Search

Using Si as anode materials for Li-ion batteries remain challenging due to its morphological evolution and SEI modification upon cycling. The present work aims at developing a composite consisting of carbon-coated Si nanoparticles (Si@C NPs) intimately embedded in a three-dimensional (3D) graphene hydrogel (GHG) architecture to stabilize Si inside LiB electrodes. Instead of simply mixing both components, the novelty of the synthesis procedure lies in the in situ hydrothermal process, which was shown to successfully yield graphene oxide reduction, 3D graphene assembly production, and homogeneous distribution of Si@C NPs in the GHG matrix. Electrochemical characterizations in half-cells, on electrodes not containing additional conductive additive, revealed the importance of the protective C shell to achieve high specific capacity (up to 2200 mAh.g−1), along with good stability (200 cycles with an average Ceff > 99%). These performances are far superior to that of electrodes made with non-C-coated Si NPs or prepared by mixing both components. These observations highlight the synergetic effects of C shell on Si NPs, and of the single-step in situ preparation that enables the yield of a Si@C-GHG hybrid composite with physicochemical, structural, and morphological properties promoting sample conductivity and Li-ion diffusion pathways. [ABSTRACT FROM AUTHOR]

Determining the affinity of proteins for uranyl is key to understand the toxicity of this cation and to further develop decorporation strategies. However, usual techniques to achieve that goal often require specific equipment and expertise. Here, we propose a simple, efficient, fluorescence‐based method to assess the affinity of proteins and peptides for uranyl, at equilibrium and in buffered solution. We first designed and characterized an original uranyl‐binding fluorescent probe. We then built a reference scale for uranyl affinity in solution, relying on signal quenching of our fluorescent probe in presence of high‐affinity uranyl‐binding peptides. We finally validated our approach by re‐evaluating the uranyl‐binding affinity of four native proteins. We envision that this tool will facilitate the reliable and reproducible assessment of affinities of peptides and proteins for uranyl. [ABSTRACT FROM AUTHOR]

Determining the affinity of proteins for uranyl is key to understand the toxicity of this cation and to further develop decorporation strategies. However, usual techniques to achieve that goal often require specific equipment and expertise. Here, we propose a simple, efficient, fluorescence‐based method to assess the affinity of proteins and peptides for uranyl, at equilibrium and in buffered solution. We first designed and characterized an original uranyl‐binding fluorescent probe. We then built a reference scale for uranyl affinity in solution, relying on signal quenching of our fluorescent probe in presence of high‐affinity uranyl‐binding peptides. We finally validated our approach by re‐evaluating the uranyl‐binding affinity of four native proteins. We envision that this tool will facilitate the reliable and reproducible assessment of affinities of peptides and proteins for uranyl. [ABSTRACT FROM AUTHOR]

The synthesis of several thiazonaphthalimide derivatives is described. The exclusive formation of angular rather than linear isomers was unequivocally demonstrated by NMR and single crystal X-ray diffraction. Their photophysical properties and ability to bind calf-Thymus DNA with affinities in the range of 10 4 makes them interesting candidates to probe DNA by fluorescence. [ABSTRACT FROM AUTHOR]

Determining the affinity of proteins for uranyl is key to understand the toxicity of this cation and to further develop decorporation strategies. However, usual techniques to achieve that goal often require specific equipment and expertise. Here, we propose a simple, efficient, fluorescence‐based method to assess the affinity of proteins and peptides for uranyl, at equilibrium and in buffered solution. We first designed and characterized an original uranyl‐binding fluorescent probe. We then built a reference scale for uranyl affinity in solution, relying on signal quenching of our fluorescent probe in presence of high‐affinity uranyl‐binding peptides. We finally validated our approach by re‐evaluating the uranyl‐binding affinity of four native proteins. We envision that this tool will facilitate the reliable and reproducible assessment of affinities of peptides and proteins for uranyl. [ABSTRACT FROM AUTHOR]

Supercapacitors offer high power densities but require further improvements in energy densities for widespread commercial applications. In addition to the conventional strategy of using large surface area materials to enhance energy storage, recently, matching electrolyte ion sizes to material pore sizes has been shown to be particularly effective. However, synthesis and characterization of materials with precise pore sizes remain challenging. Herein, we propose to evaluate the layered structures in graphene derivatives as being analogous to pores and study the possibility of ion sieving. A class of pillared graphene based materials with suitable interlayer separation were synthesized, readily characterized by X-ray diffraction, and tested in various electrolytes. Electrochemical results show that the interlayer galleries could indeed sieve electrolyte ions based on size constrictions: ions with naked sizes that are smaller than the interlayer separation access the galleries, whereas the larger ions are restricted. These first observations of ion sieving in pillared graphene-based materials enable efficient charge storage through optimization of the d-spacing/ion size couple. [ABSTRACT FROM AUTHOR]

Graphene hydrogels with high electrical conductivity were prepared by a one-step process using hydrazine hydrate as gel assembly agent (GH-HD). Conventional two-step process of gel formation and further reduction to prepare highly conducting gels was replaced by a single step involving equivalent amount of hydrazine. Optimized graphene oxide concentration was established to facilitate such monolith formation. Extensive characterization and control studies enabled understanding of the material properties and gel formation mechanism. The synthesized gel shows a high electrical conductivity of 1141 S/m. The supercapacitor based on GH-HD delivers a high specific capacitance of 190 F/g at a current density of 0.5 A/g and 123 F/g at very high current density of 100 A/g. Furthermore, excellent power capability and cyclic stability were also observed. 3D macroporous morphology of GH-HD makes it ideal for high rate supercapacitor applications. [ABSTRACT FROM AUTHOR]

Silicon nanoparticles (NPs) serve a wide range of optical, electronic, and biological applications. Chemical grafting of various molecules to Si NPs can help to passivate their reactive surfaces, 'fine-tune' their properties, or even give them further interesting features. In this work, 1H, 13C, and 29Si solid-state NMR spectroscopy has been combined with density functional theory calculations to study the surface chemistry of hydride-terminated and alkyl-functionalized Si NPs. This combination of techniques yields assignments for the observed chemical shifts, including the contributions resulting from different surface planes, and highlights the presence of physisorbed water. Resonances from near-surface 13C nuclei were shown to be substantially broadened due to surface disorder and it is demonstrated that in an ambient environment hydride-terminated Si NPs undergo fast back-bond oxidation, whereas long-chain alkyl-functionalized Si NPs undergo slow oxidation. Furthermore, the combination of NMR spectroscopy and DFT calculations showed that the employed hydrosilylation reaction involves anti-Markovnikov addition of the 1-alkene to the surface of the Si NPs. [ABSTRACT FROM AUTHOR]

Magic-angle spinning dynamic nuclear polarization (MAS-DNP) has been proven to be a powerful technique to enhance the sensitivity of solid-state NMR (SSNMR) in a wide range of systems. Here, we show that DNP can be used to polarize lipids using a lipid-anchored polarizing agent. More specifically, we introduce a C16-functionalized biradical, which allows localization of the polarizing agents in the lipid bilayer and DNP experiments to be performed in the absence of excess cryo-protectant molecules (glycerol, dimethyl sulfoxide, etc.). This constitutes another original example of the matrix-free DNP approach that we recently introduced. [ABSTRACT FROM AUTHOR]

Peptides are interesting tools to rationalize uranyl-protein interactions, which are relevant to uranium toxicity in vivo. Structured cyclic peptide scaffolds were chosen as promising candidates to coordinate uranyl thanks to four amino acid side chains pre-oriented towards the dioxo cation equatorial plane. The binding of uranyl by a series of decapeptides has been investigated with complementary analytical and spectroscopic methods to determine the key parameters for the formation of stable uranyl-peptide complexes. The molar ellipticity of the uranyl complex at 195 nm is directly correlated to its stability, which demonstrates that the β-sheet structure is optimal for high stability in the peptide series. Cyclodecapeptides with four glutamate residues exhibit the highest affinities for uranyl with log KC=8.0-8.4 and, therefore, appear as good starting points for the design of high-affinity uranyl-chelating peptides. [ABSTRACT FROM AUTHOR]

Nickel(II) β-azido-meso-tetraphenylporphyrin was successfully anchored on silicon using a bifunctional linker that bears two terminal alkyne functions by the sequence (i) hydrosilylation of a C=C triple bond of the linker by surface Si-H groups and (ii) 1,3-Huisgen cycloaddition between the alkyne-terminated silicon surface and the azidoporphyrin derivative. [ABSTRACT FROM AUTHOR]

Nickel(ii) β-azido-meso-tetraphenylporphyrin was successfully anchored on silicon using a bifunctional linker that bears two terminal alkyne functions by the sequence (i) hydrosilylation of a CC triple bond of the linker by surface Si–H groups and (ii) 1,3-Huisgen cycloaddition between the alkyne-terminated silicon surface and the azidoporphyrin derivative. [ABSTRACT FROM AUTHOR]

Matrix ‐ Free DNP on Lipid Membranes Dynamic nuclear polarization (DNP) has been proven to be a powerful technique to enhance the sensitivity of solid ‐ state NMR. However, until now, there has been limited success in its application to synthetic membrane ‐ type systems. In their Communication on page 4512 ff., G. De Paëpe et al. present an innovative approach based on system ‐ driven radical design in order to insert the polarizing agent inside a lipid bilayer. Combined with matrix ‐ free DNP, this strategy solves additive ‐ induced problems by releasing the need for a DNP ‐ compatible solvent. [ABSTRACT FROM AUTHOR]