Search

A cross-linker and an elastomer are used to increase the mechanical compliance of the active layer in organic solar cells based on fullerene and non-fullerene acceptors without compromising their performance.

Top and bottom surfaces of polymer films are used to construct interfaces in heterojunction based devices, affecting device figure of merit significantly with their different aggregation states.

Rapid increase in the power conversion efficiency of organic solar cells (OSCs) has been achieved with the development of non-fullerene small-molecule acceptors (NF-SMAs). Although the morphological stability of these NF-SMA devices critically affects their intrinsic lifetime, their fundamental intermolecular interactions and how they govern property–function relations and morphological stability of OSCs remain elusive. Here, we discover that the diffusion of an NF-SMA into the donor polymer exhibits Arrhenius behaviour and that the activation energy Ea scales linearly with the enthalpic interaction parameters χH between the polymer and the NF-SMA. Consequently, the thermodynamically most unstable, hypo-miscible systems (high χ) are the most kinetically stabilized. We relate the differences in Ea to measured and selectively simulated molecular self-interaction properties of the constituent materials and develop quantitative property–function relations that link thermal and mechanical characteristics of the NF-SMA and polymer to predict relative diffusion properties and thus morphological stability. Studies on the morphology stability of polymer donor–small-molecule acceptor blends relevant to solar cell stability reveal relationships between their intermolecular interactions and the thermodynamic, kinetic, thermal and mechanical properties.

Colloidal quantum dots (QDs) have lately been pursued with intense vigor for optoelectronic applications such as photovoltaics (PV), flexible electronics, displays, mid-infrared photodetectors, las...

Solution-processed colloidal quantum dot (CQD) photovoltaics (PVs) continue to mature with improvements in device architectures and ligand exchange strategies. Carrier selective contacts extract ph...

Progress in chalcogenide and perovskite CQD optoelectronics has relied to a significant extent on solid-state ligand exchanges (SSEs): the replacement of initial insulating ligands with shorter con...

Light-emitting diodes (LEDs) based on excitonic material systems, in which tightly bound photoexcited electron–hole pairs migrate together rather than as individual charge carriers, offer an attractive route to developing solution-processed, high-performance light emitters. Here, we demonstrate bright, efficient, excitonic infrared LEDs through the incorporation of quantum dots (QDs)1 into a low-dimensional perovskite matrix. We program the surface of the QDs to trigger fast perovskite nucleation to achieve homogeneous incorporation of QDs into the matrix without detrimental QD aggregation, as verified by in situ grazing incidence wide-angle X-ray spectroscopy. We tailor the distribution of the perovskites to drive balanced ultrafast excitonic energy transfer to the QDs. The resulting LEDs operate in the short-wavelength infrared region, an important regime for imaging and sensing applications, and exhibit a high external quantum efficiency of 8.1% at 980 nm at a radiance of up to 7.4 W Sr−1 m−2. Embedding perovskite quantum dots in perovskite leads to bright, efficient 980 nm LEDs with applications in imaging and sensing.

As a coating method compatible with printing, one-step spin-coating is widely used for fabricating perovskite thin films. Controlling the crystal growth rate of two precursors is essential to obtain a homogeneous film morphology. However, the film formation mechanism and role of solvate systems during spin-coating have not yet been clearly revealed. In this work, we implemented the in situ grazing incidence wide-angle X-ray scattering of CH3NH3PbI3 perovskite material based on various additive systems to adjust the unbalanced crystal growth rate of CH3NH3I and PbI2. As we expected, the behavior of the solvate phase was strikingly mediated by various additives, and one of the additives greatly slowed the PbI2 solvate phase, thus overcoming the imbalance in the crystal growth rate. Consequently, the well-controlled perovskite films have both good film morphology and high photovoltaic performance with excellent reproducibility.

Perovskite photovoltaics have made extraordinary strides in efficiency and stability thanks to process and formulation developments like anti-solvent dripping and mixed-cation mixed-halide compositions. Solar cell fabrication through low-cost scalable methods, such as blade coating, cannot accommodate anti-solvent dripping and needs to be performed in an ambient atmosphere. Consequently, their efficiency has lagged behind that of spin-cast devices, fabricated in an inert atmosphere and with carefully timed anti-solvent dripping to control nucleation and growth. In this study, we demonstrate formamidinium (FA)-dominated mixed-halide mixed-cation perovskite solar cells fabricated by blade coating in ambient air (T = 23 °C and RH ≈ 50%) without the benefits of anti-solvent dripping or a moisture-free environment. We investigated the solidification process during blade coating of single-cation (FAPbI3) and increasingly complex mixed-cation mixed-halide (FA0.8MA0.15Cs0.05PbI2.55Br0.45, MA is methylammonium) perovskites in situ using time-resolved grazing incidence wide-angle X-ray scattering (GIWAXS). We found that the perovskite precursor composition and the blade coating temperature profoundly influence the crystallization mechanism and whether halide segregation occurs or not. The inclusion of Br− suppresses the non-perovskite 2H phase, promoting instead PbI2 together with the intermediate 6H phase and 3C phase of FAPbI2.55Br0.45. Addition of Cs+ suppresses these intermediates and promotes the direct crystallization of the perovskite 3C phase FA0.8MA0.15Cs0.05PbI2.55Br0.45 when coating at elevated temperature, unlike when anti-solvent dripping is used at room temperature. Through control of ink formulation and coating conditions, we demonstrate blade coated perovskite solar cells with a champion power conversion efficiency (PCE) of 18.20% as compared with FAPbI3 perovskites, which yield a PCE of 12.35% under similar conditions without the benefit of anti-solvent dripping. This study provides valuable insight into the crystallization pathway of mixed-cation mixed-halide formulations without anti-solvent dripping under high-temperature processing conditions that enable the translation of perovskites toward upscalable ambient manufacturing under high throughput conditions.

The vast chemical and processing universe of emerging halide perovskite materials can be overwhelming to traditional research practices. The sheer scale of the design problem and the emergent nature of many phenomena, including highly nonequilibrium thin film processing, complex solution-to-solid phase transformation can be overwhelming for traditional trial-and-error investigations. Solving such a complex problem would benefit from a robot-in-the-loop strategy that can accelerate many of the manual tasks as well as reduce cost and waste generation and support implementation of artificial intelligence. We present the RoboMapper, our recent effort to leverage robotic automation towards accelerating parameter space exploration and establishment of formulation-structure-property relationships with orders of magnitude enhancement in research efficiency. We will demonstrate formulation, printing and characterization of halide perovskites towards the aim of accelerating research workflows.

Cost management and toxic waste generation are two key issues that must be addressed before the commercialization of perovskite optoelectronic devices. We report a groundbreaking strategy for eco-friendly and cost-effective fabrication of highly efficient perovskite solar cells. This strategy involves the usage of a high volatility co-solvent, which dilutes perovskite precursors to a lower concentration (1.4 M) solution. More than 70% of toxic waste and material cost can be reduced. Mechanistic insights reveal ultra-rapid evaporation of the co-solvent together with beneficial alteration of the precursor colloidal chemistry upon dilution with co-solvent, which in-situ studies and theoretical simulations confirm. The co-solvent tuned precursor colloidal properties also contribute to the enhancement of the stability of precursor solution, which extends its processing window thus minimizing the waste. This strategy is universally successful across different perovskite compositions, and scales from small devices to large-scale modules using industrial spin-coating, potentially easing the lab-to-fab translation of perovskite technologies., A universal strategy is reported for formation of very low concentration of perovskite precursor inks that yields high-efficiency photovoltaics while substantially reducing toxic waste generation, fabrication cost and process complexity, thus taking a step closer towards commercialization.

Summary All-inorganic halide perovskites hold promise for emerging thin-film photovoltaics due to their excellent thermal stability. Unfortunately, it has been challenging to achieve high-quality films over large areas using scalable methods under realistic ambient conditions. Herein, we investigated the coupling between the fluid dynamics and the structural evolution during controlled film formation for ambient scalable fabrication of CsPbI2Br perovskite films using blade coating. We simultaneously overcame the negative influences of moisture attack and the Benard-Marangoni instability in the drying ink and achieved an ideal sequential crystallization with changing halide composition during the film formation. As a result, we produced highly crystalline, uniform, and pinhole-free CsPbI2Br films with superior photophysical and transport properties. High-performance solar cells are fabricated to achieve power conversion efficiencies (PCEs) of 14.7% for small-aperture-area (0.03 cm2) devices and 12.5% for the large-aperture-area (1.0 cm2) ones, the highest PCE reported to date for large-area all-inorganic perovskite solar cells.

Summary Mixed lead halide perovskite solar cells have been demonstrated to benefit tremendously from the addition of Cs+ and Rb+, but its root cause is yet to be understood. This hinders further improvement, and processing approaches remain largely empirical. We address the challenge by tracking the solidification of precursors in situ and linking the evolutions of different crystalline phases to the presence of Cs+ and Rb+. In their absence, the perovskite film is inherently unstable, segregating into MA-I- and FA-Br-rich phases. Adding either Cs+ or Rb+ is shown to alter the solidification process of the perovskite films. The optimal addition of both Cs+ and Rb+ drastically suppress phase segregation and promotes the spontaneous formation of the desired α phase. We propose that the synergistic effect is due to the collective benefits of Cs+ and Rb+ on the formation kinetics of the α phase and on the halide distribution throughout the film.

The stability of solution-processed semiconductors remains an important area for improvement on their path to wider deployment. Inorganic caesium lead halide perovskites have a bandgap well suited to tandem solar cells1 but suffer from an undesired phase transition near room temperature2. Colloidal quantum dots (CQDs) are structurally robust materials prized for their size-tunable bandgap3; however, they also require further advances in stability because they are prone to aggregation and surface oxidization at high temperatures as a consequence of incomplete surface passivation4,5. Here we report ‘lattice-anchored’ hybrid materials that combine caesium lead halide perovskites with lead chalcogenide CQDs, in which lattice matching between the two materials contributes to a stability exceeding that of the constituents. We find that CQDs keep the perovskite in its desired cubic phase, suppressing the transition to the undesired lattice-mismatched phases. The stability of the CQD-anchored perovskite in air is enhanced by an order of magnitude compared with pristine perovskite, and the material remains stable for more than six months at ambient conditions (25 degrees Celsius and about 30 per cent humidity) and more than five hours at 200 degrees Celsius. The perovskite prevents oxidation of the CQD surfaces and reduces the agglomeration of the nanoparticles at 100 degrees Celsius by a factor of five compared with CQD controls. The matrix-protected CQDs show a photoluminescence quantum efficiency of 30 per cent for a CQD solid emitting at infrared wavelengths. The lattice-anchored CQD:perovskite solid exhibits a doubling in charge carrier mobility as a result of a reduced energy barrier for carrier hopping compared with the pure CQD solid. These benefits have potential uses in solution-processed optoelectronic devices. The stability of both colloidal quantum dots and perovskites can be improved by combining them into a hybrid material in which matched lattice parameters suppress the formation of undesired phases.

Colloidal quantum dots (CQDs), which benefit from a size-tuned bandgap, are a solution-processed material for infrared energy harvesting. This characteristic enables the fabrication of solar cells ...

The addition of dimethylsulfoxide and Zonyl into poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) can be combined to achieve excellent electrical, optical, and mechanical properties. We demonstrate that it is possible to produce highly transparent conducting electrodes (FoM35) with low Young's modulus and high carrier density. We investigated the relationship between the transport properties of PEDOT:PSS and the morphology and microstructure of these films by performing Hall effect measurement, atomic force microscopy, and grazing incidence wide-angle X-ray scattering (GIWAXS). Our analysis reveals the distinctive impact of the two additives on the PEDOT and PSS components in the solid-state PEDOT:PSS films. Both additives induce fibrillar formation in the film, and the combination of the two additives only enhances the fibrillary nature and the aggregations of both PEDOT and PSS components of the film. In situ GIWAXS allows to time-resolve the morphology evolution. Our analysis reveals the influence of additives on the aggregation and self-assembly behaviors of the PEDOT and PSS components. Aggregation occurs during the transition from wet to dry film, which is observed exclusively during the thermal annealing step of the as-cast hydrated film. These results indicate that the additives directly influence the self-assembly behaviors of PEDOT and PSS during the ink-to-solid phase transformation of the hydrated film, which occurs primarily during the initial seconds of post-deposition thermal annealing.

Single crystalline perovskites exhibit high optical absorption, long carrier lifetime, large carrier mobility, low trap-state-density and high defect tolerance. Unfortunately, all single crystalline perovskites attained so far are limited to bulk single crystals and small area wafers. As such, it is impossible to design highly demanded flexible single-crystalline electronics and wearable devices including displays, touch sensing devices, transistors, etc. Herein we report a method of induced peripheral crystallization to prepare large area flexible single-crystalline membrane (SCM) of phenylethylamine lead iodide (C6H5C2H4NH3)2PbI4 with area exceeding 2500 mm2 and thinness as little as 0.6 μm. The ultrathin flexible SCM exhibits ultralow defect density, superior uniformity and long-term stability. Using the superior ultrathin membrane, a series of flexible photosensors were designed and fabricated to exhibit very high external quantum efficiency of 26530%, responsivity of 98.17 A W−1 and detectivity as much as 1.62 × 1015 cm Hz1/2 W−1 (Jones)., Hybrid halide perovskite single crystals show excellent optoelectronic properties but their small size and large thickness limit their application. Herein Liu et al. grow large area ultrathin flexible crystalline membrane of layered perovskite and demonstrate high detectivity in the flexible photosensors.

Eco-friendly printing is important for mass manufacturing of thin-film photovoltaic (PV) devices to preserve human safety and the environment and to reduce energy consumption and capital expense. However, it is challenging for perovskite PVs due to the lack of eco-friendly solvents for ambient fast printing. In this study, we demonstrate for the first time an eco-friendly printing concept for high-performance perovskite solar cells. Both the perovskite and charge transport layers were fabricated from eco-friendly solvents via scalable fast blade coating under ambient conditions. The perovskite dynamic crystallization during blade coating investigated using in situ grazing incidence wide-angle X-ray scattering (GIWAXS) reveals a long sol-gel window prior to phase transformation and a strong interaction between the precursors and the eco-friendly solvents. The insights enable the achievement of high quality coatings for both the perovskite and charge transport layers by controlling film formation during scalable coating. The excellent optoelectronic properties of these coatings translate to a power conversion efficiency of 18.26% for eco-friendly printed solar cells, which is on par with the conventional devices fabricated via spin coating from toxic solvents under inert atmosphere. The eco-friendly printing paradigm presented in this work paves the way for future green and high-throughput fabrication on an industrial scale for perovskite PVs.

Solution processing via roll-to-roll (R2R) coating promises a low cost, low thermal budget, sustainable revolution for the production of solar cells. Poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3‴-di(2-octyldodecyl)-2,2′;5′,2″;5″,2‴-quaterthiophen-5,5-diyl)], PffBT4T-2OD, has recently been shown to achieve high power conversion efficiency (>10%) paired with multiple acceptors when thick films are spun-coat from hot solutions. We present detailed morphology studies of PffBT4T-2OD based bulk heterojunction films deposited by the volume manufacturing compatible techniques of blade-coating and slot-die coating. Significant aspects of the film morphology, the average crystal domain orientation and the distribution of the characteristic phase separation length scales, are remarkably different when deposited by the scalable techniques vs spun-coat. Yet, we find that optimized blade-coated devices achieve PCE >9.5%, nearly the same as spun-coat. These results challenge some widely accepted propositions regarding what is an optimal BHJ morphology and suggest the hypothesis that diversity in the morphology that supports high performance may be a characteristic of manufacturable systems, those that maintain performance when coated thicker than ≈200 nm. In situ measurements reveal the key differences in the solidification routes for spin- and blade- coating leading to the distinct film structures.

Tandem structure provides a practical way to realize high efficiency organic photovoltaic (OPV) cells due to the limited optical absorption in organic semiconductors and tandem cells can be used to extend the wavelength coverage of the solar spectrum for light harvesting. The interconnecting layer (ICL) between subcells in a tandem solar cell plays a critical role in the reproducibility and the performance of tandem devices, and the processability of the ICL in a tandem cell has been a challenge. In this work we report on the fabrication of highly reproducible high efficiency tandem cells by employing a commercially available material, PEDOT:PSS HTL Solar (HSolar), as the hole transporting material used for the ICL. Comparing with the conventional PEDOT:PSS Al 4083, HSolar offers a better wettability on the underlying non-fullerene photoactive layers, resulting in better charge extraction properties of the ICL. When FTAZ:IT-M and PTB7-Th:IEICO-4F are used as the front cell and the back cells to fabricate the tandem solar cells, a power conversion efficiency (PCE) of 14.7% is achieved. To validate the processability of these tandem cells, three other research groups have successfully fabricated tandem cells using the same recipe and the highest PCE obtained is 16.1%. With further development of donor polymers and device optimization, our device simulation results show that a PCE < 22% can be realized in tandem cells in the near future.

The morphology of conjugated polymer thin films, determined by the kinetics of film drying, is closely correlated with their electrical properties. Herein, we focused on dramatic changes in the thin-film morphology of blade-coated poly­{[N,N′-bis­(2-octyldodecyl)-naphthalene-1,4,5,8-bis­(dicarboximide)-2,6-diyl]-alt-5,5′-(2,2′-bithiophene)} caused by the effect of solvent and coating temperature. Through in situ measurements, the evolution of polymer aggregates and crystallites, which plays a decisive role in the formation of the charge-transport pathway, was observed in real time. By combining in situ ultraviolet–visible spectroscopy and in situ grazing-incidence wide-angle X-ray scattering analysis, we could identify five distinct stages during the blade-coating process; these stages were observed irrespective of the solvent and coating temperature used. The five stages are described in detail with a proposed model of film formation. This insight is an important step in understanding the relationship between the morphology of thin polymer films and their charge-transport properties as well as in optimizing the structural evolution of thin films.

he authors acknowledge King Abdullah University of Science and Technology (KAUST) for financial support. This publication is based upon work supported by the King Abdullah University of Science and Technology (KAUST) Office of Sponsored Research (OSR) under Award No: OSR-2018-CARF/CCF-3079.

High-performance low-band-gap polymer semiconductors are visibly colored, making them unsuitable for transparent and imperceptible electronics without reducing film thickness to the nanoscale range. Herein, we demonstrate polymer/insulator blends exhibiting favorable miscibility that improves the transparency and carrier transport in an organic field-effect transistor (OFET) device. The mesoscale structures leading to more efficient charge transport in ultrathin films relevant to the realization of transparent and flexible electronic applications are explored based on thermodynamic material interaction principles in conjunction with optical and morphological studies. By blending the commodity polymer polystyrene (PS) with two high-performing polymers, PDPP3T and P (NDI2OD-T2) (known as N2200), a drastic difference in morphology and fiber network are observed due to considerable differences in the degree of thermodynamic interaction between the conjugated polymers and PS. Intrinsic material interaction behavior establishes a long-range intermolecular interaction in the PDPP3T polymer fibrillar network dispersed in the majority (80%) PS matrix resulting in a ca. 3-fold increased transistor hole mobility of 1.15 cm2 V-1 s-1 (highest = 1.5 cm2 V-1 s-1) as compared to the pristine material, while PS barely affects the electron mobility in N2200. These basic findings provide important guidelines to achieve high mobility in transparent OFETs.

Halide vacancies and associated metallic lead (Pb°) observed at the surface and deep inside macroscopic organolead trihalide perovskite crystals is removed through a facile and noninvasive treatment. Indeed, Br2 vapor is shown to passivate Br-vacancies and associated Pb° in the bulk of macroscopic crystals. Controlling the exposure time can markedly improve the overall stoichiometry for moderate exposures or introduce excessive bromide for long exposures, resulting in p-doping of the crystals. In the low dose passivation regime, Hall effect measurements reveal a ca. 3-fold increase in carrier mobility to ca. 15 cm2V-1s-1, while the p-doping increases the electrical conductivity ca. 10000-fold, including a 50-fold increase in carrier mobility to ca. 150 cm2V-1s-1. The ease of diffusion of Br2 vapor into macroscopic crystals is ascribed to the porosity allowed in rapidly grown crystals through aggregative processes of the colloidal sol during growth of films and macroscopic crystals. This process is believed to form significant growth defects, including open voids, which may be remnants of the escaping solvent at the solidification front. These results suggest that due to the sol-gel-like nature of the growth process, macroscopic perovskite crystals reported in this study are far from perfect and point to possible pathways to improving the optoelectronic properties of these materials. Nevertheless, the ability of the vapor-phase approach to access and tune the bulk chemistry and properties of nominally macroscopic perovskite crystals provides interesting new opportunities to precisely manipulate and functionalize the bulk properties of hybrid perovskite crystals in a noninvasive manner.

Solution-processed metal halide perovskite (MHP) single crystals (SCs) are in high demand for a growing number of printed electronic applications due to their superior optoelectronic properties compared to polycrystalline thin films. There is an urgent need to make SC fabrication facile, scalable, and compatible with the printed electronic manufacturing infrastructure. Here, a universal cosolvent evaporation (CSE) strategy is presented by which perovskite SCs and arrays are produced directly on substrates via printing and coating methods within minutes at room temperature from drying droplets. The CSE strategy successfully guides the supersaturation via controlled drying of droplets to suppress all crystallization pathways but one, and is shown to produce SCs of a wide variety of 3D, 2D, and mixed-cation/halide perovskites with consistency. This approach works with commonly used precursors and solvents, making it universal. Importantly, the SC consumes the precursor in the droplet, which enables the large-scale fabrication of SC arrays with minimal residue. Direct on-chip fabrication of 3D and 2D perovskite photodetector devices with outstanding performance is demonstrated. The approach shows that any MHP SC can now be manufactured on substrates using precision printing and scalable, high-throughput coating methods.

The quantum-confined Stark effect (QCSE) is an established optical modulation mechanism, yet top-performing modulators harnessing it rely on costly fabrication processes. Here, we present large modulation amplitudes for solution-processed layered hybrid perovskites and a modulation mechanism related to the orientational polarizability of dipolar cations confined within these self-assembled quantum wells. We report an anomalous (blue-shifting) QCSE for layers that contain methylammonium cations, in contrast with cesium-containing layers that show normal (red-shifting) behavior. We attribute the blue-shifts to an extraordinary diminution in the exciton binding energy that arises from an augmented separation of the electron and hole wavefunctions caused by the orientational response of the dipolar cations. The absorption coefficient changes, realized by either the red- or blue-shifts, are the strongest among solution-processed materials at room temperature and are comparable to those exhibited in the highest-performing epitaxial compound semiconductor heterostructures., The quantum-confined Stark effect is conventionally observed in inorganic semiconductor multilayer quantum well structures that are expensive to make. Here Walters et al. report large Stark effects in easily made layered hybrid perovskites and exploit the orientational polarizability of dipolar cations.

Reduced-dimensional metal halide perovskites (RDPs) have attracted significant attention in recent years due to their promising light harvesting and emissive properties. We sought to increase the systematic understanding of how RDPs are formed. Here we report that layered intermediate complexes formed with the solvent provide a scaffold that facilitates the nucleation and growth of RDPs during annealing, as observed via in situ X-ray scattering. Transient absorption spectroscopy of RDP single crystals and films enables the identification of the distribution of quantum well thicknesses. These insights allow us to develop a kinetic model of RDP formation that accounts for the experimentally observed size distribution of wells. RDPs exhibit a thickness distribution (with sizes that extend above n = 5) determined largely by the stoichiometric proportion between the intercalating cation and solvent complexes. The results indicate a means to control the distribution, composition and orientation of RDPs via the selection of the intercalating cation, the solvent and the deposition technique. A systematic analysis is performed to reveal how deposition conditions and the use of cations and solvents affect the composition and orientation of 2D and quasi-2D metal halide perovskites in thin films.

Summary Here, we have identified that the key issue for rational transitioning from spin-coating to blade-coating processes of perovskite films arises from whether intermediate phases participate in the phase transition. In situ characterizations were carried out to provide a comprehensive picture of structural evolution and crystal growth mechanisms. These findings present opportunities for designing an effective process for blade-coating perovskite film: a large-grained dense perovskite film with high crystal quality and photophysical properties can be obtained only via direct crystallization for both spin-coating and blade-coating processes. As a result, the blade-coated MAPbI3 films deliver excellent charge-collection efficiency at both short circuit and open circuit, and photovoltaic properties with efficiencies of 18.74% (0.09 cm2) and 17.06% (1 cm2) in planar solar cells. The significant advances in understanding how the phase transition links spin-coating and blade-coating processes should provide a path toward high-performance printed perovskite devices.

Realization of colloidal quantum dot (CQD)/organic photovoltaic (OPV) tandem solar cells that integrate the strong infrared absorption of CQDs with large photovoltages of OPVs is an attractive option toward high-performing, low-cost thin-film solar cells. To date, monolithic hybrid tandem integration of CQD/OPV solar cells has been restricted due to the CQD ink’s catastrophic damage to the organic subcell, thus forcing the low-band-gap CQD to be used as a front cell. This suboptimal configuration limits the maximum achievable photocurrent in CQD/OPV hybrid tandem solar cells. In this work, we demonstrate hybrid tandem solar cells employing a low-band-gap CQD back cell on top of an organic front cell thanks to a modified CQD ink formulation and a robust interconnection layer (ICL), which together overcome the long-standing integration challenges for CQD and organic subcells. The resulting tandem architecture surpasses previously reported current densities by ∼20–25% and yields a state-of-the-art power conv...

Blade-coating has recently emerged as a scalable fabrication method for hybrid perovskite solar cells, but it currently underperforms spin-coating, yielding a power conversion efficiency (PCE) of ∼15% for CH3NH3PbI3 (MAPbI3). We investigate the solidification of MAPbI3 films in situ during spin/blade-coating using optical and X-ray scattering methods. We find that the coating method and conditions profoundly influence the crystallization process, which proceeds through intermediate crystalline solvates. The polymorphism and composition of the solvates are mediated by the solvent removal rate dictated by the process temperature in blade-coating. Low to intermediate temperatures (25–80 °C) yield solvates with differing compositions and yield poor PCEs (∼5–8%) and a large spread (±2.5%). The intermediate solvates are not observed at elevated temperatures (>100 °C), pointing to direct crystallization of the perovskite from the sol–gel ink. These conditions yield large and compact spherulitic domains of perovs...

Ambient stability remains a critical hurdle for commercialization of perovskite solar cells. Two-dimensional Ruddlesden–Popper (RP) perovskite solar cells exhibit excellent stability but suffer from low photovoltaic performance so far. Herein, a RP/3D heterostructure passivated by semiconducting molecules is reported, which systematically addresses both charge dynamics and degradation mechanisms in concert for cesium-free FAPbI3 solar cells, delivering a power-conversion efficiency as high as 20.62% and remarkable long-term ambient stability with a t80 lifetime exceeding 2880 hours without encapsulation. In situ characterizations were carried out to gain insight into structural evolution and crystal growth mechanisms during spin coating. Comprehensive film and device characterizations were performed to understand the influences of the RP perovskite and molecule passivation on the film quality, photovoltaic performance and degradation mechanisms. This enables fabrication of a superior quality film with significantly improved optoelectronic properties, which lead to higher charge collection efficiency. The underlying mitigated degradation mechanisms of the passivated RP/3D devices were further elucidated. The understanding of the necessity of addressing both the charge dynamics and degradation mechanisms of solar cells will guide the future design and fabrication of chemically stable, high-efficiency photovoltaic devices.