Search

Abstract Background The understanding of the biological function, regulation, and cellular interactions of the yeast genome and proteome, along with the high conservation in gene function found between yeast genes and their human homologues, has allowed for Saccharomyces cerevisiae to be used as a model organism to deduce biological processes in human cells. Here, we have completed a systematic screen of the entire set of 4,733 haploid S. cerevisiae gene deletion strains (the entire set of nonessential genes for this organism) to identify gene products that modulate cellular toxicity to nickel sulfate (NiSO4). Results We have identified 149 genes whose gene deletion causes sensitivity to NiSO4 and 119 genes whose gene deletion confers resistance. Pathways analysis with proteins whose absence renders cells sensitive and resistant to nickel identified a wide range of cellular processes engaged in the toxicity of S. cerevisiae to NiSO4. Functional categories overrepresented with proteins whose absence renders cells sensitive to NiSO4 include homeostasis of protons, cation transport, transport ATPases, endocytosis, siderophore-iron transport, homeostasis of metal ions, and the diphthamide biosynthesis pathway. Functional categories overrepresented with proteins whose absence renders cells resistant to nickel include functioning and transport of the vacuole and lysosome, protein targeting, sorting, and translocation, intra-Golgi transport, regulation of C-compound and carbohydrate metabolism, transcriptional repression, and chromosome segregation/division. Interactome analysis mapped seven nickel toxicity modulating and ten nickel-resistance networks. Additionally, we studied the degree of sensitivity or resistance of the 111 nickel-sensitive and 72 -resistant strains whose gene deletion product has a similar protein in human cells. Conclusion We have undertaken a whole genome approach in order to further understand the mechanism(s) regulating the cell's toxicity to nickel compounds. We have used computational methods to integrate the data and generate global models of the yeast's cellular response to NiSO4. The results of our study shed light on molecular pathways associated with the cellular response of eukaryotic cells to nickel compounds and provide potential implications for further understanding the toxic effects of nickel compounds to human cells.

Abstract Background Upon exposure to agents that damage DNA, Saccharomyces cerevisiae undergo widespread reprogramming of gene expression. Such a vast response may be due not only to damage to DNA but also damage to proteins, RNA, and lipids. Here the transcriptional response of S. cerevisiae specifically induced by DNA damage was discerned by exposing S. cerevisiae to a panel of three "radiomimetic" enediyne antibiotics (calicheamicin γ1I, esperamicin A1 and neocarzinostatin) that bind specifically to DNA and generate varying proportions of single- and double-strand DNA breaks. The genome-wide responses were compared to those induced by the non-selective oxidant γ-radiation. Results Given well-controlled exposures that resulted in similar and minimal cell death (~20–25%) across all conditions, the extent of gene expression modulation was markedly different depending on treatment with the enediynes or γ-radiation. Exposure to γ-radiation resulted in more extensive transcriptional changes classified both by the number of genes modulated and the magnitude of change. Common biological responses were identified between the enediynes and γ-radiation, with the induction of DNA repair and stress response genes, and the repression of ribosomal biogenesis genes. Despite these common responses, a fraction of the response induced by gamma radiation was repressed by the enediynes and vise versa, suggesting that the enediyne response is not entirely "radiomimetic." Regression analysis identified 55 transcripts with gene expression induction associated both with double- or single-strand break formation. The S. cerevisiae "DNA damage signature" genes as defined by Gasch et al. 1 were enriched among regulated transcripts associated with single-strand breaks, while genes involved in cell cycle regulation were associated with double-strand breaks. Conclusion Dissection of the transcriptional response in yeast that is specifically signaled by DNA strand breaks has identified that single-strand breaks provide the signal for activation of transcripts encoding proteins involved in the DNA damage signature in S. cerevisiae, and double-strand breaks signal changes in cell cycle regulation genes.

Although it is well-established that irradiation of produce can reduce food-borne pathogens and spoilage organisms, data on the effect of irradiation on polymer additives in food packaging materials are limited, particularly for those additives used in packaging leafy greens or in current food packaging materials. We investigated the effects of irradiating a nucleating agent, aluminium, hydroxybis[2,4,8,10-tetrakis(1,1-dimethylethyl)-6-hydroxy-12H-dibenzo [d,g][1,3,2]dioxaphosphocin 6-oxidato]- (CAS Reg. No. 151841-65-5), at doses of 1-20 kGy in polypropylene. That nucleating agent was then extracted using accelerated solvent extraction and analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS), liquid chromatography-photodiode array detection (LC-PDA), and solid-state nuclear magnetic resonance (SSNMR) spectroscopy. We found this nucleating agent was not significantly affected by radiation treatment up to 20 kGy. Therefore, this nucleating agent could potentially be useful in food packaging materials that will be irradiated at doses of 20 kGy or less. Establishing which additives are stable under anticipated irradiation doses will help support safety evaluation of food packaging materials.

Phthalates are one of many chemical compounds that are used as plasticisers. Packaging can transfer plasticisers to the surfaces of foods or other materials. A recent study suggested a link between fast food consumption and increased urine phthalate metabolites even though phthalates are most commonly found in food contact materials made of PVC while fast food packaging is most commonly composed of paper and paper board. Phthalates in PVC are usually present in percent concentrations. In non-PVC food contact materials, such as paper or paperboard, the concentrations, if any, are expected to be significantly lower which can greatly impact the analytical method used for their determination. Due to the widespread use of plasticised PVC in many commercial applications, background concentrations of phthalates are a concern for trace concentration analyses and background contamination must be avoided when performing these analyses. A glassware cleaning method was developed and a solvent extraction with dichloromethane and hexane was used to extract phthalates from paper-based food packaging. The extracts were then analysed using a GC-MS/MS. The minimum reporting concentrations for the method were determined to be 0.10-0.40 µg/g depending on the phthalate investigated. Phthalate concentrations in several different non-PVC printed and unprinted packaging are presented. Of the 54 packaging samples tested, 10 samples contained no reportable concentrations of any of the 6 phthalates investigated. Of those that were reportable, all measured lower than 10 µg/g and in fact, most had concentrations less than 1 µg/g. These data demonstrate that phthalates from fast food packaging do not significantly contribute to overall consumer exposure.

Several food contact articles (FCAs) contaminated with unapproved brominated flame retardants (BFRs) purchased in the US market were analysed and subjected to migration tests. Migration tests were performed in food simulants (water, 3% acetic acid, 10% ethanol and 50% ethanol) and food (milk, coffee and chicken bouillon soup) to evaluate the BFRs mass transfer from the contaminated FCA. The BFRs studied, 2,4,6-tribromophenol (TBP), 3,3',5,5'-tetrabromobisphenol A (TBBPA), and 1,2,5,6,9,10-hexabromocyclododecane (HBCD) were analysed by UHPLC-MS/MS. The method validation parameters were r 2  ≥ 0.999, LOD ≤ 0.3 ng mL -1 , and RSD ≤ 1.7 % (n = 7). HBCD was not stable under our migration conditions and was not detected in any FCA, food or food simulant, including positive controls. Phenolic BFRs (TBP and TBBPA) migrated at concentrations ranging from non-detected to 73 µg kg -1 in food simulants, and from 1 to 23 µg kg -1 in food. Phenolic BFRs migrated into 50% ethanol food simulant at higher concentrations than in more aqueous food simulants and foods.

Rationale: Polyamide (PA) is the generic name of polymers synthesized by linking monomers via amide bonds, and various types of PAs with different monomer compositions are known. Distinguishing PA polymers is useful in directing monomer residual testing, product testing, and reverse engineering, but is analytically challenging and cumbersome. To simplify this, we explored the applicability of direct analysis in real time mass spectrometry (DART-MS) for screening PA polymers., Methods: A DART ion source coupled to a quadrupole Orbitrap (high-resolution (HR) mass spectrometer) was employed for this study. Ten types of PA polymers and four retail samples were evaluated. The DART-HRMS data for these samples, as well as the DART-MS/MS (MS 2 ) data for PA6 and PA66, were obtained, and their repeatability was assessed across days/calibrations, operators, and equipments., Results: Ions corresponding to the cyclic or linear monomers and oligomers of each PA polymer were detected in each DART-HR mass spectrum. Although similar DART-HR mass spectra were obtained for PA6, PA66, and PA6/PA66 (polymer blends of PA6 and PA66), their DART tandem mass spectra were completely different. The analysis was repeatable, and nearly identical DART tandem mass spectra were obtained on different days, by different operators, and with different equipment. This technique was successfully applied to commercially available samples., Conclusions: Ten types of PA polymers were distinguished using DART-HRMS and DART-MS 2 , and their identification using these techniques was straightforward as the characteristic ions for each PA polymer were identified and detected. Furthermore, the spectra were obtained rapidly. Therefore, DART-HRMS can be considered an efficient screening technique for the rapid identification and differentiation of PA polymers., (© 2019 John Wiley & Sons, Ltd.)

In this study, an accelerated migration test on food can coatings into food simulants was investigated. Food simulants covering a wide range of polarity were used to conduct migration tests at 60 °C with storage times ranging from 4 h to 30 days. Epoxy-resins, acrylic-phenolic, polyester, and vinyl coatings were exposed to water, 3% acetic acid, 50% ethanol, and Miglyol 812 ® . Using liquid chromatography coupled to a variety of detectors (UHPLC-Q-Orbitrap-MS, UFLC-MS/MS, and HPLC-DAD), migration of several monomers and previously identified oligomers, as well as some unidentified migrants, were determined during the experiment. The data from this study was compared to our findings from previous long-term migration studies with storage times ranging from 24 h to 540 days at 40 °C using the same can coating applications. The results illustrate that performing migration experiments for short time periods at 60 °C may mimic migration results that would be obtained at 40 °C after long-term migration tests (up to 1.5 years) from food can coatings into food simulants.

PVC is a common food contact material that is usually plasticised to increase its flexibility. Phthalates are one class of chemical compounds that are often used as plasticisers in PVC in a wide range of industries. They may be used in packaging materials for foods and can also be found in components of certain food processing equipment such as conveyor belts and tubing. Transfer of plasticisers from packaging to foods can occur. In recent years, there has been increased interest in understanding the health effects of phthalates, as well as the possible human exposure levels. However, there is limited information available about the routes of exposure to phthalates. In July 2014, the Chronic Hazard Advisory Panel (CHAP) produced a report for the U.S. Consumer Product Safety Commission detailing the potential health hazards of phthalates and phthalate alternatives. This report listed diet as one factor contributing greater than or equal to 10% of total phthalate exposure. As a result of this report, the U.S. Food and Drug Administration (FDA) is interested in determining the types of the primary plasticiser present in food packaging and processing materials as well as their concentrations. An investigation was conducted of 56 different samples of PVC food packaging and food processing materials available in the US market using a solvent extraction and GC-MS analysis. Nine different plasticisers including three phthalates, di(2-ethylhexyl) phthalate, diisononyl phthalate and diisodecyl phthalate, were identified in the products tested. The plasticiser concentrations ranged from 1 to 53% depending on the types of food contact materials and the type of plasticiser. Overall, it appears that manufacturers are switching away from phthalates as their primary plasticiser to alternate compounds such as ESBO, ATBC, DEHT, DINCH, DEHA and DINA.

A collaborative study was conducted to evaluate stable isotope dilution assay (SIDA) and LC-MS/MS for the simultaneous determination of aflatoxins B 1 , B 2 , G 1 , and G 2 ; deoxynivalenol; fumonisins B 1 , B 2 , and B 3 ; ochratoxin A; HT-2 toxin; T-2 toxin; and zearalenone in foods. Samples were fortified with 12 13 C uniformly labeled mycotoxins ( 13 C-IS) corresponding to the native mycotoxins and extracted with acetonitrile/water (50:50 v/v), followed by centrifugation, filtration, and LC-MS/MS analysis. In addition to certified reference materials, the six participating laboratories analyzed corn, peanut butter, and wheat flour fortified with the 12 mycotoxins at concentrations ranging from 1.0 to 1000 ng/g. Using their available LC-MS/MS platform, each laboratory developed in-house instrumental conditions for analysis. The majority of recoveries ranged from 80 to 120% with relative standard derivations (RSDs) <20%. Greater than 90% of the average recoveries of the participating laboratories were in the range of 90-110%, with repeatability RSD r (within laboratory) < 10% and reproducibility RSD R (among laboratory) < 15%. All Z scores of the results of certified reference materials were between -2 and 2. Using 13 C-IS eliminated the need for matrix-matched calibration standards for quantitation, simplified sample preparation, and achieved simultaneous identification and quantitation of multiple mycotoxins in a simple LC-MS/MS procedure.

Traditionally, migration testing during 10 days at 40 °C has been considered sufficient and appropriate for simulating the potential migration of substances from food-contact materials into foods. However, some packages, such as food cans, may be stored holding food for extended time periods (years). This study attempts to verify whether common testing conditions accurately estimate long-term migration. Two types of can coatings, epoxy and acrylic-phenolic, were subjected to short-term and long-term migration testing (1 day-1.5 years) using food simulants (water, 3% acetic acid, 50% ethanol, and isooctane) at 40 °C. Using HPLC-DAD/CAD, HPLC-MS, UHPLC-HRMS (where HRMS is accurate mass, mass spectrometry), and DART-HRMS, we identified potential migrants before starting the experiment: BPA, BADGE, BADGE derivatives, benzoguanamine, and other relevant marker compounds. During the experiment using a water-based food simulant, migrants remained stable. Most of the cans in contact with 3% acetic acid did not survive the experimental conditions. Tracked migrants were not detected in isooctane. In the presence of 50% ethanol, the traditional migration test during 10 days at 40 °C did not predict migration during long-term storage. These results suggest that migration protocols should be modified to account for long-term storage.

Cross-linked polyester resins are being introduced into the market as alternatives to epoxy resins as coatings for metal food cans. Identification of potential migrants, from these coatings into food, is a significant analytical challenge due to the diversity of substances employed in the manufacture of the coatings. However, such identification is required to assess migration from the can coating into the food and quantify dietary exposure. Polyester can coatings were extracted with acetonitrile at 40°C for 24h and the extracts were analyzed by a variety of analytical techniques, including GC-MS, HPLC-DAD/MS, HPLC-DAD/CAD and UHPL C-HRMS. Twenty nine non-volatile oligomers were tentatively identified using retention times, UV spectra, and accurate mass measurements. Identified oligomers suggest the coating in use for food cans is a polyester coating and is mainly based on the monomers isophthalic acid, terephthalic acid and nadic acid. To give confidence in the identification, one of the tentatively identified oligomer was synthetized and analyzed by (13)C and (1)H NMR and UHPL C-HRMS. The NMR and HRMS results, confirmed the presence of this compound in the can extracts. Finally, to determine if rapid, direct detection of the oligomers was practical, the coatings were analyzed by DART-HRMS. Twenty three out of the 29 oligomers were identified in the coating by direct measurement with DART-HRMS in few minutes., (Published by Elsevier B.V.)

FDA guidance for food contact substances recommends that for food packaging intended for use at sterilized, high temperature processed, or retorted conditions, a migration test with a retort step at 121 °C for 2 h followed by a 10 day migration test at 40 °C should be performed. These conditions are in intended to simulate processing and long-term storage. However, can coatings may be in contact with food for years, and there are very few data evaluating if this short-term testing accurately simulates migration over extended time periods. A long-term migration test at 40 °C with retorted and non-retorted polyester cans using several food simulants (water, 3% acetic acid, 10% ethanol, 50% ethanol, and isooctane) was conducted to verify whether traditional migration testing protocols accurately predict migration from food contact materials used for extended time periods. Time points were from 1 day to 515 days. HPLC-MS/MS was used to analyze polyester monomers, and oligomer migration was monitored using HPLC-DAD/CAD and HPLC-MS. Concentrations of monomers and oligomers increased during the migration experiments, especially in ethanol food simulants. The data suggest that current FDA migration protocols may need to be modified to address changes in migrants as a result of long-term storage conditions.

A simple, rapid and sensitive method for analyzing multi-target and non-target additives in polyvinyl chloride (PVC) food can coatings using ultra-high-performance liquid chromatography coupled to quadrupole-orbital ion-trap mass spectrometry was developed. This procedure was used to study the behaviour of a cross-linking agent, benzoguanamine (BGA), two slip agents, oleamide and erucamide, and 18 other commonly used plasticisers including phthalates, adipates, sebacates, acetyl tributyl citrate and epoxidised soybean or linseed oils. This optimised method was used to detect these analytes in food simulants (water and 3% acetic acid) in a long-term migration test of PVC-coated food cans for a period ranging from 1 day to 1.5 years at 40°C. Although very low detection limits (5 ng ml(-1)) were obtained for the majority of compounds, none of the monitored plasticisers and slip agents was detected in simulants extracted from cans over the period of the test. However, the presence of BGA in both aqueous food simulants was confirmed based on high-resolution mass spectrometry, product ion spectra and analysis of a reference standard. The BGA concentration in both simulants continued to increase with storage time: after 1.5 years storage in aqueous food simulants at 40°C, BGA was detected at concentrations up to 84 µg dm(-2). We believe this is the first study describing the long-term migration capacity of BGA from any vinyl coating material intended for use in PVC-coated food cans. Our results may have implications for migration test protocols for food cans that will be stored for extended time periods.

An improved, efficient, sensitive method for the determination of 14 non-nutritive sweeteners in food products was developed using electrospray ionisation (ESI) ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) in the negative-ion mode. Fourteen sweeteners and three internal standards were separated on a reversed-phase UHPLC column using a simple gradient programme. Analyte quantitation and confirmation were performed with data collection in multiple reaction monitoring (MRM) mode. Limits of detection (LODs) were determined in a representative drink, candy and yogurt sample and ranged from 0.1 to 1.8 ng ml(-1) (drinks) and from 0.1 to 2.5 ng g(-1) (candy and yogurt). Repeatability at the limit of quantitation (LOQ) ranged from 1% to 13% relative standard deviation (RSD). Twenty-seven commercially available food products were tested using the optimised method showing that the majority of products contained sweetener concentrations below their assigned maximum usable dose. Recovery studies were performed and accuracy data are presented.

The potential for consumer exposure to nano-components in food contact materials (FCMs) is dependent on the migration of nanomaterials into food. Therefore, characterising the physico-chemical properties and potential for migration of constituents is an important step in assessing the safety of FCMs. A number of commercially available food storage products, purchased domestically within the United States and internationally, that claim to contain nanosilver were evaluated. The products were made of polyethylene, polypropylene and polyphenylene ether sulfone and all contained silver (0.001-36 mg kg(-1) of polymer). Silver migration was measured under various conditions, including using 3% acetic acid and water as food simulants. Low concentrations (sub-ppb levels) of silver were detected in the migration studies generally following a trend characterised by a surface desorption phenomenon, where the majority of the silver migration occurred in the first of three consecutive exposures. Silver nanoparticles were not detected in food simulants, suggesting that the silver migration may be due solely to ionic silver released into solution from oxidation of the silver nanoparticle surface. The absence of detectable silver nanoparticles was consistent with expectations from a physico-chemical view point. For the products tested, current USFDA guidance for evaluating migration from FCMs was applicable.

A new analytical method has been developed and validated for the detection and quantification of 2-monochloropropanediol (2-MCPD) esters in edible oils. The target compounds are potentially carcinogenic contaminants formed during the processing of edible oils. As the 2-MCPD esters that occur most frequently in refined edible oils were not commercially available, standards were synthesized with identity and purity (95+%) confirmed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) and (1)H NMR. Target analytes are separated from edible oil matrices using a two-step solid-phase extraction (SPE) procedure. The extracts are then analyzed using LC-MS/MS with electrospray ionization (ESI). The method has been validated for 11 2-MCPD diesters and 3 2-MCPD monoesters in soybean oil, olive oil, and palm oil using an external calibration curve. The ranges of average recoveries and relative standard deviations (RSD) across the three oil matrices at three spiking concentrations are 79-106% (3-13% RSD) for the 2-MCPD diesters and 72-108% (4-17% RSD) for the 2-MCPD monoesters, with limits of quantitation at or below 30 ng/g for the diesters and 90 ng/g for the monoesters.

A fast and reliable LC-MS/MS method for the determination of cyclamate in a variety of food matrices was developed and validated. This method provides both quantitation and qualitative mass spectral determination important for analysis of regulatory samples. Utilization of a cyclamate-d11 internal standard corrects for potential matrix interferences during sample injection and allows minimal sample preparation. Seventeen commercially available food products were fortified at 250 μg/mL and tested as part of the method validation. Recoveries ranged from 72to 110%, with RSDs ranging from 3 to 15%. The linear range spanned 0.010-1.00 μg/mL. LODs were 0.1 and 0.6 ng/mL, determined in pomegranate juice and dried fig, respectively. LOQs were 0.3 and 1.6 ng/mL, which are significantly lower than needed to measure cyclamate when used as a food additive. The interday and intraday accuracy and precision data are presented. This method was validated for analysis of a variety of commonly adulterated products, including drinks, dried fruits, jams, and hard candies.

Stable isotope dilution with LC/MSIMS was used to determine the following 11 mycotoxins in food grade gums: aflatoxins B1, B2, G1, and G2; deoxynivalenol; fumonisins B1, B2, and B3; ochratoxin A; T-2 toxin; and zearalenone. Samples were fortified with 11 [13C]-uniformly labeled internal standard ([13C]-IS) mycotoxins that corresponded to the 11 target mycotoxins and extracted by acetonitrile-water (4 + 1, v/v), followed by LC/MS/MS analysis. Mycotoxins were quantitated with the fortified [13C]-IS in each sample. The average recoveries of aflatoxins B1, B2, G1, and G2 (1, 5, and 25 microg/kg); deoxynivalenol and fumonisins B1, B2, and B3 (25, 100, and 500 microg/kg); and ochratoxin A, T-2 toxin, and zearalenone (10, 50, and 250 microg/kg) ranged from 84 to 117% with RSDs less than 20%. Method-dependent LOQs were from 0.1 (aflatoxin B1) to 25 microg/kg (fumonisin B3). Among 20 market samples, aflatoxin B1 (< LOQ) was detected in a Guar gum and a Tragacanth gum, and zearalenone (6 +/- 0.6 microg/kg) was detected in a Xanthan gum. The detected mycotoxins were further confirmed by comparing their enhanced product ion spectra to those of reference standards. The single laboratory validated stable isotope dilution and LC/MSIMS method provides sufficient selectivity, sensitivity, accuracy, and reproducibility with a simple sample preparation to screen the 11 mycotoxins in gums.

Recent studies showed that headspace and purge and trap methods have limitations when used to determine volatile organic compounds (VOCs) in foods, including matrix effects and artifact formation from precursors present in the sample matrix or from thermal decomposition. U.S. Environmental Protection Agency Method 8261A liberates VOCs from the sample matrix by using vacuum distillation at room temperature. The method was modified and validated for the determination of furan, chloroform, benzene, trichloroethene, toluene, and sytrene in infant formula, canned tuna (in water), peanut butter, and an orange beverage (orange-flavored noncarbonated beverage). The validation studies showed that the LOQ values ranged from 0.05 ng/g toluene in infant formula to 5.10 ng/g toluene in peanut butter. Fortified recoveries were determined at the first, second, and third standard additions, and concentrations ranged from 0.07 to 6.9 ng/g. When quantified by the method of standard additions, the recoveries ranged from 56 to 218% at the first standard addition and 89 to 117% at the third. The validated method was used to conduct a survey of the targeted VOCs in 18 foods. The amounts found ranged from none detected to 73.8 ng/g furan in sweet potato baby food.

Primary aromatic amines (PAAs) are a group of substances with undesirable health effects, that are used in a variety of commercial products. Several recent studies, using a number of screening and confirmatory methods, have reported the migration of PAAs from some kitchen utensils into acetic acid 3% (w/v). Many of these methods require significant sample preparation, therefore the aim of this work was to determine if direct analysis in real time mass spectrometry (DART-MS) could be utilised as a rapid screening tool for the determination of PAAs in kitchen utensils. DART-MS results from direct analysis of the utensil have been compared with results of PAA migration by ultra high performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) method. The UPLC-MS/MS method had excellent linearity, appropriate sensitivity (LOD ≤ 1.5 µg L(-1); LOQ ≤ 4.5 µg L(-1)), repeatability from 2.4 to 13.2% and acceptable recoveries. DART-MS results were in good agreement with UPLC-MS/MS data, with 100% of non-compliant (PAA positive) samples successfully identified by DART-MS.

A rapid and sensitive analytical strategy for the simultaneous determination of twelve mycotoxins (aflatoxins, fumonisins, zearalenon, deoxynivalenol, ochratoxin A, T-2 and HT-2 toxins) using ultra-high performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS) was developed and validated. The method was validated for peanuts, barley and maize-breakfast cereals; selected as they represent the matrices most often contaminated by mycotoxins. The method is designed for fast and reliable analyses of mycotoxins in regulatory, industrial and private laboratories. Multi-target immunoaffinity columns containing antibodies for all mycotoxins studied herein were used for sample clean-up. Method optimization was predominantly focused on the simplification of extraction and clean-up procedure recommended by column producers. This newly developed and simplified procedure decreased both the sample preparation time and the solvent volumes used for their processing. The analysis of all regulated mycotoxins was conducted by a newly developed UHPLC-MS/MS method with a sample run time of only ten minutes. The method trueness was tested with analytical spikes and certified reference materials, with recoveries ranging from 71% to 112% for all of the examined mycotoxins., (Published by Elsevier B.V.)

This paper reports the validation and application of a method for determination of 10 perfluorochemicals (PFCs) in retail fish and shellfish. The analytes of interest were 7 perfluorinated carboxylates and 3 perfluorinated sulfonates. Fish and shellfish samples were digested with a basic solution of 10 mM sodium hydroxide in methanol before sonication and solid phase extraction through weak anion exchange. Analysis was performed using liquid chromatography-tandem mass spectrometry. Recoveries from spiking five different types of fish and shellfish indicate that the method performs similarly with different fish types, and recoveries were over 90% for all analytes. Forty-six retail samples, collected between 2010 and 2012, including 13 different types of fish and shellfish were analyzed for PFCs. The 13 different types included the top 10 most-consumed fish and shellfish in the United States according to data collected by the National Fisheries Institute. Two Standard Reference Materials were also analyzed. Most fish and shellfish had no detected PFCs; only 11 samples of the 46 tested had detectable concentrations of PFCs.

Between July 2008 and June 2012, the US Food and Drug Administration received 501 consumer reports of prolonged taste disturbances consistent with pine mouth syndrome. Consumers consistently reported a delayed bitter or metallic taste beginning hours to days following consumption of pine nuts that recurred with intake of any food or meal. This dysgeusia lasted in some cases up to a few weeks, but would eventually resolve without serious health consequences. To evaluate these reports, a questionnaire was developed to address various characteristics of the pine nuts consumed, pertinent medical history of complainants and other dysgeusia-related factors. Pine nut samples associated with 15 complaints were collected for analysis. The investigation of reports found no clear evidence of an underlying medical cause or common trigger that could adequately explain the occurrence of dysgeusia in complainants. Rather, the results of our investigation suggest that the occurrence of "pine mouth syndrome" in US consumers is correlated with the consumption of the pine nut species Pinus armandii., (Published by Elsevier Ltd.)

An ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method for the determination of 34 mycotoxins in dietary supplements containing green coffee bean (GCB) extracts was developed, evaluated, and used in the analysis of 50 commercial products. A QuEChERS-like procedure was used for isolation of target analytes from the examined matrices. Average recoveries of the analytes were in the range of 75-110%. The precision of the method expressed as relative standard deviation was below 12%. Limits of detection (LODs) and limits of quantitation (LOQs) ranged from 1.0 to 50.0 μg/kg and from 2.5 to 100 μg/kg, respectively. Due to matrix effects, the method of standard additions was used to ensure accurate quantitation. Ochratoxin A, ochratoxin B, fumonisin B1 and mycophenolic acid were found in 36%, 32%, 10%, and 16% of tested products, respectively. Mycotoxins occurred in the following concentration ranges: ochratoxin A, <1.0-136.9 μg/kg; ochratoxin B, <1.0-20.2 μg/kg; fumonisin B1, <50.0-415.0 μg/kg; mycophenolic acid, <5.0-395.0 μg/kg. High-resolution mass spectrometry operated in full MS and MS/MS mode was used to confirm the identities of the reported compounds.

A new analytical method has been developed and validated for the detection of glycidyl esters (GEs) and 3-monochloropropanediol (3-MCPD) monoesters in edible oils. The target compounds represent two classes of potentially carcinogenic chemical contaminants formed during the processing of edible oils. Target analytes are separated from edible oil matrices using a two-step solid-phase extraction (SPE) procedure. The extracts are then analyzed using liquid chromatography-tandem mass spectrometry (LC-MS/MS) with electrospray ionization (ESI). Chromatographic conditions that separate sn-1 and sn-2 monoesters of 3-MCPD have been developed for the first time. The method has been validated for GEs, sn-1 3-MCPD monoesters of lauric, myristic, linolenic, linoleic, oleic, and stearic acids, and sn-2 3-MCPD monoesters of oleic and palmitic acids in coconut, olive, and palm oils using an external calibration curve. The range of average recoveries and relative standard deviations (RSDs) across the three oil matrices at three spiking concentrations are 84-115% (3-16% RSD) for the GEs, 95-113% (1-10% RSD) for the sn-1 3-MCPD monoesters, and 76.8-103% (5.1-11.2% RSD) for the sn-2 3-MCPD monoesters, with limits of quantitation at or below 30 ng/g for the GEs, 60 ng/g for sn-1 3-MCPD monoesters, and 180 ng/g for sn-2 3-MCPD monoesters.

A method was developed and validated for the detection of fatty acid diesters of 2-monochloropropanediol (2-MCPD) and 3-monochloropropanediol (3-MCPD) in edible oils. These analytes are potentially carcinogenic chemical contaminants formed during edible oil processing. After separation from oil matrices using a two-step solid-phase extraction (SPE) procedure, the target compounds are quantitated using liquid chromatography-tandem mass spectrometry (LC-MS/MS) with electrospray ionization (ESI). The first chromatographic conditions have been developed that separate intact diesters of 2-MCPD and 3-MCPD, allowing for their individual quantitation. The method has been validated for 28 3-MCPD diesters of lauric, myristic, palmitic, linolenic, linoleic, oleic, and stearic acids in coconut, olive, and palm oils, as well as 3 2-MCPD diesters, using an external calibration curve. The range of average recoveries and relative standard deviations (RSDs) across the three oil matrices at three spiking concentrations are 88-118% (2-16% RSD) with maximum limits of quantitation of 30 ng/g (ppb).

Investigations into the biodegradation potential of perfluorooctane sulfonate (PFOS)-precursor candidates have focused on low molecular weight substances (e.g., N-ethyl perfluorooctane sulfonamido ethanol (EtFOSE)) in wastewater treatment plant sludge. Few data are available on PFOS-precursor biodegradation in other environmental compartments, and nothing is known about the stability of high-molecular-weight perfluorooctane sulfonamide-based substances such as the EtFOSE-based phosphate diester (SAmPAP diester) in any environmental compartment. In the present work, the biodegradation potential of SAmPAP diester and EtFOSE by bacteria in marine sediments was evaluated over 120 days at 4 and 25 °C. At both temperatures, EtFOSE was transformed to a suite of products, including N-ethyl perfluorooctane sulfonamidoacetate, perfluorooctane sulfonamidoacetate, N-ethyl perfluorooctane sulfonamide, perfluorooctane sulfonamide, and perfluorooctane sulfonate. Transformation was significantly more rapid at 25 °C (t(1/2) = 44 ± 3.4 days; error represents standard error of the mean (SEM)) compared to 4 °C (t(1/2) = 160 ± 17 days), but much longer than previous biodegradation studies involving EtFOSE in sludge (t(1/2) ∼0.7-4.2 days). In contrast, SAmPAP diester was highly recalcitrant to microbial degradation, with negligible loss and/or associated product formation observed after 120 days at both temperatures, and an estimated half-life of >380 days at 25 °C (estimated using the lower bounds 95% confidence interval of the slope). We hypothesize that the hydrophobicity of SAmPAP diester reduces its bioavailability, thus limiting biotransformation by bacteria in sediments. The lengthy biodegradation half-life of EtFOSE and recalcitrant nature of SAmPAP diester in part explains the elevated concentrations of PFOS-precursors observed in urban marine sediments from Canada, Japan, and the U.S, over a decade after phase-out of their production and commercial application in these countries.

A broad range of fluorochemicals is used to impart oil and water barrier properties to paper and paperboard food packaging. Many of the fluorochemicals are applied to paper and paperboard as complex mixtures containing reaction products and by-products and unreacted starting materials. This work primarily focussed on the determination of seven perfluorocarboxylic acids (PFCAs) in two commercially available food contact papers: a di-perfluoro-alkyloxy-amino-acid and a perfluoroalkyl phosphate surfactant. In addition, the migration of the PFCAs into five food simulants from two commercial packages was evaluated. All seven PFCAs were detected in the range of 700-2220 µg kg⁻¹ of paper, while three perfluoroalkyl sulphonates were under the LOD. Results from migration tests showed that migration depends on paper characteristics, time and food simulant. The percentage of migration after 10 days at 40°C ranged from 4.8% to 100% for the two papers and different food simulants.

Fatty acid esters of 3-monochloropropanediol (3-MCPD) and glycidol are processing contaminants found in a wide range of edible oils. While both 3 MCPD and glycidol have toxicological properties that at present has concerns for food safety, the published occurrence data are limited. Occurrence information is presented for the concentrations of 3-MCPD and glycidyl esters in 116 retail and/or industrial edible oils and fats using LC-MS/MS analysis of intact esters. The concentrations for bound 3-MCPD ranged from below the limit of quantitation (

Direct analysis in real time coupled to time-of-flight mass spectrometry (DART/TOF-MS) was used to detect the non-visible set-off of photoinitiators on the food contact surface of three different packages. The samples were intentionally under-cured to provoke set-off. Twelve commercially available photoinitiators were included in the ink formulations including α-amino-, morpholino, and α-hydroxy benzophenones, thioxanthones, aryl-phosphine oxide and three polymeric versions of these. Major colours of the packages' prints were analysed, as well as the specific areas of the inner surface in contact with them. Larger quantities of photoinitiators were detected on the food contact areas in contact with the darker colours of the images. Speed-cure 7005 and 4-phenylbenzophenone were the compounds most susceptible to set-off in each of the samples by DART response. An identification protocol for unknown set-off compounds was tested, resulting in the set-off detection of diethylene glycol ethers, erucamide and acrylates, and confirmed by solvent extraction GC-MS analysis. Finally, DART/TOF-MS was scanned across transects of the food contact side of packages to map the presence of photoinitiators. Higher photoinitiator signals were observed in patterns corresponding to the printed image, suggesting DART/TOF-MS might "image" print set-off.

A pressurised solvent extraction procedure coupled with a gas chromatography-mass spectrometry-selective ion monitoring (GC-MS-SIM) method was developed to determine three cyclic siloxanes, octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), dodecamethylcyclohexasiloxane (D6) and three linear siloxanes, octamethyltrisiloxane (L3), decamethyltetrasiloxane (L4), dodecamethylpentasiloxane (L5), in silicone products. Additionally, two different extraction methods were developed to measure these siloxanes migrating into milk, infant formula and liquid simulants (50 and 95% ethanol in water). The limits of quantification (LOQs) of the six siloxanes ranged from 6 ng/g (L3) to 15 ng/g (D6). Silicone nipples and silicone bakewares were extracted using pressurised solvent extraction (PSE) and analysed using the GC-MS-SIM method. No linear siloxanes were detected in the silicone nipple samples analysed. The three cyclic siloxanes (D4, D5 and D6) were detected in all silicone nipple samples with concentrations ranging from 0.5 to 269 µg/g. In the bakeware samples, except for L3, the other five siloxanes were detected with concentrations ranging from 0.2 µg/g (L4) to 7030 µg/g (D6). To investigate the potential migration of the six siloxanes from silicone nipples to milk and infant formula, a liquid extraction and dispersive clean-up procedure was developed for the two matrices. The procedure used a mix of hexane and ethyl acetate (1 : 1, v/v) as extraction solvent and C₁₈ powder as the dispersive clean-up sorbent. For the liquid simulants, extraction of the siloxanes was achieved using hexane without any salting out or clean-up procedures. The recoveries of the six siloxanes from the milk, infant formula and simulants fortified at 50, 100, 200, 500 and 1000 µg/l ranged from 70 to 120% with a relative standard derivation (RSD) of less than 15% (n = 4). Migration tests were performed by exposing milk, infant formula and the liquid simulants to silicone baking sheets with known concentrations of the six siloxanes at 40°C. No siloxanes were detected in milk or infant formula after 6 h of direct contact with the silicone baking sheet plaques, indicating insignificant migration of the siloxanes to milk or infant formula. Migration tests in the two simulants lasted up to 72 h and the three cyclic siloxanes were detected in 50% ethanol after an 8-h exposure and after 2 h in 95% ethanol. The highest detected concentrations of D4, D5 and D6 were 42, 36 and 155 ng/ml, respectively, indicating very limited migration of D4, D5 or D6 into the two simulants.

Set-off is the unintentional transfer of substances used in printing from the external printed surface of food packaging to the inner, food-contact surface. Ambient ionization-accurate mass spectrometry (AMI-AMS) detected and identified compounds from print set-off not visible to the human eye. AMI mass spectra from inner and outer surfaces of printed and nonprinted food packaging were compared to detect and identify nonvisible set-off components. A protocol to identify unknowns was developed using a custom open-source database of printing inks and food-packaging compounds. The protocol matched print-related food-contact surface ions with the molecular formulas of common ions, isotopes, and fragments of compounds from the database. AMI-AMS was able to detect print set-off and identify seven different compounds. Set-off on the packaging samples was confirmed using gas chromatographic-mass spectrometric (GC-MS) analysis of single-sided solvent extracts. N-Ethyl-2(and 4)-methylbenzenesulfonamide, 2,4-diphenyl-4-methyl-1(and 2)-pentene, and 2,4,7,9-tetramethyl-5-decyne-4,7-diol were present on the food-contact layer at concentrations from 0.21 to 2.7 ± 1.6 μg dm⁻², corresponding to nearly milligram per kilogram concentrations in the packaged food. Other minor set-off compounds were detected only by AMI-AMS, a fast, simple, and thorough technique to detect and identify set-off in food packaging.

This study describes a new method developed for detection of 10 different perfluorochemicals (PFCs) in cow's milk, seven perfluorinated carboxylates and three perfluorinated sulfonate salts. After attempting multiple methods employing both acidic and basic extractions, a basic extraction using 10 mM sodium hydroxide in methanol digestion along with weak anion-exchange solid-phase extraction was employed. Vortex mixing and varying sonication times were compared as part of sample processing. Results show that sonication during sample processing yield decreased recovery of longer chain perfluorinated carboxylates. The final method developed was used to determine the concentration of PFCs in 12 raw and 49 retail milk samples from across the United States. With the exception of a single raw milk sample obtained from a dairy farm that had applied PFC containing biosolids to its fields, there were no milk samples containing PFCs.

A new analytical method was developed to determine the presence of six (6) compounds with the potential to be used in economic adulteration to enhance the nitrogen content in milk products and bulk proteins. Residues were extracted from the matrix with 2% formic acid, after which acetonitrile (ACN) was added to induce precipitation of the proteins. Extracts were analyzed by liquid chromatography using a ZIC-HILIC column with tandem mass spectrometry (LC-MS/MS) using electrospray ionization (ESI). Single-laboratory method validation data was collected in six matrices fortified at concentrations down to 1.0 μg/g (ppm). Average recoveries and average relative standard deviations (RSD) using spiked matrix calibration standard curves were the following: cyromazine (CY) 95.9% (7.5% RSD), dicyandiamide (DC) 98.1% (5.6% RSD), urea 102.5% (8.6% RSD), biuret (BU) 97.2% (6.6% RSD), triuret (TU) 97.7% (5.7% RSD), and amidinourea (AU) 93.4% (7.4% RSD). This method provides a rapid and effective approach to proactively combat economically motivated adulteration in protein-containing products., (Published by Elsevier B.V.)

A direct, versatile method for the determination of steviol and nine steviol glycosides in food products has been developed by using electrospray ionisation liquid chromatography-mass spectrometry in the negative-ion mode. Ten stevia compounds were readily separated on an amino column by using a gradient separation. Data for analyte quantification were collected in the selected ion monitoring mode, giving the method limit of detection of 0.01-0.34 µg g⁻¹ and repeatability at the limit of quantitation of 2%-15% relative standard deviation. Thirty-four commercially available food products were tested by using the optimised method, and in these products rebaudioside A and stevioside comprised 52%-100% of the total steviol glycosides. Multiple reaction monitoring data were collected to provide analyte confirmation. Stability data for rebaudioside A stored at room temperature, 40°C and 60°C over a period of 1-14 days are shown.

Pine nuts are a part of traditional cooking in many parts of the world and have seen a significant increase in availability/use in the United States over the past 10 years. The U.S. Food and Drug Administration (US FDA) field offices received 411 complaints from U.S. consumers over the past three years regarding taste disturbances following the consumption of pine nuts. Using analysis of fatty acids by gas chromatography with flame ionization detection, previous reports have implicated nuts from Pinus armandii (Armand Pine) as the causative species for similar taste disturbances. This method was found to provide insufficient species resolution to link FDA consumer complaint samples to a single species of pine, particularly when samples contained species mixtures of pine nuts. Here we describe a DNA based method for differentiating pine nut samples using the ycf1 chloroplast gene. Although the exact cause of pine nut associated dysgeusia is still not known, we found that 15 of 15 samples from consumer complaints contained at least some Pinus armandii, confirming the apparent association of this species with taste disturbances.

Metal food and drink cans are commonly coated with epoxy films made from phenolic polymers produced from bisphenol A (BPA). It is well established that residual BPA monomer migrates into can contents during processing and storage. While a number of studies have reported BPA concentrations in foods from foreign markets and specialty foods on the U.S. market, very few peer-reviewed data for the BPA concentrations in canned food from the U.S. market were available. This study quantified BPA concentrations in 78 canned and two frozen food products from the U.S. market using an adaptation of a previously reported liquid chromatography-tandem mass spectrometry method. The tested products represented 16 different food types that are from the can food classifications that constitute approximately 65% of U.S. canned food sales and canned food consumption. BPA was detected in 71 of the 78 canned food samples but was not detected in either of the two frozen food samples. Detectable BPA concentrations across all foods ranged from 2.6 to 730 ng/g. Large variations in BPA concentrations were found between different products of the same food type and between different lots of the same product. Given the large concentration ranges, the only distinguishable trend was that fruits and tuna showed the lowest BPA concentrations. Experiments with fortified frozen vegetables and brine solutions, as well as higher BPA concentrations in canned food solids over liquid portions, clearly indicated that BPA partitions into the solid portion of foods.

Two unknown compounds were previously determined to be potential interferences in liquid chromatography/tandem mass spectrometry (LC/MS/MS) analysis of bisphenol A (BPA) in canned infant formula. Both yielded two identical MS/MS transitions to BPA. The identities of the unknowns were investigated using accurate mass LC/MS, LC/MS/MS, and elemental formula and structures proposed. Exact identities were confirmed through purification or synthesis followed by (1)H and (13)C nuclear magnetic resonance (NMR) experiments, as well as comparisons of one unknown with commercial standards. Comparisons of negative ion electrospray ionization (ESI) MS/MS and accurate mass spectra suggested both unknowns to be structurally identical (to BPA and each other). Positive ion ESI spectra confirmed both were larger molecules, suggesting that in the negative mode they likely fragmented to the deprotonated BPA ion in the source [corrected]. Elemental composition of positive ion accurate mass spectra and NMR analysis concluded the unknowns were oxidized forms of the known epoxy can coating monomer, bisphenol A diglycidyl ether (BADGE). One of the unknowns, 2,2-[bis-4-(2,3-dihydroxypropoxy)phenyl]propane, commonly known as BADGE*2H(2)O, is widely reported as an epoxy-phenolic can coating migrant, but has not been suggested to interfere with the MS/MS analysis of BPA. The other unknown, 2-[4-(2,3-dihydroxypropoxy)phenyl]-2-[4'-hydroxyphenyl]propane, or the oxidized form of bisphenol A monoglycidyl ether (BAMGE*H(2)O), has not been previously reported in food or packaging., (Published in 2011 by John Wiley & Sons, Ltd.)

Under certain conditions, benzene can form in beverages containing benzoic and ascorbic acids. The American Beverage Assn. (ABA) has published guidelines to help manufacturers mitigate benzene formation in beverages. These guidelines recommend accelerated testing conditions to test product formulations, because exposure to ultraviolet (UV) light and elevated temperature over the shelf life of the beverage may result in benzene formation in products containing benzoic and ascorbic acids. In this study, the effects of UVA exposure on benzene formation were determined. Benzene formation was examined for samples contained in UV stabilized and non-UV stabilized packaging. Additionally, the usefulness of accelerated thermal testing to simulate end of shelf-life benzene formation was evaluated for samples containing either benzoic or ascorbic acid, or both. The 24 h studies showed that under intense UVA light benzene levels increased by as much as 53% in model solutions stored in non-UV stabilized bottles, whereas the use of UV stabilized polyethylene terephthalate bottles reduced benzene formation by about 13% relative to the non-UV stabilized bottles. Similar trends were observed for the 7 d study. Retail beverages and positive and negative controls were used to study the accelerated thermal testing conditions. The amount of benzene found in the positive controls and cranberry juice suggests that testing at 40 degrees C for 14 d may more reliably simulate end of shelf-life benzene formation in beverages. Except for cranberry juice, retail beverages were not found to contain detectable amounts of benzene (<0.05 ng/g) at the end of their shelf lives.

An updated survey of U.S. infant formula was conducted to determine the concentrations of bisphenol A (BPA). The purpose was to accurately assess BPA concentrations across the infant formula market, accounting for lot variability, and determine if geographic location or can age influences BPA concentrations. A method was developed to measure BPA in formula utilizing isotope dilution, solid-phase extraction, and liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The method was tested and found to be reproducible (10% relative standard deviation), reliable (47 +/- 1% recovery), and sensitive (0.15 ng g(-1) method detection limit). Over 160 analyses were conducted using 104 formula containers representing 36 products. Samples from U.S. east and west coast markets demonstrated no significant difference, and concentrations in older cans were not higher. BPA concentrations in liquid formula (0.48-11 ng g(-1)) were consistent with previous studies, and BPA was detected in only 1 of 14 powder formula products analyzed.

The ambient ionization technique direct analysis in real time (DART) was characterized and evaluated for the screening of food packaging for the presence of packaging additives using a benchtop mass spectrometer (MS). Approximate optimum conditions were determined for 13 common food-packaging additives, including plasticizers, anti-oxidants, colorants, grease-proofers, and ultraviolet light stabilizers. Method sensitivity and linearity were evaluated using solutions and characterized polymer samples. Additionally, the response of a model additive (di-ethyl-hexyl-phthalate) was examined across a range of sample positions, DART, and MS conditions (temperature, voltage and helium flow). Under optimal conditions, molecular ion (M+H+) was the major ion for most additives. Additive responses were highly sensitive to sample and DART source orientation, as well as to DART flow rates, temperatures, and MS inlet voltages, respectively. DART-MS response was neither consistently linear nor quantitative in this setting, and sensitivity varied by additive. All additives studied were rapidly identified in multiple food-packaging materials by DART-MS/MS, suggesting this technique can be used to screen food packaging rapidly. However, method sensitivity and quantitation requires further study and improvement.

A gas chromatography-ion-trap tandem mass spectrometry procedure was developed for the determination of 2,6-diisopropylnaphthalene (DIPN) and n-dibutylphthalate (DBP) in domestic and imported paper packages and food sold in US marketplaces. The procedure involved ultrasonic extraction with dichloromethane, followed by analysis with the gas chromatography-ion-trap tandem mass spectrometry. Calibration curves for DIPN and DBP were achieved with concentrations ranging from 0.01 to 10 microg ml(-1) and the corresponding r(2) values were 0.9976 and 0.9956, respectively. In most of the fortified samples the recoveries were higher than 80% with a relative standard deviation (RSD) <10%. Using this procedure, it was found that less than 20% of the tested domestic packages and more than 60% of the tested imported food packages contained both DIPN and DBP. The concentrations of DIPN and DBP ranged from 0.09 to 20 mg kg(-1) and 0.14 to 55 mg kg(-1), respectively, with most of the DINP and DBP levels lower than 20 mg kg(-1). DIPN was not detected (<0.01 mg kg(-1)) in 41 food samples and DBP was only detected in two domestic and four imported food samples with concentrations ranging from <0.01 to 0.81 mg kg(-1).

The migration behaviour of polymer additives in 17 polypropylene (PP) samples is described. These samples cover the major types of PP used in food packaging. The diffusion coefficients of additives with relatively small molecular masses, M(r) = 136 (limonene), as well as the migration of typical antioxidants used in PP up to M(r) = 1178 (IRGANOX 1010), were measured at different temperatures. In addition, the diffusion data and percentages of xylene-soluble fractions were correlated. This enables a prediction of the migration behaviour of a PP sample by testing its 'isotactic index' with xylene. The results clearly indicate that PP can be subdivided, from the migration point of view, into the monophasic homopolymer (h-PP), the monophasic random copolymer (r-PP), and the heterophasic copolymer (heco-PP). The diffusion coefficients for r-PP are at least one order of magnitude higher than those of h-PP and comparable with the values for heco-PP. Upper limits for the diffusion values can be calculated based on the safety margin required by consumer protection laws.

Diacetyl (2,3-butanedione) is a yellowish liquid that is usually mixed with other ingredients to produce butter flavor or other flavors in a variety of food products. Inhalation of butter flavoring vapors was first associated with clinical bronchiolitis obliterans among workers in microwave popcorn production. Recent findings have shown irreversible obstructive lung disease among workers not only in the microwave popcorn industry, but also in flavoring manufacture, and in chemical synthesis of diacetyl, a predominant chemical for butter flavoring. It has been reported that perfluorochemicals utilized in food packaging are migrating into foods and may be sources of oral exposure. Relatively small quantities of perfluorochemicals are used in the manufacturing of paper or paperboard that is in direct contact with food to repel oil or grease and water. Because of recent concerns about perfluorochemicals such as those found on microwave popcorn bags (e.g. Lodyne P208E) and diacetyl in foods, we evaluated both compounds for mutagenicity using the mammalian cell gene mutation assay in L5178Y mouse lymphoma cells. Lodyne P208E was less toxic than diacetyl and did not induce a mutagenic response. Diacetyl induced a highly mutagenic response in the L5178Y mouse lymphoma mutation assay in the presence of human liver S9 for activation. The increase in the frequency of small colonies in the assay with diacetyl indicates that diacetyl causes damage to multiple loci on chromosome 11 in addition to functional loss of the thymidine kinase locus.

Azodicarbonamide, an approved food additive, is commonly used as a flour additive and dough conditioner in the United States and Canada. A number of researchers have clearly established a link between the use of azodicarbonamide and semicarbazide contamination in commercial bread products. However, all of these studies have primarily focused on the final baked product and have not extensively investigated the processing and conditions that affect the final semicarbazide levels. In this study, a previously developed method for measuring free semicarbazide in bread was applied to dough samples during the mixing and kneading process. Additionally, flour and bread samples were spiked with biurea or azodicarbonamide to help elucidate semicarbazide formation pathways. The results showed that semicarbazide was not formed as a byproduct of azodicarbonamide decomposition to biurea, which occurs upon the addition of water. Indeed, semicarbazide was not detected after room temperature or elevated temperature dough maturation, but only after baking. It was concluded that although azodicarbonamide is the initial starting material, semicarbazide formation in bread occurs through a stable intermediate, biurea.

Fluorochemical-treated paper was tested to determine the amount of migration that occurs into foods and food-simulating liquids and the characteristics of the migration. Migration characteristics of fluorochemicals from paper were examined in Miglyol, butter, water, vinegar, water-ethanol solutions, emulsions and pure oil containing small amounts of emulsifiers. Additionally, microwave popcorn and chocolate spread were used to investigate migration. Results indicate that fluorochemicals paper additives do migrate to food during actual package use. For example, we found that microwave popcorn contained 3.2 fluorochemical mg kg(-1) popcorn after popping and butter contained 0.1 mg kg(-1) after 40 days at 4 degrees C. Tests also indicate that common food-simulating liquids for migration testing and package material evaluation might not provide an accurate indication of the amount of fluorochemical that actually migrates to food. Tests show that oil containing small amounts of an emulsifier can significantly enhance migration of a fluorochemical from paper.

Irganox 1076 (IN1076) and Irganox 1010 (IN1010), phenol containing species often used as antioxidant additives in food packaging polymers have both hydrophilic and hydrophobic functional groups. Consequently these additives are likely to absorb to surfaces where their free energy is minimized. Experiments described in this work examine the two-dimensional phase behavior and vibrational structure of IN1076 and IN1010 films adsorbed to the air/water interface. Surface pressure isotherms show that repeated compression of these films leads to continued irreversible loss of molecules and that on a per molecule basis, this loss is more pronounced for IN1076 than for IN1010. Differences in the surface properties of these two antioxidant additives are interpreted based on differences in molecular structure. Surface specific vibrational measurements of these organic films show very little conformational order, implying that even when closely packed, both antioxidant species have little affinity for forming highly organized domains. These findings have important ramifications for mechanisms that reduce antioxidant activity in polymers as well as descriptions of antioxidant blooming on polymer surfaces.

A rapid quantitative method and a qualitative confirmatory method for the determination of monofluoroacetic acid (MFA) in complex food matrices are presented. The quantitative method utilizes a water extraction, solid phase extraction clean-up and liquid chromatography-mass spectrometry (LC-MS) for determination of MFA. This method showed a high degree of specificity, detecting MFA in all of the spiked samples, while none of the unfortified samples tested positive for MFA. Spike recoveries were high in all matrices analyzed, varying from 85 to 110%, and comparable at low (2mg/L) and high (20mg/L) spiking levels. Repeatability tests at the low spiking levels yielded RSDs of less than 5% for all matrices analyzed. The qualitative confirmatory method developed is conceptually different from the quantitative method, ensuring that both methods would not be subject to the same interferences. The method uses the formation of the hydrazide of MFA through derivatization with 2-nitrophenylhydrazine. This derivatization is well established for the determination of carboxylic acids, but this is the first application to the determination of MFA. The derivatization yield was matrix dependent, however the limit of detection (LOD) (0.8microg/L) was sufficient to confirm the presence of MFA in all spiked matrices. Repeatability tests at the low spiking levels yielded RSDs of approximately 7% for all matrices analyzed.

Diffusion coefficients of limonene in various linear low-density polyethylene (LLDPE) and low-density polyethylene (LDPE) resins have been determined from sorption data using a thermogravimetric methodology. From these data, one can determine whether polymer synthesis parameters such as the choice of catalytic process or co-monomer result in substantial differences in how much food packaging additives might migrate to food. For example, LLDPE is currently manufactured using either one of two distinct catalytic processes: Ziegler-Natta (ZN) and metallocene, a single-site catalyst. ZN catalysis is a heterogeneous process that has dominated polyolefin synthesis over the last half-century. It involves a transition metal compound containing a metal-carbon bond that can handle repeated insertion of olefin units. In contrast, metallocene catalysis has fewer than 20 years of history, but has generated much interest due to its ability to produce highly stereospecific polymers at a very high yield. In addition to high stereospecificity, metallocene-catalysed polymers are significantly lower in polydispersity than traditional ZN counterparts. Absorption and desorption testing of heat-pressed films made from LLDPE and LDPE resins of varying processing parameters indicates that diffusion coefficients of limonene in these resins do not change substantially.

Perfluorochemicals are widely used in the manufacturing and processing of a vast array of consumer goods, including electrical wiring, clothing, household and automotive products. Furthermore, relatively small quantities of perfluorochemicals are also used in the manufacturing of food-contact substances that represent potential sources of oral exposure to these chemicals. The most recognizable products to consumers are the uses of perfluorochemicals in non-stick coatings (polytetrafluoroethylene (PTFE)) for cookware and also their use in paper coatings for oil and moisture resistance. Recent epidemiology studies have demonstrated the presence of two particular perfluorochemicals, perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) in human serum at very low part per billion levels. These perfluorochemicals are biopersistent and are the subject of numerous studies investigating the many possible sources of human exposure. Among the various uses of these two chemicals, PFOS is a residual impurity in some paper coatings used for food contact and PFOA is a processing aid in the manufacture of PTFE used for many purposes including non-stick cookware. Little information is available on the types of perfluorochemicals that have the potential to migrate from perfluoro coatings into food. One obstacle to studying migration is the difficulty in measuring perfluorochemicals by routine conventional analytical techniques such as GC/MS or LC-UV. Many perfluorochemicals used in food-contact substances are not detectable by these conventional methods. As liquid chromatography-mass spectrometry (LC/MS) develops into a routine analytical technique, potential migrants from perfluoro coatings can be more easily characterized. In this paper, data will be presented on the types of perfluoro chemicals that are used in food packaging and cookware. Additionally, research will be presented on the migration or potential for migration of these chemicals into foods or food simulating liquids. Results from migration tests show mg kg(-1) amounts of perfluoro paper additives/coatings transfer to food oil. Analysis of PTFE cookware shows residual amounts of PFOA in the low microg kg(-1) range. PFOA is present in microwave popcorn bag paper at amounts as high as 300 microg kg(-1).