Search

Reducing the number of AND gates in logic networks benefits the applications in cryptography, security, and quantum computing. This work proposes a don’t-care-based (DC-based) approach to reduce the number of AND gates further in the well-optimized network. Furthermore, this work also proposes an enhanced synthesis flow by integrating our approach with the state-of-the-art. The experimental results show that our approach can further reduce up to 25% of the number of AND gates in the network. For the experiments about the enhanced synthesis flow, we achieve a speedup of almost $10\times $ on average for the cryptography benchmarks while having competitive results as compared to the flow in the state-of-the-art. [ABSTRACT FROM AUTHOR]

Threshold logic has been attracting great attention from researchers due to the rapid development in nanotechnology-based devices. In the state-of-the-art approach to the threshold logic network (TLN) synthesis using don’t cares, we observed that not all the computed don’t cares contribute to the cost minimization of threshold logic gate (TLG). Therefore, in this work, we focus on computing the don’t cares that effectively provide the opportunities for cost minimization. Furthermore, De Morgan’s law for TLGs is applied such that global TLN optimization considering the cost and the number of inverters can be achieved. The experimental results show that the proposed approach is capable of obtaining efficiently a smaller cost and fewer inverters for a set of TLN benchmarks. [ABSTRACT FROM AUTHOR]

Quantum-dot cellular automata (QCA) is considered as a promising emerging technology due to its low power dissipation and high device density. Since the majority function is the main operation in QCA circuits, minimizing the number of majority gates in QCA circuits is crucial to the corresponding QCA circuit minimization. A previous work used the node-merging technique to replace one target node with an existing substitute node in majority circuits for optimization. However, this technique may fail when no substitute nodes exist for a target node. In this article, we propose an enhanced optimization technique for majority circuits by adding a new node into the circuits and removing the target node and its fanin nodes. The experimental results show that this technique improves the results of the node-merging technique on a set of EPFL logic synthesis benchmarks. Additionally, this enhanced technique can work together with other optimization techniques. The circuit size reduction in the integrated approach reaches 1.26 times as compared to the results using the node-merging technique. [ABSTRACT FROM AUTHOR]

LOOPLock is the state-of-the-art cyclic logic locking method in hardware security. LOOPLock is able to invalidate SAT Attack, Removal Attack, and CycSAT simultaneously by introducing two types of cycle pairs in a circuit. In this work, we analyze LOOPLock’s locking mechanism and propose an attacking approach based on locking structure analysis. Furthermore, to defend the new attack, we propose LOOPLock 2.0, which strengthens the original cyclic logic locking method—LOOPLock. Experimental results show the efficiency and effectiveness of the proposed attacking approach to LOOPLock and the high defense capability of LOOPLock 2.0. [ABSTRACT FROM AUTHOR]

This article proposes a new necessary condition and the corresponding speedup strategies to the threshold function (TF) identification problem. The state-of-the-art to this identification problem could be very time-consuming when the function-under-identification is a non-TF with the unateness property. The proposed new necessary condition can be seamlessly integrated into this identification algorithm. As compared with the state-of-the-art, the improved identification algorithm with the proposed necessary condition can more effectively and efficiently detect non-TFs. Furthermore, according to the experimental results, the ratio of CPU time overhead in the process of checking the proposed necessary condition for identifying all the 8-input TF is only 0.1%. [ABSTRACT FROM AUTHOR]

SAT Attack, CycSAT, and Removal Attack have demonstrated their abilities to break most existing logic locking methods. In this article, we propose a new cyclic logic locking method to invalidate these attacks simultaneously. Our main intention is to create noncombinational cycles to lock a circuit. Specifically, the noncombinational behavior in the noncombinational cycles that is unobservable at the primary outputs (POs) needs to be preserved when the correct key-vector is fed to resist CycSAT, and the noncombinational behavior in the noncombinational cycles affecting POs needs to be preserved when the incorrect key-vector is fed to invalidate SAT Attack. Furthermore, some nodes will be removed when applying our locking method, which is able to defend Removal Attack. The experimental results show the effectiveness and low area overhead of the proposed method. [ABSTRACT FROM AUTHOR]

The identification of threshold function (TF), which determines whether a Boolean function can be represented by an linear threshold logic gate (LTG) or not, is a fundamental but important task in the theories of threshold logic. In this paper, we propose a more efficient and effective algorithm of TF identification by constructing the system of irredundant inequalities and adjusting the weight assignment comprehensively. This is the first non-ILP-based approach that is able to identify all the eight-input TFs. The experimental results demonstrated that the proposed approach is more effective than all the existing non-ILP-based approaches and the LTGs obtained by the proposed approach are optimal for near 100% cases. For TFs with 9–15 inputs, the proposed approach can identify 100 000 randomly generated TFs as well in a reasonable CPU time. [ABSTRACT FROM AUTHOR]

Memristor, which is a two-terminal nanodevice, widely used in various fields, e.g., machine learning and neuromorphic systems, has attracted much attention these years. Memristor can also be used to realize an implication logic gate and thus logic circuits. However, the fanouts in a memristor-based logic circuit have some constraints and need to be processed with special care. On the other hand, in addition to the number of memristors, the number of operational pulses is another metric to measure the quality of a memristor-based logic circuit. Hence, in this paper, we propose a synthesis algorithm to deal with the fanout problems in memristor-based logic circuits using implication logic gates for having a minimal number of operational pulses. We conducted experiments on a set of MCNC benchmarks. The experimental results show that the proposed algorithm can reduce 29% operational pulses and 36% memristor count on average compared with the state-of-the-art. [ABSTRACT FROM AUTHOR]

Single-electron transistor (SET) at room temperature has been demonstrated as a promising device for extending Moore’s law due to its ultralow-power consumption. Previous works proposed mapping approaches to implement Boolean functions on SET arrays. However, these approaches were based on an ideal assumption that the SET arrays are defect-free. Recently, a diagnosis method was proposed targeting at defective SET arrays. However, the approach was static, such that the performance is inefficient. As a result, in this paper, we propose a dynamic diagnosis approach that can efficiently identify the locations and the types of the defects in the SET arrays. The experimental results show that the proposed dynamic diagnosis approach can achieve the same results as the previous work with much less CPU time on a set of benchmarks. Furthermore, the proposed method spent a few seconds while the previous work exceeded the CPU time limit of 3600 s on some benchmarks. [ABSTRACT FROM PUBLISHER]

Single-electron transistor (SET) at room temperature has been demonstrated as a promising device for extending Moore’s law due to its ultralow power consumption. However, early realizations of SET array lacked variability and reliability due to their fixed architectures and high defect rates of nanowire segments. Therefore, a reconfigurable version of SET was proposed to deal with these issues. Recently, several automated mapping approaches have been proposed for area minimization of reconfigurable SET arrays. However, to the best of our knowledge, seldom mapping algorithms that consider the existence of defective nanowire segments were proposed. Furthermore, before the defect-aware mapping, we have to know the locations of defects in SET arrays. Thus, this paper presents the first diagnosis approach to identify the locations of defects in SET arrays followed by two defect-aware algorithms for mapping SET arrays in different scenarios. The experimental results show that the proposed diagnosis method can detect 100% of defects under a defect rate and distribution in SET arrays. As for the mapping algorithms, the results show that our approach can successfully map the SET arrays with 11.13% and 7.69% width overhead on average in the baseline detour mapping algorithm and defect-reuse mapping algorithm, respectively, in the presence of 5000-ppm defects. [ABSTRACT FROM AUTHOR]

Power consumption has become one of the primary challenges to meetMoore’s law. For reducing power consumption, single-electron transistor (SET) at room temperature has been demonstrated as a promising device for extending Moore’s law due to its ultralow power consumption in operation. Previous works have proposed automated mapping approaches for SET arrays that focused on minimizing the number of hexagons in the SET arrays. However, the area of an SET array is the product of the bounded height and the bounded width, and the height usually equals the number of inputs in the Boolean function. Consequently, in this paper, we focus on the width minimization to reduce the overall area in the mapping of the SET arrays. Our approach consists of techniques of product term minimization, branch-then-share (BTS)-aware variable reordering, SET array architecture relaxation, and BTS-aware product term reordering. The experimental results on a set of MCNC and IWLS 2005 benchmarks show that the proposed approach saves 45% of width compared with the work by Chiang et al., which focused on hexagon count minimization, and also saves 13% of width compared with the work by Chen et al., which focused on width minimization. [ABSTRACT FROM AUTHOR]

Traditionally, we expect that circuit designs can be executed without errors. However, for error resilient applications such as image processing, 100% correctness is not necessary. By pursuing less than 100% correctness, power consumption can be significantly reduced. Recently, probabilistic CMOS and probabilistic Boolean circuits (PBCs) have been proposed to deal with power consumption issue. However, to the best of our knowledge, no correctness analysis and power optimization algorithms have been proposed for PBCs. Thus, in this paper, we first propose a statistical approach for evaluating the correctness of PBCs. Then, we propose strategies for power optimization of PBCs. Finally, we integrate these strategies with the correctness analysis as a power optimization algorithm for PBCs. The experimental results show that the proposed correctness analysis method is highly efficient and accurate, and that the power optimization algorithm saves 36% of total power-delay-product on average under a correctness constraint of 90% on a set of International Workshop on Logic and Synthesis (IWLS) 2005 benchmarks. [ABSTRACT FROM PUBLISHER]

Recently, single-electron transistors (SETs) have been attracting substantial attention and are considered candidate devices for future integrated circuits due to their ultralow power consumption. To realize SETs, a binary decision diagram-based SET array is proposed as a suitable candidate for implementing Boolean circuits. Then, some works started developing computer-aided design techniques for this new architecture. However, most of them focused on the development of mapping techniques. How to verify the mapping results is still an open problem. Thus, in this paper, we address this problem and develop a satisfiability (SAT)-based verification method. We propose a transformation approach to model the functionality of a mapped SET array as a conjunctive normal form formula. Then, the problem that whether the SET array is functionally equivalent to its specification circuit can be solved with a SAT solver. The experimental results show that the proposed method can successfully verify correct and incorrect SET array implementations with reasonable verification time. [ABSTRACT FROM PUBLISHER]

This paper presents a logic restructuring technique named node addition and removal (NAR). It works by adding a node into a circuit to replace an existing node and then removing the replaced node. Previous node-merging techniques focus on replacing one node with an existing node in a circuit, but fail to replace a node that has no substitute node. To enhance the node-merging techniques on logic restructuring and optimization, we propose an NAR approach in this paper. We first present two sufficient conditions that state the requirements of added nodes for safely replacing a target node. Then, an NAR approach is proposed to quickly detect the added nodes by performing logic implications based on these conditions. We apply the NAR approach to circuit minimization together with two techniques: redundancy removal and mandatory assignment reuse. We also apply it to satisfiability (SAT)-based bounded sequential equivalence checking (BSEC) to reduce the computation complexity of SAT solving. The experimental results show that our approach can enhance our prior automatic test pattern generation-based node-merging approach. Additionally, our approach has a competitive capability of circuit minimization with 44 times speedup compared to a SAT-based node-merging approach. For BSEC, our approach can work together with other optimization technique to save a total of approximately 39-h verification time for all the benchmarks. [ABSTRACT FROM AUTHOR]