Search

Three new uranyl borates, K(UO2)(BO3) (1), Rb(UO2)(BO3) (2) and Cs(UO2)(BO3) (3) have been prepared using B2O3 fluxes at 1000 ºC. 1 and 3 can also be synthesized using potassium tetraborate tetrahydrate as a molten flux at 290 ºC, which provides a new low temperature route to prepare actinide borates. 1 possesses an a-uranophane anion sheet topology identical to that in the previously reported compounds Li(UO2)(BO3) and Na(UO2)(BO3). 2 and 3 display a new [UO5]1∞ anion topology with a basic building block of edge-sharing dimers comprised of (UO7)2 polyhedra. The A(UO2)(BO3) (A ¼ alkali metal) series shows a systematic structural evolution, which will be discussed in the main text. [ABSTRACT FROM AUTHOR]

Two‐electron oxidative addition is one of the most important elementary reactions for d‐block transition metals but it is uncommon for f‐block elements. Here, we report the first examples of intermolecular oxidative addition of E−H (E=C, N) bonds to uranium(II) centers. The transient U(II) species was formed in‐situ by reducing a heterometallic cluster featuring U(IV)‐Pd(0) bonds with potassium‐graphite (KC8). Oxidative addition of C−H or N−H bonds to the U(II) centers was observed when this transient U(II) species was treated with benzene, carbazole or 1‐adamantylamine, respectively. The U(II) centers could also react with tetracene, biphenylene or N2O, leading to the formation of arene reduced U(IV) products and uranyl(VI) species via two‐ or four‐electron processes. This study demonstrates that the intermolecular two‐electron oxidative addition reactions are viable for actinide elements. [ABSTRACT FROM AUTHOR]

In conjunction with theoretical calculations, the in vitro and in vivo uranyl binding capabilities of a bidentate picolinate (Pic) ligand and its pentadentate derivative (H2dpa) are investigated. The planar N3O2-donor configuration of H2dpa matches the typical pentagonal-bipyramid coordination geometry of uranyl, demonstrating a remarkable removal preference for uranyl in the kidneys. [ABSTRACT FROM AUTHOR]

The crystal structures of compounds (III), (IV), (VI) and (VII) are determined by single crystal XRD. [ABSTRACT FROM AUTHOR]

Although examples of multiple bonds between actinide elements and main‐group elements are quite common, studies of the multiple bonds between actinide elements and transition metals are extremely rare owing to difficulties associated with their synthesis. Here we report the first example of molecular uranium complexes featuring a cis‐[M→→ ${{\rm{ \mathbin{{\stackrel{\textstyle\rightarrow} { {\smash{\rightarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M] core (M=Rh, Ir), which exhibits an unprecedented arrangement of two M→→ ${{\rm{ \mathbin{{\stackrel{\textstyle\rightarrow} { {\smash{\rightarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ U double dative bond linkages to a single U center. These complexes were prepared by the reactions of chlorine‐bridged heterometallic complexes [{U{N(CH3)(CH2CH2NPiPr2)2}(Cl)2[(μ‐Cl)M(COD)]2}] (M=Rh, Ir) with MeMgBr or MeLi, a new method for the construction of species with U−M multiple bonds. Theoretical calculations including dispersion confirmed the presence of two U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M double dative bonds in these complexes. This study not only enriches the U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M multiple bond chemistry, but also provides a new opportunity to explore the bonding of actinide elements. [ABSTRACT FROM AUTHOR]

Although examples of multiple bonds between actinide elements and main‐group elements are quite common, studies of the multiple bonds between actinide elements and transition metals are extremely rare owing to difficulties associated with their synthesis. Here we report the first example of molecular uranium complexes featuring a cis‐[M→→ ${{\rm{ \mathbin{{\stackrel{\textstyle\rightarrow} { {\smash{\rightarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M] core (M=Rh, Ir), which exhibits an unprecedented arrangement of two M→→ ${{\rm{ \mathbin{{\stackrel{\textstyle\rightarrow} { {\smash{\rightarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ U double dative bond linkages to a single U center. These complexes were prepared by the reactions of chlorine‐bridged heterometallic complexes [{U{N(CH3)(CH2CH2NPiPr2)2}(Cl)2[(μ‐Cl)M(COD)]2}] (M=Rh, Ir) with MeMgBr or MeLi, a new method for the construction of species with U−M multiple bonds. Theoretical calculations including dispersion confirmed the presence of two U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M double dative bonds in these complexes. This study not only enriches the U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M multiple bond chemistry, but also provides a new opportunity to explore the bonding of actinide elements. [ABSTRACT FROM AUTHOR]

The Haber–Bosch process produces ammonia (NH3) from dinitrogen (N2) and dihydrogen (H2), but requires high temperature and pressure. Before iron-based catalysts were exploited in the current industrial Haber–Bosch process, uranium-based materials served as effective catalysts for production of NH3 from N2. Although some molecular uranium complexes are known to be capable of combining with N2, further hydrogenation with H2 forming NH3 has not been reported to date. Here, we describe the first example of N2 cleavage and hydrogenation with H2 to NH3 with a molecular uranium complex. The N2 cleavage product contains three uranium centers that are bridged by three imido μ 2-NH ligands and one nitrido μ 3-N ligand. Labeling experiments with 15N demonstrate that the nitrido ligand in the product originates from N2. Reaction of the N2-cleaved complex with H2 or H+ forms NH3 under mild conditions. A synthetic cycle has been established by the reaction of the N2-cleaved complex with trimethylsilyl chloride. The isolation of this trinuclear imido-nitrido product implies that a multi-metallic uranium assembly plays an important role in the activation of N2. [ABSTRACT FROM AUTHOR]

Rb2 [(UO2)2B8O12F6] ·H2B4O7 is synthesized from mixtures of UO2(NO3)2, H3BO3, RbBF4, and H2O (autoclave, 220 °C, 5 d). [ABSTRACT FROM AUTHOR]

A rare case of semiconducting actinide-based metal–organic framework SCU-125 was designed and synthesized. As a result of the lack of two coordination sites in the plane of the tetrathiafulvalene tetrabenzoate (TTFTB) molecule, a defective kgd network was formed. The electrical conductivity of SCU-125 was measured to be 2.2(2) × 10−7 S cm−1 at 25 °C ± 2 °C. [ABSTRACT FROM AUTHOR]

Comprehensive Summary: The environmental contamination of uranium will occur in scenarios such as nuclear accidents and leakage from nuclear waste storage sites, which eventually leads to the internal uranium exposure of people, causing consequential injuries of renal failure, osteosarcoma, etc. The development of uranyl specific chelating agents that could sequester uranium in vivo is in urgent need and is important for the safe and efficient development of nuclear industry. Metal organic frameworks (MOFs) already serve as efficient uranium depletion materials in solutions of a wide range of pH and ionic strength for nuclear fuel recycling, uranium extraction from seawater, as well as environmental decontamination. Herein, a chromium‐based nano‐metal organic framework (nano‐MOF) functionalized interiorly with 3,2‐HOPO ligands, MIL‐101‐HOPO, is rationally synthesized. In vitro adsorption experiments show that MIL‐101‐HOPO exhibits high adsorption selectivity and fast adsorption kinetics for uranyl. The results of in vivo uranyl decorporation assays reveal that MIL‐101‐HOPO with the decoration of HOPO ligands on the interior wall exhibits significantly increased uranyl removal ratio in kidneys comparing to the pristine nMOFs, and is more effective than the clinically used ZnNa3‐DTPA. All those results corroborate the interior functionalization of MOFs as an efficient strategy to develop promising uranyl decorporation agents. [ABSTRACT FROM AUTHOR]

[Display omitted] • A novel Zr(IV)-based MOF with high-density free carboxylic groups was constructed. • The MOF demonstrates high stability and excellent uranium removal performance. • Dynamic sorption tests highlight its potential for treating radioactive wastewater. • The mechanism for its excellent ability to adsorb U(VI) was investigated. The extraction of uranium from aqueous environments, including the ocean and radioactive wastewater, represents a significant challenge with profound implications for energy resources and environmental remediation. This work presents the design and synthesis of a novel highly stable carboxylated metal–organic framework, BUT-12-3COOH, which achieves excellent U(VI) extraction ability from water. BUT-12-3COOH features high-density free carboxylic groups, exceptional chemical stability, fast kinetics, and high adsorption capacity for U(VI). Dynamic sorption experiments further demonstrated the potential of BUT-12-3COOH in treating real radioactive wastewater. The mechanisms for the U(VI) capture of BUT-12-3COOH are investigated through the combination of EDS, FT-IR, and XPS analysis. The results of this study underscore the promising utility of BUT-12-3COOH as an effective sorbent for extracting radionuclides from environmental specimens and liquid nuclear waste streams. [ABSTRACT FROM AUTHOR]

Low‐valent uranium‐element multiple bond complexes remain scarce, though there is burgeoning interest regarding to their bonding and reactivity. Herein, isolation of a uranium(III)‐carbon double bond complex [(Cp*)2U(CDP)](BPh4) (1) comprising a tridentate carbodiphosphorane (CDP) was reported for the first time. Oxidation of 1 afforded the corresponding U(IV) complex [(Cp*)2U(CDP)](BPh4)2 (2). The distance between U and C in 2 is 2.481 Å, indicating the existence of a typical U=C double bond, which is further confirmed by quantum chemical calculations. Bonding analysis suggested that the CDP also serves as both σ‐ and π‐donor in complex 1, though a longer U−C bond (2.666(3) Å) is observed. It implies that 1 is the first isolable mononuclear uranium(III) carbene complex. Moreover, these results suggest that CDPs are promising ligands to establish other low‐valent f‐block metal‐carbon multiple bond complexes. [ABSTRACT FROM AUTHOR]

We disclose the intrinsic semiconducting properties of one of the largest mixed‐valent uranium clusters, [H3O+][UV(UVIO2)8(μ3‐O)6(PhCOO)2(Py(CH2O)2)4(DMF)4] (Ph=phenyl, Py=pyridyl, DMF=N,N‐dimethylformamide) (1). Single‐crystal X‐ray crystallography demonstrates that UV center is stabilized within a tetraoxo core surrounded by eight uranyl(VI) pentagonal bipyramidal centers. The oxidation states of uranium are substantiated by spectroscopic data and magnetic susceptibility measurement. Electronic spectroscopy and theory corroborate that UV species serve as electron donors and thus facilitate 1 being a n‐type semiconductor. With the largest effective atomic number among all reported radiation‐detection semiconductor materials, charge transport properties and photoconductivity were investigated under X‐ray excitation for 1: a large on‐off ratio of 500 and considerable charge mobility lifetime product of 2.3×10−4 cm2 V−1, as well as a high detection sensitivity of 23.4 μC Gyair−1 cm−2. [ABSTRACT FROM AUTHOR]

We disclose the intrinsic semiconducting properties of one of the largest mixed‐valent uranium clusters, [H3O+][UV(UVIO2)8(μ3‐O)6(PhCOO)2(Py(CH2O)2)4(DMF)4] (Ph=phenyl, Py=pyridyl, DMF=N,N‐dimethylformamide) (1). Single‐crystal X‐ray crystallography demonstrates that UV center is stabilized within a tetraoxo core surrounded by eight uranyl(VI) pentagonal bipyramidal centers. The oxidation states of uranium are substantiated by spectroscopic data and magnetic susceptibility measurement. Electronic spectroscopy and theory corroborate that UV species serve as electron donors and thus facilitate 1 being a n‐type semiconductor. With the largest effective atomic number among all reported radiation‐detection semiconductor materials, charge transport properties and photoconductivity were investigated under X‐ray excitation for 1: a large on‐off ratio of 500 and considerable charge mobility lifetime product of 2.3×10−4 cm2 V−1, as well as a high detection sensitivity of 23.4 μC Gyair−1 cm−2. [ABSTRACT FROM AUTHOR]

Activation of dinitrogen (N2, 78 %) and dioxygen (O2, 21 %) has fascinated chemists and biochemists for decades. The industrial conversion of N2 into ammonia requires extremely high temperatures and pressures. Herein we report the first example of N2 and O2 cleavage by a uranium complex, [N(CH2CH2NPiPr2)3U]2(TMEDA), under ambient conditions without an external reducing agent. The N2 triple bond breaking implies a UIII–PIII six‐electron reduction. The hydrolysis of the N2 reduction product allows the formation of ammonia or nitrogen‐containing organic compounds. The interaction between UIII and PIII in this molecule allows an eight‐electron reduction of two O2 molecules. This study establishes that the combination of uranium and a low‐valent nonmetal is a promising strategy to achieve a full N2 and O2 cleavage under ambient conditions, which may aid the design of new systems for small molecules activation. [ABSTRACT FROM AUTHOR]

Activation of dinitrogen (N2, 78 %) and dioxygen (O2, 21 %) has fascinated chemists and biochemists for decades. The industrial conversion of N2 into ammonia requires extremely high temperatures and pressures. Herein we report the first example of N2 and O2 cleavage by a uranium complex, [N(CH2CH2NPiPr2)3U]2(TMEDA), under ambient conditions without an external reducing agent. The N2 triple bond breaking implies a UIII–PIII six‐electron reduction. The hydrolysis of the N2 reduction product allows the formation of ammonia or nitrogen‐containing organic compounds. The interaction between UIII and PIII in this molecule allows an eight‐electron reduction of two O2 molecules. This study establishes that the combination of uranium and a low‐valent nonmetal is a promising strategy to achieve a full N2 and O2 cleavage under ambient conditions, which may aid the design of new systems for small molecules activation. [ABSTRACT FROM AUTHOR]

Two new uranylzinc germanates, (UO2)4(ZnO)(Ge2O7)2·(H3O)4 (UZG‐1) and (UO2)3[Zn(H2O)3](GeO4)2 (UZG‐2), have been prepared and characterized. Both compounds are constructed from anionic uranyl germanate open‐frameworks embedded with Zn2+ cations in the voids via rather unusual 3d‐5f heterometallic cation‐cation interactions. [ABSTRACT FROM AUTHOR]

Scintillators are a unique class of luminescent materials with specific applications towards radiation detection. The emitters within state‐of‐the‐art scintillators are mostly limited to bismuth, cerium, europium, thallium, lead, tungsten, etc. A shared feature of these elements is the relatively high atomic number, which is responsible for high radiation stopping power and radiation‐induced luminescence. Searching for new scintillating materials is an essential target aiming at specific applications. In this Concept article, we will discuss our recent works on the topic of "uranyl‐bearing scintillators". As a virgin territory in this field, uranyl‐bearing scintillators show intrinsic merits for designing new materials with X‐ray detection capability, that is, the large photoelectric cross‐section, high X‐ray attenuation efficiency, and high crystal density. In addition, we also present challenges in the further development of the uranyl‐bearing scintillators. [ABSTRACT FROM AUTHOR]

A systematic investigation of uranyl borates under different synthetic conditions resulted in five new 2D compounds, namely, (H3O)[(UO2)(BO3)], Li[(UO2)(BO3)]·(H2O), α‐K4[(UO2)5(BO3)2O4], β‐K4[(UO2)5(BO3)2O4] and K2.5[(UO2)5(BO3)2O2.5(OH)1.5]·(H2O)2.5. (H3O)[(UO2)(BO3)] and Li[(UO2)(BO3)]·(H2O) were obtained from hydrothermal reactions at 220 °C using the same mineralizer. Both materials possess the uranophane sheet topology with different symmetry of the unit cells. In the structure of (H3O)[(UO2)(BO3)] and Li[(UO2)(BO3)]·(H2O), UO7 pentagonal bipyramids share edges and vertexes with four BO3 planar triangles. α‐K4[(UO2)5(BO3)2O4] and β‐K4[(UO2)5(BO3)2O4] are polytypes. α‐K4[(UO2)5(BO3)2O4] was synthesized from a high‐temperature solid‐state reaction under ambient pressure; whereas β‐K4[(UO2)5(BO3)2O4] was obtained from a high‐temperature/high‐pressure (HT/HP) reaction. Both structures have an identical anion topology, but β‐K4[(UO2)5(BO3)2O4] crystallizes in space group with higher symmetry. In K2.5[(UO2)5(BO3)2O2.5(OH)1.5]·(H2O)2.5, which was obtained from a hydrothermal reaction, UO7 polyhedra share vertexes and edges with two independent BO3 triangles, forming the most complex uranyl borate layers among all five compounds. The different synthetic routes, novel topologies, thermal behavior and Raman spectra are discussed. [ABSTRACT FROM AUTHOR]

The design and synthesis of uranium sorbent materials with high uptake efficiency, capacity and selectivity, as well as excellent hydrolytic stability and radiation resistance remains a challenge. Herein, a polyoxometalate (POM)–organic framework material (SCU‐19) with a rare inclined polycatenation structure was designed, synthesized through a solvothermal method, and tested for uranium separation. Under dark conditions, SCU‐19 can efficiently capture uranium through ligand complexation using its exposed oxo atoms and partial chemical reduction from UVI to UIV by the low‐valent Mo atoms in the POM. An additional UVI photocatalytic reduction mechanism can occur under visible light irradiation, leading to a higher uranium removal without saturation and faster sorption kinetics. SCU‐19 is the only uranium sorbent material with three distinct sorption mechanisms, as further demonstrated by X‐ray photoelectron spectroscopy (XPS) and X‐ray absorption near edge structure (XANES) analysis. [ABSTRACT FROM AUTHOR]

The design and synthesis of uranium sorbent materials with high uptake efficiency, capacity and selectivity, as well as excellent hydrolytic stability and radiation resistance remains a challenge. Herein, a polyoxometalate (POM)–organic framework material (SCU‐19) with a rare inclined polycatenation structure was designed, synthesized through a solvothermal method, and tested for uranium separation. Under dark conditions, SCU‐19 can efficiently capture uranium through ligand complexation using its exposed oxo atoms and partial chemical reduction from UVI to UIV by the low‐valent Mo atoms in the POM. An additional UVI photocatalytic reduction mechanism can occur under visible light irradiation, leading to a higher uranium removal without saturation and faster sorption kinetics. SCU‐19 is the only uranium sorbent material with three distinct sorption mechanisms, as further demonstrated by X‐ray photoelectron spectroscopy (XPS) and X‐ray absorption near edge structure (XANES) analysis. [ABSTRACT FROM AUTHOR]

The design and synthesis of uranium sorbent materials with high uptake efficiency, capacity and selectivity, as well as excellent hydrolytic stability and radiation resistance remains a challenge. Herein, a polyoxometalate (POM)–organic framework material (SCU‐19) with a rare inclined polycatenation structure was designed, synthesized through a solvothermal method, and tested for uranium separation. Under dark conditions, SCU‐19 can efficiently capture uranium through ligand complexation using its exposed oxo atoms and partial chemical reduction from UVI to UIV by the low‐valent Mo atoms in the POM. An additional UVI photocatalytic reduction mechanism can occur under visible light irradiation, leading to a higher uranium removal without saturation and faster sorption kinetics. SCU‐19 is the only uranium sorbent material with three distinct sorption mechanisms, as further demonstrated by X‐ray photoelectron spectroscopy (XPS) and X‐ray absorption near edge structure (XANES) analysis. [ABSTRACT FROM AUTHOR]

• New uranyl uptake strategy with combined complexation and photoreduction is shown. • An ultrahigh uranyl uptake capacity not limited by the sorption site is achieved. • Uranyl can be removed completely regardless of its initial concentration. • Uranyl extraction is not affected by the coexisting metal cations. Uranium enrichment is perhaps the most critical chemical process throughout the nuclear fuel cycle including uranium mining, uranium extraction from seawater, used fuel reprocessing and disposal, and environmental contamination remediation. New uranium extraction technology is still highly desirable at current stage, although a variety of extraction methods have been established and developed in the past several decades but all with clear demerits. Herein we present a new uranium extraction strategy with combined ligand complexation and photocatalytic reduction based on postsynthetically functionalized metal-organic frameworks (MOFs). The highly robust and photoactive MOF PCN-222 is modified with phosphono- and amino groups that can capture U(VI) from solution. Upon visible light irradiation, the photo-induced electrons from the MOF host can efficiently reduce U(VI) pre-enriched in MOF, affording neutral uranium species that evacuate the MOF structure and regenerating the active site readily for capturing additional U(VI). This auto-recycled process offers an ultrahigh uranium extraction capacity not limited by the number of adsorption sites and more importantly an extra uranium uptake selectivity over these non-redox-active competing metal cations, and can be utilized for uranium separation over extremely wide uranium concentrations and pH ranges, showing a powerful application potential. [ABSTRACT FROM AUTHOR]

Deferiprone (3-hydroxy-1,2-dimethyl-4(1H)-pyridone, DFP), which is a drug clinically used for removing heavy metals in vivo, was explored for its removal efficiency towards uranium. The reaction of uranyl nitrate hexahydrate with DFP at room temperature yielded the compound [(UO2)(H2O)(C7NO2H8)2]·4H2O (1), which crystallizes from a mixed solution of methanol and water (pH = 7.0). X-ray diffraction shows that the stable complexation of uranyl occurs from the coordination of two bidentate DFP ligands perpendicular to the O=U=O unit with a fifth coordinating oxygen atom coming from one water molecule, resulting in a pentagonal bipyramidal geometry. The formation constants of uranyl and DFP complexes were measured and the species distribution diagram illustrates that UO2L2 (94.6%) is the dominant uranyl-DFP complex in 0.1 M KCl solution at physiological pH = 7.4. The results from both crystallographic and potentiometric studies imply that the metal : ligand ratio is 1 : 2. The effectiveness of using DFP to remove uranium was examined at the cellular level, and the results suggest that it can significantly reduce the cellular uptake and increase the cellular release of U(vi) in renal proximal tubular epithelial cells (NRK-52E). [ABSTRACT FROM AUTHOR]

Abstract: The combination of high atomic number and high oxidation state in UVI materials gives rise to both high X‐ray attenuation efficiency and intense green luminescence originating from ligand‐to‐metal charge transfer. These two features suggest that UVI materials might act as superior X‐ray scintillators, but this postulate has remained substantially untested. Now the first observation of intense X‐ray scintillation in a uranyl–organic framework (SCU‐9) that is observable by the naked eye is reported. Combining the advantage in minimizing the non‐radiative relaxation during the X‐ray excitation process over those of inorganic salts of uranium, SCU‐9 exhibits a very efficient X‐ray to green light luminescence conversion. The luminescence intensity shows an essentially linear correlation with the received X‐ray intensity, and is comparable with that of commercially available CsI:Tl. SCU‐9 possesses an improved X‐ray attenuation efficiency (E>20 keV) as well as enhanced radiation resistance and decreased hygroscopy compared to CsI:Tl. [ABSTRACT FROM AUTHOR]

Abstract: The combination of high atomic number and high oxidation state in UVI materials gives rise to both high X‐ray attenuation efficiency and intense green luminescence originating from ligand‐to‐metal charge transfer. These two features suggest that UVI materials might act as superior X‐ray scintillators, but this postulate has remained substantially untested. Now the first observation of intense X‐ray scintillation in a uranyl–organic framework (SCU‐9) that is observable by the naked eye is reported. Combining the advantage in minimizing the non‐radiative relaxation during the X‐ray excitation process over those of inorganic salts of uranium, SCU‐9 exhibits a very efficient X‐ray to green light luminescence conversion. The luminescence intensity shows an essentially linear correlation with the received X‐ray intensity, and is comparable with that of commercially available CsI:Tl. SCU‐9 possesses an improved X‐ray attenuation efficiency (E>20 keV) as well as enhanced radiation resistance and decreased hygroscopy compared to CsI:Tl. [ABSTRACT FROM AUTHOR]

In this study, the inorganic-organic hybrid of PA/TNTs was synthesized and characterized by using multiple analysis techniques. Batch experiments were conducted to investigate the removal performance of PA/TNTs towards U(VI). The sorption kinetics procedure achieved equilibrium within 6 h. The maximum sorption capacity at 293 K and pH 5.0 was calculated to be 1.16 × 10 −3 mol/g. In addition, the PA/TNTs composite showed a higher sorption selectivity towards U(VI) over many other metal ions. The ionic strength experiments, desorption results, X-ray diffraction (XRD), solid fluorescence, extended X-ray adsorption fine structure (EXAFS) and Fourier transform infrared spectroscopy (FTIR) analysis suggested the predominant sorption mechanism was inner-sphere complexation rather than ion exchange or precipitation. Overall, the synthesized PA/TNTs composite could be utilized as a cost-effective material for the removal of U(VI) from wastewater. [ABSTRACT FROM AUTHOR]

[Display omitted] • A three-step uranium oxide reduction recovery process has been developed. • The uranium recovered by this process achieved a purity of over 99.9% • The overall recovery rate of uranium reached 98.6%. • Heavy metal concentrations in wastewater meet WHO guidelines by this process. Resource utilization of uranium from the nuclear wastewater is of significance, and the facile strategy to recover high purity uranium oxide directly from wastewater is urgent to develop. Herein, a three-step uranium oxide reduction recovery process (URRP), that is integrated solid–liquid separation (SLS) and electrochemical purification (EP) together with solid-phase uranium re-recovery (SUR), is designed and applied for uranium reduction and purification. The SEM and ICP results were used to determine the carbonate system as the optimal separation system and the Ti electrode as the optimal electrochemical purification electrode. The single electron transfer process of uranyl ions in carbonate was established using cyclic voltammetry. Such three-step recovery process achieves a high-efficient recovery of uranium with a purity of over 99.9% in complex wastewater systems, and an improved return rate of uranium as high as 98.6%. Furthermore, the concentration of metal ions in wastewater is reduced to the standard set by the World Health Organization. Such a URRP offers a very promising solution for the treatment of wastewater and the recovery of high purity uranium. [ABSTRACT FROM AUTHOR]

Precise detection of low-dose X- and γ-radiations remains a challenge and is particularly important for studying biological effects under low-dose ionizing radiation, safety control in medical radiation treatment, survey of environmental radiation background, and monitoring cosmic radiations. We report here a photoluminescent uranium organic framework, whose photoluminescence intensity can be accurately correlated with the exposure dose of X- or γ-radiations. This allows for precise and instant detection of ionizing radiations down to the level of 10−4 Gy, representing a significant improvement on the detection limit of approximately two orders of magnitude, compared to other chemical dosimeters reported up to now. The electron paramagnetic resonance analysis suggests that with the exposure to radiations, the carbonyl double bonds break affording oxo-radicals that can be stabilized within the conjugated uranium oxalate-carboxylate sheet. This gives rise to a substantially enhanced equatorial bonding of the uranyl(VI) ions as elucidated by the single-crystal structure of the γ-ray irradiated material, and subsequently leads to a very effective photoluminescence quenching through phonon-assisted relaxation. The quenched sample can be easily recovered by heating, enabling recycled detection for multiple runs. [ABSTRACT FROM AUTHOR]

This study highlights the simultaneous sequestration of U(VI) and arsenate at the goethite/water interface. The uptake trends and speciation of these two components were related with molar arsenate/U(VI) ratio, solution pH, contact order and aging time. A metastable [UO(HAsO)·HO] was observed after 3 days and then this solid completely transformed into Na(UOAsO)·3HO after 7 days. The disodium ethylenediamine tetraacetate ligand gave rise to the complete dissolution of Na(UOAsO)·3HO phase and the release of U(VI) and arsenate back into the solution. The experimental findings facilitated us better comprehend the migration and fate of coexisting U(VI) and arsenate in the aquatic environment. [ABSTRACT FROM AUTHOR]

Uranium (U(VI)) pollution comes from the development and utilization of natural minerals. Based on a new concept of ecological restoration of uranium pollution into natural minerals, a new artificial mineralized process was proposed to immobilize uranium (U(VI)) for wastewater decontamination. In this work, three systems of Mg 3 (PO 4) 2 + UO 2 2+, Mg2+ + PO 4 3− + UO 2 2+ and Mg2+ + PO 4 3− + Mg 3 (PO 4) 2 + UO 2 2+ were designed. Batch experiments and theoretical calculation were conducted to study the U(VI) immobilization effectiveness and artificial mineralization mechanisms. U(VI) removal efficiencies reached up to 96% in the pH value of 5.0 in the three systems. Both precipitation and surface adsorption contributed to favorable U(VI) removal in Mg 3 (PO 4) 2 + UO 2 2+, but resulting in U desorption. Precipitation of Mg2+, PO 4 3− and UO 2 2+ into saleeite (Mg(UO 2) 2 (PO 4) 2 ·10H 2 O) crystal contributed to UO 2 2+ immobilization in the Mg2+ + PO 4 3− + UO 2 2+ and Mg2+ + PO 4 3− + Mg 3 (PO 4) 2 + UO 2 2+ systems, resulting in the negligible U desorption. It is due to the crystallization of the Mg(UO 2) 2 (PO 4) 2 ·10H 2 O through precipitation of Mg2+ and PO 4 3− with UO 2 2+ in acidic medium. PHREEQC and Visual MINTEQ fitting confirmed the favorable precipitation of Mg2+ and PO 4 3− with UO 2 2+ into saleeite in acidic medium. Thus, the U(VI) immobilization effectiveness and artificial mineralization mechanism were understood, providing a promising strategy of artificial induced mineralization of Mg(UO 2) 2 (PO 4) 2 ·10H 2 O for U(VI) decontamination in wastewater. [Display omitted] • Artificially mineralization is proposed for immobilizing uranium. • Formation of Saleéite and chernikovite is the fate of uranium immobilization. • Theorical fitting confirmed the mineralization of dissolved Mg2+ and PO 4 3− with UO 2 2+. • The leaching rate of saleéite and chernikovites is negligible. • P/U and Mg/U molar ratios determined the artificially mineralization process. [ABSTRACT FROM AUTHOR]

[Display omitted] • Ni-Co LDO could be obtained by calcination of Ni-Co LDH. • The morphology of the Ni-Co LDO can be adjusted by the calcination temperature. • The Ni-Co LDO-500 prefer removing uranium to Ni-Co LDH. • Electrostatic attraction, surface complexation and memory effect contributed to U(VI) recovery. • Ni-Co LDO-500 showed good stability and excellent regeneration ability. The utilization and development of nuclear energy has resulted in the discharge of uranium-containing wastewater. Layer double hydroxides (LDHs) and oxides (LDOs) were reported for efficient extracting U(VI) from wastewater. In this work, nickel–cobalt layered double oxide (Ni-Co LDO-X, X represents the calcination temperature) with excellent electrostatic attraction and complexation was synthesized via calcination of nickel–cobalt layered double hydroxide (Ni-Co LDH) under air atmosphere for extracting U(VI) comparing to Ni-Co LDH. Scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and zeta potential analysis were conducted to characterize the Ni-Co LDO-X. Batch adsorption experiments were carried out to investigate the U(VI) extraction properties. The U(VI) adsorption capacity on Ni-Co LDO-500 increased over 3 times compared to that of Ni-Co LDH. The process of uranium removed by Ni-Co LDO-500 conforms to the Langmuir model, the calculated maximum adsorption capacity is 707.91 mg/g. The results suggested that the excellent U(VI) adsorption ability on Ni-Co LDO-500 mainly dominated by the memory effect, electrostatic interaction, and complexation on the outer-sphere surface. Ni-Co LDO-500 has excellent regeneration ability in five adsorption/desorption experiments. The Ni-Co LDO-500 had favorable ability in removing uranium in actual wastewater with the residual concentration being lower than 0.05 mg/L. The above results highlight that the Ni-Co LDO-500 is promising to be used for the decontamination of uranium in actual uranium-containing wastewater. [ABSTRACT FROM AUTHOR]

Uranium (U) immobilization from wastewater by zero valent iron (ZVI) was widely concerned through reduction and surface adsorption. Releasing of U due to re-oxidation of U(IV) into U(VI) limited the application of ZVI in U decontamination. In this work, a kind of biochar supported nano zero valent iron (Fe/BC(900)) was obtained by carbothermal reduction of starch mixed with ferric nitrate at 900 °C. U immobilization behavior by Fe/BC(900) in the presence of phosphate (P) was investigated. The U immobilization reaction was adjusted by controlling the sequence of U, Fe/BC(900) and P. U immobilization efficiency was enhanced to 99.9% in the presence of P. Reaction sequence of U, Fe/BC(900) and P influenced the U immobilization efficiency, which followed the order of (U-P)+Fe/BC(900)>(U- Fe/BC(900))+P>U+Fe/BC(900)>(P-Fe/BC(900))+U. P and nZVI both contributed to enhancing U immobilization through precipitation of uranyl-P and reductive co-precipitate (U(IV)) in a wide pH range. The released Fe ions could precipitate with uranyl and phosphate. Consumption of P and nZVI in the (P-Fe/BC(900))+U system limited U immobilization ability. The precipitate is highly dependent on U, P and Fe elements. U desorption in (U-P)+Fe/BC(900) system was not observed with stability. [Display omitted] • Enhanced immobilization of uranium by Fe/BC(900) in the presence of phosphate. • Reaction sequence of uranium, phosphate and Fe/BC(900) determined the uranium immobilization. • Consumption of nZVI by phosphate limited uranium immobilization. • Co-immobilization of uranium and phosphate on Fe/BC(900). • Uranium immobilization with neglected desorption in the presence of phosphate. [ABSTRACT FROM AUTHOR]

Uranium (U) immobilization from wastewater by zero valent iron (ZVI) was widely concerned through reduction and surface adsorption. Releasing of U due to re-oxidation of U(IV) into U(VI) limited the application of ZVI in U decontamination. In this work, a kind of biochar supported nano zero valent iron (Fe/BC(900)) was obtained by carbothermal reduction of starch mixed with ferric nitrate at 900 °C. U immobilization behavior by Fe/BC(900) in the presence of phosphate (P) was investigated. The U immobilization reaction was adjusted by controlling the sequence of U, Fe/BC(900) and P. U immobilization efficiency was enhanced to 99.9% in the presence of P. Reaction sequence of U, Fe/BC(900) and P influenced the U immobilization efficiency, which followed the order of (U-P)+Fe/BC(900)>(U- Fe/BC(900))+P>U+Fe/BC(900)>(P-Fe/BC(900))+U. P and nZVI both contributed to enhancing U immobilization through precipitation of uranyl-P and reductive co-precipitate (U(IV)) in a wide pH range. The released Fe ions could precipitate with uranyl and phosphate. Consumption of P and nZVI in the (P-Fe/BC(900))+U system limited U immobilization ability. The precipitate is highly dependent on U, P and Fe elements. U desorption in (U-P)+Fe/BC(900) system was not observed with stability. [Display omitted] • Enhanced immobilization of uranium by Fe/BC(900) in the presence of phosphate. • Reaction sequence of uranium, phosphate and Fe/BC(900) determined the uranium immobilization. • Consumption of nZVI by phosphate limited uranium immobilization. • Co-immobilization of uranium and phosphate on Fe/BC(900). • Uranium immobilization with neglected desorption in the presence of phosphate. [ABSTRACT FROM AUTHOR]

With the wide application of nuclear energy and the rapid development of mining, a great quantity of uranium (U(VI)) containing wastewater is inevitably generated. In this work, a facile environmental-friendly coprecipitation method was proposed for the green synthesis of binary layered double hydroxides (Ni–Co LDH W -7), which could be used to efficiently adsorb U(VI) from wastewater. Pseudo-second-order kinetic model and Dubinin-Radushkevich model fitted well with the adsorption of U(VI) on Ni–Co LDH W -7, the maximum adsorption capacity of U(VI) on Ni–Co LDH W -7 was 201.09 mg/g calculated by the Langmuir model. Adsorption equilibrium reached after 30 min, which is a spontaneous and endothermic process. Fourier Transform Infrared Spectrometer (FTIR) and X-ray Photoelectron Spectroscopy (XPS) measurements manifested that the favorable U(VI) extraction on Ni–Co LDH W -7 is mainly ascribed to inner-layer surface electrostatic interaction and complexation, which is dominated by abundant oxygen-containing M-OH and interlayer OH− ions. Briefly, this work provides a facial and environmental-friendly Ni–Co LDH W -7 for removing U(VI) in actual uranium-containing wastewater. [Display omitted] • A facile environmental-friendly coprecipitation method was proposed for green synthesis of Ni–Co LDH W -7. • Adsorption capacity of uranium reached 201.09 mg/g calculated by Langmuir model at pH = 6 and 298 K. • Metal hydroxyl group configuration and the hydroxyl groups contributed to U(VI) binding on Ni–Co LDH W -7. • Ni–Co LDH W -7 showed good stability. [ABSTRACT FROM AUTHOR]

Keywords: luminescence; radiation detection; scintillators; uranium As a new area in this field, uranyl-bearing scintillators show intrinsic merits for designing new materials with X-ray detection capability, that is, a large photoelectric cross-section, high X-ray attenuation efficiency, and high crystal density. Luminescence, radiation detection, scintillators, uranium. [Extracted from the article]

α-Ba2[UO2(PO4)2] (I) and β-Ba2[UO2(PO4)2] (II) are prepared by H3BO3/B2O3 flux reactions using stoichiometric amounts of BaCO3, BPO4, and UO2(NO3)2 (Pt crucible, 1. [ABSTRACT FROM AUTHOR]