Search

The spike (S) protein is a leading vaccine candidate against SARS-CoV-2 infection. The S1 domain of S protein, which contains a critical receptor-binding domain (RBD) antigen, potentially induces protective immunoreactivities against SARS-CoV-2. In this study, we presented preclinical evaluations of a novel insect cell-derived SARS-CoV-2 recombinant S1 (rS1) protein as a potent COVID-19 vaccine candidate. The native antigenicity of rS1 was characterized by enzyme-linked immunosorbent assay with a neutralizing monoclonal antibody targeting the RBD antigen. To improve its immunogenicity, rS1-adjuvanted with fucoidan/trimethylchitosan nanoparticles (FUC-TMC NPs) and cytosine-phosphate-guanosine-oligodeoxynucleotides (CpG-ODNs) were investigated using a mouse model. The S1-specific immunoglobulin G (IgG) titers, FluoroSpot assay, pseudovirus- and prototype SARS-CoV-2-based neutralization assays were assessed. The results showed that the rS1/CpG/ FUC-TMC NPs (rS1/CpG/NPs) formulation induced a broad-spectrum IgG response with potent, long-lasting, and cross-protective neutralizing activity against the emerging SARS-CoV-2 variant of concern, along with a Th1-biased cellular response. Thus, the rS1/CpG/NPs formulation presents a promising vaccination approach against COVID-19.

We report an extremely sensitive and ultra-low-cost PVDF-based SERS substrate using an easy fabrication process that can be conducted in a laboratory and scaled up for industrial applications. Hydrophilic PVDF membranes were sequentially dipped in ethanol and aqueous sodium chloride solution, following which multi-shaped Ag nanoparticles were deposited on the surface of the membranes by suction filtration. The simple solvating pretreatment led to an approximately 188-fold enhancement in the SERS signal intensity of R6G. Using the hydrophilic PVDF-based SERS substrate, subnanomolar sensitivity for R6G was achieved using 3 μL of sample volume on a 3×3 mm2 SERS substrate within 1 min detection time and without the need for concentration or drying processes. To demonstrate the feasibility of the developed SERS substrate as a sensor for bacterial spore detection, it was applied for the detection of the representative biomarker dipicolinic acid (DPA). The limits of detection of DPA and Bacillus spores were measured as 1 ppm and 5×103 spores/mL, respectively. The optimized configuration of low substrate area and wet micro-analyte volume makes the PVDF-based SERS substrate a simple and low-cost tool for the trace-level detection of small molecules in a rapid, sensitive, and high-throughput manner.

Fucoidan/trimethylchitosan nanoparticles (FUC-TMC-NPs) have the potential to improve the immunostimulating efficiency of anthrax vaccine adsorbed (AVA). FUC-TMC-NPs with positive (+) or negative (–) surface charges were prepared via polyelectrolyte complexation, both charged NP types permitted high viability and presented no cytotoxicity on L929, A549 and JAWS II dendritic cells. Flow cytometry measurements indicated lower (+)-FUC-TMC-NPs internalization levels than (–)-FUC-TMC-NPs, yet produced high levels of pro-inflammatory cytokines IFN-γ, IL12p40, and IL-4. Moreover, fluorescence microscope images proved that both charged NP could deliver drugs into the nucleus. In vivo studies on A/J mice showed that (+)-FUC-TMC-NPs carrying AVA triggered an efficient response with a higher IgG anti-PA antibody titer than AVA with CpG oligodeoxynucleotides, and yielded 100 % protection when challenged with the anthracis spores. Furthermore, PA-specific IgG1 and IgG2a analysis confirmed that (+)-FUC-TMC-NPs strongly stimulated humoral immunity. In conclusion, (+)-FUC-TMC-NP is promising anthrax vaccine adjuvant as an alternative to CpG.

We examined the efficacy of fucoidan-N-(2-hydroxy-3-trimethylammonium)propylchitosan nanoparticles (FUC-HTCC NPs) as adjuvants for anthrax vaccine adsorbed (AVA). Positively and negatively surface-charged FUC-HTCC NPs were prepared via polyelectrolyte complexation by varying the mass ratio of FUC and HTCC. When cultured with L929 cells or JAWS II dendritic cells, both charged NPs showed high cell viability and low cytotoxicity, observed via MTT assay and lactate dehydrogenase release assay, respectively. In addition, we have monitored excellent NPs uptake efficacy by dendritic cells and observed that combining FUC-HTCC NPs with AVA significantly increases the magnitude of IgG-anti-protective antigen titers in A/J mice compared to that by CpG oligodeoxynucleotides plus AVA or AVA alone, and PA-specific IgG1 and IgG2a analysis confirmed that FUC-HTCC NPs strongly stimulated humoral immunity. Furthermore, FUC-HTCC NPs plus AVA provided a superior survival rate (100%) of A/J mice compared to CpG oligodeoxynucleotides plus AVA (75%) or AVA alone (50%) following anthrax lethal toxin challenge. The findings support FUC-HTCC NPs as a potential adjuvant of AVA for rapid induction of protective immunity.

Herein, positively surface-charged silver nanoparticles (AgNPs) capped with trimethylchitosan nitrate (TMCN) were synthesized using an environmentally friendly method. Nano-sized TMCN-AgNPs (~80 nm) with high zeta potential (>30 mV) provide sufficient static repulsion to stabilize colloid AgNPs in aqueous solutions without aggregation for >3 months. In in vitro cell cycle assays, TMCN-AgNPs showed low cytotoxicity towards L929 cells. A microdilution inhibition assay demonstrated the antifungal potential of TMCN-AgNPs, with a minimum inhibitory concentration of 0.06 mM against Candida tropicalis ATCC 750, and 0.46 mM against both Candida albicans ATCC 76615 and Candida glabrata ATCC 15545. Moreover, the addition of TMCN-AgNPs at 0.23 mM significantly reduced biofilm formation in 96-well plates with C. albicans and C. tropicalis. Importantly, when zebrafish eggs were infected with Candida cells, 0.23 mM TMCN-AgNPs greatly diminished the amount of biofilm on eggs and rescued the survival of embryos by up to 70%.

A facile polyelectrolyte complexation method for the preparation of both positively and negatively surface charged nanoparticles composed of chondroitin sulfate (ChS) and N-[(2-hydroxy-3-trimethylammonium)propyl]chitosan (HTCC) is reported. Production of ChS-HTCC nanoparticles with reverse zeta potential was easily controlled by varying the ChS/HTCC mass ratio. The encapsulation efficiency increased with the increase in initial FITC-BSA concentration in positively charged NPs and reached 75%. However, a maximum of 20% encapsulation efficiency was achieved in the case of negatively charged NPs. In vitro release studies of positively charged ChS-HTCC NPs showed a small burst effect followed by a continued and controlled release. Both charges of ChS-HTCC NPs showed no cytotoxicity in HUVECs. The confocal images showed that ChS-HTCC NPs of both charges can be incorporated and retained by the A549 cells. Flow cytometric analysis data demonstrated that ChS-HTCC NPs of both charges were detected in more than 80% of the A549 cells.

Herein, we describe an improved procedure for the green synthesis of chondroitin sulfate stabilized silver nanoparticles (ChS-AgNPs). Glucose was used as a reducing agent under alkaline conditions to obtain a small particle size (10 nm), and the reduction was complete within one hour at room temperature. The concentration of NaOH affected the reaction rate, formation yield, and particle size of ChS-AgNPs. The formation of AgNPs was confirmed using UV-vis, TEM, XRD, and XPS. ChS-AgNPs showed excellent catalytic activities in the reduction of 4-nitrophenol by NaBH

In this study, we synthesized various quaternary chitosan derivatives and used them to stabilize gold nanoparticles (AuNPs). These chitosan derivatives comprised N-(2-hydroxy)propyl-3-trimethylammonium chitosan chloride (HTCC), folate-HTCC, galactosyl-HTCC, and their fluorescein isothiocyanate-conjugated derivatives. Various positively surface-charged AuNPs were prepared under alkaline conditions using glucose as a reducing agent in the presence of the HTCC derivatives (HTCCs). The effects of the concentration of NaOH, glucose, and HTCCs on the particles size, zeta potential, and stability were studied in detail. Cell cycle assays verify that none of the HTCCs or HTCCs-AuNPs was cytotoxic to human umbilical vein endothelial cells. Flow cytometry analysis showed that the folate HTCC-AuNPs were internalized in Caco-2, HepG2, and HeLa cancer cells to a significantly greater extent than AuNPs without folate. But, galactosyl HTCC-AuNPs only showed high cell uptake by HepG2 cells.

We report a facile route for the green synthesis of trimethylchitosan nitrate-capped silver nanoparticles (TMCN-AgNPs) with positive surface charge. In this synthesis, silver nitrate, glucose, and trimethyl chitosan nitrate (TMCN) were used as silver precursor, reducing agent, and stabilizer, respectively. The reaction was carried out in a stirred basic aqueous medium at room temperature without the use of energy-consuming or expensive equipment. We investigated the effects of the concentrations of NaOH, glucose, and TMCN on the particle size, zeta potential, and formation yield. The AgNPs were characterized by UV-visible spectroscopy, photon correlation spectroscopy, laser Doppler anemometry, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The catalytic activity of the TMCN-AgNPs was studied by the reduction of 4-nitrophenol using NaBH4 as a reducing agent. We evaluated the antibacterial effects of the TMCN-AgNPs on Acinetobacter baumannii, Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus using the broth microdilution method. The results showed that both gram-positive and gram-negative bacteria were killed by the TMCN-AgNPs at very low concentration (< 6.13 μg/mL). Moreover, the TMCN-AgNPs also showed high antibacterial activity against clinically isolated multidrug-resistant A. baumannii strains, and the minimum inhibitory concentration (MIC) was ≤ 12.25 μg/mL.

We prepared a novel porous gelatin (GEL) sponge which was cross-linked (CL) with a zero-length crosslinker of 2-chloro-1-methylpyridinium iodide (CMPI), and compared CPMI with 1-ethyl-3,3-dimethylaminoproplycarbodiimide (EDC). The ninhydrin assay indicated that the CMPI-CL-GEL sponge had a higher degree of cross-linking than the EDC-CL-GEL sponge at cross-linking saturation. In contrast, the EDC-CL-GEL sponge demonstrated poor water uptake and a much slower enzymatic degradation rate than the CMPI-CL-GEL sponge. Scanning electron microscopy (SEM) images of the gelatin sponge fabricated using a gradient frozen-lyophilization method showed uniformly distributed and interconnected pores. Human 3T3 fibroblasts were successfully seeded onto the scaffolds, and cell proliferation was sustained on all CL-GEL sponges. CMPI-CL-GEL sponges demonstrated significantly increased cell numbers after day 1, and cell numbers steadily rose from day 1 to 12. Meanwhile, the CMPI-CL-GEL sponge had a higher cell number than the EDC-CL-GEL sponge (P0.05) by day 4. In vitro studies with 3T3 fibroblasts demonstrated an increased cell viability for those cells grown on sponges cross-linked with CMPI compared to those cross-linked with EDC. SEM images revealed attachment and spreading of cells, the CMPI-CL-GEL sponges had more cells that had elongated, migrated, and formed interconnected networks with neighboring cells.

A novel method for preparing cell support membrane which employs heterogeneously cross-linking (CR) process to prepare water-insoluble gelatin (GEL) films was suggested, and compared with 1-ethyl-(3,3-dimethylaminopropyl)carbodiimide. In this study, we found that 2-chloro-1-methylpyridinium iodide (CMPI) is an effective zero-length cross-linker of gelatin, and showed a superior activation ability of carboxylic acid sodium salt under heterogeneous reaction. The CMPI-CR-GEL films showed high water uptake ability, reasonable biodegradability, and excellent cytocompatibility. In vitro studies with 3T3 fibroblasts demonstrated an increased cell viability for those cells grown on CMPI-CR-GEL membranes, and significantly increased cell numbers from Day 1–12. Furthermore, under heterogeneous process, the gelatin film can fabricate in advance, and maintained the original dimension, thickness, and shape after cross-link. Meanwhile, the reaction residues can be easy removed by rinsing and washing processes. These characteristics make the process easily transfer to industrial manufacturing in the future.

Positively and negatively surface-charged nanoparticles (NPs) were prepared with chondroitin sulfate (ChS) and trimethylchitosan (TMC). NP size, surface charge, formation yield, and water content were investigated as a function of weight ratio and concentration. Size and zeta potential were controlled by varying the ChS/TMC mass ratio. FTIR spectra revealed interactions among composite NP constituents. TEM images showed that the NPs were nearly spherical, with an average size of ∼ 300 nm. Encapsulation efficiency increased in positively charged NPs with increases in fluorescein isothiocyanate-bovine serum albumin concentration. Negatively charged NPs had only 10-20% encapsulation efficiency. The release profile, release kinetics and mechanism of positively charged ChS-TMC NPs were studied in vitro. NP cytocompatibility and uptake were verified ex vivo. Both types of NPs were taken up and retained in cells. A549 cells took up more positively charged (49.4%) than negatively charged (35.5%) NPs.

A one-step route for the green synthesis of highly stable and nanosized silver metal particles with narrow distribution is reported. In this environmentally friendly synthetic method, silver nitrate was used as silver precursor and biocompatible chondroitin sulfate (ChS) was used as both reducing agent and stabilizing agent. The reaction was carried out in a stirring aqueous medium at the room temperature without any assisted by microwave, autoclave, laser irradiation, γ-ray irradiation or UV irradiation. The transparent colorless solution was converted to the characteristics light red then deep red-brown color as the reaction proceeds, indicating the formation of silver nanoparticles (Ag NPs). The Ag NPs were characterized by UV–visible spectroscopy (UV–vis), photon correlation spectroscopy, laser Doppler anemometry, transmission electron microscopy (TEM), and Fourier-transform infrared spectroscopy (FT-IR). The results demonstrated that the obtained metallic nanoparticles were Ag NPs capped with ChS. In this report, dynamic light scattering (DLS) was used as a routinely analytical tool for measuring size and distribution in a liquid environment. The effects of the reaction time, reaction temperature, concentration and the weight ratio of ChS/Ag+ on the particle size and zeta potential were investigated. The TEM image clearly shows the morphology of the well-dispersed ChS-capped Ag NPs are spherical in shape, and the average size (

A variety of substituted 1-oxaspiro[4.4]non-6-ene, 1-oxaspiro[4.5]dec-6-ene, 6-oxaspiro[4.5]dec-1-ene and 1-oxaspiro[5.5]undec-7-ene systems have been prepared by utilizing Amberlyst-15-catalyzed intramolecular S N 2′ oxaspirocyclizations of secondary allylic alcohols under mild reaction conditions in quantitative yields. This oxaspirocyclization was applied to the total synthesis of theaspirane and theaspirone from β-ionone in five steps.

In this study, the potential of chondroitin sulfate (ChS)-chitosan (CS) nanoparticles (NPs) for the delivery of proteins was investigated. ChS-CS NPs were prepared by ionic cross-linking of CS solution with ChS. The aggregation line, particle size and zeta potential were investigated as a function of the pH, weight ratio and concentration. The water content and formation yield of the NPs were measured by gravimetry. Results indicated that ChS-CS NPs showed a higher degree of ionic cross-linking and formation yield than sodium tripolyphosphate-CS NPs. Fluorescein isothiocyanate conjugate bovine serum albumin (FITC-BSA), a model protein drug, was incorporated into the ChS-CS NPs. The encapsulation efficiency was obviously increased with the increase in initial FITC-BSA concentration and was as high as 90%. In vitro release studies of ChS-CS NPs showed a small burst effect following a continued and controlled release. Cytotoxicity tests with Caco-2 cells showed no toxic effects of ChS-CS NPs. The ex vivo cellular uptake studies using Caco-2 and HEK-293 cells indicated that NPs were found to be endocytosed into the cells. In conclusion, ChS-CS NPs are a potential new delivery system for the transport of hydrophilic compounds such as proteins.

The 1-azaspiro[4.4]nonane portion 11 of cephalotaxine was prepared via an intramolecular S N 2' substitution reaction followed by ozonolysis; condensation of 11 with the aromatic portion 13 gave compound 15; a Friedel-Crafts cyclization of 15 in polyphosphoric acid smoothly afforded the cephalotaxine skeleton 16. A single-crystal X-ray analysis of the HCl salt of 16 confirmed the structure of 16

Studies on the solution conformation of the cyclic depsipeptide antibiotic enopeptin A have been carried out using 2D NMR and molecular modelling techniques. The proton resonances of the antibiotic in DMSO-d6 have been assigned by the use of TOCSY and ROESY experiments. The interproton distance information obtained from the ROESY experiments have been used as the basis for elucidating the probable structures in solution. The restrained molecular dynamics technique was applied to calculate the structures in solution, and six resultant structures with fewer distance constraint violations were obtained that satisfy the experimental restraints very well. The conformation of the cyclic moiety of the molecule is well defined whereas the aliphatic chain segment is disordered.

A variety of substituted 1-oxaspiro[4.5]dec-6-ene and 1-oxaspiro[5.5]undec-7-ene systems have been prepared by utilizing Amberlyst-15-catalyzed SN2′ oxaspirocyclizations under mild reaction conditions (−20°C) in quantitative yields. In this process, a tertiary allylic alcohol serves as the precursor of π-allylic carbocation and the primary, secondary or tertiary alcohol within the same molecule serves as the nucleophile.

A variety of substituted 1-oxaspiro[4.4]non-6-ene, 1-oxaspiro[4.5]dec-6-ene, 6-oxaspiro[4.5]dec-1-ene and 1-oxaspiro[5.5]undec-7-ene systems have been prepared by utilizing Amberlyst-15-catalyzed intramolecular S N 2′ oxaspirocyclizations of secondary allylic alcohols under mild reaction conditions in quantitative yields. This oxaspirocyclization was applied to the total synthesis of theaspirane and theaspirone from β-ionone in five steps.

Three novel reactions for the synthesis of iso-condensed heteroaromatic pyrroles: (1) tandem intramolecular 1,3-dipolar cycloaddition and cycloreversion reaction; (2) phosphineimine-alkylidenemalonate cyclization reaction; (3) retromalonate addition reaction, are described. They can be used in acidic, neutral or basic conditions respectively. Iso-condensed heteroaromatic pyrroles, such as pyrrolo[3,4-b]indole 12, pyrrolo[3,4-b]pyridine 17, pyrrolo[3,4-c]pyridine 18, thieno[2,3-c]pyrrole 37, pyrrolo[3,4-b]pyrrole 40, pyrrolo[3,4-b]pyrazine 49, benzofuro[2,3-c]pyrrole 50, 1,2-bis[5-thieno[2,3-c]pyrrolyl]ethane 51, 1,4-bis[5-thieno[2,3-c]pyrrolyl]benzene 52, dipyrrolo[3,4-b;3′,4′-d]dipyrroles 55 and 56, benzotripyrroles 62–64, and thieno[3,4-c]pyrroles 67 and 73 are synthesized efficiently according to these methods.

A variety of substituted 1-oxaspiro[4.5]dec-6-ene and 1-oxaspiro[5.5]undec-7-ene systems have been prepared by utilizing Amberlyst-15-catalyzed SN2′ oxaspirocyclizations under mild reaction conditions (−20°C) in quantitative yields. In this process, a tertiary allylic alcohol serves as the precursor of π-allylic carbocation and the primary, secondary or tertiary alcohol within the same molecule serves as the nucleophile.

In order to obtain much slower biodegradable films, which are often required for biomedical applications, we have developed a series of studies on heterogeneous cross-linking of hyaluronic acid (HA) films by using 2-chloro-1-methylpyridinium iodide (CMPI) or 1-ethyl-(3,3-dimethylaminopropyl)carbodiimide (EDC) as cross-linking reagents. From the in vitro degradation rate, we found that EDC cross-linked HA films completely dissolved in PBS at 37 degrees C during the period of 4-6 days. However, CMPI cross-linked HA films showed only a low percentage of weight loss over 30 days. This phenomenon could be explained from the mechanism of reaction between carboxyl group of HA and EDC. The latter reacted with carboxyl group to form an unstable intermediate O-acylurea, which showed a relatively low reactivity and quickly rearranged to form a stable N-acylurea. Thus, most of the EDC-activated carboxyl groups in HA were chemically transferred into N-acylurea or left as unreactive O-acylurea, and only a few of cross-linking bonds were formed between HA. On the other hand, the intermediate obtained from the reaction between carboxyl group and CMPI showed a relatively high reactivity and reacted with the hydroxyl group of the same and/or different molecules of HA to form an inter- and intramolecular esterification. Apparently, CMPI cross-linked HA films have a much higher cross-linking density and constructed a more rigid three-dimensional network. Therefore, it produced HA films, which dramatically increased its enzymatic stability in aqueous solution of hyaluronidase. The obtained results from elemental analyses, FT-IR spectra and NMR spectra also indicate that acylurea groups were introduced into EDC-cross-linked HA films.

An improved wound dressing with a long-term drug diffusion-efficacy has been developed by UV-radiation technique. It involves incorporation of ciprofloxacin (CIP), at the concentration of 0.5–2.0% (w/v), into a water mixture of 2-hydroxymethacrylate (HEMA) monomer, benzoin isobutyl ether (BIE) initiator and different content of ethylene glycol dimethacrylate (EGDMA) cross-linker. Increasing the concentration of EGDMA would reduce the releasing ratio of CIP from pHEMA. T1/2 is increased from 2.64 to 45.67 h when the EGDMA is added from 1 to 8%. In the ranges of $$ 0 \leq F \leq 0.6 $$ , the n value of 1%CIP-pHEMA membranes is increased from 0.48 to 0.81. It indicates that the mechanism of drug release falls between the Fickian and Case II diffusion model. The antibacterial activity of the drug impregnated into the membrane was evaluated by in vitro drug kinetic agar plate method. Higher concentration of EGDMA, up to 8% of the cross-linker, extends the drug release. Comparison with the drug-soaked membranes, the newly synthesized 1% CIP-pHEMA membrane (cross-linked with 4% EGDMA) sustains the release of the entrapped drug and maintains the antibacterial activity up to 12 days.

The 1-azaspiro[4.4]nonane portion 11 of cephalotaxine was prepared via an intramolecular S N 2' substitution reaction followed by ozonolysis; condensation of 11 with the aromatic portion 13 gave compound 15; a Friedel-Crafts cyclization of 15 in polyphosphoric acid smoothly afforded the cephalotaxine skeleton 16. A single-crystal X-ray analysis of the HCl salt of 16 confirmed the structure of 16

Studies on the solution conformation of the cyclic depsipeptide antibiotic enopeptin A have been carried out using 2D NMR and molecular modelling techniques. The proton resonances of the antibiotic in DMSO-d6 have been assigned by the use of TOCSY and ROESY experiments. The interproton distance information obtained from the ROESY experiments have been used as the basis for elucidating the probable structures in solution. The restrained molecular dynamics technique was applied to calculate the structures in solution, and six resultant structures with fewer distance constraint violations were obtained that satisfy the experimental restraints very well. The conformation of the cyclic moiety of the molecules is well defined whereas the aliphatic chain segment is disordered.

The conformation of the antibiotic echinomycin in DMSO solution has been determined from two-dimensional NMR and distance geometry calculation with distance constraints. Five converged conformations were calculated with NOE distance constraints followed by restraint energy minimization.

Synthese par reaction de cetones avec l'hexamethyldisilazone-(iodo trimethyl) silane dans CH 2 Cl 2 , suivie d'une reaction d'oxydation