Search

Lipid droplets (LDs) are subcellular organelles that are dynamic and play a central role in energy homeostasis and lipid metabolism. They also contribute to the transport and maturation of cellular proteins and are closely associated with several diseases. The important role of the cellular microenvironment in maintaining cellular homeostasis. Changes in cell polarity, particularly in organelles, have been found to be strongly linked to inflammation, Alzheimer's disease, cancer, and other illnesses. It is essential to check the polarity of the LDs. A series of arylated naphthalimide derivatives were synthesized using the Suzuki reaction. Modification of synthesized aryl naphthalimides using oligomeric PEG based on intramolecular charge transfer (ICT) mechanism. A series of fluorescent probes were designed to target LDs and detect their polarity. Nap-TPA-PEG 3 probe exhibited high sensitivity to polarity. The addition of oligomeric polyethylene glycol (PEG) to the probe not only significantly improved its solubility in water, but also effectively reduced its cytotoxicity. In addition, the probe exhibited excellent aggregation-induced luminescence (AIE) properties and solvent discolouration effects. Nap-TPA-PEG 3 probe exhibited high Pearson correlation coefficient (0.957163) in lipid droplet co-localization in cells. Nap-TPA-PEG 3 could be used as an effective hand tool to monitor cell polarity., (© 2024 Wiley-VCH GmbH.)

Here, π-Extended BTD derivatives were successfully synthesized by Heck coupling reaction, which exhibited the the advantages of simplicity and efficiency, wild substrate scope, easily available substrates and high yield. The fluorescent probe PEG-BTDAr targeting LDs was successfully prepared by the nucleophilic substitution reaction between the Heck coupling reaction product 3 h and Amino polyethylene glycol monomethyl ether (Mn=2000). PEG-BTDAr exhibited the advantages of high selectivity, good stability and pH resistance. The use of PEG as a substrate gave PEG-BTDAr good biocompatibility. It was worth mentioning that PEG-BTDAr could not only track LDs in cells under different physiological conditions, but also distinguish between living and dead cells in biological systems., (© 2023 Wiley-VCH GmbH.)

Fluorescent nanoprobe with good water dispersibility was synthesized by the coupling of fluorescent 1,8-naphthalimide dye (NANI) as well as biocompatible poly (ethylene glycol) (PEG) to cellulose nanocrystals (CNC). FTIR, TGA and XPS analysis confirmed the successful covalent conjugation of NANI and PEG. The rod-like morphology of CNC was generally retained after two-step successive grafting of NANI and PEG. The contact angle and transmittance measurements showed that the grafted PEG brushes improve the hydrophilicity of fluorescent CNC probes and their dispersibility in high-concentration NaCl solutions. The fluorescent CNC probe had good biocompatibility and was successfully used for the bioimaging of Hela cells in physiological environment at high salt concentration. Laser confocal microscopy showed that the fluorescent CNC probe can penetrate the cell membrane and disperse uniformly in the cell with good biocompatibility. The fluorescent CNC probe with nanometer size, strong fluorescence emission and high salt-tolerance possess potential application in biomedical field., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

In order to develop a biomass-based superplasticizer, kraft lignin (KL) was grafted with isopentenol polyoxyethylene ether (TPEG) to prepare a novel macromonomer (KL-TPEG). It was shown that the retention ratio of the aliphatic CC bond increased from 81.07% to 90.20% with the increase of m(TPEG)/m(KL). When the grafting ratio was increased, the average number of TPEG grafted on one KL molecule was approximately 1.4, 3.1, 4.6, 6.2 and 7.6. The star-like structure was also confirmed by FT-IR, 1 H NMR and GPC. KL-TPEG had favorable surface activity and dispersion stability on the cement particles. It was illustrated that the shear stress and shear viscosity of the cement slurries with KL-TPEG were significantly less than that of blank slurry. The dispersion-retention ability of KL-TPEG on the slurry was also gradually enhanced with the increase of the grafting ratio of TPEG. It was seldom reported on the biomass-based TPEG. Through modified with KL, the rheology behavior and the dispersion-retention ability of TPEG was greatly improved, and the cost of TPEG was also reduced, thus this study not only promoted the development of biomass-based macromonomer, but also helped for the high value utilization of lignin., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Three-dimensional (3D) porous scaffolds made of biopolymers have attracted significant attention in tissue engineering applications. In this study, cellulose-nanofibers/polyethylene glycol diacrylate (CNFs/PEGDA) mixture, a novelty 3D material, was prepared by physical mixing the CNFs with a waterborne photopolymerizable acrylic resin (PEGDA). Then the CNFs/PEGDA mixture was used to fabricate 3D cytocompatibility CNFs/PEGDA hydrogel scaffold by stereolithograph（SLA）process. The CNFs/PEGDA hydrogels were shaped by SLA, and then the aerogel scaffolds were prepared by the freeze-drying of hydrogels. The results showed that the CNFs/PEGDA mixtures with different CNFs contents are all transparent, homogeneous and with obvious shear-thinning property. The SLA fabricated CNFs/PEGDA aerogel scaffolds possess high and tunable compressive modulus and high porosity of approximately 90%. It is found that CNFs in the composite scaffolds played a significant role in structural shape integrity, porous structure and mechanical strength. In addition, the NIH 3T3 cells tightly adhere on the CNFs/PEGDA materials and spread on the scaffolds with good differentiation and viability. These results have revealed a superior method to prepare tissue engineering scaffolds which possesses suitable mechanical strength and biocompatibility for 3D cell cultivation.

Au nanoparticles (NPs) have important applications in bioimaging, clinical diagnosis and even therapy due to its water-solubility, easy modification and drug-loaded capability, however, easy aggregation of Au NPs in normal saline and serum greatly limits its applications. In this work, highly stabilized core-satellite Au nanoassemblies (CSAuNAs) were constructed by a hierarchical DNA-directed self-assembly strategy, in which satellite Au NPs number could be effectively tuned through varying the ratios of core-AuNPs-ssDNA and satellite-AuNPs-ssDNAc. It was especially interesting that PEG-functionalized CSAuNAs (PEG-CSAuNAs) could not only bear saline solution but also resist the enzymatic degradation in fetal calf serum. Moreover, cell targeting and imaging indicated that the PEG-CSAuNAs had promising biotargeting and bioimaging capability. Finally, fluorescence imaging in vivo revealed that PEG-CSAuNAs modified with N-acetylation chitosan (CSNA) could be selectively accumulate in the kidneys with satisfactory renal retention capability. Therefore, the highly stabilized PEG-CSAuNAs open a new avenue for its applications in vivo.

Poor delivery of insoluble anticancer drugs has so far precluded their clinical application. In this study, an efficient tumor targeted-nanoparticle delivery system, transferrin-eight-arm-polyethylene glycol-dihydroartemisinin nanoparticles (TF-8arm-PEG-DHA NPs) for the vehiculation of dihydroartemisinin (DHA) was first prepared and evaluated for its targeting efficiency and cytotoxicity in vitro and in vivo to Lewis lung carcinoma (LLC) cells, which overexpress transferrin receptors (TFRs). The synthesized TF-8arm-PEG-DHA NPs had high solubility (~102 fold of free DHA), relatively high drug loading (~10 wt% DHA), long circulating half-life and moderate particle size (~147 nm). The in vitro cytotoxicity and in vivo tumor growth inhibition studies in LLC-tumor bearing mice confirmed the enhanced efficacy of TF-modified 8arm-PEG-DHA NPs compared to free DHA and non-modified 8arm-PEG-DHA NPs. All these results together supported that the formulation developed in this work exhibited great potential as an effective tumor targeting delivery system for insoluble anticancer drugs.

Effect of the molecular structure of lignin-based polyoxyethylene ether (EHL-PEG) on enzymatic hydrolysis of Avicel and corn stover was investigated. With the increase of PEG contents and molecular weight of EHL-PEG, glucose yield of corn stover increased. EHL-PEG enhanced enzymatic hydrolysis of corn stover significantly at buffer pH 4.8-5.5. Glucose yield of corn stover at 20% solid content increased from 32.8% to 63.8% by adding EHL-PEG, while that with PEG4600 was 54.2%. Effect of EHL-PEG on enzymatic hydrolysis kinetics of cellulose film was studied by quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). An enhancing mechanism of EHL-PEG on enzymatic hydrolysis kinetics of cellulose was proposed. Cellulase aggregates dispersed by EHL-PEG excavated extensive cavities into the surface of cellulose film, making the film become more loose and exposed. After the maximum enzymatic hydrolysis rate, the film was mainly peeled off layer by layer until equilibrium., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

In this work, the adsorption of polyethylene glycol (PEG) onto cellulose nano-crystals (CNC) was investigated for preparing re-dispersible dried CNC. Results showed that the re-dispersity of CNC in water can be significantly enhanced using a PEG1000 dosage of 5wt% (based on the dry weight of CNC). The elemental analysis confirmed the adsorption of PEG onto the CNC surface. Transmission electron microscopy (TEM) was used to characterize the dry powder and indicated that the irreversible agglomeration of CNC after drying was essentially eliminated based on the PEG adsorption concept. Thermo-gravimetric analysis (TGA) and X-ray diffraction (XRD) suggested that CNC crystallinity and thermal stability were not affected by the adsorption of PEG. Thus, the adsorption of PEG has great potential for producing re-dispersible powder CNC., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Water-soluble lignin-based polyoxyethylene ether (EHL-PEG), prepared from enzymatic hydrolysis lignin (EHL) and polyethylene glycol (PEG1000), was used to improve enzymatic hydrolysis efficiency of corn stover. The glucose yield of corn stover at 72h was increased from 16.7% to 70.1% by EHL-PEG, while increase in yield with PEG4600 alone was 52.3%. With the increase of lignin content, EHL-PEG improved enzymatic hydrolysis of microcrystalline cellulose more obvious than PEG4600. EHL-PEG could reduce at least 88% of the adsorption of cellulase on the lignin film measured by quartz crystal microbalance with dissipation monitoring (QCM-D), while reduction with PEG4600 was 43%. Cellulase aggregated at 1220nm in acetate buffer analyzed by dynamic light scattering. EHL-PEG dispersed cellulase aggregates and formed smaller aggregates with cellulase, thereby, reduced significantly nonproductive adsorption of cellulase on lignin and enhanced enzymatic hydrolysis of lignocelluloses., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

In this study, we examined the possibility of preparing stable soy protein nanogels by simply heating homogeneous soy protein dispersion. The protein nanogels formed were characterized by z-average hydrodynamic diameter, polydispersity index, turbidity, ζ-potential, morphology, and their stability to pH and ionic strength change. Soy protein dispersion (1% w/v) was homogeneous around pH 5.9 where it had the lowest polydispersity index (∼0.1). Stable and spherical nanogels were formed by heating soy protein dispersion at pH 5.9 under 95 °C. They sustained constantly low polydispersity index (∼0.1) in the investigated pH range of 6.06-7.0 and 2.6-3.0. The nanogels were pH-sensitive and would swell with pH change. They were stable at 0-200 mM NaCl concentration. Denaturation of soy glycinin was the prerequisite for the formation of stable nanogels. Soy protein nanogels had a core-shell structure with basic polypeptides and β subunits interacting together as the hydrophobic core; and acid polypeptides, α', and α subunits locating outside the core as hydrophilic shell. The inner structure of soy protein nanogels was mainly stabilized by disulfide bonds cross-linked network and hydrophobic interaction. Soy protein nanogels made in this study would be useful as functional ingredients in biotechnological, pharmaceutical, and food industries.

Polysaccharide nanocrystals with a rodlike shape but with different dimensions and specific surface area were prepared from cotton and capim dourado cellulose, and with a plateletlike morphology from waxy maize starch granules. The rheological behavior of aqueous solutions of poly(ethylene oxide) (PEO) with different molecular weights when adding these nanoparticles was investigated evidencing specific interactions between PEO chains and nanocrystals. Because PEO also bears hydrophobic moieties, it was employed as a compatibilizing agent for the melt processing of polymer nanocomposites. The freeze-dried mixtures were used to prepare nanocomposite materials with a low density polyethylene matrix by extrusion. The thermal and mechanical behavior of ensuing nanocomposites was studied.

The presence of lignin impairs the utilization of the hemicelluloses dissolved in the pre-hydrolysis liquor (PHL) of the kraft-based dissolving pulp production process. In this paper, a novel process was developed by combining the acidification and poly ethylene oxide (PEO) flocculation concepts to improve the lignin removal. The results showed that the lignin removal was improved by the addition of PEO to the acidified PHL, particularly at a low pH of 1.5. The main mechanisms involved are the lignin/PEO complex formation and the bridging of the formed complexes. This hypothesis was supported by the turbidity, FTIR and particle size measurements. Interestingly, the hemicelluloses removal from the acidification/PEO flocculation was marginal, which would be beneficial for the down-stream ethanol production from the PHL. Additionally, a process flow diagram was proposed that incorporates this new concept into the existing configuration of kraft-based dissolving pulp production process., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Nanocomposites were developed by cross-linking cellulose nanowhiskers with poly(methyl vinyl ether-co-maleic acid) and polyethylene glycol. Nuclear magnetic resonance (NMR) studies showed cross-linking occurs between the matrix and cellulose nanowhiskers via an esterification reaction. Proton NMR T(2) relaxation experiments provided information on the mobility of the polymer chains within the matrix, which can be related to the structure of the cross-linked nanocomposite. The nanocomposite was found to consist of mobile chain portions between cross-linked junction points and immobilized chain segments near or at those junction points, whose relative fraction increased upon further incorporation of cellulose nanowhiskers. Atomic force microscopy images showed a homogeneous dispersion of nanowhiskers in the matrix even at high nanowhisker content, which can be attributed to cross-linking of the nanowhiskers in the matrix. Relative humidity conditions were found to affect the mechanical properties of the composites negatively while the nanowhiskers content had a positive effect. It is expected that the cross-links between the matrix and the cellulose nanowhiskers trap the nanowhiskers in the cross-linked network, preventing nanowhisker aggregation subsequently producing cellulose nanocomposites with unique mechanical behaviors. The results show that in situ cross-linking of cellulose nanowhiskers with a matrix polymer is a promising route to obtain nanocomposites with well dispersed nanowhiskers, tailored nanostructure, and mechanical performance.

Poly(ethylene oxide) (PEO) is used in papermaking, water purification and mineral flotation as a flocculating agent. Despite the fact that PEO does not adsorb on cellulose and bleached lignin, and only poorly on calcium carbonate, it can nevertheless be used to deposit colloidal pigments on pulp fibers. PEO by itself is inefficient, but it can be made to work in combination with another compound, usually referred to as a cofactor or an enhancer. The cofactor associates with PEO and the association complex acts as an efficient bridging agent. There are two classes of cofactor: those who cause PEO to cluster and those that do not. In general PEO association-clusters are more efficient flocculating agents than non-clustered PEO. The PEO dissolution procedure has an important effect on the PEO flocculation efficiency. Before reaching thermodynamic equilibrium, PEO is in an entangled state. Cofactors that cluster PEO are likely to maintain PEO in an entangled state and, like the association-clusters, these entanglements are more efficient flocculation agents than well-dispersed PEO. Salt also affects the PEO-cofactor association. For most cofactors, salt is needed to induce the association. Calcium ions can act as bridging agents between association complexes, especially those containing carboxyl groups, thus promoting the formation of association-clusters.

Coupling anticancer drugs to synthetic polymers is a promising approach of enhancing the antitumor efficacy and reducing the side-effects of these agents. Doxorubicin maleimide derivatives containing an amide or acid-sensitive hydrazone linker were therefore coupled to alpha-methoxy-poly(ethylene glycol)-thiopropionic acid amide (MW 20000 Da), alpha,omega-bis-thiopropionic acid amide poly(ethylene glycol) (MW 20000 Da) or alpha-tert-butoxy-poly(ethylene glycol)-thiopropionic acid amide (MW 70000 Da) and the resulting polyethylene glycol (PEG) conjugates isolated through size-exclusion chromatography. The polymer drug derivatives were designed as to release doxorubicin inside the tumor cell by acid-cleavage of the hydrazone bond after uptake of the conjugate by endocytosis. The acid-sensitive PEG conjugates containing the carboxylic hydrazone bonds exhibited in vitro activity against human BXF T24 bladder carcinoma and LXFL 529L lung cancer cells with IC70 values in the range 0.02-1.5 microm (cell culture assay: propidium iodide fluorescence or colony forming assay). In contrast, PEG doxorubicin conjugates containing an amide bond between the drug and the polymer showed no in vitro activity. Fluorescence microscopy studies in LXFL 529 lung cancer cells revealed that free doxorubicin accumulates in the cell nucleus whereas doxorubicin of the acid-sensitive PEG doxorubicin conjugates is primarily localized in the cytoplasm. Nevertheless, the acid-sensitive PEG doxorubicin conjugates retain their ability to bind to calf thymus DNA as shown by fluorescence and visible spectroscopy studies. Results regarding the effect of an acid-sensitive PEG conjugate of molecular weight 20000 in the chorioallantoic membrane (CAM) assay indicate that this conjugate is significantly less embryotoxic than free doxorubicin although antiangiogenic effects were not observed.