Search

In this study, the efficient recovery of high-quality short-chain fatty acids from wine vinasse and waste activated sludge mixtures was investigated. The highest accumulation of short-chain fatty acids reached 3502 mg chemical oxygen demand per litre with a proportion of 82.5% acetic and propionic acids in the reactor with a wine vinasse/waste activated sludge mixture under optimized fermentation conditions, while merely 236 and 618 mg chemical oxygen demand per litre was accumulated in the reactors with waste activated sludge and wine vinasse systems alone, respectively. The mechanisms of the exceptional short-chain fatty acids promotion were mainly attributed to the simultaneous increase of bioavailable substrates and the fermentative community. The general microbial activity, key enzymes responsible for short-chain fatty acids generation, and diversity and abundance of fermentative bacteria were all enhanced under optimum conditions, which resulted in the rapid hydrolysis and acidification of bioavailable substrates for short-chain fatty acids generation. Moreover, the dewaterability of fermentation residues was also enhanced due to the presence of wine vinasses as skeleton builders.

Metabolic uncouplers are widely used for the in-situ reduction of excess sludge from activated sludge systems. However, the interaction mechanism between the metabolic uncouplers and extracellular polymeric substances (EPS) of activated sludge is unknown yet. In this study, the interactions between a typical metabolic uncoupler, o-chlorophenol (oCP), and the EPS extracted from activated sludge were explored using a suite of spectral methods. The binding constants calculated for the four peaks of three-dimensional excitation-emission matrix fluorescence were in a range of 1.24–1.76 × 103 L/mol, implying that the tyrosine protein-like substances governed the oCP-EPS interactions. Furthermore, the results of Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and 1H nuclear magnetic resonance indicated that the carboxyl, carbonyl, amine, and hydroxyl groups of EPS were the main functional groups involved in the formation of the oCP-EPS complex. The results of this study are useful for understanding the interactions between metabolic uncouplers and the EPS of activated sludge as well as their fates in biological wastewater treatment systems.

The biodegradation of benz[α]anthracene (BaA), which was a high-molecule-weight PAH, was enhanced via a combination of alkaline and alkyl polyglucosides (APG) treatment during waste activated sludge (WAS) anaerobic fermentation. The biodegradation efficiency of BaA was increased from 14.1% in the control to 30.2 and 47.8% in pH 10 and pH 10 & APG reactors, respectively. Mechanism investigations found that the alkaline and APG treatments stimulated the processes of BaA desorption from sludge and transfer/entry into microorganisms, and ultimately improved the BaA bioavailability. Meanwhile, the huge released substrates from WAS not only served as carbon sources but also involved in the electron transfer among microorganisms which contributed to the BaA biodegradation process. Moreover, the microbial activities involved in BaA biodegradation, including the abundances of functional bacteria, activities of enzymes and quantities of genes, were also incremented due to the alkaline and APG treatments. Overall, the simultaneous improvement of BaA bioavailability and microbial activities enhanced its biodegradation efficiency.

Large quantities of antibiotics are manufactured, used, and eventually discharged into alga-containing water environment as prototypes, by-products, or transformation products. Different activities of Chlamydomonas reinhardtii toward cefradine (CFD) were studied, and the results indicated that CFD is resistant (removal rate of 5.45–14.72%) in simulated natural water environment. Cefradine was mainly removed by hydrolysis, adsorption, desorption, photodecarboxylation, and photoisomerization. The effects of C. reinhardtii density, initial solution pH, and different light sources on CFD removal efficiency were investigated. The optimum conditions occurred at a density of algae 10 × 104 cells/mL, a solution pH of 9.0, and the ultraviolet (UV) light. Additionally, the removal kinetics under 16 different conditions was explored. The results showed that the removal of CFD fits well with a pseudo-first-order kinetic, and the half-life times are from 0.8 to 261.6 days. This study summarizes the CFD removal mechanisms in alga-containing water environment, highlights the important role played by light irradiation in eliminating CFD, and obtains the important kinetic data on CFD removal.

Constructed wetland-microbial fuel cell (CW-MFC) is a novel technology for wastewater treatment with electrical generation. This work proposed a Fe-C micro-electrolysis substrate (Fe-C) with biomass modified ceramsite to enhance pollutants removal and electricity generation. The key influencing factors were revealed, and the COD, NH

Sediment microbial communities play critical roles in the health of fish and the biogeochemical cycling of elements in aquaculture ecosystems. However, the response of microbial communities to temporal and spatial variations in interconnected aquaculture pond and ditch systems remains unclear. In this study, 61 sediment bacterial samples were collected over one year from 11 sites (including five ponds and six ditches) in a 30-year-old fish aquaculture farm. The 16S rRNA approach was used to determine the relative abundances of microbial communities in the sediment samples. The relationships among nutrients, heavy metals, and abundant microorganisms were analyzed. Our results showed that Proteobacteria, Bacteroides and Chloroflexi were the predominant phyla in the sediments of aquaculture pond, with average abundances of 36.33%, 18.60%, and 14.58%, respectively. The microbial diversity in aquaculture sediments was negatively correlated (P 0.05) with the concentrations of total nitrogen and total phosphorus in sediments, indicating that the microbial diversity is highly associated with the remediation of nutrients in sediments. The sediment samples with high similarities were discovered by the t-distributed stochastic neighbor embedding (t-SNE) method. The site-specific correlations between specific microorganisms and heavy metals were explored. The network analysis revealed that the microbial diversities in aquaculture ponds were more stable than that in aquaculture ditches. The network analysis also illustrated that the microbial genera with low relative abundances may become key groups of microbial communities in sediment ecosystems. Our work deepens the understanding of the relationships between microbial communities and the spatiotemporal characteristics of surface water and sediments in aquaculture farms.

The N-Acy-L-homoserine lactones (AHLs) mediated quorum sensing (QS) system exhibited important ecological significance in bacterial biofilm formation. However, the previous studies mainly focused on indigenous AHLs while the role of exogenous AHLs has remained unclear. This study evaluated the roles of exogenous AHLs on the biofilm formation of Pseudomonas aeruginosa. Both the C6-HSL and C8-HSL promoted the biofilm formation of P. aeruginosa with an enhancement of 2.47 and 1.88 times, respectively. Further analysis showed that exogenous AHLs contributed greatly to the adhesive ability instead of growth rate. Also, the bacterial motility and metabolic activities were significantly improved by AHLs. Moreover, the microbial functional genes (i.e. lasI, lasR, rhlI and rhlR) involved in regulating the biofilm formation were highly expressed in AHLs reactors. These findings expanded the knowledge of AHLs functions in mediating biofilm formation, and provided insightful guidance on the biofilm regulation in the wastewater treatment via biofilm technology.

As a frequently used product with antimicrobial activity, consumed allicin might be discharged and concentrated in waste-activated sludge (WAS). However, the influence of allicin (as an exogenous pollutant) on WAS fermentation has not been clearly revealed. This study aimed to disclose the impacts of allicin on volatile fatty acid (VFA) generation during WAS fermentation. The results showed that the appropriate presence of allicin (10 mg/g TSS) significantly enhanced the VFA yield (1894 versus 575 mg COD/L in the control) with increased acetate proportion (24.3%). Further exploration found that allicin promoted WAS solubilization, hydrolysis and acidification simultaneously. Metagenomic analysis revealed that the key genes involved in extracellular hydrolysis metabolism (i.e., CAZymes), membrane transport (i.e., gtsA and ytfT), substrate metabolism (i.e., yhdR and pfkC) and fatty acid synthesis (i.e., accA and accD) were all highly expressed. Allicin also induced the bacteria to produce more signalling molecules and regulate cellular functions, thereby enhancing the microbial adaptive and regulatory capacity to the unfavourable environment. Moreover, the variations in fermentative microbes and their contributions to the upregulation of functional genes (i.e., ytfR, gltL, INV, iolD and pflD) for VFA generation were disclosed. Overall, the simultaneous stimulation of functional microbial abundances and metabolic activities contributed to VFA production in allicin-conditioned reactors.

The effective removal of refractory antidepressant in wastewater is challenging. In this study, a novel strategy of cysteine-assisted Fe

The acesulfame (ACE) degradation in waste activated sludge (WAS) via direct anaerobic fermentation is difficult and the efficient elimination techniques are imperative for the ultimate safe WAS disposal. Persulfate (PS)-based approach was developed to promote the ACE removal during WAS anaerobic fermentation. Results demonstrated the effectiveness of PS-based treatments on ACE degradation, and the ACE removal efficiency was respectively 48.2% and 96.2% in the PS and PS/Fe-treated reactors while it was only 6.0% in the control reactor. Mechanism explorations revealed that the active free radicals (i.e. OH• and SO

Wastewater treatment plants (WWTPs) play an irreplaceable role in eliminating pollutants from domestic and industrial wastewater and contribute to water recycling. Nowadays, the selection of processes configuration of WWTPs mainly depends on the local wastewater treatment standards and the experience of wastewater engineers rather than an intelligent data-driven strategy. In this study, an integrated data-driven strategy consisting of t-distributed stochastic neighbor embedding (t-SNE) and deep neural networks (DNNs) is proposed for optimizing the processes configuration of full-scale WWTP predesign. A large dataset with 14,647 samples collected from 10 full-scale WWTPs with distinct treatment processes is clustered by the t-SNE method based on the influent characteristics, and four meaningful clusters (Clusters I–IV) are identified for the subsequent development of DNN classification models. All four DNN models achieve acceptable classification accuracy (>0.8975) and the maximal testing accuracy is 0.9505. The DNN models are capable of finding the optimized processes configuration of WWTPs under target scenarios. Our results highlight the strength of combining the t-SNE and the DNN models to utilize the relationships between key parameters and processes configuration of WWTPs, and help engineers predesign WWTPs with the optimal processes configuration.

Polyhydroxyalkanoates (PHA) synthesis by activated sludge using volatile fatty acids (VFAs) in fermentation liquid of excess sludge as carbon source is a hotspot in the field of environmental biotechnology. However, there is no unified conclusion on the effects of non-VFAs, mainly dissolved organic matter (DOM), on PHA production. Thus, this critical review mainly introduces the main characteristics and common analysis methods of DOM in anaerobic fermentation liquid. The effects of DOM on PHA production are analyzed from the aspects of microbiology, metabolic regulation and sludge properties. The results of different studies showed that high concentration of DOM is bad for PHA production, but an appropriate amount of DOM is conducive to the stability of sludge properties, reducing the final PHA purification cost. Finally, suitable strategies were proposed to regulate the PHA synthesis by activated sludge with DOM for PHA production by anaerobic fermentation liquid.利用活性污泥微生物将剩余污泥发酵液中的挥发性脂肪酸 (Volatile fatty acids，VFAs) 转化为聚羟基脂肪酸酯 (Polyhydroxyalkanoates，PHA) 是目前环境生物技术领域的研究热点。但针对发酵液中非VFAs物质 (主要是溶解性有机物，Dissolved organic matter，DOM) 对活性污泥合成PHA的影响目前仍未有统一的结论，需要进行较全面的分析和总结。因此，文中首先介绍了剩余污泥发酵液中DOM的主要特性及常见分析方法，然后从微生物学、代谢调控、污泥性质等角度分析了DOM中几种主要组分 (多聚糖、蛋白类物质、腐殖质) 对活性污泥合成PHA的影响。综合各研究结果表明高浓度DOM不利于PHA的生产，但适量DOM的存在有利于污泥性质的稳定，同时能降低PHA提纯成本。最后提出了相应的策略来实现对活性污泥利用DOM合成PHA的调控，以期为高效利用厌氧发酵液中DOM实现PHA合成提供解决思路。.

The enrichment of polyhydroxyalkanoates (PHA) accumulating bacteria (PAB) in mixed microbial cultures (MMC) is extremely difficult to be predicted and optimized. Here we demonstrate that mechanistic and deep learning models can be integrated innovatively to accurately predict the dynamic enrichment of PAB. Well-calibrated activated sludge models (ASM) of the PAB enrichment process provide time-dependent data under different operating conditions. Recurrent neural network (RNN) models are trained and tested based on the time-dependent dataset generated by ASM. The accurate prediction performance is achieved (R2>0.991) for three different PAB enrichment datasets by the optimized RNN model. The optimized RNN model can also predict the equilibrium concentration of PAB (R2=0.944) and corresponding time, which represents the end of the PAB enrichment process. This study demonstrates the strength of integrating mechanistic and deep learning models to predict long-term variations of specific microbes, helping to optimize their selection process for PHA production.

The effectiveness of hypochlorites (NaClO and Ca(ClO)2) on the reduction of antibiotic resistance genes (ARGs) during waste activated sludge (WAS) fermentation was determined by the quantitative PCR. NaClO and Ca(ClO)2 exhibited distinct effects on ARGs fates. Ca(ClO)2 was effective in removing all investigated ARGs, and the efficiency was highly dose-dependent. Unexpectedly, the NaClO treatment attenuated ARGs with lower efficiency and even caused the propagation of certain ARGs (i.e., aadA1 and tetQ) at higher doses. The extracellular polymeric substances dissolution and membrane integrity suggested that unstable NaClO had acute effects on bacteria initially, while it was ineffective to further attenuate ARGs released from hosts due to the rapid consumption of oxidative ClO-. Without lasting and strong oxidative stress, the microbial activities of tolerant ARGs hosts will partially recover and then contribute to the ARGs dissemination across genera. In contrast, solid-state Ca(ClO)2 was slowly released and exhibited prolonged effects on bacteria by disrupting cell membranes and removing the susceptible ARGs released from hosts. Furthermore, bacterial taxa-ARG network analysis indicated that Ca(ClO)2 reduced the abundance of potential hosts, and the metabolic pathway and gene expression related to ARGs propagation were significantly downregulated by Ca(ClO)2, which contributed to efficient ARGs attenuation.

In this study, NiFe

The effects of food wastes (FW) composition and zero-valent iron (ZVI) on the volatile fatty acids (VFAs) generation, bacterial community succession and related metabolic functions during long-term FW and waste activated sludge (WAS) co-fermentation were investigated. The VFAs production in the carbohydrate-enriched reactor was approximately 3.0-folds of that in FW reactor. The ZVI contributed to the VFAs promotion by 3.6- and 6.7-folds in carbohydrate-enriched and FW reactors, respectively. Firmicutes (20.1-74.7%), Actinobacteria (0.9-26.3%), Bacteroidetes (3.4-65.7%), and Proteobacteria (9.1-28.5%) were the main bacteria in different fermentation reactors, and they were closely associated with the fermentation substrates and ZVI. Further analysis demonstrated that the key metabolic capacity (i.e. amino acid, carbohydrate and energy metabolism) and the genetic expressions of enzymes (i.e. fabA, fabZ, accA and accB) involved in VFAs generation were also related to FW composition, and were improved by the ZVI, which accounted for the significant VFAs promotion.

Evident synergistic effects of iron activated persulfate (Fe/PS) on the marked promotion of volatile fatty acids (VFAs) from waste activated sludge during anaerobic fermentation were reported. The maximal VFAs concentration was up to 2255 mg COD/L with the proportion of 72.8% acetic acid in the Fe/PS reactor while it was merely 120 and 517 mg COD/L in Fe and PS reactors, respectively. Fe/PS treatment could substantially improve the solubilization and hydrolysis processes via the combined chemical and biologic effects to provide sufficient bioavailable substrates for acidogenic bacteria. Meanwhile, the presence of Fe in Fe/PS reactors could alleviate the adverse effects of PS on environmental factors (i.e. ORP and pH) and simultaneously involve in the regulation of microbial growth and activities. The fermentative bacteria responsible for VFAs production were highly enriched and the activities of key acid-forming enzymes and ATP concentration were greatly improved in Fe/PS reactors. It was the overall improvement of bioavailable substrates, abundance and activities of acidogenic bacteria, and fermentation conditions that led to the high VFAs accumulation in Fe/PS reactors.

In this work, we adopted the impregnating-baking method to prepare CuOx/granular activated carbon (GAC), CuOx/activated carbon fiber (ACF), and CuOx/powdery activated carbon (PAC) catalysts...

Three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectroscopy has been widely applied to detect the fluorescent components in samples from natural water bodies to wastewater treatment processes. Data interpretation methods such as parallel factor analysis (PARAFAC) are required to decompose the overlapped fluorescent signals in the 3D-EEM spectra. However, strict requirements of data and complicated procedures of the PARAFAC limit the online monitoring and analysis of samples. Here we develop a fast fluorescent identification network (FFI-Net) model based on the deep learning approach to fast predict the numbers and maps of fluorescent components by simply inputting a single 3D-EEM spectrum. Two types of convolutional neural networks (CNN) are trained to classify the numbers of fluorescent components with an accuracy of 0.956 and predict the maps of fluorescent components with the min mean absolute error of 8.9 × 10-4. We demonstrate that the accuracy of the FFI-Net model will be further improved when more 3D-EEM data are available as a training dataset. Meanwhile, a user-friendly interface is designed to facilitate practical applications. Our approach gives a robust way to overcome the shortage of the PARAFAC and provides a new platform for online analysis of the fluorescent components in water samples.

The occurrence of antibiotic resistance genes (ARGs) in waste activated sludge (WAS) fermentation was investigated with persulfate (PS)-based treatment. ARGs affiliated with multidrug (mexP), macrolide (blaOXA-129), tetracycline (tetB), sulfonamide (sul1), and vancomycin (vanRG) types were significantly decreased by PS/Fe treatment. Mechanistic investigations revealed that PS/Fe possessed oxidating potential and exhibited devastating effects on WAS fermentation. First, PS/Fe promoted cell structure damage, which facilitated ARGs release from potential hosts. A co-occurrence network analysis indicated that Fe/PS suppressed the proliferation of potential host bacteria. In addition, the PS/Fe treatment induced the decreased abundance of certain functional genes involved in pathways associated with ARGs dissemination. Finally, variation partitioning analysis demonstrated that the microbial community structure exhibited more vital effects on ARGs fates than physicochemical factors (i.e., pH and ORP) and gene expression (i.e., two-component system). This work provided a deeper understanding of the critical factors used to determine ARGs fates during WAS fermentation.

Anaerobic technology is an efficient and sustainable approach for disposing waste activated sludge (WAS), but the performance is easily affected by environmental conditions. In this study, the potential impacts of chlorhexidine (CHD) and hexadecyltrimethylammonium bromide (HTAB), two highly detected biocides in WAS, on the short-chain fatty acids (SCFAs) generation during anaerobic fermentation were explored. The experimental results indicated that the biocides promoted SCFAs generation unexpectedly, particularly for acetic acid. The accumulation of SCFAs increased from 567.3 mg COD/L in the control to 2144.5 and 3400.0 mg COD/L with low CHD and HTAB exposure (50 mg/L), respectively. However, the enhancing effects were weakened in reactors with high loads of biocides or CHD and HTAB coexistence. Mechanisms exploration revealed that the CHD and HTAB first enhanced the extracellular polymeric substances disruption and then simultaneously accelerated both the hydrolysis and acidification processes while inhi...

An efficient approach of bioconverting the organic wastes in liquor wastewater (LW) and waste activated sludge (WAS) to valuable short-chain fatty acids (SCFAs) via anaerobic fermentation was explored. The maximal SCFAs concentration was 5400 mg COD/L with approximate 80.0% acetic and propionic acids under optimized conditions (LW/WAS ratio 1:1, pH 8 and fermentation 4 d). Mechanisms investigation found that the fermentation of LW/WAS made up the drawbacks of sole WAS fermentation by improving the bioavailable substrates and low C/N ratio to stimulate the microbial activities. The bioconversion efficiency of substrates for SCFAs generation was therefore enhanced. The humic acids present in LW could also play positive roles in SCFAs promotion. Moreover, the performance of LW/WAS fermentation was highly correlated with appropriate fermentation pH. The fermentative bacteria responsible for SCFAs production were highly enriched and the activities of key hydrolases, acid-forming enzymes and ATP concentration were greatly improved at pH 8.

This study reported a novel and efficient approach to improve the anaerobic fermentation performance of waste activated sludge (WAS) by the indigenous iron activated persulfate (PS/Fe) treatment. Firstly, the production of short-chain fatty acids (SCFAs), especially acetic acid, was remarkably enhanced within shorter fermentation time. Mechanism investigations demonstrated that the PS/Fe treatment could simultaneously accelerate and enhance the hydrolysis and acidification process while inhibit the methanogenesis during WAS fermentation. The activities of key enzymes and the abundances of anaerobic microorganisms responsible for SCFAs production were stimulated in the presence of PS/Fe which would promote the biological processes. Secondly, the PS/Fe treatment improved the quality of fermentation residue by reducing the toxic organic compounds in the residue and enhancing the dewaterability of fermented sludge, which was beneficial to the final disposal of WAS with added economical and environmental values.

The study explored an approach to improve the deep denitrification of tail water in denitrifying biofilter (DNBF) by utilizing alternative carbon sources withdrawn from the anaerobic fermentation of soybean wastewater due to its abundance and low costs. It was found in the batch tests that the alternative carbon sources could be obtained from soybean wastewater rapidly under optimal conditions. The obtained carbon sources were mainly consisted of acetic and propionic acids. The denitrification efficiency reached above 91% with the addition of fermented soybean liquids (FSL) with C/N ratio of 5 which was comparable to that of the commercial acetate. Further analysis demonstrated that the FSL was advantageous over the commercial acetate on the formation of biofilms and microbial diversity in DNBF which accounted for the satisfying performance of DNBF on the pollutants removal. Moreover, the potential environ-economic benefits could be expected by utilizing FSL as the alternative carbon source for deep denitrification which exhibited certain prospects in large-scale application.

The catalyst of CuOx/granular activated carbon (GAC) was prepared and used as a heterogeneous Fenton-like catalyst for degradation of phenol in the microwave (MW)-induced H2O2 catalytic oxidation process. The prepared catalysts were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), X-ray diffraction (XRD), and N2 adsorption–desorption techniques. Results showed that CuO and Cu2O were loaded on the surface of GAC. Effects of catalyst dosage, H2O2 dosage, pH, MW power, and MW irradiation time on the degradation efficiency were studied. The phenol degradation efficiency reached 99.96%, corresponding to 88.6% chemical oxygen demand (COD) removal under optimal conditions with MW power of 400 W, CuOx/GAC dosage of 3 g/L, H2O2 dosage of 2 mL/L, reaction time 4 min, and pH 4. The combined method of MW/catalyst/H2O2 has been proven to be much more effective toward phenol degradation than using MW alone, catalyst alone, MW/catalyst, MW/H2O2, and catalyst/H2O2 methods. In the presence of CuOx/GAC catalyst, the mechanism of phenol degradation under MW irradiation combined with H2O2 was suggested. A synergistic effect of catalyst, MW, and H2O2 contributes to the high degradation efficiency of phenol. The obtained kinetic equation for MW catalytic oxidation degradation of phenol was in line with first-order kinetic model.

Granular sludge is considered as a promising technology for wastewater treatment owing to the high biomass retention and excellent settleability. In this study, the formation and underlying mechanisms of granular sludge for stable and efficient nitrite accumulation in glycerol-driven partial denitrification (PD) reactors were investigated. The PD granular sludge (PDGS) was successfully formed with developing and mature stages. The mature PDGS exhibited superior settleability (mean particle size: 468.1 μm, and SVI5:16.4 mL/g SS), and high microbial activity (VSS/SS: 0.80–0.92). The nitrite was stably and efficiently accumulated with an average nitrate-to nitrite transformation ratio of 87.3%. Morphological analysis showed that the mature granules were dominated by cocci and exhibited compact structure with few inorganic components. The proteins (i.e. tyrosine, tryptophan and aromatic protein-like substances) in tightly-bound extracellular polymeric substances (EPS) were expected to play critical roles in the granulation process in view of their good correlation with particle size variation. The EPS contents (mainly polysaccharides and proteins) and living cells were distributed throughout the granule, suggesting the overall high stability and bioactivity of formed PDGS. Moreover, the glycerol-driven PD reactor caused the evident evolution of microbial structure, and the significant enrichment of Saccharibacteria was expected to be responsible for the granulation process, which was increased to 66.6% in the matured sludge. This study confirmed the feasibility and superior performance of PDGS fed with glycerol.

As cost-effective and high-efficient oxidants, the hypochlorite chemicals have been widely utilized for bleaching and disinfection. However, its potential applications in wastewater treatment and sludge disposal were less concerned. This paper mainly summarized the state-of-the-art applications of hypochlorite technology in wastewater and sludge treatment based on the main influencing factors and potential mechanisms of hypochlorite treatment. The results indicated that the hypochlorite approaches were not only effective in pollutants removal and membrane fouling mitigation for wastewater treatment, but also contributed to sludge dewatering and resource recovery for sludge disposal. The ClO- and large generated free active radicals (i.e., reactive chlorine species and reactive oxygen species), which possessed strong oxidative ability, were the primary contributors to the pollutants decomposition, and colloids/microbes flocs disintegration during the hypochlorite treatment process. The performance of hypochlorite treatment was highly associated with various factors (i.e., pH, temperature, hypochlorite types and dosage). In combination with the reasonable activators (i.e., Fe2+ and ultraviolet), auxiliary agents, and innovative processes (i.e., hydrothermal and electro-oxidation), the operational performance of hypochlorite technology could be further enhanced. Finally, the feasibility and benefits of hypochlorite application for wastewater and sludge treatment were analyzed, and the existing challenges and future research efforts that need to be made have also prospected. The review can hopefully provide a theoretical basis and technical guidance to extend the application of hypochlorite technology for wastewater treatment and sludge disposal on large scale.

This work revealed the impacts of exogeneous allicins on the antibiotic resistance genes (ARGs) variations during waste activated sludge (WAS) fermentation process. The overall abundance of ARGs was respectively reduced by 4.84 and 9.42% in presence of 0.01 and 0.05 g allicin/g TSS. Allicins disrupted the EPS structure and increased the permeability of cell membranes, which resulted in the release of ARGs for subsequent removal. Allicins also reduced intracellular ATP levels, which was disadvantageous to ARGs dissemination. Besides, allicins affected the microbial community and decreased the abundance of potential hosts based on bacterial taxa-ARGs network analysis. Moreover, the metabolic pathways and genetic expressions (i.e., two-component system, quorum sensing, and SOS response) involved in ARGs propagation were down-regulated, which caused the ARGs alleviation in allicins-stressed reactors. Overall, the simultaneous responses of cellular status, bacterial host, and genetic regulation accounted for the effective ARGs reduction induced by allicins during WAS fermentation.

This study mainly investigated the feasibility of utilizing cellulase to enhance waste activated sludge (WAS) and paper waste (PW) co-fermentation for the generation of volatile fatty acids (VFAs). The introduction of cellulase effectively enhanced the co-fermentation efficiency, and the maximum VFAs generation reached 3014 mg COD/L with 60 mg cellulase/g TSS while it was 1512 mg COD/L in the control reactor. The presence of cellulase evidently improved the concentration of soluble bioavailable substrates (e.g., carbohydrates and proteins) via inducing the EPS disintegration and PW disruption. More importantly, the functional anaerobes (i.e., Macellibacteroides and Bacteroides) and the microbial activities (i.e., ATP, key acid-forming enzymes, and genetic expressions) that related with the VFAs biosynthesis were enriched and enhanced due to the stimulation of cellulase, contributing to the ultimate VFAs promotion. This study provided a novel strategy to recover valuable products from waste biomass with constructive mechanistic exploration.

The effective removal of refractory antidepressant in wastewater is challenging. In this study, a novel strategy of cysteine-assisted Fe2+/persulfate system (Fe2+/Cys/PS) was applied for the venlafaxine (Ven, as a typical antidepressant) degradation. The obtained results revealed that the Ven removal was evidently accelerated and enhanced in Fe2+/Cys/PS process, and achieved complete degradation in 5 min with optimal dosage. Further analysis indicated that the Ven degradation efficiency was associated with the chemical concentrations (i.e. Fe2+, Cys and PS) and operational conditions (i.e. pH and temperature). Moreover, the reactions were not impacted by the co-occurring organic matters (i.e. fulvic acid) and inorganic ions (i.e. Cl-) potentially existing in real wastewater matrices. Mechanistic explorations demonstrated that the presence of Cys promoted the Fe3+/Fe2+ redox cycle, and thus enhanced the reactive oxygen species yields (ROS). The OH was considered as the primary ROS in Fe2+/Cys/PS process for Ven degradation via the radical scavenger verification. Also, the main intermediates of Ven degradation were identified, and the possible transformation pathway was proposed, in which the hydroxylation attacked by the OH was the main reaction. Moreover, the active reaction sites in Ven were calculated with the density function theory (DFT), which was consistent with the observed metabolic routes.

The wide occurrence of new-emerging pollutants and their potential environmental and ecological risks have recently caused great public concerns. The paper firstly put forward the severe problem. Then the possible main reasons were analyzed which might attribute to both the inefficient removal of wastewater treatment plants with conventional technology and ignorance of the monitor and control of new-emerging pollutants in the effluents. Also, the complexity and extreme high costs may also make the organizations sidestep the problem. Finally, possible strategies to deal with the problems were proposed. The upgrade of wastewater treatment plants was important and urgent.

In this study, the influence of azo dye of methyl red (MR) on COD, dye and phosphorus removal and the transformation of polyhydroxyalkanoate (PHA) and glycogen of phosphate accumulating organisms in enhanced biological phosphorus removal (EBPR) system were investigated. The results indicated COD and dye removal efficiencies were decreased from 97.9% to 72.8% and 99.7% to 82.0%, respectively, when MR concentration was increased from 0 to 40 mg/L. Low MR concentration (5 mg/L) had no influence on P removal and transformation of PHA and glycogen. However, P removal, PHA production and consumption, and glycogen replenishment were seriously inhibited at high MR concentration, while glycogen hydrolysis was simulated at MR concentration of 20 and 40 mg/L. The transformations of PHA and glycogen at aerobic condition were more sensitive to those at anaerobic condition at high MR concentration. These results demonstrated dye and its intermediate products would inhibit the metabolism of polyphosphate accumulating organisms, which should be taken into account in future work.

In the present study, a novel multifunctional Sr2+/Ag–TiO2@rGO ternary hybrid photocatalyst was prepared via facile sol–gel and hydrothermal methods. The prepared catalyst was well characterized by UV-vis, XRD, Raman, HRTEM and XPS. The synthesized composite was utilised for p-NP degradation, E. coli disinfection and H2 generation under visible light. The Sr2+/Ag–TiO2@rGO catalyst showed enhanced photocatalytic H2 evolution rate (64.3 μmol h−1) compared with Ag–TiO2@rGO (30.1 μmol h−1) and TiO2 (no activity). Nearly complete degradation of 15 mg l−1 p-NP was achieved over Sr2+/Ag–TiO2@rGO after 3 h, while only 66% and 5% was achieved by Ag–TiO2@rGO and TiO2 respectively. Furthermore, TEM analysis was carried out on Escherichia coli (E. coli) before and after visible light irradiation to understand the inactivation mechanism and DNA analysis indicated no fragmentation during inactivation. Radical quantification experiments and ESR analysis suggested that ·OH and O2˙− were the main ROS in the degradation and disinfection processes. The superior photocatalytic H2 evolution rate of Sr2+/Ag–TiO2@rGO was attributed to the synergetic effect between the Ag, Sr2+ and TiO2 components on the rGO surface. The localized SPR effect of Ag induced visible light generated charge carriers into the conduction band of the TiO2 and Sr2+ which further transfer to the rGO for the reduction of H+ ions into H2. The results suggest that Sr2+/Ag–TiO2@rGO structures could not only induce separation and migration efficiency of charge carries, but also improve charge collection efficiency for enhanced catalytic activity. Thus, we believe that this work could provide new insights into multifunctional nanomaterials for applications in solar photocatalytic degradation of harmful organics and pathogenic bacteria with clean energy generation during wastewater treatment.

The impacts of the influent type in wastewater treatment plants (WWTPs) on the distribution patterns of the microbial community and functional characteristics were investigated. The obtained results indicated that the influent types exhibited evident influences on the microbial distribution patterns. The diversity and richness of functional microbes in HI-WWTP (with a ratio of >30% industrial wastewater in influents) were evidently decreased compared with those in HM- (with 70–90% municipal wastewater in influents) and M-WWTPs (with >90% municipal wastewater in influents). The core functional bacteria included denitrifiers, anaerobic fermentation bacteria (AFB), organic degrading bacteria (ODB), phosphorus accumulating organisms (PAO) and nitrite oxidizing bacteria (NOB), but they exhibited distinct abundances in WWTPs receiving different categories of wastewater. The denitrifiers in HI-WWTPs was 15.6–32.5% higher than that in other WWTPs, while PAOs had higher abundances in M − and HI-WWTPs (28.9% and 39.3%, respectively) compared with HM-WWTPs. Clear co-occurrence relationships were found among the main functional microbes with similar metabolic characteristics. Moreover, information on functional genes related to carbon, nitrogen and phosphorus metabolism, which is closely associated with pollutant removal efficiency, was obtained. M-WWTPs had higher abundances of genetic expressions for organic matters degradation (i.e. amino acid (10.42%) and carbohydrate (9.86%) metabolisms). Nar, Nir and Nor showed lowest abundances in HM-WWTPs, causing the low nitrogen removal (63.04–65.79%). However, influent type had little effect on genetic expression related with phosphorus removal. This work provided new insights into the interrelationship among bacterial co-occurrence, microbial activity and pollutant removal in WWTPs with different influent types.

In this study, the approach of stimulating the production of volatile fatty acids (VFAs) during food wastes (FW) fermentation by linear alkylbenzene sulphonates (LAS) is proposed and the underlying mechanisms from a metagenomic perspective are analyzed. The results show that with an appropriate level of LAS (50 mg/L), VFA production is greatly enhanced (11854 versus 1825 mg COD/L) with the increased proportions of high-value long-chain ones. Mechanistic explorations indicate that LAS contributes to the solubilization/hydrolysis of the main organic components in FW (i.e., carbohydrates, proteins and lipids) due to the amphipathic features. Besides, LAS would interact with the cell membranes and increase the cell permeability to promote the membrane transport of substrates into the functional microorganisms for further metabolisms. The metagenomic analysis demonstrates that the critical genes involved in hydrolase secretion (i.e., bglX, pepD and lip), ABC transporter (i.e., rfbA and lolD), main substrate metabolism (especially the proteins and lipids, i.e., glsA and glpK) and fatty acid biosynthesis (i.e., accA, accC and accD) all highly expressed in LAS-conditioned reactors. The upregulation of these encoding genes stimulates microbial metabolic activities and improves the production rates of VFAs. Besides, the distribution of functional microbial populations and their associations with genetic expressions in different reactors were investigated. This study provides profound information on the stimulating effects of LAS on FW fermentation for VFA production from genetic and functional perspectives.

This research proposed an innovative approach to synchronously enhance the recovery of phosphorus (P) as vivianite and volatile fatty acids (VFAs) during waste activated sludge (WAS) and food waste (FW) co-fermentation. A high performance was achieved under 30% FW addition and pH uncontrolled, which gained 83.09% of TP recovery as high-purity vivianite (93.90%), together with efficient VFAs production (7671 mg COD/L). The FW supplement could enhance VFAs production and subsequently lower pH to contribute to the release of Fe2+ and PO43−. Also, it could dampen disrupting effects of strong acidic pH on microbial cells (lowering LDH release). Moreover, the flexible pH variation caused by biological acidification could maintain relatively higher microbial activities (increasing enzymes’ activities), which was advantageous to the biological effects involved in Fe2+ and PO43 release and VFAs generation. Therefore, this research provide a promising and economic alternative to dispose of WAS and FW simultaneously for valuable resource recovery.

Disposal of industrial effluents (especially the textile industry) into the drains without prior treatment is a common practice that affects aquatic life and pollutes the soil and groundwater quality. Textile effluents contain organic and inorganic pollutants in terms of high pH, suspended and dissolved solids, chemical oxygen demand, heavy metals, and many other contaminants. Therefore, it is obligatory to dispose off wastewater according to environmental standards. The present study is planned to determine textile wastewater characteristics and recommend efficient and economical treatment options. Wastewater samples from three different industries were collected and analyzed. Nine different treatments using different dosages of alum, activated carbon, and their mixture were used to investigate treatment performance. Analysis of variance and correlation was used to optimize the results. A highly significant correlation was found among the treatments ranging from 92 to 100% for observed parameters. pH, chemical oxygen demand, and total suspended solids were removed significantly. A combination of alum and activated carbon found to be the most efficient treatment. Based on the highly significant results among different parameters, a combined wastewater treatment plant is recommended for a cluster of industrial units.

l-Threonine and three kinds of conductive polymers were applied for anode modification in microbial fuel cells (MFCs) for decolorization of Congo red with simultaneous electricity generation. The description of modified anodes with FTIR, surface contact angle, and CV analysis showed that the anode surface was successfully grafted with functional groups, with improving wettability, as well as the increasing specific surface area and electrochemical activity. For l-threonine modification, the highest decolorization rate of 97% of the MFC, and meanwhile, the maximum current density of 155.8 mA/m2, was obtained at the modified concentration of 400 mg/L. For conductive polymer modifications, the poly (aniline-1,8-diaminonaphthalene) (short for PANDAN) owned the highest performance, with the current density 185 mA/m2, and the decolorization rate was 97%. Compared with l-threonine, the modifications by conductive polymers were more suitable for MFC decolorization due to their functional groups and unique conductivity. In addition, high-throughput sequencing analysis was conducted for the conductive polymers modified anodes to reveal their bioelectrochemical mechanisms.

The low power generation efficiency of microbial fuel cells (MFCs) is always a barrier to further development. An attempt to enhance the start-up and electricity generation of MFCs was investigated by adding different doses of zero-valent iron into anaerobic anode chambers in this study. The results showed that the voltage (289.6 mV) of A2 with 0.5 g of zero-valent iron added was higher than the reference reactor (197.1 mV) without dosing zero-valent iron (A4). The maximum power density of 27.3 mW/m2 was obtained in A2. CV analysis demonstrated that A2 possessed a higher oxidation&ndash, reduction potential, hence showing a stronger oxidizing property. Meanwhile, electrochemical impedance analysis (EIS) also manifested that values of RCT of carbon felts with zero-valent iron supplemented (0.01&ndash, 0.03 &Omega, ) were generally lower. What is more, SEM images further proved and illustrated that A2 had compact and dense meshes with a hierarchical structure rather than a relatively looser biofilm in the other reactors. High-throughput sequencing analysis also indicated that zero-valent iron increased the abundance of some functional microbial communities, such as Acinetobacter, Ignavibacteriales, Shewanella, etc.

An efficient approach for synchronous volatile fatty acids (VFAs) promotion, phosphorus fixation and pathogens inactivation during waste activated sludge (WAS) anaerobic fermentation was achieved with optimal calcium hypochlorite (Ca(ClO)2) stimulation. The maximal VFAs were 3.6 folds of control in reactors with 0.01 g Ca(ClO)2/g TSS addition. The low dosage of Ca(ClO)2 enhanced WAS solubilization and hydrolysis by disrupting the extracellular polymeric substance (EPS) effectively. Sufficient substrates for fermentative bacteria were thereby provided with the maintenance of acceptable microbial activity and viability. However, high dosage of Ca(ClO)2 deteriorated the performance of anaerobic fermentation due to its strong oxidative ability, resulting in cell lysis greatly. Moreover, the largely released phosphorus during WAS fermentation was effectively precipitated and removed by the combination of Ca2+ at 0.01 g Ca(ClO)2/g TSS dosage. In addition, Ca(ClO)2 had distinguished effects on pathogens inactivation. The simultaneous phosphorus fixation and pathogens reduction during VFAs production increased the utilization value of fermentation liquid and benefitted the further disposal of fermented sludge.

The catalytic ozonation treatment of secondary biochemical effluent for papermaking wastewater by Ag-doped nickel ferrite was investigated. Ag-doped catalysts prepared by sol-gel method were characterized, illustrating that Ag entirely entered the crystalline of NiFe

Recently, the growing release of CeO2 nanoparticles (CeO2 NPs) into sewage systems has attracted great concern. Several studies have extensively explored CeO2 NPs’ potential adverse impacts on wastewater treatment plants; however, the impaired activated sludge recovery potentials have seldom been addressed to date. To explore the physicochemical and biological effects on the activated sludge performance and activity recovery of damaged sludge by exposure to CeO2 NPs in sequencing batch reactors (SBRs), four reactors and multiple indicators including water quality, key enzymes, microbial metabolites, the microbial community structure and toxicity were used. Results showed that 10-week exposure to higher CeO2 NP concentration (1, 10 mg/L) resulted in a sharp decrease in nitrogen and phosphorus removal efficiencies, which were consistent with the tendencies of key enzymes. Meanwhile, CeO2 NPs at concentrations of 0.1, 1, and 10 mg/L decreased the secretion of tightly bound extracellular polymeric substances to 0.13%, 3.14%, and 28.60%, respectively, compared to the control. In addition, two-week recovery period assays revealed that the functional bacteria Proteobacteria, Nitrospirae and Planctomycetes recovered slightly at the phyla level, as analyzed through high-throughput sequencing, which was consistent with the small amount of improvement of the effluent performance of the system. This reflected the small possibility of the activity recovery of damaged sludge.

Degradation of humic acid (HA) in heterogeneous electro-Fenton/chlorine processes was investigated using a catalyst of Mn-Cu bimetallic oxides supported on Al-containing MCM-41. The catalyst was synthesized by co-precipitation method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N2 adsorption–desorption, and X-ray photoelectron spectroscopy (XPS) techniques. The bimetallic oxide catalyst exhibited a higher activity compared to monometallic one. Adding Al in the bimetallic oxide catalyst enhanced the stability of the catalyst, reduced metal ion leaching, increased the initial ratio of Mn3+/Mn4+ and Cu+/Cu2+, and slightly enhanced the degradation efficiency of HA and corresponding chemical oxygen demand (COD). The effect of Mn and Cu content in MCM-41, catalyst dosage, pH value, and initial concentration of HA and salinity on degradation efficiency were investigated. A high COD reduction about 91.5% and general current efficiency (GCE) about 41.7% have been achieved under the optimal conditions of pH 6, salinity 1000 mg/L, catalyst dosage 0.5 g/L, HA sodium salt concentration 200 mg/L, and reaction time 60 min. A possible mechanism for the reaction was suggested. Kinetic analysis showed that HA degradation in the electro-Fenton/chlorine processes was fit with first-order kinetics.

The denitrification process is crucial for biological nitrogen removal in wastewater treatment plants (WWTPs). In this study, the nitrogen removal efficiency in full-scale WWTPs with different treatment processes and influent characteristics was investigated. The results indicated that the average total nitrogen removal rate (NRR) and denitrification rate in the A/O or A2/O systems were 67.5% and 2.08 mg N h−1 gMLVSS−1, respectively. However, cyclic activated sludge systems (CASSs) showed more efficient nitrogen removal with an average NRR and denitrification rate of 79.6% and 9.89 mg N h−1 gMLVSS−1, respectively. The microbial communities in WWTPs with similar influent compositions were similar and mainly shaped by BOD5. Candidatus Competibacter, Caldilineaceae and Anaerolineaceae were the functional genera closely associated with nitrogen removal based on high-throughput sequencing and correlation analysis. This study provides new insights into the regulation and amelioration of full-scale WWTPs to meet the increasingly stringent nitrogen discharge standard.

In this study, the effect of Chlamydomonas reinhardtii on the fate of CuO nanoparticles (CuO-NPs) in aquatic environment were investigated in terms of the colloidal stability, the free Cu2+ releasing, extracellular adsorption Cu (Cuex) and intracellular assimilation Cu (Cuin). The results showed that, with the increasing microalgal density, the absolute value of zeta potential of CuO-NPs decreased and the mean hydrodynamic diameter (MHD) became larger, leading to a better aggregation and settling behavior of CuO-NPs. The microalgae also promoted the free Cu2+ releasing, however, inhibited adsorption and assimilation of metal nanoparticles (MNPs) into microalgal cells, resulting in the reduction of the Cuex and Cuin per microalgal cell. The phenomenon was probably due to the reduced chance of contact between microalgae and MNPs. The internalization of CuO-NPs was also observed in microalgal cells by high resolution transmission electron microscope (HRTEM). Furthermore, the results of fast fourier transform (FFT)/inversed FFT (IFFT) analysis indicated that the CuO-NPs was reduced to Cu2O-NPs in the microalgae cells. The above results suggested that the microalgae can significantly affect the fate of MNPs, and subsequently, influencing the bioavailability and toxicity of MNPs in the aquatic environment.

Recently, the growing release of CeO2 nanoparticles (CeO2 NPs) into sewage systems has attracted great concern. Several studies have extensively explored CeO2 NPs’ potential adverse impacts on wastewater treatment plants; however, the impaired activated sludge recovery potentials have seldom been addressed to date. To explore the physicochemical and biological effects on the activated sludge performance and activity recovery of damaged sludge by exposure to CeO2 NPs in sequencing batch reactors (SBRs), four reactors and multiple indicators including water quality, key enzymes, microbial metabolites, the microbial community structure and toxicity were used. Results showed that 10-week exposure to higher CeO2 NP concentration (1, 10 mg/L) resulted in a sharp decrease in nitrogen and phosphorus removal efficiencies, which were consistent with the tendencies of key enzymes. Meanwhile, CeO2 NPs at concentrations of 0.1, 1, and 10 mg/L decreased the secretion of tightly bound extracellular polymeric substances to 0.13%, 3.14%, and 28.60%, respectively, compared to the control. In addition, two-week recovery period assays revealed that the functional bacteria Proteobacteria, Nitrospirae and Planctomycetes recovered slightly at the phyla level, as analyzed through high-throughput sequencing, which was consistent with the small amount of improvement of the effluent performance of the system. This reflected the small possibility of the activity recovery of damaged sludge.

This study presented an innovative method for phosphorus (P) recovery as vivianite from waste activated sludge (WAS) via optimizing iron dosing and pH value during anaerobic fermentation (AF). The optimal conditions for vivianite formation were in the pH range of 6.0–9.0 with initial PO43− >5 mg/L and Fe/P molar ratio of 1.5. Notably, FeCl3 showed advantages over ZVI for the simultaneous release of Fe2+ and PO43− during WAS fermentation, especially in acidic conditions. The FeCl3 dosing at pH 3.0 could contribute to 78.81% Fe2+ release and 85.69% of total PO43− release from WAS. They were ultimately recovered in the form of high-purity vivianite (93.67%). Clostridiaceae (40.25%) was the predominant bacteria in FeCl3-pH3 reactors, which played key roles in inducing dissimilatory iron reduction for Fe2+ formation. Therefore, P recovery as vivianite from WAS fermentation might be a promising and highly valuable approach to relieve the P crisis.