Search

PurposeThe purpose of this study is to investigate the impact of the age diversity of the top management team (TMT) on firm performance and on the managerial ability of the TMT. Furthermore, this study investigates how the relationship between age diversity and firm performance is mediated by managerial ability and the contextual nature of the relationship.Design/methodology/approachThis is an empirical study which uses regression analyses and mediation analyses to evaluate the hypotheses.FindingsThe authors observe a negative relationship between age diversity and firm performance and also between age diversity and managerial ability of the TMT. Further, the authors find that that the negative relationship between age diversity and firm performance is mediated by managerial ability. The authors also find that the relation between performance and age diversity is context specific – the negative relationship between age diversity and firm performance is ameliorated during times of financial crisis.Social implicationsIn an environment where diversity is beginning to be valued, insights into the impact of different types of diversity on performance become important. Age diversity is a critical component of diversity. Therefore, insights into the impact of age diversity on performance will be of interest to managers, academics and even regulators.Originality/valueTo the best of the authors’ knowledge, this study is the first to evaluate the impact of age diversity on the market perception of firm performance of US firms using a large, comprehensive, multi-year data set. Furthermore, this is the only study to evaluate the impact of age diversity on managerial ability and show the mediating effect of managerial ability on the relationship between age diversity and firm performance.

Green seaweeds (Chlorophyta) are often considered a nuisance, but may in fact constitute a potential climate-friendly renewable resource in the new bioeconomy. Utilization of green seaweed polysaccharides could in particular enable a new type of green growth in coastal regions in developing countries e.g. in West Africa. The carbohydrate constituents, including cellulose, are lignin-free, but only limited knowledge is available on the cellulose ultrastructure and cellulose crystallinity in commonly occurring green seaweeds. Abundantly available green seaweeds along the coast in West Africa include Chaetomorpha linum, Caulerpa taxifolia, Ulva fasciata and Ulva flexuosa. Here, using X-ray diffraction (XRD), on cellulose gently purified from the green seaweeds, we determined that mainly cellulose Iα was present in both C. linum and U. flexuosa. We also found that the crystallite diameter was particularly large, 16 nm, in both the Ghanaian and the Danish C. linum samples, especially compared to the crystallite diameter of 2.5–5 nm in most terrestrial vascular plants (Tracheophytes), which mainly contain cellulose Iβ. For U. flexuosa, increasing crystallinity of the cellulose was achieved during purification. Cellulose purification was not achievable for C. taxifolia, indicating that in this species the glucose is mainly a constituent of other carbohydrates, presumably notably of starch. Transmission electron microscopy (TEM) confirmed the large size of the crystallites of C. linum showing the cellulose forming a multi-lamellar structure with alternating perpendicular and parallel layers along the fibre axis. The cell wall nano-structure appeared amorphous in C. taxifolia and as a network in U. fasciata and U. flexuosa. As glucose was most abundant in C. linum and its cellulose was crystalline, this green seaweed species appears particularly promising as a source for manufacturing of novel cellulose-based materials, e.g. specialized paper or cellulose-based composite materials.

This study investigated a new technique for obtaining wood powders from whole logs (Pinus sylvestris L.) in a single-step operation. The performance of a prototype multi-blade shaft mill (MBSM) was evaluated using a designed series of experiments including three input parameters, i.e., the moisture content of the log, milling blade speed and log feeding speed, combined with multilinear regression (MLR) analysis. The milling performance was characterised by specific milling energy, particle size distribution and bulk density of powder. For MBSM powders (80 to 95% particles

The aim of this study was to evaluate changes in fibre properties with high (HC)- and low consistency (LC) refining of TMP and determine how these contribute to tensile index. Two process configurations, one with only HC refining and another with HC refining followed by LC refining were evaluated in three TMP mainline processes in two mills using Norway spruce. An increase in tensile index for a given applied specific energy was similar for all LC refiners in the three lines, despite differences in the fibre property profiles of the feed pulps. Compared with only HC refined pulps at a given tensile index, HC+LC refined pulps had greater fibre wall thickness, similar fibre length, strain at break and freeness, but lower light scattering coefficient, fibre curl and external fibrillation. The degree of internal fibrillation, determined by Simons’ stain measurements, was similar for both configurations at a given tensile index. The results indicate that the increase in tensile index in LC refining is largely influenced by a decrease in fibre curl and in HC refining by peeling of the fibre walls. Compared at a given tensile index, the shive content (Somerville mass fraction) was similar for both HC+LC and HC refining.

Background and Purpose: Cerebral cavernous malformations (CCM) present as mulberry-like malformations of the microvasculature of the central nervous system. Current medical treatment of CCM lesions is limited to surgical removal of the vascular malformations. It is, therefore, important to identify therapeutic drug treatments for patients with CCM. Propranolol has shown great benefit in the treatment of infantile hemangioma. In addition, patients with CCM who receive propranolol have demonstrated a reduction of their lesions. Our investigation set out to provide preclinical data to support propranolol as a therapeutic treatment. Methods: An inducible endothelial-specific Ccm3 knockout murine model (CCM3 iECKO ) was used, with assessment of lesion quantity and size following oral treatment with propranolol. Scanning and transmission electron microscopy were used to characterize the CCM3 iECKO lesions and the effects of propranolol on the disease. Immunofluorescent imaging was used to investigate pericyte coverage in the propranolol-treated CCM3 iECKO mice. Results: With propranolol treatment, the lesion quantity, size, and volume decreased in both the brain and retina in the CCM3 iECKO model. Novel characteristics of the CCM3 iECKO lesions were discovered using electron microscopy, including plasmalemmal pits and thickening of the endothelial-pericyte basal membrane. These characteristics were absent with propranolol treatment. Pericyte coverage of the CCM3 iECKO lesions increased after propranolol treatment, and vascular leakage was reduced. Conclusions: This study supports the concept that propranolol can be used to reduce and stabilize vascular lesions and can, therefore, be suggested as a pharmaceutical treatment for CCM.

Supplemental Digital Content is available in the text., Background: PALMD (palmdelphin) belongs to the family of paralemmin proteins implicated in cytoskeletal regulation. Single nucleotide polymorphisms in the PALMD locus that result in reduced expression are strong risk factors for development of calcific aortic valve stenosis and predict severity of the disease. Methods: Immunodetection and public database screening showed dominant expression of PALMD in endothelial cells (ECs) in brain and cardiovascular tissues including aortic valves. Mass spectrometry, coimmunoprecipitation, and immunofluorescent staining allowed identification of PALMD partners. The consequence of loss of PALMD expression was assessed in small interferring RNA-treated EC cultures, knockout mice, and human valve samples. RNA sequencing of ECs and transcript arrays on valve samples from an aortic valve study cohort including patients with the single nucleotide polymorphism rs7543130 informed about gene regulatory changes. Results: ECs express the cytosolic PALMD-KKVI splice variant, which associated with RANGAP1 (RAN GTP hydrolyase activating protein 1). RANGAP1 regulates the activity of the GTPase RAN and thereby nucleocytoplasmic shuttling via XPO1 (Exportin1). Reduced PALMD expression resulted in subcellular relocalization of RANGAP1 and XPO1, and nuclear arrest of the XPO1 cargoes p53 and p21. This indicates an important role for PALMD in nucleocytoplasmic transport and consequently in gene regulation because of the effect on localization of transcriptional regulators. Changes in EC responsiveness on loss of PALMD expression included failure to form a perinuclear actin cap when exposed to flow, indicating lack of protection against mechanical stress. Loss of the actin cap correlated with misalignment of the nuclear long axis relative to the cell body, observed in PALMD-deficient ECs, Palmd−/− mouse aorta, and human aortic valve samples derived from patients with calcific aortic valve stenosis. In agreement with these changes in EC behavior, gene ontology analysis showed enrichment of nuclear- and cytoskeleton-related terms in PALMD-silenced ECs. Conclusions: We identify RANGAP1 as a PALMD partner in ECs. Disrupting the PALMD/RANGAP1 complex alters the subcellular localization of RANGAP1 and XPO1, and leads to nuclear arrest of the XPO1 cargoes p53 and p21, accompanied by gene regulatory changes and loss of actin-dependent nuclear resilience. Combined, these consequences of reduced PALMD expression provide a mechanistic underpinning for PALMD’s contribution to calcific aortic valve stenosis pathology.

Field retting is an industrial process for extracting valuable bast fibres from hemp. In this study, molecular, chemical, and scanning electron microscopy studies were employed to understand the field retting mechanisms involving microbiota, including microbial community dynamics, hemp colonization, functions/interactions, and hemp biodegradation. This study for the first time revealed the coexistence of bacterial-fungal interactions during retting and showed progressive microbial breakdown of the stems. Using scanning electron microscopy, evidence for microbial activities/interactions within the stems was obtained, which helped to understand hemp retting mechanisms. The collective findings showed that: a) initially, easily accessible food within the hemp stems attracted and supported microbial invasion and decay, with activities influenced by the stem anatomy, chemistry, and morphology; b) filamentous fungi as key players in the early stages remarkably contributed to efficient fibre defibration; c) extended retting enhanced the bacterial activities, including bacterial-fungal interactions and their dominant role within the community; d) bacterial attraction and activities were promoted by bacterial mycophagy with a set of different phenotypic behaviours for nutrients and fungal highways for transport within the stems; and e) bast fibre degradation leading to inferior quality during prolonged retting was caused by ultrastructural modifications to all of the major fibre cell wall layers.

The objective of this work was to investigate the use of hydrothermal pre-treatment and enzymatic retting to remove non-cellulosic compounds and thus improve the mechanical properties of hemp fibre/epoxy composites. Hydrothermal pre-treatment at 100 kPa and 121 °C combined with enzymatic retting produced fibres with the highest ultimate tensile strength (UTS) of 780 MPa. Compared to untreated fibres, this combined treatment exhibited a positive effect on the mechanical properties of hemp fibre/epoxy composites, resulting in high quality composites with low porosity factor (αpf) of 0.08. Traditional field retting produced composites with the poorest mechanical properties and the highest αpf of 0.16. Hydrothermal pretreatment at 100 kPa and subsequent enzymatic retting resulted in hemp fibre composites with the highest UTS of 325 MPa, and stiffness of 38 GPa with 50% fibre volume content, which was 31% and 41% higher, respectively, compared to field retted fibres.

The wide variation of mechanical properties of natural fibers limits their applications in matrix composites. The aim of this study is to evaluate the properties of hemp fibers from different stem sections (top, middle and bottom) and to assess fungal retting pretreatment of hemp from different stem sections with the white rot fungi Phlebia radiata Cel 26 and Ceriporiopsis subvermispora. For the untreated hemp fibers, no apparent difference in tensile behavior for fiber bundles from different stem sections was observed, and more than 90% tested samples demonstrated plastic flow behavior. Fiber strength and stiffness were highest for the fibers from the top and middle stem sections. These properties were related to the compositional make up and morphological properties of hemp fibers, notably the secondary fiber cell contents. In fungal retting, there was a strong dependence of depectinization selectivity on stem section, which decreased from bottom to top presumably due to the significantly higher lignin content in the bottom section than in the top section (middle section was in between). Consequently, the fungal retting caused a lower reduction in strength of fibers from the bottom section than in those from the top stem section, and essentially reversed the influence of stem section on fiber tensile strength through depectinization selectivity. At whole hemp stem level, the fungal retting with P. radiata Cel 26 exhibited better mechanical properties with an ultimate tensile strength, strain and stiffness of 736 MPa, 2.3% and 42 GPa, respectively, while fibers treated with C. subvermispora exhibited lower mechanical properties of 573 MPa, 1.9% and 40 GPa, respectively. The study thus also showed that less variable and high strength fibers may be produced using the dependence of depectinization selectivity on stem section for composite application.

The use of marine macroalgae as carbon source for fermentation is gaining increasing attention due to their high carbohydrate content and availability. Three green seaweed species Chaetomorpha linum, Ulva fasciata and Caulerpa taxifolia were investigated for their amenability to enzymatic saccharification. Microstructural changes were studied in order to understand the physical changes occurring in the seaweeds during saccarification and to identify structural barriers. C. linum had highest glucan content (20%), compared to 16% in U. fasciata and 6% in C. taxifolia indicating large differences in composition. Glucose yields obtained after 24 h of enzymatic saccharification were 59, 38 and 60% for C. taxifolia, U. fasciata and C. linum, respectively, based on the glucan content. Pre-autoclaving increased the saccharification yield to 81, 99 and 71%, respectively. Morphologically, C. linum displayed unbranched filaments, U. fasciata two-cell layer large sheets and C. taxifolia featured leaf like structures. Enzymatic saccharification resulted in cell wall degradation and release of the chlorophyll content in C. linum, delamination of sheets in U. fasciata and surface erosion of leaves in C. taxifolia. C. taxifolia deviated in being very rich in β-1,3 linked xylan (46%), which was only hydrolysed at 1% xylose yield due to lack of β-1,3-xylanase. Based on the high cellulose content and no need for pre-treatment C. linum was the best source of glucose among the three types of green seaweed species. Further studies are warranted to assess fermentation. We also conclude that for C. taxifolia enzymatic saccharification with β-1,3-xylanase might enable further xylose release than obtained here with the enzymatic cellulase treatment.

The large variability in the mechanical properties of hemp fibers is an issue in relation to their use in high-grade composites. The objective of the present study was to determine the optimal growth stage for harvesting hemp fibers for use in composites and to evaluate the effect of field retting time on mechanical performance of the fibers. Reduction in bast content and thickness of the primary bast fiber layer in stems were found to be highly significant ( P

In an effort to develop new fluoroquinolones, we synthesized eight compounds and tested them against a panel of bacteria. The design of these compounds was guided by the introduction of the isothiazoloquinolone motif. The three most active compounds in this series, 8-10, demonstrated good antibacterial activity against methicillin-sensitive Staphylococcus aureus and healthcare-acquired methicillin-resistant Staphylococcus aureus (MIC 0.62-6.3 µg/mL). Further, when these three active compounds were tested for their inhibitory effects on bacterial enzymes, compound 9 was the most effective agent exhibiting IC

Classical field retting and controlled fungal retting of hemp using Phlebia radiata Cel 26 (a mutant with low cellulose degrading ability) were compared with pure pectinase treatment with regard to mechanical properties of the produced fibre/epoxy composites. For field retting a classification of the microbial evolution (by gene sequencing) and enzyme profiles were conducted. By phylogenetic frequency mapping, different types of fungi, many belonging to the Ascomycota phylum were found on the fibres during the first 2 weeks of field retting, and thereafter, different types of bacteria, notably Proteobacteria, also proliferated on the field retted fibres. Extracts from field retted fibres exhibited high glucanase activities, while extracts from P. radiata Cel 26 retted fibres showed high polygalacturonase and laccase activities. As a result, fungal retting gave a significantly higher glucan content in the fibres than field retting (77 vs. 67%) and caused a higher removal of pectin as indicated by lower galacturonan content of fibres (1.6%) after fibres were retted for 20 days with P. radiata Cel 26 compared to a galacturonan content of 3.6% for field retted fibres. Effective fibre stiffness increased slightly after retting with P. radiata Cel 26 from 65 to 67 GPa, while it decreased after field retting to 52 GPa. Effective fibre strength could not be determined similarly due to variations in fibre fracture strain and fibre-matrix adhesion. A maximum composite strength with 50 vol% fibres of 307 MPa was obtained using P. radiata Cel 26 compared to 248 MPa with field retting.

High-yield pulping of wood chips using low-consistency (LC) refining in combination with primary-stage high-consistency (HC) refining has previously been shown to produce paper with quality parameters (tensile strength and light-scattering coefficient) commonly targeted for newsprint with significantly less refining energy input than using only HC refining. However, questions remain on the differences in the refining action between the two refiner types and for high-yield pulping, the refiner energy demand is a crucial process parameter. Therefore, fines- and fiber-fraction development in HC and LC refining has been studied in detail using Bauer-McNett fractionation, and the respective tensile strengths of the different fractions have been compared. Quantitative and qualitative (morphological) characteristics of the isolated fine fractions have also been analyzed in detail using a newly developed automated fluorescence microscopy method and scanning electron microscopy. The results suggest the difference in LC/HC pulp properties (strength and optical) is partly derived from deviating fiber and fines morphologies and mass balances. The quality of the fines generated during HC and LC refining also differs. LC-refined pulps contain thinner fibrillar fines (thread-like) and HC-refined pulps broader fibrils such as lamellae-type fines. Flake-like fines from the outer fiber wall decreased in relative amount with energy input.

Primary refined softwood was subjected to high-consistency (HC) or low-consistency (LC) secondary refining, and the nature of the development of the internal and external fiber microstructure and ultrastructure has been compared. The primary refining of mixed softwood as a raw material was performed in pilot scale by the advanced thermomechanical pulp process. The study was aiming at the comparative characterization of LC and HC pulps at the fiber level when produced with similar and well-characterized handsheet properties. The formerly described Simons’ staining method was applied. A significant degree of fiber wall delamination/internal fibrillation (D/IF) was observed during both LC and HC refining. Both the energy input and the refining consistency had a significant impact on elevating the degree of fiber wall D/IF. The statistical evaluation of internal fiber development indicated that the fiber populations in LC- and HC-refined pulps had a similar degree of fiber wall D/IF despite having a large difference in refining energy input (420 kW h odt-1), confirming that D/IF was promoted more energy-efficiently in LC than in HC refining. The characteristic of the external fiber development from HC and LC refining was very different. Secondary LC refining promoted fiber surfaces with ribbons of thin hairlike threads arising from the inner secondary S2 layer that occasionally developed along the whole fiber length. Broad sheet- and lamellae-type external fibrillation from the S2 was typical for HC refining, and these characteristics were rarely observed in the LC pulps. The mechanisms for LC and HC fiber development are proposed. The cell wall characteristics (internal and external) of the pulp fibers appear to govern most of the physical and optical properties in handsheets.

Electrode materials are critical for microbial fuel cells (MFC) since they influence the construction and operational costs. This study introduces a simple and efficient electrode material in the form of palm kernel shell activated carbon (AC) obtained in tropical regions. The novel introduction of this material is also targeted at introducing an inexpensive and durable electrode material, which can be produced in rural communities to improve the viability of MFCs. The maximum voltage and power density obtained (under 1000 Ω load) using an H-shaped MFC with AC as both anode and cathode electrode material was 0.66 V and 1.74 W/m3, respectively. The power generated by AC was as high as 86% of the value obtained with the extensively used carbon paper. Scanning electron microscopy and Denaturing Gradient Gel Electrophoresis (DGGE) analysis of AC anode biofilms confirmed that electrogenic bacteria were present on the electrode surface for substrate oxidation and the formation of nanowires.

Microbial fuel cells (MFCs) rely on microbial conversion of organic substrates to electricity. The optimal performance depends on the establishment of a microbial community rich in electrogenic bacteria. Usually this microbial community is established from inoculation of the MFC anode chamber with naturally occurring mixed inocula. In this study, the electrochemical performance of MFCs and microbial community evolution were evaluated for three inocula including domestic wastewater (DW), lake sediment (LS) and biogas sludge (BS) with varying substrate loading (Lsub) and external resistance (Rext) on the MFC. The electrogenic bacterium Geobacter sulfurreducens was identified in all inocula and its abundance during MFC operation was positively linked to the MFC performance. The LS inoculated MFCs showed highest abundance (18% ± 1%) of G. sulfurreducens, maximum current density [Imax = (690 ± 30) mA·m- 2] and coulombic efficiency (CE = 29% ± 1%) with acetate as the substrate. Imax and CE increased to (1780 ± 30) mA·m- 2 and 58% ± 1%, respectively, after decreasing the Rext from 1000 Ω to 200 Ω, which also correlated to a higher abundance of G. sulfurreducens (21% ± 0.7%) on the MFC anodic biofilm. The data obtained contribute to understanding the microbial community response to Lsub and Rext for optimizing electricity generation in MFCs.

The electrical energy consumption in thermomechanical pulping (TMP) is very high, in the range of 2 – 3 MWh/adt depending on process solution and on the product quality specifications for the paper product. Both pulpwood and energy prices have increased rapidly for some time. Due to this, the main focus of the research and development is on ways to reduce the electrical energy consumption in wood chip refining. As a step towards a more energy and cost ‐ effective refining process, Holmen Paper AB has invested in a new mechanical pulping process at its Braviken mill. In this case the primary refining stage consists of high consistency (HC) double disc refiners ‐ RGP68DD (machines with two counter rotating discs). Earlier studies on the refining conditions, such as intensity and temperature, have indicated that it should be possible to improve the energy efficiency in double disc refining while maintaining the functional pulp properties such as tensile index. The main goal of this project was to improve the energy efficiency in double disc chip refining with 150 kWh/adt to corresponding pulp properties as measured on pulp samples after refiner. In order to further improve the basic understanding of what happens to the wood fibre material when changing the process conditions, the morphological and ultrastructural changes of fibres were also studied. This part of the research work was performed in cooperation with the research program; Collaborative Research on the Ultrastructure of Wood Fibres (CRUW). This licentiate project is a part of a large development project where different techniques to improve the energy efficiency has been evaluated by means of mill scale trials at the Holmen Paper Braviken Mill. The high consistency double disc chip refining part of the project was financed by The Swedish Knowledge Foundation, Metso Paper and Holmen Paper, in cooperation with FSCN (Fiber Science & Communication Network) at Mid Sweden University. The trials were made on one of the TMP lines at the Holmen Paper Braviken mill with Norway spruce as raw material. The influence of increased specific refining energy on pulp properties were studied at different refining temperatures, refining intensity, pulp consistency and production rate. Results from these trials were later validated by means of long term trials. Intensity models and simulations for intensity changes by new segment design were made by Juha‐ Pekka Huhtanen from Tampere University of Technology, Finland. The results show that the specific energy consumption to same tensile index can be improved by means of increasing the refining pressure/temperature. The energy efficiency was improved by 80 ‐150 kWh/adt depending on load and the inlet‐ and housing pressure. The largest relative specific energy efficiency improvement was reached at low specific energy consumption levels. Similar fibre surface ultrastructure characteristics are gained by pulps with high pressure/temperature and low specific energy consumption compared to low pressure/temperature and high specific energy consumption pulps. High pressure/temperature and high specific energy consumption resulted in significantly increase in the delamination/internal fibrillation of pulp fibres. The surface ultrastructure of these fibres exhibited exposed S2 layer with long ribbontype fibrillation compared to pulps produced with lower temperature and lower specific energy consumption. When the refiner was operated at high pressure, the tensile index was preserved over the whole plate life. The specific light scattering coefficient increased with increasing pressure/temperature. A reason for this could be increased intensity caused by decreased plate gap. Increased intensity by means of refiner segment design changes resulted in large specific light scattering coefficient increase at similar tensile index, lower shives content, lower average fibre length and lower CSF at same specific energy consumption. The fresh steam consumption was reduced by the increased refiner ressure/temperature.

Fiber development of mechanical pulps is normally assessed by a combination of conventional numerical analyses of fiber features using FiberMaster, PulpEye, and Kajaani instruments. When observed, changes in fiber morphology are normally subjective with use of light- and electron microscopy observations of representative fibers. Thus, visualization and quantification of changes in the fiber cell wall, like delaminaton/internal fibrillation (D/IF) induced during processing, would offer a great advantage. Here, we developed a method using Simons’ stain (SS) that allows quantification of pulp fiber development in terms of fiber wall D/IF during different process conditions, as well as statistical analysis of whole pulp fiber populations of different thermomechanical pulp (TMP) types for the degree of D/IF developed in pulp fibers. The attributes of SS for producing different colored reactions (blue, green, orange, etc.) in pulp fibers through cell wall modification during processing were used in correlation with light microscopy. The method readily measured the degree of cell wall D/IF of pulp fibers from different double-disc refined TMPs produced using varying levels of specific energy and refining pressures. The SS method revealed the presence of five sub-fiber populations in a whole pulp of a given TMP type representing different categories of fibers that possessed varying degrees of cell wall D/IF as a result of process conditions/treatments. Results of statistical analysis indicated that, while D/IF was significantly induced by both the applied refining pressure and specific energy, the effect of energy had the greatest influence. Based on statistical analysis for Bauer McNett fractions of 10, 30, and 50 mesh, we suggest that fraction 30 is the most suitable fiber fraction for the analysis of TMPs using fiber characterization procedures, as this fraction possesses the most treated fibers. The method provided useful information regarding pulp fiber development at the cell wall level that has the potential to explain pulp and paper properties developed in furnishes. The present SS method represents a valuable tool for assessing fiber development at the cell wall level in mechanical pulping.

A study was carried out aiming at understanding the fundamental reasons for different fibre behaviour exhibited by Norway spruce and Scots pine causing large energy consumption differences during thermomechanical pulping (TMP). Ultrastructural characterization of TMP fibres and shives, which were sampled from the two wood species after primary refining, was performed using scanning electron microscopy, transmission electron microscopy (TEM) and TEM-immunogold labelling for their morphological and topochemical properties. As expected, pine wood chips needed higher electrical energy consumption to be refined to a given Canadian Standard Freeness and it produced inferior strength properties compared to spruce. Electron microscopy (EM) observations indicated that the mechanisms of fibre development during primary refining of pine and spruce were different. The two stages of pine fibre separation and development were not concurrent. Results indicated that pine fibre defibration/fracture occurred predominantly through the compound middle lamella/S1 interphase or through the S1 layer producing lesser amounts of shives during the primary refining stage than spruce. In contrast, spruce fibres defibrated mainly through the S2 layer. Detailed EM observations on shives and pulp fibres from TMP revealed the ultrastructural characteristics associated with pine fibre cell walls. Morphological and topochemical features of the S1 layer, S1/S2 interphase, such as lignin and galactoglucomannan distribution across cell walls were explored. The ultrastructural properties are discussed in relation to the TMP parameters (i.e., electrical energy consumption) and strength data. It is concluded that ultrastructural characteristics of Scots pine fibre cell walls govern the different fibre development mechanisms and explain the negative response of this wood during TMP processing.

Due to the increasing demand for Norway spruce as prime raw material for high-yield pulping, recent interest has focused on Scots pine as an alternative. However, the intrinsic properties of Scots pine, particularly the high amounts of extractives and the fiber properties, have been considered a disadvantage for thermomechanical pulping. A study was therefore conducted on the variations in the spatial distribution and redistribution of lipophilic extractives in spruce and pine wood and thermomechanical pulp (TMP) using cytochemical staining methods and chemical analysis. Chemical analyses showed chips from pine thinnings and sawmill slabs to contain three to five and two to three times, respectively, more extractives than found in spruce; in particular, the amount of triglycerides differed significantly. Results from staining techniques on the abundance and distribution of extractives (i.e., fats) between pine and spruce correlated with amounts detected by Fourier transform infrared spectroscopy and gel permeation chromatography. Cytochemical observations revealed information pertaining to species-specific distribution and redistribution of extractives among TMP fines and fibers and indicated the presence of a molecular film of extractives. Results indicate that the high concentrations of extractives in pine ray parenchyma are released during TMP processing and are redistributed onto the surfaces of the pulps, negatively affecting energy usage during primary refining.

A study was performed on stone groundwood (SGW) pulps produced on a pilot scale. The behaviour of selected juvenile and mature Norway spruce wood samples was investigated. As revealed by standard tests, sheets formed from juvenile wood showed improved light scattering properties, improved tear and tensile strength, and higher sheet density compared to those formed from mature wood. Scanning electron microscopy indicated that the differences are likely related to the manner of fibre processing and development at the ultrastructural level. Mature wood fibres showed greater fibre end breakage, a smaller long-fibre fraction, enhanced S1 fibrillation and frequently open fibres. In contrast, juvenile fibres had a 14% higher long-fibre fraction and showed typical S2 fibrillation. Fibre development of juvenile wood showed fibrillation features similar to those previously reported for thermomechanical pulp fibres. In both cases, the structural hierarchy of the wood fibre cell wall and the microfibril angle of S2 and S1 layers govern cell-wall splitting and fibrillation progression. The superior quality of the fibre furnish prepared from juvenile fibres compared to mature fibres with SGW pulping may offer an alternative process for more effective utilisation of raw materials such as top logs rich in juvenile wood.

Refining during mechanical pulping causes delamination and internal fibrillation (D/IF) of the fibre wall and changes the surface ultrastructure. Fundamental knowledge about these phenomena at the fibre cell wall level helps our understanding of the development of pulp and paper properties, which in turn facilitates the optimization of processes, helping to save energy and improve the characteristics of final products. In the present study, pulps were produced by double-disc (DD) refined thermomechanical processes (DD-TMP) and have been characterized at the fibre cell wall micro/ultrastructural level based on Fernando and Daniel’s method (2010) of Simons’ staining and scanning electron microscopy (SEM). The pulps studied were never-dried Norway spruce DD-TMP from a full-scale mill trial running under different process conditions; a) varying refining intensity, achieved by using a high-intensity turbine segment (HTS) and a standard (Ref) segment from Metso, and b) varying specific energy consumption (SEC). Improved energy efficiency was obtained with HTS segments, giving adequate or better pulp properties with respect to elongation, light scattering, Canadian Standard Freeness (CSF) at a similar tensile index level and lower energy consumption. Energy efficiency was gained through an elevated degree of D/IF and S2 fibrillation with low energy input. Both the SEC and segment designs had a significant impact on elevating the degree of D/IF. Statistical evaluation of fibre development with respect to D/IF gave evidence for improved energy efficiency in HTS refining. Ultrastructural studies on fibre surfaces showed that HTS refining produced better external fibrillation and leads to exposing the secondary S2 wall as fibre outer layer with different ribbon-type S2 fibrillation. Information obtained at the fibre wall level concerning D/IF and surface ultrastructure contribute to the fundamental knowledge about the pulp and handsheet properties and the energy efficiency of TMP processing.

The effects of low dosage sulfite pretreatment combined with modern high consistency double disc refining were evaluated for production of thermomechanical pulp in a mill scale trial using Norway spruce wood at the Braviken paper mill (Holmen Paper AB, Sweden). Spruce wood chips were mechanically pretreated in an Impressafiner before impregnation with different dosages (0-1.2%) of sodium sulfite (Na2SO3) at pH 9. Approximately 23% of the added sulfite was converted to sulfonate groups in pulp, resulting in a sulfonate content of 0-0.28% (as Na2SO3). The low dosage sulfite addition increased tensile index, elongation, density, brightness and decreased shive content, light scattering and light absorption coefficients when compared at equal specific energy consumption (SEC). The increase in tensile index was proportional to dosage of sulfite. Further analyses showed that low dosage sulfite addition did not affect the distribution of the Bauer-McNett fractions nor the fibre length for pulps refined with equal SEC. However, the low dosage sulfite addition increased fibre delamination/internal fibrillation (D/IF). With the addition of 1.2% Na2SO3, it was possible to produce pulp with a tensile index of 47 Nm/g using ~320 kWh/bdt (~15%) lower refining energy, compared with pulps produced without sulfite addition.

Operating costs, pulp quality, and loss of markets continue to dominate the concern of mechanical pulp producers. The search for process improvements, new products, and cost reductions requires significant amount of pulp testing to find out how improvements or new products can be achieved. Unfortunately, the required testing comes at a significant cost due to the time consuming and labor intensive preparation of each sample. For example, a detailed analysis which requires fractionation, hot disintegration, hand sheets, etc. may cost in excess of a thousand dollars. Thus, for an in-depth study where one compares different processes or operating conditions, the cost is significant. At the IMPC conference in Helsinki 2010, 2014 Fernando & Daniel showed how a modern variation of Simon staining can be used to gain information about the fiber wall conditions. This idea has now been expanded further by combining traditional fiber morphology measurements with the information gained from the measurement of color and intensities. In this paper, we will demonstrate a new approach to evaluate mechanical pulps using a special optical analyzer with the ability to process images in color or image intensities. The additional information gained from the color of the images is discussed. For the study, we have been comparing results from three modern commercial installations. The results from these trials are discussed using traditional testing methods in an earlier paper by Ferritsius et al., (2016). We will continue the discussion and show how these pulp samples were analyzed with a new optical device involving minimal sample preparations.