characteristic behavior of SMM without a dc field, accompanying an unambiguous quantum tunneling of the magnetization. Field‐induced slow magnetic relaxation was observed for 1 and 2 under an applied bias dc field of 1000 Oe, the relaxation energy barriers are 107 K and 88 K for 1 and 2, respectively. We have investigated the differences in magnetism and magnetic anisotropy between the two complexes by ab initio calculations. [ABSTRACT FROM AUTHOR]

Main observation and conclusion: The issue of covalence of actinide complexes remains controversial to date. The introduction of 2‐phosphaethynolate anion into actinide complexes is expected to investigate the reaction mode and the bonding property. Herein, we describe the functionalization of An(TrenTIPS)Cl (1: An = U; 2: An = Th) precursors with NaOCP(dioxane)2.5 through salt‐elimination method leading to the formation of the corresponding uranium and thorium phosphaethynolate species: [U(TrenTIPS)(OCP)] (3) and [Th(TrenTIPS)(OCP)] (4). These two complexes were fully characterized by nuclear magnetic resonance (NMR), FT‐IR spectrum, UV‐vis‐NIR spectroscopies as well as X‐ray crystal diffraction. Computational analyses of the two complexes reveal that the U—O bond has a more covalent bond property than the Th—O bond due to more 5f orbital contribution for U. [ABSTRACT FROM AUTHOR]

The development of the uranyl cation as a powerful photocatalyst is seriously delayed in comparison with the advances in its fundamental and structural chemistry. However, its characteristic high oxidative capability in the excited state ([UO2]2+* (+2.6 V vs. SHE; SHE=standard hydrogen electrode) combined with blue‐light absorption (hv=380–500 nm) and a long‐lived fluorescence lifetime up to microseconds have reveals that the uranyl cation approaches an ideal photocatalyst for visible‐light‐driven organic transformations. Described herein is the successful use of uranyl nitrate as a photocatalyst to enable C(sp3)−H activation and C−C bond formation through hydrogen atom transfer (HAT) under blue‐light irradiation. In particular, this operationally simple strategy provides an appropriate approach to the synthesis of diverse and valuable diarylmethane motifs. Mechanistic studies and DFT calculations have provided insights into the detailed mechanism of the photoinduced HAT pathway. This research suggests a general platform that could popularize promising uranyl photocatalytic performance. [ABSTRACT FROM AUTHOR]

A practical and scalable protocol for visible‐light‐accelerated arylation and alkylation of quinoxalin‐2(1H)‐ones with hydrazines is reported. In this protocol, a hydrazone‐based two‐dimensional covalent organic frameworks (2D‐COF‐1) was employed as the heterogeneous photocatalyst (PC). Due to its excellent photocatalytic properties, good chemical stability and heterogeneous nature, the present method exhibits high efficiency, good functional group tolerance, easy scalability and remarkable catalyst reusability. More importantly, it provides an alternative way that allows rapid access to various C3 arylated or alkylated quinoxalin‐2(1H)‐ones in a greener and sustainable manner. [ABSTRACT FROM AUTHOR]

Abstract: A copper/iron‐cocatalyzed fluoroalkylative cyclization of 1,6‐enynes with readily available iodoperfluoroalkanes reagents for the synthesis of the corresponding fluoroalkylated pyrrolidines and benzofuran derivatives is reported. This novel protocol provides a mild method for the construction of Csp3‐CF2 and exocyclic double bonds in one step with high regio‐ and stereo‐selectivities. [ABSTRACT FROM AUTHOR]

Abstract: Herein, we reported a novel method to synthesize α‐trifluoromethylated ketones from enol triflates. Involving a cascade sulfur dioxide extrusion and a CF3 (trifluoromethyl) radical addition process, this reaction proceeds at room temperature and is driven by visible light irradiation. This protocol bears good functional group compatibility, which can generate the desired products in good to excellent yields even in gram scale. It is hoped that this approach to generate CF3 radicals from enol triflates can be used in other radical‐involved reactions. [ABSTRACT FROM AUTHOR]

A new type of axially chiral cyclo-[1,1′-biphenyl]-2,2′-diol (CYCNOL) ligands with adjustable dihedral angles have been developed by varying the bridge chain length. Eight-, nine- and ten-membered cyclo-ligands were prepared and evaluated by using two representative examples: enantioselective additions of diethylzinc to aldehydes and organometallic reagents to enones. The results revealed that the fine regulation of dihedral angles through variation of the bridge chain length was effective in the asymmetric synthesis. [ABSTRACT FROM AUTHOR]

A simple, efficient and practical iron-catalyzed azidoarylthiation of alkenes has been developed at room temperature, and the corresponding products containing ortho-sited sulfide and azide units were obtained in moderate to good yields with good tolerance of functional groups. The protocol uses readily available 1-(alkylthio)pyrrolidine-2,5-diones and trimethylsilyl azide as the alkylthiation and azidation reagents, respectively, inexpensive and environmentally friendly iron chloride as the catalyst without addition of any ligand and additive. [ABSTRACT FROM AUTHOR]

A simple and efficient catalyst-free method for isothiocyanatoalkylthiation of styrenes has been developed. The protocol uses (alkylthio)pyrrolidine-2,5-diones and trimethylsilyl isothiocyanate as the isothiocyanatoalkylthiolating reagents, dimethylformamide (DMF) as the solvent, and the reactions were completed within one hour with tolerance of some functional groups. No catalyst and additive were required in the reaction system, which avoided any contamination of transition metal catalysts in the target products. Therefore, the present method provides a convenient, efficient and practical strategy for the synthesis of compounds by a combination of sulfides and isothiocyanates. [ABSTRACT FROM AUTHOR]

Benzimidazol-2-ones have various biological functions and are usually prepared by reactions of substituted benzene-1,2-diamines with carbonyl-containing compounds or intramolecular N-arylations using substrates with carbon-halogen bonds. However, the starting materials of these protocols are often not readily available. Herein, a simple and practical metal-free oxidative C-H amidation of N, N′-diarylureas has been developed that takes place at room temperature. This protocol uses readily available N, N′-diarylureas as the starting materials and inexpensive PhI(OAc)2 as the oxidant without the need of a catalyst, ligand, or the exclusion of air. The present method has a wide functional group tolerance and affords a new and practical strategy for the synthesis of N-heterocycles. [ABSTRACT FROM AUTHOR]

A transition metal-free method for the trifluoromethylation of N-allylamides has been developed, and the corresponding trifluoromethyl-containing oxazolines were prepared in moderate to good yields. The protocol uses readily available substituted N-allylamides as the starting materials, inexpensive and easily stored sodium trifluoromethanesulfinate as the trifluoromethyl source, iodobenzene diacetate as the oxidant, and the procedure involves sequential intermolecular trifluoromethylation of alkenes with sodium trifluoromethanesulfinate and intramolecular cyclization. This is the first example to prepare CF3-containing oxazolines. Therefore, the present method should afford an efficient and practical strategy for synthesis of other CF3-containing cyclic compounds. [ABSTRACT FROM AUTHOR]

A novel, efficient, and practical method for the synthesis of imidazopyridine derivatives has been developed through the copper-catalyzed aerobic oxidative CH functionalization of substituted pyridines with N-(alkylidene)-4 H-1,2,4-triazol-4-amines. The procedure occurs by cleavage of the NN bond in the N-(alkylidene)-4 H-1,2,4-triazol-4-amines and activation of an aryl CH bond in the substituted pyridines. This is the first example of the preparation of imidazopyridine derivatives by using pyridines as the substrates by transition-metal-catalyzed CH functionalization. This method should provide a novel and efficient strategy for the synthesis of other nitrogen heterocycles. [ABSTRACT FROM AUTHOR]

Efficient copper-catalyzed aerobic oxidative CH and CC functionalization of 1-[2-(arylamino)aryl]ethanones leading to acridones has been developed. The procedure involves cleavage of aromatic CH and acetyl CC bonds with intramolecular formation of a diarylketone bond. The protocol uses inexpensive Cu(O2CCF3)2 as catalyst, pyridine as additive, and economical and environmentally friendly oxygen as the oxidant, and the corresponding acridones with various functional groups were obtained in moderate to good yields. [ABSTRACT FROM AUTHOR]

The asymmetric vinylogous Mukaiyama aldol reaction between α-keto phosphonate and 2-(trimethylsilyloxy)furan was performed by using bis(oxazoline)-copper complexes as the catalyst and 2,2,2-trifluoroethanol as additive in dichloromethane. The present method is highly tolerable for functionalized α-keto phosphonates and enabled us to obtain the corresponding 3- and 4-substituted benzyl-functionalized tertiary α-hydroxy phosphonates in high yields (up to 86%) as well as high enantiostereoselectivities (up to 98% ee) and diastereoselectivities (up to 99:1, anti-selective). [ABSTRACT FROM AUTHOR]

Keywords: alkylation; arylation; covalent organic frameworks; quinoxalin-2(1H)-ones; visible-light-driven This protocol features high efficiency, good functional group tolerance, easy scalability and remarkable catalyst reusability. This protocol features high efficiency, good functional group tolerance, easy scalability and remarkable catalyst reusability. [Extracted from the article]

A graphical abstract of the article "Catalyst-Free Isothiocyanatoalkylthiation of Styrenes with (Alkylthio)pyrrolidine-2,5-diones and Trimethylsilyl Isothiocyanate" by H. Tian et al. is presented.

The article presents a diagram which shows the chemical structure of the metal-free oxidative C-H amidation of N,N'-diarylureas with PhI(OAc)2 and the synthesis of benzimidazol-2-one derivatives.

A wide range of β-alkoxy sulfides are conveniently and efficiently obtained from alkenes using readily available 1-(arylthio)pyrrolidine-2,5-diones and alcohols as the oxysulfenylation reagents. [ABSTRACT FROM AUTHOR]

The title compounds are efficiently and simply obtained using readily available 1-(arylsulfanyl)pyrrolidine-2,5-diones as arylsulfanylating reagents and inexpensive boron trifluoride etherate as catalyst. [ABSTRACT FROM AUTHOR]

The article reports on Transition Metal-Free Trifluoromethylation of N-Allylamides with Sodium Trifluoromethanesulfinate.

The article presents chemical equations related to an article copper-catalyzed aerobic oxidative C-H functionalization of substituted pyridines by J. Yu and others published in a 2013 issue of the journal "Chemistry: A European Journal."

The new protocol uses an inexpensive catalyst and an economical and environmentally friendly oxidant. [ABSTRACT FROM AUTHOR]

The present method is suitable for functionalized α-keto phosphonates (II) and allows the synthesis of α-hydroxy phosphonates (III) bearing two chiral centers in high yields as well as high enantioselectivities. [ABSTRACT FROM AUTHOR]