Search

Trismus is one of the most debilitating and treatment-resistant complications resulting from head and neck oncological treatments. The objective of this study was to assess how primary tumour variables could assist in predicting chronic trismus. From a (retrospective) oncological database (Department of Oral and Maxillofacial Surgery, University Hospitals Leuven), tumour-related, surgical, and oral functional variables were reviewed. Contributing factors for chronic trismus, defined as a mouth opening of less than 35 mm, at least one year after treatment for oral squamous cell cancer, were assessed via logistic regression. A mediational analysis was conducted on the significant predictive variables. Thirteen out of 52 patients were observed to have chronic trismus. A significantly higher prevalence of trismus was found for increasing clinical T classification (p0.01), tumours based in the maxilla or the retromolar trigone (p = 0.04), after adjuvant radiotherapy (p = 0.04), and/or with masticatory muscle tumour invasion (p ≤ 0.02). Furthermore, radiotherapy significantly impacted T classification in chronic trismus, while T classification was significantly related to masticatory muscle invasion. Although radiotherapy and clinical T classification are well-established risk factors for postoperative trismus, masticatory muscle invasion should be considered as one of the main predictive factors.

The aim of this study was to perform a three-dimensional evaluation of the skeletal relapse of the proximal and distal mandibular segments following isolated bilateral sagittal split osteotomy advancement surgery. One hundred consecutive patients (mean age 25.8±11.7 years), comprising 65 female patients (mean age 26.4±12.1 years) and 35 male patients (mean age 24.6±11.0 years) requiring mandibular advancement without genioplasty, were enrolled prospectively in the study. Cone beam computed tomography scans were acquired for each patient at three time-points: preoperatively, immediately (1-6 weeks) after surgery, and 1 year after surgery. A validated tool was utilized to assess the surgical movement and relapse. Based on percentage, the majority of the distal and proximal translational and rotational movements relapsed within the range of ≤2mm and ≤2°. The distal segment revealed a significant relapse in a posterior, inferior, and clockwise pitch direction. Both left and right proximal segments showed a significant translational relapse in the medial, posterior, and superior direction. Amongst the rotational parameters, proximal segments relapsed significantly in clockwise pitch, clockwise roll, and counterclockwise yaw direction. Overall, both distal and proximal bone segments showed a clinically acceptable translational and rotational stability. The proximal segments torqued towards their original position with a reduction of flaring. ispartof: INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY vol:51 issue:1 pages:113-121 ispartof: location:Denmark status: published

OBJECTIVE: The objectives of this study were to assess observers' preference for standard screens (SSs) or medical displays (MDs) in visualizing difficult-to-diagnose radiographic dental abnormalities and their preference for dental filter tools when utilized with MD systems. STUDY DESIGN: A retrospective data set of 60 in vivo radiographs consisting of intraoral (n = 20), panoramic (n = 20), and cone beam computed tomography (n = 20) images was created. Three image display monitors, including an SS, an MD, and an MD with 3 dental filter configurations (bone-low density enhancement filter, tooth-high density enhancement filter, and a combined filter representing regular MD), were utilized to assess 4 observers' monitor preferences in detecting radiographically subtle dental abnormalities. The data were analyzed by using binomial distribution. A P value ≤.05 was considered statistically significant. RESULTS: Although observers expressed preference for MD for visualizing some abnormalities when examining intraoral and panoramic radiographs, MD was not preferred for detection of any abnormalities with cone beam computed tomography. There were no significant differences in preference for SS or MD overall (P ≥ .2024). Observers expressed significant preference for the filters in visualizing all but 2 abnormalities (P ≤ .0252). CONCLUSIONS: The use of MD monitors enabled with dental filter tools may be preferred for visualizing certain subtle abnormalities. ispartof: ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY vol:132 issue:4 pages:475-482 ispartof: location:United States status: published

The aim of this article is to evaluate the early and late morbidities of the donor- and recipient-site in patients undergoing mandibular reconstruction using either vascularized fibular flap (VFF) or vascularized iliac flap (VIF). Electronic databases, including PubMed, Web of Science, Cochrane Central and Embase, were explored for literature published until October 2020. A total of twenty-four articles reporting complications following mandibular reconstruction surgery with follow-up periods ranging from six to 63 months were selected based on the exclusion criteria. For each research, the JBI Critical Assessment Tool and the ROBINS-I Tool were used to analyze the methodological quality and the risk of bias. A single-arm meta-analysis was performed to have a synthesized analysis of the donor- and recipient-site early and late morbidities. Results showed that the early morbidities in VFF group ranged from 3% to 12%, and the late morbidities in VFF group ranged from 5% to 67%. In VIF group, the early morbidities ranged from 3% to 16%, and the donor-site late morbidities ranged from 6% to 43%. Complications with the top three morbidities in the VFF group were: chronic sensory disturbances at the donor-site (67%), malocclusion (22%) and chronic lower limb weakness (20%); and in the VIF group were: chronic sensory disturbances at the donor-site (43%), chronic pain at the donor-site (26%), chronic gait disturbance (20%). Further controlled clinical trials are needed to assess the long-term outcome of VFF or VIF grafting.

PURPOSE: Contemporary literature suggests a similar transverse stability of a surgical-assisted rapid palatal expansion and a segmented Le Fort I osteotomy. The aim of this study was to compare postoperative complications of 1-stage (segmental maxillary osteotomy) and 2-stage (surgical-assisted rapid palatal expansion followed by Le Fort I osteotomy) treated patients to determine the preferred treatment strategy. MATERIALS AND METHODS: This retrospective study included 74 consecutive patients (age range: 14 - 57 years; 36 males, 38 females) with a moderate transverse maxillary hypoplasia: 32 patients were treated in a 1-stage protocol and 42 in a 2-stage protocol with a postoperative follow-up of at least 1 year. Dental complications such as loss of teeth, gingival dehiscence, periodontal bone loss, apical root resorption, and surgical complications such as pain, hemorrhage, altered neurosensitivity, wound infection, aseptic necrosis were analyzed. Univariate analysis consisted of a generalized linear model with logit link or Fisher exact test. RESULTS: No significant difference was found for group characteristics except for longer orthodontic treatment time in the 2-stage group. Incidence and severity of complications were comparable for the 1-stage and 2-stage patients. Only overall pain was significantly greater in the 2-stage patient group (P = .038). CONCLUSIONS: Considering a similar complication rate and transversal stability, the choice between 1-stage and 2-stage approach for patients with a moderate transverse maxillary hypoplasia should be patient specific. ispartof: JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY vol:79 issue:7 pages:1531-1539 ispartof: location:United States status: published

AIM To evaluate 3D accuracy and outcome of a dynamic navigation method for guided root canal treatment of severe pulp canal obliteration (PCO) in 3D printed jaws. METHODOLOGY Three operators with different levels of experience in Endodontics performed navigated access cavities, using the Navident system (ClaroNav), in two sets (maxillary and mandibular) of 3D-printed jaw models with teeth presenting severe PCO. Models were mounted on a phantom to mimic a real clinical situation. After treatment, a postoperative high resolution Cone-Beam Computer Tomography (CBCT) scan (NewTom) was taken for each model and registered to the preoperative model. All access cavities were then segmented using 3-Matic Medical software 15.0 (Materialise). Length and volume of each access cavity were measured, and a comparison was done by measuring the distance deviation in mm at the coronal entry point, apical point, vertical deviation, total deviation and angular deviation of the access cavity in comparison with the virtual planning. Additionally, all access cavities were scouted with a size 10 K-file and inspected on the CBCT to confirm that the canal was located. Descriptive statistics for each parameter were performed. Normality of the data was assessed; data were transformed if needed to make it normally distributed. One-way analysis of variance (anova) was applied to assess differences between parameters for tooth type, jaw, and operators and corrected for simultaneous hypothesis testing according to Tukey. Significance level was set at .05. RESULTS After training with the system (28 cavities per operator), a total of 132 teeth and 168 access cavities (56 per operator) were prepared. All operators located a total of 156 canals, obtaining an overall success of 93% without a difference between operator experience (p > .05). The mean deviation at the apical point was 0.63 mm (SD 0.35) and was significantly lower in anterior teeth in comparison with molars (p

Introduction The initial position of an impacted maxillary canine might influence the outcome of surgically assisted exposure and orthodontic alignment. Therefore, the purpose of this study was to evaluate existing correlations between the initial position of the maxillary canine and the outcomes of treatment. Methods A retrospective cohort study was designed, containing data of 132 patients (47 males, 106 females; median age at the date of surgical exposure 14 ± 4.6 years; range, 10-39 years) with a total of 153 impacted maxillary canines. The sample was based on orthodontic referrals over 4 years at the Department of Oral and Maxillofacial Surgery, Rijnstate Hospital, Arnhem, the Netherlands. The esthetic outcome, treatment duration, and success and failure rate were investigated in relation to the initial position of the maxillary canine as assessed on pretreatment panoramic radiographs (vertical and anteroposterior sector position and angulation of the canine [α-angle]). The esthetic evaluation was performed using the Maxillary Canine Aesthetic Index. The success of treatment was defined as achieving a fully functional eruption of the canine, with an esthetically excellent result, without the need for reinterventions. Failure of treatment was defined as the need for reintervention or removal of the canine. Results In 96% of the impacted canines, a successful orthodontically assisted eruption was achieved. Age, vertical distance, and angulation are predictors of the esthetic outcome of impacted canines after treatment. Age, bilateral impaction, sector, vertical distance, and angulation are predictors of treatment duration. Age, vertical distance, and buccolingual position are predictors of the need for reintervention. Conclusions Pretreatment radiographic variables can help in predicting the outcome and treatment duration of surgically exposed maxillary impacted canines.

The purpose of this study was to validate the applicability of using maxillary voxel-based dentoalveolar registration (VDAR) at long-term follow up in orthognathic surgical patients. A retrospective sample of 25 patients (skeletal class II or III) who underwent bimaxillary orthognathic surgery was recruited and divided into two groups. Group A included 15 patients (seven females, eight males, mean (SD) age 25.8 (14.4) years) with unrestored dentition and group B involved 10 patients (five females, five males, mean (SD) age: 26.2 (11.9) years) with dental restorative treatment. Postoperative cone-beam computed tomography (CBCT) scans were acquired at four time-points, one to six weeks (T1), six months (T2), one year (T3) and two years (T4). Voxel- based registration was applied using the cranial base and then complete dental segment with part of the alveolar bone at T1-T2, T1-T3 and T1-T4 time-intervals. The translational and rotational accuracy and reproducibility of the registered maxillary segment was evaluated at these three intervals by analysing the transformation matrix using singular value decomposition. All translational and rotational measurements showed excellent reliability in both groups without any significant difference. The combined translational and rotational difference was found to be within the clinically acceptable range of 2mm and 4°. The VDAR was found to be accurate and reliable to be utilised for a long-term skeletal follow-up in orthognathic surgical patients.

This systematic review and meta-analysis was performed to evaluate the long-term hard tissue stability and relapse factors following surgical-orthodontic treatment in skeletal class II patients. A literature search was conducted using Embase, Cochrane Central, Web of Science, and PubMed, yielding 3184 articles published up to January 2019. Risk of bias was assessed following the Cochrane handbook. Ten articles met the inclusion criteria. A total of 1079 patients were followed up for 5-13 years. The qualitative findings showed a variety of extrinsic and intrinsic factors affecting long-term stability. Meta-analysis for the amount and direction of cephalometric landmark displacement in the vertical and sagittal planes showed significant angular increases of ANB and backward relapse of SNB, however within the clinically acceptable range of 4°. In relation to linear measurements, the mean differences in all landmarks were within the clinically acceptable range of 2mm except for gonion. In conclusion, this systematic review showed multiple intrinsic and extrinsic factors responsible for relapse. However, the outcomes of the meta-analysis are limited due to the heterogeneity of data, small number of studies, and inconsistent methods of evaluation. Further high-quality studies utilising standardised three-dimensional methodologies are required to improve the level of evidence.

Visualisation of the third dimension has been reported to increase effectiveness of correctly diagnosing traumatic dental injuries. To assess the ability of paediatric dentists to detect and diagnose Traumatic Dental Injuries (TDI) using two different imaging modalities, intraoral radiographs (2D) and CBCT scans (3D). In addition, observer’s confidence regarding the obtained diagnosis, using either technique, was assessed. Both 2D and 3D images of 20 dental trauma cases in children were presented in random order to a panel of thirteen paediatric dentists. Observers received instructions for the screening of the images for radiographic findings related to dental trauma, using structured scoring sheets for 2D and 3D images. Observed data were compared to those recorded by two experienced benchmark observers. A ten-point scale was used for assessing observer’s confidence regarding their final diagnosis using 2D versus 3D images. Performance of individual observers showed wide variation. Statistical significance was reached for correctly detected and correctly diagnosed findings (p = 0.02), in favor of 3D. Most of the observers reported comparable confidence using 2D and 3D, two observers were more confident using 3D and one observer was more confident using 2D. Paediatric dentist’s ability to detect and diagnose findings in patients with TDI was higher on 3D images. Most observers showed a similar confidence score of their diagnostic performance both on 2D and on 3D.

Tailored hydrogels mimicking the native extracellular environment could help overcome the high variability in outcomes within regenerative endodontics. This study aimed to evaluate the effect of the chemokine-binding and antimicrobial polymer, chlorite-oxidized oxyamylose (COAM), on the microstructural properties of fibrin and self-assembling peptide (SAP) hydrogels. A further goal was to assess the influence of the microstructural differences between the hydrogels on the in vitro behavior of human dental pulp stem cells (hDPSCs). Structural and mechanical characterization of the hydrogels with and without COAM was performed by atomic force microscopy and scanning electron microscopy to characterize their microstructure (roughness and fiber length, diameter, straightness, and alignment) and by nanoindentation to measure their stiffness (elastic modulus). Then, hDPSCs were encapsulated in hydrogels with and without COAM. Cell viability and circularity were determined using confocal microscopy, and proliferation was determined using DNA quantification. Inclusion of COAM did not alter the microstructure of the fibrin hydrogels at the fiber level while affecting the SAP hydrogel microstructure (homogeneity), leading to fiber aggregation. The stiffness of the SAP hydrogels was sevenfold higher than the fibrin hydrogels. The viability and attachment of hDPSCs were significantly higher in fibrin hydrogels than in SAP hydrogels. The DNA content was significantly affected by the hydrogel type and the presence of COAM. The microstructural stability after COAM inclusion and the favorable hDPSCs' response observed in fibrin hydrogels suggest this system as a promising carrier for COAM and application in endodontic regeneration. Supported by the Fund for Scientific Research-Flanders (FWO-Vlanderen) Grant number (G089213N), Research Council of KU Leuven Grant Numbers (C24/18/068), (C14/17/111), and KU Leuven Equipment Grant (KA/16/084).

Post-processing analysis can provide valuable information for diagnosis and planning of orbital disorders. This cross-sectional study aims to evaluate the reliability of semi-automatic, orbital fat volumetry using magnetic resonance imaging (MRI). Two observers assessed the orbital fat volume using a standard MRI protocol (3T, T1w sequence) in 12 orbits diagnosed with Graves' orbitopathy (GO) and 10 healthy control orbits. MRI and computed tomography (CT) based analysis were compared. Intra-observer variability was good (intraclass correlation coefficient (ICC) 0.88; 95% confidence interval (CI) [0.70, 0.95]) and interobserver agreement was moderate (ICC 0.55; 95% CI [-0.09, 0.81]), which corresponds to a mean percentage difference of 1.3% and 17.9% of the total orbital fat volume. Mean differences between MRI and CT measurements were, respectively, 1.1 cm3 (P= 0.064, 95% CI [-0.20, 2.43]) and 1.4 cm3 (P=0.016, 95% CI [0.21, 2.56]) for the control and the GO group. MRI volumetry was strongly correlated with CT (Pearson's r= 0.7, P

Although panoramic radiographs are extensively studied for diagnosis and preoperative planning in third molar surgery, research on the predictive value of this radiographic information regarding the postoperative recovery of patients remains underexploited. This prospective cohort study aimed to assess the potential relationship between radiologic risk indicators and persistent postoperative morbidity, in 1009 patients undergoing 2825 third molar extractions in context of the M3BE study. Two observers evaluated ten radiographic parameters: vertical and horizontal eruption status, third molar orientation, surgical difficulty, nerve relation, maxillary sinus relation, presence of periapical and pericoronal radiolucencies, caries, and third or second molar resorption. Patients’ postoperative recovery was recorded 3 and 10 days after surgery. Univariate logistic regression was performed to assess potential associations between radiographic risk indicators and persistent postoperative morbidity. Deep impactions were significantly associated with the persistence of postoperative pain, trismus and swelling until 10 days after surgery, prolonged need for pain medication, and the inability to resume daily activities and work/studies. Pericoronal radiolucencies and resorption were significantly associated with persistent morbidity and a longer recovery time, whereas caries and periapical lesions were linked to a shorter recovery time. Based on the results of this study, clinicians may better inform patients at risk for persistent postoperative discomfort according to what was preoperatively diagnosed on the panoramic radiograph. Preoperative panoramic radiographs contain information about patients at risk of prolonged recovery after third molar removal. Several risk indicators for persistent postoperative morbidity were identified.

Guided endodontics has been used for the treatment of anterior teeth with a successful outcome. This approach is not only limited to anterior teeth because it can also be used for the treatment of premolars and molars. However, in such cases, space may be a limitation because a long bur has to be used in addition to the guide being placed on top of the teeth. The aim of this case report was to present a novel guided endodontics technique using a sleeveless 3-dimensional-printed guide. This design can reduce vertical space, allowing an open view of the tooth and irrigation during drilling. A 46-year-old female patient consulted the endodontic department with intermittent pain around tooth #5. Tooth #5 presented pain upon percussion and responded negative to a cold test. The initial periapical radiograph revealed an apical radiolucency with pulp canal obliteration. Clinically, there was no sinus tract. The tooth was diagnosed with pulp necrosis and symptomatic apical periodontitis. Guided endodontic treatment was performed with a sleeveless 3-dimensional-printed guide and long neck carbide bur with a head diameter of 1 mm to drill a minimally invasive access cavity up to the root canal. A completely healed apical area of tooth #5 was visible after 1 year on periapical radiographs. This technique seems to be a promising alternative in comparison with the conventional guided endodontic guide design for the negotiation of pulp canal obliteration in cases in which vertical space is limited.

Purpose The present systematic review was conducted to assess the available literature on pathologies associated with third molar retention. Materials and Methods A systematic literature search was conducted in MEDLINE (PubMed), Embase, and Cochrane Library and reported in accordance with the Preferred Reporting Items for Systematic reviews and Meta-Analyses guidelines. Relevant reports were selected using predefined inclusion and exclusion criteria. Pathology related to third molar retention included caries, periodontal pathology, second molar external root resorption, and pathologic widening of the third molar pericoronal space. The methodologic quality of each study was reviewed using a pathology-specific tool to assess the risk of bias. Results A total of 37 studies were included for qualitative analysis. The available data showed that asymptomatic retained third molars frequently become diseased with increasing age of the patient and increased retention time. Caries and periodontal pathology were most frequently observed, especially in partially erupted third molars and mesially inclined mandibular third molars. Overall, the available data were regarded as medium to fair quality evidence. Conclusions The available data have revealed that retained asymptomatic third molars rarely remain disease-free over time. Increasing age and, thus, increasing retention time seemed associated with greater disease prevalence. Well-designed, prospective follow-up studies are needed to substantiate the clinical management of asymptomatic disease-free third molars.

Summary Background Long-term dental stability is one of the main objectives following combined orthodontic and orthognathic surgical treatment. It is influenced by multiple factors such as surgical, patient-related, and orthodontic aspects. While recent reviews mainly focus on short-term dental changes (0.5–2 years), longer follow-up dental stability remains hardly reviewed. Objectives The aim of this study was to evaluate long-term stability of dental and dentolabial changes following combined orthodontic and orthognathic surgical treatment with a minimum follow-up period of 5 years. Search methods A systematic search was conducted up to December 2019 using Pubmed, Embase, Web of Science, and Cochrane Central. Selection criteria Randomized controlled trials (RCTs), prospective and retrospective cohort studies, and case series with a minimum of 10 patients, which reported long-term dental stability following combined orthodontic and orthognathic treatment, were included. Data collection and analysis Long-term changes were assessed for overjet, overbite, maxillary, and mandibular incisors’ position and relationship of lip position to maxillary and mandibular incisors. Risk of bias was assessed according to the Cochrane Handbook. Results Following the screening of 3178 articles, 11 studies were included (2 RCT, 9 retrospective) with a postoperative follow-up period ranging from 5 to 15 years. A decrease in overjet was observed for patients with skeletal class III malocclusion, whereas overjet increased in class II patients at long-term follow-up. Overbite increased in class II patients, whereas class III showed variable results. The lower incisor position was more stable vertically than horizontally; the latter showing more outcome variability. Dentolabial changes corresponded to the normal ageing process and results were not clinically significant after long-term follow-up. Conclusion Current evidence suggests variability of dental and dentolabial stability in both skeletal class II and III patients. Further prospective studies are required to develop guidelines for long-term follow-up assessment using computer tomography or cone-beam computed tomography imaging, before final conclusions can be drawn. Registration The protocol for this systematic review (CRD42020133844) was registered in the International Prospective Register of Systematic Reviews (PROSPERO).

BACKGROUND: The objective of this review was to critically assess the existing literature on the relationship between the initial position of impacted canines and treatment outcomes. METHODS: We performed a systematic review of the available literature until February 2020 using the MEDLINE, Cochrane Central, Web of Science and PubMed databases. Prospective and retrospective studies (randomized controlled trials [RCTs], cohort studies, longitudinal follow-up studies) considering impacted maxillary canines that were orthodontically and/or surgically treated, and clearly reporting the initial position using 2D and/or 3D classifications, were included if they assessed at least one of the following: treatment success, treatment duration, number of treatment visits, radiographic outcome, periodontal health, esthetics and/or treatment complications. The included studies were assessed for risk of bias according to the Cochrane guidelines. RESULTS: Seventeen studies were reviewed (2 RCTs and 15 non-RCTs). The included studies enrolled a total of 1247 patients with an average age of 14.1 years and a total of 1597 impacted canines. Various causal relationships were detected between the success of treatment modalities and the initial state of the impacted canine (bucco-palatal position, vertical position, canine angulation, root development). DISCUSSION: Evidence, though limited, suggests that a higher alpha angle, higher vertical position and more mesial sector of the impacted canine are related to less successful interceptive and active treatment solutions, prolonged treatment time and inferior outcomes. ispartof: ORTHODONTICS & CRANIOFACIAL RESEARCH vol:24 issue:2 pages:180-193 ispartof: location:England status: published

To evaluate the performance of a new artificial intelligence (AI)-driven tool for tooth detection and segmentation on panoramic radiographs. In total, 153 radiographs were collected. A dentomaxillofacial radiologist labeled and segmented each tooth, serving as the ground truth. Class-agnostic crops with one tooth resulted in 3576 training teeth. The AI-driven tool combined two deep convolutional neural networks with expert refinement. Accuracy of the system to detect and segment teeth was the primary outcome, time analysis secondary. The Kruskal-Wallis test was used to evaluate differences of performance metrics among teeth groups and different devices and chi-square test to verify associations among the amount of corrections, presence of false positive and false negative, and crown and root parts of teeth with potential AI misinterpretations. The system achieved a sensitivity of 98.9% and a precision of 99.6% for tooth detection. For segmenting teeth, lower canines presented best results with the following values for intersection over union, precision, recall, F1-score, and Hausdorff distances: 95.3%, 96.9%, 98.3%, 97.5%, and 7.9, respectively. Although still above 90%, segmentation results for both upper and lower molars were somewhat lower. The method showed a clinically significant reduction of 67% of the time consumed for the manual. The AI tool yielded a highly accurate and fast performance for detecting and segmenting teeth, faster than the ground truth alone. An innovative clinical AI-driven tool showed a faster and more accurate performance to detect and segment teeth on panoramic radiographs compared with manual segmentation.

OBJECTIVE: The aim of this study was to assess observers' preference for a dentomaxillofacial dedicated medical display (MD) vs a general-purpose standard screen (SS) for in vitro and in vivo observation of normal radioanatomic features. STUDY DESIGN: The in vitro sample consisted of 2-dimensional (2-D) intraoral (n = 15), panoramic (n = 2), cephalometric (n = 2), and 3-dimensional (3-D) cone beam computed tomography (CBCT) (n = 9) data sets, acquired by utilizing commercially available skull and head-and-neck phantoms. The in vivo sample consisted of 80 radiographs (intraoral = 20; panoramic = 20; cephalometric = 20; and CBCT = 20). In vitro and in vivo data sets were both acquired by using Minray, Promax2-D, and Vistapano Ceph for 2-D images and Accuitomo, NewTom VGi evo, and Promax3-D for CBCT images. Five observers entered screen preferences when evaluating the appearance of radioanatomic structures on MD and SS. RESULTS: Both in vitro and in vivo assessments showed good interobserver and excellent intraobserver agreement. In vitro data suggested a significant preference for MD over SS for viewing radioanatomic features on panoramic and CBCT images, whereas MD was significantly preferred for in vivo images of all imaging modalities (P < .001). CONCLUSIONS: Overall, observers preferred MD over SS for both in vitro and in vivo observation of normal radioanatomic features irrespective of the imaging modality. ispartof: ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY vol:130 issue:2 pages:217-224 ispartof: location:United States status: published

The main aim is to identify, by means of different imaging modalities, the early bone changes in patients “at risk” and in stage 0 MRONJ. A search of the literature was performed on PubMed, Embase, Web of Science, and Cochrane Library databases, until June 9, 2020. No language or year restrictions were applied. Screening of the articles, data collection, and qualitative analysis was done. The Newcastle-Ottawa Scale (NOS) was used for observational studies, and the Systematic Review Centre for Laboratory Animal Experimentation’s (SYRCLE) risk of bias tool for the animal studies. A total of 1188 articles were found, from which 47 were considered eligible, whereas 42 were suitable for the qualitative analysis. They correspond to 39 human studies and 8 animal studies. Radiographic findings such as bone sclerosis, osteolytic areas, thickening of lamina dura, persisting alveolar socket, periapical radiolucency, thicker mandibular cortex, widening of the periodontal ligament space, periodontal bone loss, and enhancement of the mandibular canal were identified as early bone changes due to antiresorptive therapy. All those findings were also reported later in Stage 0 patients. The main limitations of these results are the lack of prospective data and comparisons groups; therefore, careful interpretation should be made. It is a fact that radiographic findings are present in antiresorptive-treated patients, but the precise timepoint of occurrence, their relation to the posology, and potential risk to develop MRONJ are not clear. The importance of a baseline radiographic diagnosis for antiresorptive-treated patients.

OBJECTIVE AND BACKGROUND: Little is known about structural and mechanical properties of leukocyte- and platelet-rich fibrin (L-PRF) membranes and even less about the influence of antithrombotic drugs on L-PRF. The aim of this in vitro study is therefore to investigate mechanical properties, fibrin structure and cell content of L-PRF membranes and the impact of anticoagulant therapy on L-PRF. METHODS: Blood samples were obtained from 12 volunteers and supplemented with either no, 1.25 IU, 2.5 IU, 5 IU, or 10 IU enoxaparin. L-PRF membranes were characterized with tensile testing, scanning electron microscopy, and measurement of platelets and leukocytes. Control and enoxaparin-supplemented L-PRF membranes were compared. RESULTS: At 10 IU enoxaparin, no L-PRF membranes could be generated, whereas the low doses of 1.25 and 2.5 IU had no influence on L-PRF properties. The mechanical properties, fibrin networks, and number of platelets and leukocytes of 5 IU supplemented membranes were unlike the control membranes, but were not found to be significantly different because of limited sampling and inter- and intra-variability. CONCLUSION: Low doses of the anticoagulant enoxaparin do not affect mechanical properties, fibrin network, nor cellular content of L-PRF, whereas high doses impair L-PRF generation. ispartof: JOURNAL OF PERIODONTAL RESEARCH vol:55 issue:5 pages:686-693 ispartof: location:United States status: published

The purpose of this study was to assess the accuracy of 2-dimensional morphometric parameters of root canals on different cone-beam computed tomographic (CBCT) images using 2 segmentation methods (operator dependent and Otsu's automatic), considering micro-computed tomographic (micro-CT) images as the reference standard.Ten mandibular molars were scanned by micro-CT imaging and 3 different CBCT devices: Accuitomo (J Morita Corporation, Kyoto, Japan), NewTom 5G (CEFLA, Imola, Italy), and NewTom VGi evo (CEFLA). The images were standardized and recorded using MeVisLab software (MeVis Medical Solutions AG, Bremen, Germany). Two calibrated examiners assessed the images of axial reconstructions quantitatively by 2-dimensional parameters (area, perimeter, roundness, and largest and smallest diameter). Fleiss kappa was performed to check interrater and intrarater reliability. The absolute error was calculated as the means and standard deviation. One-way analysis of variance was performed for comparison between the methods used by the operator and Otsu's automatic thresholding. To determine the accuracy of CBCT devices, the absolute error rate of each parameter was calculated using micro-CT measurements as the reference value with thresholding determined by the operator.The thresholding method performed by the operator had lower absolute error values for area, perimeter, and major and minor diameters, differing (P.05) from Otsu's automatic method, with no differences between the CBCT machines.An overestimation of area, roundness, and major and minor diameters and an underestimation of the perimeter were shown for the 3 CBCT machines evaluated. Thresholding determined by the operator is more accurate than that determined by Otsu's automatic method for the assessment of 2-dimensional morphometric parameters, which could direct influence in the diagnosis and endodontic treatment plan.

BACKGROUND/AIM: There is a lack of evidence regarding the radiological characteristics of a periapical radiolucency (PRL) fusion with the nasopalatine canal (NPC) following dentoalveolar trauma. The aim of this study was to assess the NPC enlargement resulting from fusion with a PRL and its relationship with the surrounding anatomical structures. MATERIAL AND METHODS: A total of 100 patients was retrospectively recruited and divided into two groups: case group and control group. The case group consisted of 50 cone-beam computed tomography scans of the maxilla of patients (32 males, 18 females; age range: 11-83 years) with a known history of dentoalveolar trauma in the maxillary anterior region and the presence of an undiagnosed and/or asymptomatic NPC and PRL fusion. An age- and gender-matched control group of 50 patients (32 males, 18 females; age range: 11-82 years) without trauma history to the upper anterior teeth, demonstrating normal maxillary scans, was recruited. A subjective scoring criterion was established for assessing the characteristics of the fused lesion and its relationship with the buccal/palatal alveolar cortex, nasal cavity cortex, NPC cortical border, and maxillary sinus floor. RESULTS: The fused NPC and PRL was mainly lobular in appearance (88%) with non-corticated well-defined margins (80%). Male patients showed larger (68%) dimensions compared with female patients (32%). The NPC cortical bone was the most commonly perforated structure in relation to fusion (72%), whereas maxillary sinus cortical bone was the least effected (2%). A statistically significant difference was observed between the NPC dimensions in the control and test groups, with fused lesions having larger mesiolateral, craniocaudal, and buccopalatal dimensions (P < .001). CONCLUSIONS: Periapical radiolucencies should be treated as soon as possible before they fuse with NPC. In case of fusion, surgical enucleation should be considered as the treatment of choice. ispartof: DENTAL TRAUMATOLOGY vol:36 issue:4 pages:438-445 ispartof: location:Denmark status: published

Orthognathic surgery involving the mandible can lead to remodelling of the temporomandibular joint (TMJ). Cone beam computed tomography (CBCT) provides an easily accessible three-dimensional (3D) approach to study this entity. A systematic review of the literature was performed with the aim of identifying condylar remodelling analysis protocols using CBCT-derived 3D models. The search yielded 10 eligible studies. The systematic review identified three pillars of a condylar remodelling analysis protocol that were retrievable from each of the included studies: (1) registration, (2) segmentation, and (3) analysis. The studies lacked consensus on how these pillars should be transferred to their respective protocol. Through critical assessment, criteria for a universal condylar remodelling analysis are suggested: (1) performance of a regional voxel-based registration of baseline and postoperative CBCT scans using an anatomical region not prone to postoperative changes, (2) application of a (semi-)automated 3D segmentation algorithm, (3) performance of a combination of both volumetric and surface-based 3D condylar analysis, and (4) extensive validation of each step of the protocol. The homogenization of condylar remodelling analysis protocols and their incorporation into virtual planning software suites raises the potential for the inclusion of larger numbers of patients in future prospective studies in order to gain evidence-based data. ispartof: INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY vol:49 issue:2 pages:207-217 ispartof: location:Denmark status: published

To verify whether mandibular cortical analyses accurately distinguish postmenopausal women with normal bone mineral density (BMD) from women with osteoporosis by means of a cone-beam computed tomography (CBCT)–driven composite osteoporosis index (three-dimensional mandibular osteoporosis index—3D MOI). The comparison was performed between 52 women with normal BMD and 51 women with osteoporosis according to dual-energy X-ray absorptiometry (DXA) examination of the lumbar spine and hip. Mandibular cortical width (MCW) and cortical quality were evaluated on cross-sectional and panoramic reconstructed images. ANOVA, ROC curves and accuracy measurements were used for statistical analyses, as well as a predictive model combining the quantitative and qualitative analyses and age. All CBCT-driven measurements presented good to moderate intra- and interobserver agreements. MCW values were significantly lower in women with osteoporosis. Postmenopausal women with osteoporosis were 8 times more likely to have the cortex classified as C3, and 2.4 times more likely to have MCW thinner than 2.75 mm. The area under the ROC curve was 0.8 for the predictive model. The newly developed 3D MOI enables distinguishing women with osteoporosis from those with normal BMD with good sensitivity and specificity. Whenever a CBCT scan is performed for specific clinical indications, a 3D MOI may be performed to qualitatively and quantitatively assess the condition of the mandibular cortex. This may be surely helpful to assess the osteoporosis status in the ageing population and more specifically in peri- or postmenopausal women.

Bleeding is a feared complication of minor oral surgery in patients on treatment with antiplatelet agents and there is no agreed strategy regarding the cessation or not of antiplatelet treatment. The aim of this systematic review was to evaluate bleeding with minor oral surgery in patients on dual antiplatelet therapy (DAPT), single antiplatelet therapy (SAPT), or no antiplatelet therapy (no APT). The PubMed, Embase, Web of Science, and Cochrane Library databases were screened. Sixteen studies were included. DAPT was continued in all studies. The perioperative bleeding risk was significantly higher for DAPT than for SAPT (risk ratio (RR) 10.16, P= 0.010; risk difference (RD) 0.35, P= 0.269), but not higher compared to no APT (RR 6.50, P= 0.057; RD 0.19, P= 0.060). The postoperative bleeding risk was significantly elevated for DAPT compared to SAPT (RR 2.61, P= 0.010) and no APT (RR 3.63, P= 0.035), but only by 1% (RD 0.01, P= 0.103) and 1% (RD 0.01, P= 0.421), respectively. Clinically, this may be considered quite similar. Additionally, local haemostatic measures could control all reported bleeding and no lethal events occurred. Therefore, DAPT interruption is not advised before minor oral surgery. ispartof: INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY vol:49 issue:1 pages:90-98 ispartof: location:Denmark status: published

This systematic review was performed to investigate the long-term hard tissue stability in orthognathic surgery patients with skeletal class III malocclusion. A literature search was conducted using the Embase, Cochrane Central, Web of Science, and PubMed databases, yielding 3690 articles published up to June 2018. Nine articles met the inclusion criteria; these reported skeletal changes in 886 patients with between 5 and 12.7 years of follow-up. Risk of bias was assessed according to the Cochrane Handbook. Results showed variations in stability based on age, facial pattern, surgical procedure, and fixation type. Young patients showed a greater increase in mandibular length and higher A-point stability after bimaxillary surgery than older patients. Dolichofacial patients showed skeletal relapse with a facial clockwise rotation, whereas counterclockwise rotation was observed in brachyfacial patients. Single mandibular setback surgery was linked to stability loss with decreased mandibular ramus and gonion angle; meanwhile, genioplasty fell into the highly stable surgery category. The hyoid bone relapsed significantly postero-inferiorly, which correlated with suprahyoid muscle changes but little to no mandibular position changes. Fixation with monocortical miniplates showed higher patient satisfaction and better stability compared to bicortical screw fixation. These conclusions should be regarded with caution because of the lack of current evidence from three-dimensional imaging. ispartof: INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY vol:49 issue:1 pages:51-61 ispartof: location:Denmark status: published

OBJECTIVES: The planning accuracy and stability during follow-up of segmented Le Fort I osteotomy, often evaluated using 2D cephalometry and dental cast analysis, is controversial. The aim of this study is to develop and validate a 3D semi-automatic, voxel-based registration assessment protocol to evaluate planning accuracy and stability of segmented Le Fort I osteotomy with individualization of the maxillary segments. METHODS: Preoperative, immediate postoperative and six months postoperative CBCT images were used to evaluate accuracy and stability of the individual segments in 20 patients (13 female; 7 male) who underwent segmented Le Fort I osteotomy. Three translational (left/right, intrusion/extrusion, anterior/posterior) and three rotational (pitch, roll, yaw) dimensions were calculated for each maxillary segment by means of a user-friendly module. Inter- and intra-observer Inter Class Coefficient (ICC) and mean absolute difference (MAD) were calculated. RESULTS: The inter- and intra-observer reliability ICC varied between 0.93 and 0.99 for the translational and rotational accuracy and stability assessments, indicating excellent reliability. The MAD ranged between 0.21 mm and 0.32 mm for the translational error and between 0.6° and 0.9° for the rotational dimension. CONCLUSIONS: The 3D assessment protocol for accuracy of segmented Le Fort I planning and short-term follow-up, proved to have high reliability with only a small margin of error. CLINICAL SIGNIFICANCE: The proposed 3D assessment protocol allows future in-depth analysis of segmented Le Fort I osteotomy and might implicate future improvement where necessary. ispartof: JOURNAL OF DENTISTRY vol:111 ispartof: location:England status: published

ObjectiveTo investigate the adherence to initially planned maxillofacial reconstructions using computer-assisted surgery (CAS) and to identify the influential factors affecting its compliance for maxillofacial reconstruction.Patients and MethodsA retrospective analysis of 136 computer-assisted maxillofacial reconstructive surgeries was conducted from January 2014 to June 2020. The categorical parameters involved age, gender, disease etiology, disease site, defect size, bone flap segments, and flap type. Apart from descriptive data reporting, categorical data were related by applying the Fisher-exact test, and a p-value below 5% was considered statistically significant (P < 0.05).ResultsThe main reasons for partial or non-adherence included unfitness, patient health condition, and other subjective reasons. Out of the total patient population, 118 patients who underwent mandibular reconstruction showed higher CAS compliance (83.9%) compared to the 18 midface reconstruction (72.2%) without any statistically significant difference (p = 0.361). Based on the size of the defect, a significantly higher CAS compliance (p = 0.031) was observed with a minor defect (80.6%) compared to the large-sized ones (74.1%). The bone flaps with two or more segments were significantly (p = 0.003) prone to observe a partial (15.4%) or complete (12.8%) discard of the planned CAS compared to the bone flaps with less than two segments. The malignant tumors showed the lowest CAS compliance when compared to other disorders without any significant difference (p = 0.1).ConclusionThe maxillofacial reconstructive surgical procedures offered optimal compliance to the initially planned CAS. However, large-sized defects and multiple bone flap segments demonstrated a higher risk of partial or complete abandonment of the CAS.

Background The purpose of this study was to objectively assess dimensional alteration (blooming artefact) on dental implant using 13 cone-beam computed tomography (CBCT) devices adjusted to device-specific scanning protocols and to assess whether subjective adjustment of brightness and contrast (B&C) could alter its visualization. Methods An anthropomorphic phantom containing a dental implant was scanned in 13 CBCT devices adjusted to three scanning protocols: medium-FOV standard resolution, small-FOV standard resolution, and small-FOV high resolution. The diameter of the implant was measured at five levels, averaged, and compared with those from a reference standard industrial CT image. B&C adjustments were performed and measurements were repeated. The intraclass correlation coefficient assessed the reliability of the measurements and general linear mixed models were applied for multiples comparisons at a 95% confidence interval. Results Implant diameter obtained from small-FOV high-resolution protocols in most CBCT devices was not significantly different when compared to that from the reference (p > 0.05). For standard protocols, significant dimensional alteration of the implant ranging from 23 to 34% (0.67 to 1.02 mm) was observed in 9 CBCT devices for small-FOV scanning (p < 0.05), and in 8 CBCT devices for medium-FOV scanning, implant dimensional alteration ranged significantly from 21 to 35% (0.62 to 1.04 mm). After B&C adjustments, dimensional alteration was reduced for several of the CBCT devices tested (p < 0.05). Conclusions The visualization of the implant dimensional alteration differed between CBCT devices and scanning protocols with an increase in diameter ranging from 0.27 to 1.04 mm. For most CBCT devices, B&C adjustments allowed to reduce visualization of implant blooming.

OBJECTIVE To investigate the relationship between preoperative trabecular bone structure and implant outcome based on bone morphometric bone parameters from CBCT scans. MATERIALS AND METHODS Twenty consecutive cases with early implant failure in the posterior region of the mandible were matched with 20 control patients with a successful implant osseointegration selected. All patients had taken a preoperative CBCT image according to a standardized acquisition protocol. On these CBCT scans, the trabecular bone of each implantation site was selected and segmented, after which 3D morphometric bone parameters were calculated and used in a cluster analysis to objectively differentiate trabecular bone patterns. Fisher's exact test was used to determine whether there is a significant association between trabecular pattern and implant outcome. RESULTS A sparse, intermediate, and dense trabecular bone pattern was distinguished by cluster analysis. The relationship between the trabecular bone pattern and early implant failure was significant (z = 9.6; p

Aim The aim of the study was to evaluate whether the use of a xenograft is not inferior to the use of xenograft and autogenous bone chips in treating dehiscences at implant placement. Materials and methods After implant placement, leaving a dehiscence, control sites were treated using a composite graft (autogenous bone chips and xenograft) and at the test sites 100% xenograft was used. Both sites were covered with a resorbable collagen membrane. Dehiscences were measured clinically at implant placement and at re-entry. CBCT was taken immediately after implant placement and after 4 months. Results In total, 28 GBR procedures were performed in 14 patients. On average, the change in vertical defect height was 2.07 mm (46.7%-test group) and 2.28 mm (50.9%-control group) (p > .05). The horizontal defect width at the implant shoulder change on average 1.85 mm (40.5%-test group) and 1.75 mm (40.9%-control group) (p > .05). On average, a loss in augmentation thickness of 0.45 mm (68.9%-test group) and 0.64 mm (55.5% control group) between implant placement and augmentation and abutment surgery was obtained at the implant shoulder. Conclusion Both treatment modalities seem to work to a certain extent. At implant shoulder level, the augmentation thickness seems to be disappeared after the healing phase. (NCT03946020).

Objectives To evaluate the peri-implant trabecular bone volume and architecture changes with 6-month follow-up after local application of platelet-rich plasma (PRP) and platelet-poor plasma (PPP) using high-resolution micro-CT. Material and methods Seventy-two dental implants were placed into healed mandibular sites of 9 beagle dogs. Implants were randomly divided into 4 groups following a split-mouth design: control I; control II; PPP; and PRP. Primary and secondary stabilities were assessed using resonance frequency analyses. At 1, 3, and 6 months after implant loading, trabecular structural parameters were evaluated at 0.5, 1, and 1.5 mm away from implants using micro-CT (voxel = 20 μm). Results Primary and secondary stabilities were equivalent in all conditions. PPP and PRP groups showed higher bone volume fraction (BV/TV) and trabecular thickness (Tb.Th) but lower trabecular separation (Tb.Sp) and total porosity percentage (Po (tot)) at all 3 time points. A significant decrease in BV/TV and Tb.Th was found for the control groups after 3 months of healing, while this was not observed in both the PPP and PRP groups. However, no distinct difference was found between the PRP and PPP groups over time. Moreover, as the investigated distance from the implant surface increased, BV/TV and Po (tot) within the same group and time point stayed the same, yet Tb.Th and Tb.Sp continued to increase. Conclusions Platelet-rich plasma and PPP with conventional implant placement lead to similar primary and secondary implant stability, but improved peri-implant bone volume and structural integration. The present research does not seem to suggest a different bone remodeling pattern when using PRP or PPP.

To provide an indication-based and scanner-specific radiation dose and risk guide for paediatric patients undergoing dental and maxillofacial cone beam computed tomography (CBCT) examinations. Five commercially available scanners were simulated in EGSnrc Monte Carlo (MC) code. Dedicated, in-house built, head and neck voxel models, each consisting of 22 segmented organs, were used in the study. Organ doses and life attributable risk (LAR) for cancer incidence were assessed for males and females, aged 5 to 14 years old, for every clinically available protocol: central upper and lower incisors, upper and lower premolars, upper and lower jaws, cleft palate, temporal bone, sinus, dentomaxillofacial complex, and face and skull imaging. Dose results were normalised to the x-ray tube load (mAs) and logarithmic curves were fit to organ dose and risk versus age data. Females demonstrated higher LAR values in all cases. A well-established dose decreasing pattern with increasing age-at-exposure was observed. Central upper incisor protocols were those with the lowest risk, contrary to skull protocols which provided the highest LAR values. Salivary glands and oral mucosa were the highest irradiated organs in all cases, followed by extrathoracic tissue (ET) in protocols where the entire nasal cavity was inside the primary field. The dose to thyroid was considerably high for younger patients. This work provides an extensive dose assessment guide for 5 dental CBCTs, enabling detailed dose assessment for every paediatric patient. • Radiation dose concerns due to the growing use of paediatric dental and maxillofacial CBCT underline the need for justification that should in part be based on radiation exposure in radiology. • Patient-specific dose calculations based on Monte Carlo simulations and head-neck paediatric voxel models overcome the limitations of conventional thermoluminescent dosimeter (TLD) dosimetry and provide proper guidance for justification of CBCT exposures. • Monte Carlo simulations with head-neck models reveal an organ dose and radiation risk decreasing pattern with increasing age at exposure, and with decreasing size of the scanning volume of interest (field of view).

A narrative review on the potential use of low-dose protocols for cone beam computed tomography (CBCT) was conducted to identify indications and their relevance for various dental disciplines. Google Scholar was searched using the words “low-dose CBCT”. Reviews, consensus papers, clinical studies, and experimental studies were eligible for the initial screening process, but for data extraction only original articles were selected. Similar search procedures were then performed with the additional search words “pedo,” “ortho,” “endo,” “implant,” “perio,” and “oral surgery.” Furthermore, references of included articles were examined to identify further relevant articles. After screening, 27 publications remained for the data extraction process. Low-dose protocols have been reported for specialties such as pediatric dentistry (evaluating orofacial clefts, periapical lesions, impacted teeth, and autotransplantation), orthodontics (cephalometric analysis and interim assessment of treatment results), endodontics (detecting root fractures, resorptions and periapical bone loss), implant dentistry (planning implant insertion, evaluating peri-implant fenestration and dehiscence), periodontology (assessing periodontal structures), and oral and maxillofacial surgery (assessing mandibular third molars and TMJs). Nevertheless, most of the literature available is related to non-clinical studies. Furthermore, there is a lack of position statements or guidelines from authoritative bodies regarding the use of low-dose protocols in dental medicine. Low-dose protocols for CBCT imaging seem to have potential in various disciplines in dental medicine ranging from pediatric dentistry to oral and maxillofacial surgery. Dose reduction is usually achieved by mAs reduction, use of partial rotations, reduced number of projections, and larger voxel sizes, but seldom by kV reduction. Albeit low-dose protocols have potential to result in a reduction of dose exposure for 3D imaging due to dental indications, there is a need to more clearly specify indications and limitations to avoid indiscriminate use of standard and high-dose CBCT scans in the future on the lines of ALARA/ALADA principles.

PURPOSE: To evaluate the feasibility and efficacy of a novel concept of early loaded (ie, within 2 weeks) implant-supported fixed dental prostheses (ISFDP) for patients who underwent mandibular reconstruction. MATERIALS AND METHODS: All patients requiring mandibular reconstruction between July 2013 and March 2016 at AZ Sint-Jan Brugge-Oostende AV were screened for dental rehabilitation according to the proposed concept. Of 17 patients, 10 were eligible for inclusion. Clinical and radiologic assessments of implant integration and prosthetic survival were performed at 6, 12, 24, and 36 months. Patient satisfaction was assessed prior to and after prosthetic rehabilitation using the European Organisation for Research and Treatment of Cancer Quality of Life Questionnaires Core 30 and Head & Neck 35, as well as a visual analog scale. RESULTS: Ten patients received mandibular reconstructive surgery for an oral cavity tumor (n = 6), osteoradionecrosis (n = 3), or medication-related osteonecrosis of the jaw (n = 1). Implants were placed within an average of 6 (2 to 21) months postsurgery in a one-stage procedure. Prosthetic rehabilitation was achieved within 2 weeks in 8 of the 10 patients. Two patients received their ISFDP delayed due to postoperative complications. Implant integration and prosthetic outcome at a maximum of 36 months of follow-up were successful in 7 of the 10 patients. At that time, two patients had passed away, while one patient had the ISFPD removed because of graft necrosis after radiotherapy. Patient satisfaction was high, with significant improvement after dental rehabilitation in comparison to mandibular reconstruction alone. CONCLUSION: The present concept offers a feasible and fast prosthetic rehabilitation that improves patient quality of life. ispartof: INTERNATIONAL JOURNAL OF PROSTHODONTICS vol:32 issue:2 pages:162-173 ispartof: location:United States status: published

The aim of our study was to identify and predict patients at risk of impeded mandibular third molar eruption and potential relation between the third molar roots and the mandibular canal, based on molar angulations in an early development stage.A total of 1011 adolescent orthodontic patients were included in this longitudinal study.We analysed pre-eruptive rotational changes and root development of mandibular third molars on 2022 panoramic radiographs (two time-points). Five variables were evaluated: third molar eruption level, development stage, risk of relation between the third molar and the mandibular canal, the molar angulations and orthodontic treatment. The relation between early third molar angulation and mean annual angulation change was assessed using a linear mixed model. Logistic regression was applied to investigate a potential correlation of the radiographic variables with the eruption potential and risk of developing a relation between the third molar and the mandibular canal.Mandibular third molar follicles with an initial angulation exceeding 27.0° relative to the second molar tend to progressively increase their angulation during further development. A significant correlation was found between the hemimandibular molar angulations and the probability of eruption (P 0.0001). The second to first molar angulation was predictive for potential development of a relation with the mandibular canal (P = 0.005).From the present data, it appears that severely angulated mandibular third molars (27.0°) have a minimal chance of future eruption and a maximal risk of developing a relation with the mandibular canal.

This retrospective study evaluated the visibility, location, and morphology of the primary maxillary ostium (PMO), as well as the presence and number of accessory maxillary ostia (AMO) in the maxillary sinus using cone beam computed tomography (CBCT). CBCT scans with a large field of view with both maxillary sinuses entirely visible, acquired from February 2016 to February 2018, were initially screened. Patients were included if there was no history of surgical intervention/trauma in the sinus region. Two observers evaluated the CBCTs for PMO and AMOs independently. PMO and AMOs were evaluated in axial, coronal, and sagittal CBCT views. In case of disagreement, a third observer served as a referee. The findings were correlated with age, gender, condition of the sinus mucosa, and status of the dentition to assess for potential influencing factors. A total of 184 patients (368 maxillary sinuses) were included. PMO was present and patent in 346 (94.0%) of the 368 analyzed sinuses. Most of the PMOs were located above the attachment of and in the middle third of the inferior turbinate (76.1%) and exhibited a slit shape (71.1%). An AMO was present in 167 (45.5%) of the 368 analyzed sinuses, and 66 (17.9%) sinuses had multiple AMOs. Gender and sinus mucosa morphology were found to be influencing factors for the patency of the PMO. Furthermore, gender seems to be influencing the presence of an AMO. Most of the analyzed maxillary sinus cavities in the present population had a patent PMO. Being male and having morphological changes of the sinus mucosa were factors associated with a reduced prevalence of a patent PMO. A maxillary sinus with pathological findings of the mucosa seems to have a reduced prevalence of patent PMOs. Therefore, clinicians should take care to assess any clinical and radiographical sign indicating a potential maxillary sinusitis prior to surgical interventions in this region, especially in cases with planned sinus floor elevation.

The aim of this study was to evaluate the factors influencing the volume of healthy maxillary sinuses by means of cone beam computed tomography (CBCT). The sinus volumes in bilateral CBCT images of healthy maxillary sinuses of patients aged 18 years or older were evaluated using dedicated 3D volumetric software. Differences in volume based on gender, age, sinus side, and dental status were analyzed statistically. The study included 174 healthy maxillary sinuses in 87 patients (60 women and 27 men) aged between 18 to 82 years with a mean age of 29.5 years. There were 73 dentate sinuses and 101 partially dentate or edentulous sinuses. Males had significantly larger maxillary sinus volumes compared to females. Subjects below the median age of 24.3 years had a significantly larger sinus volume than older subjects. There was no difference in sinus volume between left and right sides. When partially dentate and edentulous cases were pooled together and compared to dentate cases, there was no difference in sinus volume. Gender and age influence healthy maxillary sinus volume, while sinus side and dental status do not. Neither tooth loss nor increasing age could be correlated with ongoing pneumatization of the maxillary sinus in the present population. Thus, the reported increase of the maxillary sinus volume over life and following extraction of posterior teeth in the upper jaw might be considered a misconception. To prove this hypothesis, prospective studies comparing sinus volumes using standardized time intervals before and after tooth extraction in the posterior maxilla are needed.

Allergic rhinitis (AR) affects 23-30% of the European population with equal prevalence reported in Belgium. Despite guidelines on the correct use of effective treatment, up to 40% of AR patients remain uncontrolled. Allergen immunotherapy (AIT) has been shown to improve the level of control up to 84% of patients being controlled by AIT. Recently, new guidelines for AIT have been published, supporting the clinical evidence for effectiveness of various subcutaneous and sublingual products for AIT in patients who are allergic to airborne allergens. AIT in AR patients not only reduces nasal and/or ocular symptoms but also induces tolerance and has preventive potential. Adoption of AIT into daily clinical practice in Belgium and other European countries is hampered primarily by reimbursement issues of each of the single products but also by several patient- and physician-related factors. Patients need to be better informed about the effectiveness of AIT and the different routes of administration of AIT. Physicians dealing with AR patients should inform patients on tolerance-inducing effects of AIT and are in the need of a harmonized and practical guide that supports them in selecting eligible patients for AIT, in choosing evidence-based AIT products and in following treatment protocols with proven efficacy. Therefore, a stepwise and holistic approach is needed for better adoption of AIT in the real-life setting in Belgium. ispartof: CLINICAL AND TRANSLATIONAL ALLERGY vol:9 issue:1 ispartof: location:England status: published

Objective The aim of this study was to assess the performance of 2 metal artifact reduction (MAR) algorithms in cone beam computed tomography (CBCT) imaging, considering different materials, metal positions, and fields of view (FOVs). Study Design Nine phantoms containing cylinders of amalgam, copper–aluminum (Cu-Al) alloy, and titanium were scanned by using Picasso Trio and ProMax 3D CBCT units with small and medium FOVs. Scans were made with and without MAR algorithms. The standard deviation (SD) of voxel gray values was measured in the neighborhood of the cylinders. Differences in SD were statistically evaluated for effects of MAR and the other parameters, with a significance level of 5%. Results Significant differences between images with MAR and those without MAR for both devices (P ≤ .0001) were observed. Amalgam showed the largest artifact expression, followed by Cu-Al and titanium. After correction, differences remained only in Picasso Trio images (P = .002). Considering positions, no significant difference in the performance of the MAR algorithm was observed in either device. Considering FOVs, significant differences were observed for ProMax 3D (P = .005), with less artifact expression in the medium FOV after MAR correction. Conclusions MAR algorithms were effective for artifact reduction despite variation in performance according to device, FOV, and material properties. The position of the metal cylinder within the FOV had no significant effect.

Made available in DSpace on 2021-06-25T15:06:17Z (GMT). No. of bitstreams: 0 Previous issue date: 2021-06-01 Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Fundacao de Apoio a Pesquisa do Distrito Federal European Union Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant Aarhus University Research Foundation (AIAS-COFUND) Introduction: The purpose of this study was to classify 10 cone-beam computed tomographic (CBCT) devices using a ranking model according to the detection of fine endodontic structures. Methods: A dedicated dentate anthropomorphic phantom was scanned 2 times using 10 CBCT devices without any metal (metal-free condition) and with an endodontically treated tooth containing a metallic post (metal condition). A reference image acquired on an industrial micro-CT scanner was used to register all CBCT images, yielding corresponding anatomic slices. Afterward, 3 experienced observers assessed all acquired CBCT images for their ability to assess a narrow canal, isthmus, and apical delta ramification using a categoric rank from 1 (best) to 10 (worst). Fleiss kappa statistics were used to calculate intra-and interobserver agreements for each CBCT device separately. Based on the observers' scores, general linear mixed models were applied to compare image quality among different CBCT devices for performing endodontic diagnostic tasks (a 5 .05). Results: The 10 CBCT devices performed differently for the evaluated endodontic tasks (P , .05), with 3 devices performing better for endodontic feature detection. Yet, in the presence of metal, only 2 devices were able to keep a high level of endodontic feature detection. Conclusions: The evaluated endodontic tasks were CBCT device dependent, and their detection was influenced by the presence of metal. (J Endod 2021;47:947-953.) Sao Paulo State Univ, Sch Dent, Dept Restorat Dent, Araraquara, SP, Brazil Katholieke Univ Leuven, OMFS IMPATH Res Grp, Dept Imaging & Pathol, Fac Med, Leuven, Belgium Univ Hosp Leuven, Oral & Maxillofacial Surg, Leuven, Belgium Univ Estadual Campinas, Piracicaba Dent Sch, Div Oral Radiol, Dept Oral Diag, Piracicaba, SP, Brazil Univ Brasilia, Dept Dent, Fac Hlth Sci, Brasilia, DF, Brazil Aarhus Univ, Aarhus Inst Adv Studies, Aarhus, Denmark Katholieke Univ Leuven, Dept Mech Engn, Leuven, Belgium Karolinska Inst, Dept Dent Med, Stockholm, Sweden Sao Paulo State Univ, Sch Dent, Dept Restorat Dent, Araraquara, SP, Brazil CAPES: 001 FAPESP: 2019/22885-0 Fundacao de Apoio a Pesquisa do Distrito Federal: 23106.013588/2019-5 European Union Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant: 754513

OBJECTIVE: To assess the anatomical and tactile quality of 3D printed models derived from medical printers for application in orthognathic surgery. METHODS: A CBCT-scan of an 18 years old female patient was acquired with NewTom VGi evo (NewTom, Verona, Italy). Thereafter, mandibular bone was segmented and isolated from the scan using Mimics inPrint 2.0 software (Materialise NV, Leuven, Belgium). Six printers with different technologies were utilized for printing skeletal models, which included stereolithography (ProX800, 3D Systems, Rock Hill, SC, USA), digital light processing (Perfactory 4 mini XL, Envisiontec, Dearborn, MI, USA), fused deposition modeling (uPrint SE, Stratasys, Eden Prairie, MI, US), colorjet (ProJet CJP 660Pro, 3D Systems, Rock Hill, SC, USA), multijet (Objet Connex 350, Stratasys, Eden Prairie, MN, USA) and selective laser sintering (EOSINT P700, EOS GmbH, Munich, Germany). A questionnaire was designed, where 22 maxillofacial residents scored whether the printed models were able to mimic bone color, texture and anatomy. Five maxillofacial surgeons performed bone cutting with screw insertion/removal to assess the tactile perceptibility. RESULTS: In relation to texture and cortical and medullary anatomy replication, Perfactory 4 mini XL printer showed the highest mean score, whereas, Objet Connex 350 scored highest for color replication. The haptic feedback for cutting and screw insertion/removal varied for each printer, however, overall it was found to be highest for ProX800, whereas, EOSINT P700 was found to be least favorable. CONCLUSIONS: The digital light processing based Perfactory 4 mini XL printer offered the most acceptable anatomical model, whereas, deficiencies existed for the replication of haptic feedback to that of real bone with each printer. CLINICAL SIGNIFICANCE: The study outcomes provide pearls and pitfalls of 3D printed models utilizing various printers and technologies. There is a need for research on multi-material printing as such to improve the haptic feedback of skeletal models and render the models more human bone-like to improve surgical planning and clinical training. ispartof: JOURNAL OF DENTISTRY vol:109 ispartof: location:England status: published

OBJECTIVES: This study aimed to identify potential clinical and radiological predictors associated with the outcome of discectomies. METHODS: In this retrospective observational study, the material comprised preoperative CBCT images and medical records of 62 patients with disc derangement disorders, who had undergone discectomy because of disc displacement with reduction (DDwR), disc displacement without reduction (DDwoR), systemic arthritis (SA), or joint hypermobility. Clinical and radiographic variables were analysed in relation to success rate determined by subjective, objective and combined outcomes. RESULTS: The success odds ratio was 11 times higher in patients with painful DDwR versus that of SA (p = 0.03), and even 25.9 times higher when considering solely objective outcome (p = 0.03). In the absence of subchondral pseudocyst, there were 5.2 times higher odds to have a successful subjective outcome (p = 0.04). Extensive bone apposition on the temporal joint component indicated a 9.3 times higher likelihood of a failed objective outcome (p = 0.04). CONCLUSIONS: There is a significant higher risk for combined outcome failure for the diagnosis SA involving the TMJ compared with DDwR. Predictors of importance based on CBCT findings related to the objective outcome failure were extensive bone apposition on the temporal joint component and condylar subchondral pseudocysts for the subjective outcome failure. ispartof: ORAL DISEASES vol:28 issue:8 pages:2185-2193 ispartof: location:Denmark status: published

OBJECTIVE: The aim of this study was to compare the diagnostic performance of convolutional neural networks (CNNs) with the performance of human observers for the detection of simulated periapical lesions on periapical radiographs. STUDY DESIGN: Ten sockets were prepared in bovine ribs. Periapical defects of 3 sizes were sequentially created. Periapical radiographs were acquired of each socket with no lesion and with each lesion size with a photostimulable storage phosphor system. Radiographs were evaluated with no filter and with 6 image filter settings. A CNN architecture was set up using Keras-TensorFlow. Separate CNNs were evaluated for randomly sampled training/validation data and for data split up by socket (5-fold cross-validation) and filter (7-fold cross-validation). CNN performance on validation data was compared with that of 3 oral radiologists for sensitivity, specificity, and area under the receiver operating characteristic curve (ROC-AUC). RESULTS: Using random sampling, the CNN showed perfect accuracy for the validation data. When data were split up by socket, the mean sensitivity, specificity, and ROC-AUC values were 0.79, 0.88, and 0.86, respectively; when split up by filter, they were 0.87, 0.98, and 0.93, respectively. For radiologists, the values were 0.58, 0.83, and 0.75, respectively. CONCLUSIONS: CNNs show promise in periapical lesion detection. The pretrained CNN model yielded in this study can be used for further training on larger samples and/or clinical radiographs. ispartof: ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY vol:131 issue:5 pages:610-616 ispartof: location:United States status: published

The aim of this retrospective observational study was to assess the potential agreement between independent magnetic resonance imaging (MRI) and arthroscopic findings and their respective contributions to a final diagnosis in patients with refractory temporomandibular joint disorders. Two dentomaxillofacial radiologists and two oral and maxillofacial surgeons scored 50 joints. All observers, who were blinded to additional clinical information, used a specific scoring form and selected one or more diagnostic labels. Agreement between MRI and arthroscopy and their contributions to the final diagnosis were assessed as primary outcomes using Fleiss' kappa. Intra-modality agreement and the correlation between signal intensity ratio (SIR) measurements on MRI and synovitis grading on arthroscopy were assessed as secondary outcomes. Agreement between MRI and arthroscopy was poor. A fair level of agreement was only reached for reduction capacity of the disc and disc perforation. Arthroscopic diagnostic labels matched better with the final diagnosis, suggesting a bigger contribution to that diagnosis. Higher SIR measurements correlated with higher synovitis grading scores for the retrodiscal tissue and the posterior band of the disc. Intra-modality agreement was better in arthroscopy. When blinded to clinical information, arthroscopy and MRI observations can lead to different conclusions. The diagnostic outcomes of both examinations should be considered and integrated into a final diagnosis. ispartof: INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY vol:50 issue:5 pages:657-664 ispartof: location:Denmark status: published

INTRODUCTION: Tooth segmentation on cone-beam computed tomographic (CBCT) imaging is a labor-intensive task considering the limited contrast resolution and potential disturbance by various artifacts. Fully automated tooth segmentation cannot be achieved by merely relying on CBCT intensity variations. This study aimed to develop and validate an artificial intelligence (AI)-driven tool for automated tooth segmentation on CBCT imaging. METHODS: A total of 433 Digital Imaging and Communications in Medicine images of single- and double-rooted teeth randomly selected from 314 anonymized CBCT scans were imported and manually segmented. An AI-driven tooth segmentation algorithm based on a feature pyramid network was developed to automatically detect and segment teeth, replacing manual user contour placement. The AI-driven tool was evaluated based on volume comparison, intersection over union, the Dice score coefficient, morphologic surface deviation, and total segmentation time. RESULTS: Overall, AI-driven and clinical reference segmentations resulted in very similar segmentation volumes. The mean intersection over union for full-tooth segmentation was 0.87 (±0.03) and 0.88 (±0.03) for semiautomated (SA) (clinical reference) versus fully automated AI-driven (F-AI) and refined AI-driven (R-AI) tooth segmentation, respectively. R-AI and F-AI segmentation showed an average median surface deviation from SA segmentation of 9.96 μm (±59.33 μm) and 7.85 μm (±69.55 μm), respectively. SA segmentations of single- and double-rooted teeth had a mean total time of 6.6 minutes (±76.15 seconds), F-AI segmentation of 0.5 minutes (±8.64 seconds, 12 times faster), and R-AI segmentation of 1.2 minutes (±33.02 seconds, 6 times faster). CONCLUSIONS: This study showed a unique fast and accurate approach for AI-driven automated tooth segmentation on CBCT imaging. These results may open doors for AI-driven applications in surgical and treatment planning in oral health care. ispartof: JOURNAL OF ENDODONTICS vol:47 issue:5 pages:827-835 ispartof: location:United States status: published

Automatic craniomaxillofacial (CMF) three dimensional (3D) dense phenotyping promises quantification of the complete CMF shape compared to the limiting use of sparse landmarks in classical phenotyping. This study assesses the accuracy and reliability of this new approach on the human mandible. Classic and automatic phenotyping techniques were applied on 30 unaltered and 20 operated human mandibles. Seven observers indicated 26 anatomical landmarks on each mandible three times. All mandibles were subjected to three rounds of automatic phenotyping using Meshmonk. The toolbox performed non-rigid surface registration of a template mandibular mesh consisting of 17,415 quasi landmarks on each target mandible and the quasi landmarks corresponding to the 26 anatomical locations of interest were identified. Repeated-measures reliability was assessed using root mean square (RMS) distances of repeated landmark indications to their centroid. Automatic phenotyping showed very low RMS distances confirming excellent repeated-measures reliability. The average Euclidean distance between manual and corresponding automatic landmarks was 1.40 mm for the unaltered and 1.76 mm for the operated sample. Centroid sizes from the automatic and manual shape configurations were highly similar with intraclass correlation coefficients (ICC) of > 0.99. Reproducibility coefficients for centroid size were 0.90 indicating again high similarity between shapes quantified by classic or automatic phenotyping. Combined, these findings established high accuracy and repeated-measures reliability of the automatic approach. 3D dense CMF phenotyping of the human mandible using the Meshmonk toolbox introduces a novel improvement in quantifying CMF shape. Automatic craniomaxillofacial (CMF) three dimensional (3D) dense phenotyping promises quantification of the complete CMF shape compared to the limiting use of sparse landmarks in classical phenotyping. This study assesses the accuracy and reliability of this new approach on the human mandible. Classic and automatic phenotyping techniques were applied on 30 unaltered and 20 operated human mandibles. Seven observers indicated 26 anatomical landmarks on each mandible three times. All mandibles were subjected to three rounds of automatic phenotyping using Meshmonk. The toolbox performed non-rigid surface registration of a template mandibular mesh consisting of 17,415 quasi landmarks on each target mandible and the quasi landmarks corresponding to the 26 anatomical locations of interest were identified. Repeated-measures reliability was assessed using root mean square (RMS) distances of repeated landmark indications to their centroid. Automatic phenotyping showed very low RMS distances confirming excellent repeated-measures reliability. The average Euclidean distance between manual and corresponding automatic landmarks was 1.40 mm for the unaltered and 1.76 mm for the operated sample. Centroid sizes from the automatic and manual shape configurations were highly similar with intraclass correlation coefficients (ICC) of > 0.99. Reproducibility coefficients for centroid size were 0.90 indicating again high similarity between shapes quantified by classic or automatic phenotyping. Combined, these findings established high accuracy and repeated-measures reliability of the automatic approach. 3D dense CMF phenotyping of the human mandible using the Meshmonk toolbox introduces a novel improvement in quantifying CMF shape. ispartof: Scientific Reports vol:11 issue:1 ispartof: location:England status: published

AIM: To evaluate dimensional changes in the alveolar ridge and bone structure after tooth extraction when L-PRF or A-PRF+ was used in comparison to unassisted socket healing. MATERIALS AND METHODS: Twenty patients in need of at least three tooth extractions in the aesthetic zone were included. L-PRF, A-PRF+ or control was randomly assigned, leaving one empty socket/edentulous site between conditions. CBCT scans were obtained immediately after tooth extraction and after 3 months of healing. Horizontal and vertical dimensional changes of the ridge and socket fill were calculated. Histological and micro-CT analysis of bone biopsies were used to evaluate post-surgical bone structural healing. RESULTS: Mean horizontal and vertical changes at 1-mm below the crest (buccal and palatal side) were similar for the three sites (p > 0.05). For the socket fill, L-PRF (85.2%) and A-PRF+ (83.8%) showed superior values than the control (67.9%). The histological and radiological analysis reported more newly formed bone for the PRF groups, without any significant differences between both. CONCLUSIONS: PRF matrices failed to reduce the dimensional changes after multiple tooth extractions in the premaxilla. After 3-month healing, both PRF matrices showed radiographically a significant superiority for the socket fill. Histologically, they seemed to accelerate new bone formation. ispartof: JOURNAL OF CLINICAL PERIODONTOLOGY vol:48 issue:7 pages:984-995 ispartof: location:United States status: published

This study investigated the feasibility of a 3D black-blood STIR TSE sequence with a pseudo steady-state sweep and motion-sensitized driven equilibrium pulse for extraforaminal cranial nerve imaging on a 3T system. Assessments of healthy volunteers showed near-perfect agreement in nerve visualization with excellent to good visualization of the extraforaminal trigeminal, greater occipital, and facial nerves. Suppression of surrounding tissues was excellent to good. 3D cranial nerve imaging can produce nerve selective imaging of extraforaminal cranial and spinal nerve branches. ispartof: AMERICAN JOURNAL OF NEURORADIOLOGY vol:42 issue:3 pages:578-580 ispartof: location:United States status: published