Search

Fast radio bursts (FRBs) are short pulses observed in radio band from cosmological distances. One class of models invoke soft gamma-ray repeaters (SGRs), or magnetars, as the sources of FRBs. Some radio pulses have been observed from some magnetars, however, no FRB-like events had been detected in association any magnetar burst, including one giant flare. Recently, a pair of FRB-like bursts (FRB 200428 hereafter) separated by milliseconds (ms) were detected from the general direction of the Galactic magnetar SGR J1935+2154. Here we report the detection of a non-thermal X-ray burst in the 1-250 keV energy band with the Insight-HXMT satellite, which we identify as emitted from SGR J1935+2154. The burst showed two hard peaks with a separation of 34 ms, broadly consistent with that of the two bursts in FRB 200428. The delay time between the double radio and X-ray peaks is about 8.57 s, fully consistent with the dispersion delay of FRB 200428. We thus identify the non-thermal X-ray burst is associated with FRB 200428 whose high energy counterpart is the two hard peaks in X-ray. Our results suggest that the non-thermal X-ray burst and FRB 200428 share the same physical origin in an explosive event from SGR J1935+2154., 24 pages, 9 figures, 6 tables; initial submission to a journal on May 9th, 2020. Significant changes include updated localization and detailed spectral evolution of the X-ray burst, and better determination of the two narrow X-ray peaks corresponding to the two radio pulses. Conclusions are strengthened. Nature Astronomy online on Feb. 18, 2021

A black hole X-ray binary produces hard X-ray radiation from its corona and disk when the accreting matter heats up. During an outburst, the disk and corona co-evolves with each other. However, such an evolution is still unclear in both its geometry and dynamics. Here we report the unusual decrease of the reflection fraction in MAXI J1820+070, which is the ratio of the coronal intensity illuminating the disk to the coronal intensity reaching the observer, as the corona is observed to contrast during the decay phase. We postulate a jet-like corona model, in which the corona can be understood as a standing shock where the material flowing through. In this dynamical scenario, the decrease of the reflection fraction is a signature of the corona's bulk velocity. Our findings suggest that as the corona is observed to get closer to the black hole, the coronal material might be outflowing faster., 11 pages, 5 figures; published in Nature Communications; An artist's impression of Figure 5 is updated here, and the animation is available at http://youbei.work/research/

Recently, the system parameters of Cygnus X-1, i.e., the black hole mass M, the orbital inclination i and the source distance D, have been updated. As the input constraints of the continuum-fitting method, it is necessary to refine the spin with these new parameters. The Hard X-ray Modulation Telescope (HXMT, also named Insight) was successfully launched on June 15th, 2017 in China. In this work, we analyzed spectra obtained by the Insight-HXMT during 2017-2018 and re-estimated the spin via the continuum-fitting method. We first re-estimated the spin using old parameters and found the dimensionless spin parameter to be a ⁎ > 0.934 (3σ), which is consistent with previous measurements both from the continuum-fitting and iron-line fitting methods ( Gou et al. 2011 , Gou et al. 2014 ; Fabian et al. 2012 , Walton et al. 2016 , Tomsick et al. 2018 ). Then, when the new parameters were applied, we obtained an increased spin: a ⁎ > 0.967 (3σ), which is also consistent with the recent measurement (Zhao et al. 2020, submitted to ApJ) and also confirms an extreme Kerr black hole lying in this system.

We present a detailed timing study of the brightest persistent X-ray source Sco X-1 using the data collected by the Hard X-ray Modulation Telescope ( I n s i g h t -HXMT) from July 2017 to August 2018. A complete Z-track hardness-intensity diagram (HID) is obtained. The normal branch oscillations (NBOs) at ∼ 6 Hz in the lower part of the normal branch (NB) and the flare branch oscillations (FBOs) at ∼ 16 Hz in the beginning part of the flaring branch (FB) are found in observations with the Low Energy X-ray Telescope (LE) and the Medium Energy X-ray Telescope (ME) of I n s i g h t -HXMT, while the horizontal branch oscillations (HBOs) at ∼ 40 Hz and the kilohertz quasi-periodic oscillations (kHz QPOs) at ∼ 800 Hz are found simultaneously above 20 keV for the first time on the horizontal branch (HB) by the High Energy X-ray Telescope (HE) and ME. We find that for all types of the observed QPOs, the centroid frequencies are independent of energy, while the root mean square (rms) increases with energy; the centroid frequencies of both the HBOs and kHz QPOs increase along the Z-track from the top to the bottom of the HB; and the NBOs show soft phase lags increasing with energy. A continuous QPO transition from the FB to NB in ∼ 200 s are also detected. Our results indicate that the non-thermal emission is the origin of all types of QPOs, the innermost region of the accretion disk is non-thermal in nature, and the corona is nonhomogeneous geometrically.

The evidences for the influence of thermonuclear (type-I) X-ray bursts upon the surrounding environments in neutron star low-mass X-ray binaries (LMXB) were detected previously via spectral and timing analyses. Benefitting from a broad energy coverage of Insight-HXMT, we analyze one photospheric radius expansion (PRE) burst, and find an emission excess at soft X-rays. Our spectral analysis shows that, such an excess is not likely relevant to the disk reflection induced by the burst emission and can be attributed to an enhanced pre-burst/persistent emission. We find that the burst and enhanced persistent emissions sum up to exceed Eddington luminosity by ∼ 40 percentages. We speculate that the enhanced emission is from a region beyond the PRE radius, or through the Comptonization of the corona.

The Hard X-ray Modulation Telescope (HXMT) named Insight is China's first X-ray astronomical satellite, with the Low Energy X-ray Telescope (LE) as one of its main payloads onboard. The detectors of LE adopt swept charge device CCD236 using L-shaped transfer electrodes. To measure the time response distribution resulted from the continuous readout of charges in detection area along specific paths, a long exposure readout mode has been designed. In this mode, CCD236 firstly performs exposure without readout, then all charges generated in preceding exposure phase are read out completely. And an analysis of the photons readout time in this mode is carried out, to obtain the time response distribution.

The Follow-up X-ray Telescope (FXT), a key payload onboard the Einstein Probe sallite (EP), is equipped with a Wolter-I x-ray focusing mirror system. We introduce the principle of such a mirror system and analyze the influence of the mirror gap in the multishell nested mirror of the FXT on the effective area, stray-light ratio, and vignetting. To ensure that no occlusion occurs within adjacent shells and minimize stray-light ratio, the size of the gap is set to a optimized value for corresponding shell. We finished a design of a 54-shell mirror system according to these results. The optical performance of the design was then simulated using a Monte Carlo algorithm and the ray-tracing principle. The simulation shows that the effective area is 414.5 ± 0.2 cm2 at 1.25 keV (considering the spider), and the field of view is 64 arcmin in diameter. These parameters meet the optical requirements of the FXT.

The Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) satellite consists of two small satellites. Each GECAM payload contains 25 gamma ray detectors (GRD) and 8 charged particle detectors (CPD). GRD is the main detector which can detect gamma-rays and particles and localize the Gamma-Ray Bursts (GRB),while CPD is used to help GRD to discriminate gamma-ray bursts and charged particle bursts. The GRD makes use of lanthanum bromide (LaBr3) crystal readout by SiPM. As the all available SiPM devices belong to commercial grade, quality assurance tests need to be performed in accordance with the aerospace specifications. In this paper, we present the results of quality assurance tests, especially a detailed mechanism analysis of failed devices during the development of GECAM. This paper also summarizes the application experience of commercial-grade SiPM devices in aerospace payloads, and provides suggestions for forthcoming SiPM space applications., Comment: 13 pages, 23 figures

Background: Each GECAM satellite payload contains 25 gamma-ray detectors (GRDs), which can detect gamma-rays and particles and can roughly localize the Gamma-Ray Bursts (GRBs). GRD was designed using lanthanum bromide (LaBr3) crystal as the sensitive material with the rear end coupled with silicon photomultiplier (SiPM) array for readout. Purpose: In aerospace engineering design of GRD, there are many key points to be studied. In this paper, we present the specific design scheme of GRD, the assembly and the performance test results of detectors. Methods: Based on Monte Carlo simulation and experimental test results, the specific schematic design and assembling process ofGRDwere optimized. After being fully assembled, theGRDswere conducted performance tests by using radioactive source and also conducted random vibration tests. Result and conclusion: The test results show that all satellite-borne GRDs have energy resolution, 10 pages, 15 figures

Based on Insight-HXMT data, we report on the pulse fraction evolution during the 2017–2018 outburst of the newly discovered first Galactic ultraluminous X-ray (ULX) source Swift J0243.6+6124. The pulse fractions of 19 observation pairs selected in the rising and fading phases with similar luminosity are investigated. The results show a general trend of the pulse fraction increasing with luminosity and energy at supercritical luminosity. However, the relative strength of the pulsation between each pair evolves strongly with luminosity. The pulse fraction in the rising phase is larger at luminosity below 7.71 × 1038 erg s−1, but smaller at above. A transition luminosity is found to be energy independent. Such a phenomenon is first confirmed by Insight-HXMT observations and we speculate that it may have relation with the radiation-pressure-dominated accretion disc.

The Einstein Probe (EP) is an X-ray astronomical mission mainly devoting to time-domain astronomy. There are two main scientific payloads onboard EP, the Wide Field X-ray Telescope (WXT) based on the lobster eye optics and the Follow-up X-ray Telescope (FXT). FXT contains two Wolter-1 mirrors with a pnCCD detector on each focus. The total effective area is about 600 cm2 and the energy range is 0.3-10 keV. The pnCCD detector cooled by a pulse tube cooler enables high-resolution spectroscopy and imaging combined with excellent time resolution. It will also have several working modes with time resolution ranging from tens of microseconds to 50 milliseconds. Currently, the FXT is in its qualification model phase. The mirror assemblies (STM and TCM) as well as the pnCCD EM module have been manufactured and tested.

We present the observational results from a detailed timing analysis of the black hole candidate EXO 1846–031 during its outburst in 2019 with the observations of Insight-HXMT, NICER and MAXI. This outburst can be classified roughly into four different states. Type-C quasi-periodic oscillations (QPOs) observed by NICER (about 0.1–6 Hz) and Insight-HXMT (about 0.7–8 Hz) are also reported in this work. Meanwhile, we study various physical quantities related to QPO frequency. The QPO rms–frequency relationship in the energy band 1–10 keV indicates that there is a turning pointing in frequency around 2 Hz, which is similar to that of GRS 1915+105. A possible hypothesis for the relationship above may be related to the inclination of the source, which may require a high inclination to explain it. The relationships between QPO frequency and QPO rms, hardness, total fractional rms and count rate have also been found in other transient sources, which can indicate that the origin of type–C QPOs is non-thermal.

Low-frequency quasi-periodic oscillations (LFQPOs) are commonly found in black hole X-ray binaries, and their origin is still under debate. The properties of LFQPOs at high energies (above 30 keV) are closely related to the nature of the accretion flow in the innermost regions, and thus play a crucial role in critically testing various theoretical models. The Hard X-ray Modulation Telescope (Insight-HXMT) is capable of detecting emissions above 30 keV, and is therefore an ideal instrument to do so. Here we report the discovery of LFQPOs above 200 keV in the new black hole MAXI J1820+070 in the X-ray hard state, which allows us to understand the behaviours of LFQPOs at hundreds of kiloelectronvolts. The phase lag of the LFQPO is constant around zero below 30 keV, and becomes a soft lag (that is, the high-energy photons arrive first) above 30 keV. The soft lag gradually increases with energy and reaches ~0.9s in the 150-200 keV band. The detection at energies above 200 keV, the large soft lag and the energy-related behaviors of the LFQPO pose a great challenge for most currently existing models, but suggest that the LFQPO probably originates from the precession of a small-scale jet., 36 pages, 12 figures, 3 tables; published in Nature Astronomy

The Insight -Hard X-ray Modulation Telescope ( Insight -HXMT) is a broadband X-ray and γ-ray (1-3000 keV) astronomy satellite. One of its three main telescopes is the High Energy X-ray telescope (HE). The main detector plane of HE comprises 18 NaI(Tl)/CsI(Na) phoswich detectors, where NaI(Tl) is used as the primary detector to measure ~ 20-250 keV photons incident from the field of view (FOV) defined by collimators, and CsI(Na) is used as the active shielding detector to NaI(Tl) by pulse shape discrimination. Additionally, CsI(Na) is used as an omnidirectional γ-ray monitor. The HE collimators have a diverse FOV, i.e. 1.1°×5.7° (15 units), 5.7°×5.7° (2 units), and blocked (1 unit). Therefore, the combined FOV of HE is approximately 5.7°×5.7°. Each HE detector has a diameter of 190 mm resulting in a total geometrical area of approximately 5100 cm2, and the energy resolution is ~15% at 60 keV. For each recorded X-ray event by HE, the timing accuracy is less than 10 μs and the dead-time is less than 10 μs. HE is used for observing spectra and temporal variability of X-ray sources in the 20-250 keV band either by pointing observations for known sources or scanning observations to unveil new sources. Additionally, HE is used for monitoring the γ-ray burst in 0.2-3 MeV band. This paper not only presents the design and performance of HE instruments but also reports results of the on-ground calibration experiments.

As China's first X-ray astronomical satellite, the Hard X-ray Modulation Telescope (HXMT), which was dubbed as Insight-HXMT after the launch on June 15, 2017, is a wide-band (1-250 keV) slat-collimator-based X-ray astronomy satellite with the capability of all-sky monitoring in 0.2-3 MeV. It was designed to perform pointing, scanning and gamma-ray burst (GRB) observations and, based on the Direct Demodulation Method (DDM), the image of the scanned sky region can be reconstructed. Here we give an overview of the mission and its progresses, including payload, core sciences, ground calibration/facility, ground segment, data archive, software, in-orbit performance, calibration, background model, observations and some preliminary results., 29 pages, 40 figures, 6 tables, to appear in Sci. China-Phys. Mech. Astron. arXiv admin note: text overlap with arXiv:1910.04434

We report on our analysis of the 2019 outburst of the X-ray accreting pulsar 4U 1901+03 observed with Insight-HXMT and NICER. Both spectra and pulse profiles evolve significantly in the decaying phase of the outburst. Dozens of flares are observed throughout the outburst. They are more frequent and brighter at the outburst peak. We find that the flares, which have a duration from tens to hundreds of seconds, are generally brighter than the persistent emission by a factor of $\sim$ 1.5. The pulse profile shape during the flares can be significantly different than that of the persistent emission. In particular, a phase shift is clearly observed in many cases. We interpret these findings as direct evidence of changes of the pulsed beam pattern, due to transitions between the sub- and super-critical accretion regimes on a short time scale. We also observe that at comparable luminosities the flares' pulse profiles are rather similar to those of the persistent emission. This indicates that the accretion on the polar cap of the neutron star is mainly determined by the luminosity, i.e., the mass accretion rate., 11 pages, 8 figures, accepted for publication in MNRAS

LE is the low energy telescope of Insight-HXMT. It uses swept charge devices (SCDs) to detect soft X-ray photons. The time response of LE is caused by the structure of SCDs. With theoretical analysis and Monte Carlo simulations we discuss the influence of LE time response (LTR) on the timing analysis from three aspects: the power spectral density, the pulse profile and the time lag. After the LTR, the value of power spectral density monotonously decreases with the increasing frequency. The power spectral density of a sinusoidal signal reduces by a half at frequency 536 Hz. The corresponding frequency for QPO signals is 458 Hz. The Root mean square (RMS) of QPOs holds the similar behaviour. After the LTR, the centroid frequency and full width at half maxima (FWHM) of QPOs signals do not change. The LTR reduces the RMS of pulse profiles and shifts the pulse phase. In the time domain, the LTR only reduces the peak value of the crosscorrelation function while it does not change the peak position. Thus it will not affect the result of the time lag. When considering the time lag obtained from two instruments and one among them is LE, a 1.18 ms lag is expected caused by the LTR. The time lag calculated in the frequency domain is the same as that in the time domain., Comment: 11 pages, 9 figures

We report on analysis of observations of the bright transient X-ray pulsar \src obtained during its 2017-2018 giant outburst with Insight-HXMT, \emph{NuSTAR}, and \textit{Swift} observatories. We focus on the discovery of a sharp state transition of the timing and spectral properties of the source at super-Eddington accretion rates, which we associate with the transition of the accretion disk to a radiation pressure dominated (RPD) state, the first ever directly observed for magnetized neutron star. This transition occurs at slightly higher luminosity compared to already reported transition of the source from sub- to super-critical accretion regime associate with onset of an accretion column. We argue that this scenario can only be realized for comparatively weakly magnetized neutron star, not dissimilar to other ultra-luminous X-ray pulsars (ULPs), which accrete at similar rates. Further evidence for this conclusion is provided by the non-detection of the transition to the propeller state in quiescence which strongly implies compact magnetosphere and thus rules out magnetar-like fields., Submitted to MNRAS

We present a study of timing properties of the accreting pulsar 2S 1417-624 observed during its 2018 outburst, based on Swift/BAT, Fermi/GBM, Insight-HXMT and NICER observations. We report a dramatic change of the pulse profiles with luminosity. The morphology of the profile in the range 0.2-10.0keV switches from double to triple peaks at $\sim2.5$ $\rm \times 10^{37}{\it D}_{10}^2\ erg\ s^{-1}$ and from triple to quadruple peaks at $\sim7$ $\rm \times 10^{37}{\it D}_{10}^2\ erg\ s^{-1}$. The profile at high energies (25-100keV) shows significant evolutions as well. We explain this phenomenon according to existing theoretical models. We argue that the first change is related to the transition from the sub to the super-critical accretion regime, while the second to the transition of the accretion disc from the gas-dominated to the radiation pressure-dominated state. Considering the spin-up as well due to the accretion torque, this interpretation allows to estimate the magnetic field self-consistently at $\sim7\times 10^{12}$G., 7 pages, 4 figures, 1 tables, accepted for publication in MNRAS

The recently discovered neutron star transient Swift J0243.6+6124 has been monitored by {\it the Hard X-ray Modulation Telescope} ({\it Insight-\rm HXMT). Based on the obtained data, we investigate the broadband spectrum of the source throughout the outburst. We estimate the broadband flux of the source and search for possible cyclotron line in the broadband spectrum. No evidence of line-like features is, however, found up to $\rm 150~keV$. In the absence of any cyclotron line in its energy spectrum, we estimate the magnetic field of the source based on the observed spin evolution of the neutron star by applying two accretion torque models. In both cases, we get consistent results with $B\rm \sim 10^{13}~G$, $D\rm \sim 6~kpc$ and peak luminosity of $\rm >10^{39}~erg~s^{-1}$ which makes the source the first Galactic ultraluminous X-ray source hosting a neutron star., published

We present the X-ray timing results of the new black hole candidate (BHC) MAXI J1535-571 during its 2017 outburst from Hard X-ray Modulation Telescope (\emph{Insight}-HXMT) observations taken from 2017 September 6 to 23. Following the definitions given by \citet{Belloni2010}, we find that the source exhibits state transitions from Low/Hard state (LHS) to Hard Intermediate state (HIMS) and eventually to Soft Intermediate state (SIMS). Quasi-periodic oscillations (QPOs) are found in the intermediate states, which suggest different types of QPOs. With the large effective area of \emph{Insight}-HXMT at high energies, we are able to present the energy dependence of the QPO amplitude and centroid frequency up to 100 keV which is rarely explored by previous satellites. We also find that the phase lag at the type-C QPOs centroid frequency is negative (soft lags) and strongly correlated with the centroid frequency. By assuming a geometrical origin of type-C QPOs, the source is consistent with being a high inclination system., Comment: 12 pages, 11 figures, Sumbitted to ApJ

Finding the electromagnetic (EM) counterpart of binary compact star merger, especially the binary neutron star (BNS) merger, is critically important for gravitational wave (GW) astronomy, cosmology and fundamental physics. On Aug. 17, 2017, Advanced LIGO and \textit{Fermi}/GBM independently triggered the first BNS merger, GW170817, and its high energy EM counterpart, GRB 170817A, respectively, resulting in a global observation campaign covering gamma-ray, X-ray, UV, optical, IR, radio as well as neutrinos. The High Energy X-ray telescope (HE) onboard \textit{Insight}-HXMT (Hard X-ray Modulation Telescope) is the unique high-energy gamma-ray telescope that monitored the entire GW localization area and especially the optical counterpart (SSS17a/AT2017gfo) with very large collection area ($\sim$1000 cm$^2$) and microsecond time resolution in 0.2-5 MeV. In addition, \textit{Insight}-HXMT quickly implemented a Target of Opportunity (ToO) observation to scan the GW localization area for potential X-ray emission from the GW source. Although it did not detect any significant high energy (0.2-5 MeV) radiation from GW170817, its observation helped to confirm the unexpected weak and soft nature of GRB 170817A. Meanwhile, \textit{Insight}-HXMT/HE provides one of the most stringent constraints (~10$^{-7}$ to 10$^{-6}$ erg/cm$^2$/s) for both GRB170817A and any other possible precursor or extended emissions in 0.2-5 MeV, which help us to better understand the properties of EM radiation from this BNS merger. Therefore the observation of \textit{Insight}-HXMT constitutes an important chapter in the full context of multi-wavelength and multi-messenger observation of this historical GW event., Comment: accepted by Science China - Physics, Mechanics & Astronomy. Planned to publish on Oct 17, but postponed due to a problem on pdf file

We present the fabrication of submicron polyimide film sandwiched by Al film. The preparation in two-step method and spin-coating parameters of submicron polyimide film are described. To achieve self-supported structure, thick nickel mesh (ca. 200 μm) was introduced by micro-electroforming. Using negative tone photoresist SU-8 2150, the nickel grid width was demonstrated in good agreement with its original design value with optical microscopy.

An experimental setup in dark condition was established to investigate the temperature and bias voltage dependence of the Multi-Pixel Photon Counter (MPPC), one type of the SiPM developed by Hamamatsu. The dark current of an MPPC near room temperature at a given gain can be approximated by an exponential function of temperature which is similar to the behavior of a negative temperature coefficient (NTC) thermistor. According to these facts, a gain control and stabilization circuit for MPPC is developed by using a programmable current sink with temperature compensation. Detailed design and performance analysis results of the circuit in the temperature range from 5.1 degrees C to 33.3 degrees C will be discussed in this paper. (C) 2011 Elsevier B.V. All rights reserved.

The Low Energy X-ray Telescope is a main payload on the Hard X-ray Modulation Telescope satellite. The swept charge device is selected for the Low Energy X-ray Telescope. As swept charge devices are sensitive to proton irradiation, irradiation test was carried out on the HI-13 accelerator at the China Institute of Atomic Energy. The beam energy was measured to be 10 MeV at the SCD. The proton fluence delivered to the SCD was $3\times10^{8}\mathrm{protons}/\mathrm{cm}^{2}$ over two hours. It is concluded that the proton irradiation affects both the dark current and the charge transfer inefficiency of the SCD through comparing the performance both before and after the irradiation. The energy resolution of the proton-irradiated SCD is 212 eV@5.9 keV at $-60\,^{\circ}\mathrm{C}$, while it before irradiated is 134 eV. Moreover, better performance can be reached by lowering the operating temperature of the SCD on orbit.

A single-stage three-phase AC-DC converter is presented in this paper. The front semi-stage of the proposed converter, which is operated in discontinuous conduction mode (DCM), is utilized for power factor correction and the rear semi-stage of the proposed converter, which is operated in continuous conduction mode (CCM) at heavy loads and in DCM at light loads, is employed for step-down voltage conversion. The proposed converter can achieve almost unity power factor, low total harmonic distortion of input current (THD i ), and adjustable DC output voltage. The voltage stress across the DC-link capacitor is low. Moreover, the steady-state analyses of voltage gain and the boundary operating condition are discussed. Finally, experimental results are provided to verify theoretical analyses.

Readout noise is a critical parameter for characterizing the performance of charge-coupled devices (CCDs), which can be greatly reduced by the correlated double sampling (CDS) circuit. However, a conventional CDS circuit inevitably introduces new noise since it consists of several active analog components such as operational amplifiers. This paper proposes a digital CDS circuit technique, which transforms the pre-amplified CCD signal into a train of digital presentations by a high-speed data acquisition card directly without the noisy CDS circuit, then implements the digital CDS algorithm through a numerical method. A readout noise of 3.3 e(-) and an energy resolution of 121 eV@5.9 keV can be achieved via the digital CDS technique.

Charged Coupled Devices (CCDs) have been successfully used in several low energy X-ray astronomical satellites over the past two decades. Their high energy resolution and high spatial resolution make them a perfect tool for low energy astronomy, such as observing the formation of galaxy clusters and the environment around black holes. The Low Energy X-ray Telescope (LE) group is developing a Swept Charge Device (SCD) for the Hard Xray Modulation Telescope (HXMT) satellite. A SCD is a special low energy X-ray CCD, which can be read out a thousand times faster than traditional CCDs, simultaneously keeping excellent energy resolution. A test method for measuring the charge transfer efficiency (CTE) of a prototype SCD has been set up. Studies of the charge transfer inefficiency (CTI) with a proton-irradiated SCD have been performed at a range of operating temperatures. The SCD is irradiated by 3x10(8)cm(-2) 10 MeV protons.