Search

OBJECTIVE. The purpose of this study was to investigate whether early kinetic parameters derived from ultrafast dynamic contrast-enhanced MRI (DCE-MRI) using compressed sensing are associated with prognostic factors for breast cancer. MATERIALS AND METHODS. We evaluated 201 consecutive women (mean age, 54.6 years) with breast cancer (168 invasive, 33 ductal carcinoma in situ) who underwent both ultrafast DCE-MRI using compressed sensing (temporal resolution, 4.7 seconds; spatial resolution, 0.8 × 1.1 × 0.9 mm) and surgery between 2018 and 2019. Early kinetic parameters (time to enhancement [TTE] and maximum slope [MS]) were measured in breast lesions by two radiologists using a software program and were correlated with histopathologic prognostic factors. The Mann-Whitney U test and linear regression analysis were used. RESULTS. The median TTE and MS values for breast cancer were 11.9 seconds and 7.7%/s, respectively. The median MS was significantly larger in invasive cancer lesions than in ductal carcinoma in situ lesions (8.4%/s vs 4.7%/s, p 2 cm) (p = .048) and estrogen receptor-negative status (p < .001) were significantly associated with a shorter TTE. A higher histologic grade (grade 3) (p = .01) was significantly associated with a larger MS. We observed excellent interobserver agreement between two readers in the measurements of TTE and MS (intraclass correlation coefficients, 0.943 and 0.890, respectively). CONCLUSION. Ultrafast MRI-derived early enhancement parameters, such as TTE and MS, are associated with histopathologic prognostic factors in women with breast cancer.

BACKGROUND: Detecting local tumor recurrence from post-treatment changes in head and neck cancer (HNC) remains a challenge. Based on the hypothesis that post-therapeutically altered tissue is bradytroph, lower perfusion values are expected in perfusion CT (PCT) while higher perfusion values are expected in recurrent malignant tissue. OBJECTIVES: This prospective study investigates PCT for post-treatment recurrent HNC detection with a maximum slope algorithm. METHODS: A total of 80 patients who received PCT of the head and neck for post-therapy follow-up, of which 63 had no tumor recurrence and 17 presented a histopathologically confirmed recurrence were examined. Regions of interest were placed in the location of the initial tumor, in reference ipsilateral nuchal muscle tissue and the corresponding internal carotid artery. Perfusion was calculated using a single-input maximum slope algorithm. RESULTS: With PCT, recurrent HNC can be differentiated from post-treatment tissue (p 0.05). CONCLUSIONS: PCT in combination with a commercially available maximum slope algorithm offers radiologists a reliable imaging tool to detect recurrent head and neck cancer within post-therapeutically altered tissue.

Electrical Impedance Tomography (EIT) is a clinically used tool for bed-side monitoring of ventilation. Previous work also showed a high potential for lung perfusion monitoring with indicator-enhanced EIT. However, many research questions have yet to be answered before it can be broadly applied in clinical everyday life. The goal of this work is to evaluate a new method to improve EIT perfusion measurements. Pulmonary hemodynamic transfer functions were estimated using regularized deconvolution with Tikhonov regularization to estimate spatial perfusion parameters. The final comparison between EIT images and PET scans showed a median correlation of 0.897 for the images which were reconstructed using the regularized deconvolution. In comparison the previously used maximum slope method led to a median correlation of 0.868.

Title: Relationship of critical slope as an indicator of maximum metabolic steady state and climbing performance. Objectives: The aim of the diploma thesis is to find out the relationship between the critical inclination in the graded climbing test until exhaustion and the maximum performance of RP. Methods: The test involved 28 individuals (18 men and 8 women), aged 30.32 ± 8.23 years for men, 26.17 ± 2.82 years for women, performance on the scale of the Union International des Associations d'Alpinisme (UIAA) 8 men and 7 + / 8- women. Climbers underwent a graded climbing test to a subjective maximum and 3 times with a certain inclination until exhaustion. Based on a graded test, an estimate of 3 additional tendencies to exhaustion was determined. The resulting values were obtained in a formula that gave us the values of the critical slope. Subsequently, we plotted the results in two graphs and determined the correlation coefficient between the maximum slope and the difficulty of Red Point (RP) and the correlation coefficient between the critical slope and the difficulty of RP. Results: Based on the performed experiments, it was found that between the maximum slope and difficulty RP, the achieved slope is strongly negatively correlated with the value of RP (r = -0.62; p = 0.001) and within the...

OBJECTIVE To develop a method based on CT angiography and the maximum slope model (MSM) to measure regional lung perfusion in anesthetized ponies. ANIMALS 6 ponies. PROCEDURES Anesthetized ponies were positioned in dorsal recumbency in the CT gantry. Contrast was injected, and the lungs were imaged while ponies were breathing spontaneously and while they were mechanically ventilated. Two observers delineated regions of interest in aerated and atelectatic lung, and perfusion in those regions was calculated with the MSM. Measurements obtained with a computerized method were compared with manual measurements, and computerized measurements were compared with previously reported measurements obtained with microspheres. RESULTS Perfusion measurements obtained with the MSM were similar to previously reported values obtained with the microsphere method. While ponies were spontaneously breathing, mean ± SD perfusion for aerated and atelectatic lung regions were 4.0 ± 1.9 and 5.0 ± 1.2 mL/min/g of lung tissue, respectively. During mechanical ventilation, values were 4.6 ± 1.2 and 2.7 ± 0.7 mL/min/g of lung tissue at end expiration and 4.1 ± 0.5 and 2.7 ± 0.6 mL/min/g of lung tissue at peak inspiration. Intraobserver agreement was acceptable, but interobserver agreement was lower. Computerized measurements compared well with manual measurements. CLINICAL RELEVANCE Findings showed that CT angiography and the MSM could be used to measure regional lung perfusion in dorsally recumbent anesthetized ponies. Measurements are repeatable, suggesting that the method could be used to determine efficacy of therapeutic interventions to improve ventilation-perfusion matching and for other studies for which measurement of regional lung perfusion is necessary.

This work investigates the fire line evolution in canyon fire spread by analytical and experimental means. The purpose is to understand the mechanism of fire spread acceleration associated with eruptive fire in canyon terrain. A symmetrical model canyon is used for experiments, and in each test the fire is initiated by a point ignition using dead pine needles as the fuels. By experimental observations and data, three distinct types of fire line contour are identified under different central slope angles (the angle between the canyon centerline and the horizontal ground), resulting in different variation modes of rate of spread along the canyon centerline. It is found that the trace of fire head deviates from the line of maximum slope for non-zero central slope angles, and such a deviation increases with increasing central slope angle. The fire spread acceleration associated with eruptive fire occurs when the central slope angle reaches a certain critical value. Experimental data confirm that under higher slope conditions, the significant interaction between the two lateral flame fronts induces marked convective heating ahead of the flame front, which is inferred to be the potential mechanisms of eruptive fire in canyon topography. A model analysis further elucidates how the deflection of the trace of fire head, induced by the fire interaction effect, influences the acceleration of fire spread under higher slope conditions.

Excessive longitudinal deceleration and acceleration reduce driving comfort and increase safety risk. There is a dearth of research, however, on how geometric design characteristics, especially complex alignments and their adjacent segments, affect deceleration and acceleration. The Tongji University driving simulator was used to collect vehicle operation data. Deceleration and acceleration values were measured and classified as deceleration, near-cruising and acceleration. A random parameter multinomial logistic regression model was used to reflect the relationships between drivers’ deceleration and acceleration and the geometric alignments of a mountainous freeway. Vehicle speed was treated as a random slope parameter to account for the heterogeneity among subjects. Model results showed deceleration and acceleration were significantly influenced by the fixed effects of maximum curvature in the following 50 m, difference between maximum and minimum slope in the preceding 100 m, maximum slope change in the following 400 m, and maximum curvature in the preceding 50 m. These findings can assist in developing safer design and evaluation standards for mountainous freeways.

Purpose To prospectively compare the capability of dynamic first-pass contrast-enhanced (CE) perfusion MR imaging with ultra-short TE and area-detector CT (ADCT), analyzed with the same mathematical methods, and that of FDG-PET/CT for diagnosis and management of solitary pulmonary nodules (SPNs). Methods and materials Our institutional review board approved this study and written informed consent was obtained from all subjects. A total 57 consecutive patients with 71 nodules prospectively underwent dynamic CE-perfusion ADCT and MR imaging with ultra-short TE, FDG-PET/CT, as well as microbacterial and/or pathological examinations. The nodules were classified into malignant nodules (n = 45) and benign nodules (n = 26). Pulmonary arterial, systemic arterial and total perfusions were determined by means of dual-input maximum slope models on ADCT and MR imaging and maximum values of standard uptake values (SUVmax) on PET/CT. Receiver operating characteristic (ROC) analysis was performed for each index, and sensitivity, specificity and accuracy were compared by McNemar's test. Results Areas under the curve (Azs) of total perfusion on ADCT (Az = 0.89) and MR imaging (Az = 0.88) were significantly larger than those of systemic arterial perfusion and MR imaging (p Conclusion Dynamic CE-perfusion MR imaging with ultra-short TE and ADCT and have similar potential capabilities, and are superior to FDG-PET/CT in this setting.

A diode-pumped MoS2 passively Q-switched Nd:Gd0.69Y0.3NbO4 laser at 1066 nm was demonstrated for the first time. The maximum continuous (CW) wave output power of 1.77 W was obtained when the absorbed pump power was 7.28 W and the transmission of flat output coupler was 25%. The maximum slope efficiency reached 33.3%. The pulsed laser with high repetition rate was obtained when the two-dimensional (2D) MoS2 material was used as the saturable absorber. The highest repetition rate and the narrowest pulse width were reached 112 kHz and 532 ns, respectively.

The Tm3+/Ho3+-SrLaGa3O7 crystal was grown using the Czochralski (CZ) method. The absorption spectra, the fluorescence spectra around 2.0 μm and energy-transfer (ET) schemes between Tm3+ ions and Ho3+ ions has been studied. The lasing performance of Tm3+/Ho3+-SrLaGa3O7 crystal for a-cut and c-cut pumped by a fiber-coupled laser diode laser are presented in this paper. The maximum output powers of 6.15 W for a-cut crystal at 2041 nm and 2.51 W for c-cut crystal at 2044 nm have been obtained, respectively. The maximum slope efficiency in terms of absorbed pump power nearly reached 36.5% for the a-cut crystal and about 18.8% for the c-cut crystal. In addition, the width of tuning can reach about 450 nm, suggesting the potential of these crystals for ultrashort pulse generation by mode-locking.

Using data from the Sloan Digital Sky Survey Moving Object Catalog, we study color as a function of size for C-complex families in the Main Asteroid Belt to improve our understanding of space weathering of carbonaceous materials. We find two distinct spectral slope trends: Hygiea-type and Themis-type. The Hygiea-type families exhibit a reduction in spectral slope with increasing object size until a minimum slope value is reached and the trend reverses with increasing slope with increasing object size. The Themis family shows an increase in spectral slope with increasing object size until a maximum slope is reached and the spectral slope begins to decrease slightly or plateaus for the largest objects. Most families studied show the Hygiea-type trend. The processes responsible for these distinct changes in spectral slope affect several different taxonomic classes within the C-complex and appear to act quickly to alter the spectral slopes of the family members., Comment: 13 pages, 6 figures, 1 table, to be published in the Astronomical Journal

OBJECTIVE To evaluate the effect of contrast medium injection rate on CT-derived renal perfusion estimates obtained with the maximum slope method in healthy small dogs. ANIMALS 6 healthy sexually intact male purpose-bred Beagles. PROCEDURES All dogs underwent CT perfusion analysis 3 times in a crossover design, receiving a different contrast medium injection rate (1.5, 3.0, and 4.5 mL/s) each time, with a 1-week interval between imaging sessions. All CT images were obtained at the level of the left renal hilus. The time to peak aortic enhancement (TPAE) and time to initial renal venous enhancement (TIRVE) were measured from time-attenuation curves. The renal CT perfusion estimates (blood flow and blood volume) were estimated by use of the maximum slope method, which assumes no venous outflow of contrast medium during CT perfusion analysis. RESULTS The TPAE occurred at or before the TIRVE at all injection rates. Median values of estimated blood flow and blood volume did not differ significantly among injection rates. CONCLUSIONS AND CLINICAL RELEVANCE Results suggested that the assumption of no venous outflow of contrast medium during renal CT perfusion analysis with the maximum slope method was satisfied for all 3 contrast medium injection rates in the evaluated dogs. A low injection rate may be more practical than higher injection rates that require large catheters for CT perfusion analysis in small dogs such as Beagles.

Background The hemodynamics of congestion areas in the right lobe graft after living donor liver transplantation (LDLT) remains unclear. The aim of this study was to elucidate the hemodynamics of congestion areas in the right lobe graft after LDLT using computed tomography (CT) perfusion imaging and the dual-input maximum slope method. Methods Sixteen recipients underwent CT perfusion of the liver and portal phase abdominal to pelvic CT 1week after LDLT using a right lobe graft. The attenuation of segments V and VIII on the portal venous phase abdominal to the pelvic CT scan was classified into 3 categories: hyperattenuation, iso-attenuation, and hypoattenuation. Mean arterial blood flow (AF, mL/min/100 mL tissue), portal blood flow (PF, mL/min/100 mL tissue), and perfusion index (%) [PI = AF/(AF + PF) × 100] were compared between the hyperattenuation group and iso-attenuation group. The independent t test was used for these statistical analyses. Results On the portal phase abdominal scan, 15 segments, 16 segments, and 1 segment showed hyperattenuation, iso-attenuation, and hypoattenuation, respectively. The mean AF and PI of the hyperattenuation group (44.4 ± 24.4, 30.2 ± 13.5) were significantly higher than those of the iso-attenuation group (28.0 ± 7.8, 19.9 ± 6.2) (P Conclusions The congested liver segments showed high AF and high PI on CT perfusion imaging. This method enables the feasible quantification of the hemodynamics and the description of focal hemodynamic change in the graft after LDLT.

Populations are locked down during an epidemic to slow down the rate of infection so that epidemic trajectory is "flattened". This helps to keep cases at a manageable level. Given the enormous economic damage and misery caused by a lockdown, it is imperative to keep the lockdown period limited. A lockdown is useful only if it can be ensured that after the lockdown is lifted, the epidemic trajectory does not rise sharply again. We present here the results from a mathematical model of the epidemic which examines how the timing, strength and duration of the lockdown affects the post-lockdown epidemic trajectory. Our results show the following:A early lockdown (imposed when less than 1% of the population has been infected), of any reasonable duration, cannot prevent the return of the epidemic when the lockdown is lifted. The curve starts climbing soon after lifting the lockdown and reaches a peak of the same height as the no-lockdown curveThe post-lockdown trajectory can be flattened only if the lockdown is imposed after about 10% of the population has recovered after infection.The slope of the post-lockdown epidemic curve depends on the level of immunity built up in the population before and during the lockdown period. Application of lockdown around the inflexion point of the epidemic curve (the point of maximum slope of the curve) ensures that the post-lockdown curve is also flattened.

The research location is in the PPSDM Geominerba field campus. The campus is located in Padalarang, West Java that is surrounded by the open-pit mining of limestone and marble. This limestone was formed in Oligo-Miocene of Rajamandala Formation. The research objective was to determine the condition of the slopes around the campus based on geomechanical characteristics. Based on field observations, the slope angle in the area is dominated by steep slopes. The rock hardness level is dominated by hard rock with a hardness ranging from 50-100 MPa. Rock Mass Rating shows that the are a is dominated by good rocks. While the S lope Mass Rating calculation show that the maximum slope angle is between 52-75 ° . L evel of deformation and intensive weathering process will reduce the strength of the rock in the future. Several rock fall occurrences on this research area support this assumption . Yet , some local open pit mining area activity near the toe hill of the area need to be concerned regarding the effect of the local rock fall occurrences.

To assess the diagnostic utility of different perfusion algorithms for the detection of angiographical terial spasm.During a 2-year period, 45 datasets from 29 patients (54.2±10,75y, 20F) with suspected cerebral vasospasm after aneurysmal subarachnoid hemorrhage were included. Volume Perfusion CT (VPCT), Non-enhanced CT (NCT) and angiography were performed within 6hours post-ictus. Perfusion maps were generated using a maximum slope (MS) and a deconvolution-based approach (DC). Two blinded neuroradiologists independently evaluated MS and DC maps regarding vasospasm-related perfusion impairment on a 3-point Likert-scale (0=no impairment, 1=impairment affecting50%, 2=impairment affecting50% of vascular territory). A third independent neuroradiologist assessed angiography for presence and severity of arterial narrowing on a 3-point Likert scale (0=no narrowing, 1=narrowing affecting50%, 2=narrowing affecting50% of artery diameter). MS and DC perfusion maps were evaluated regarding diagnostic accuracy for angiographical arterial spasm with angiography as reference standard. Correlation analysis of angiography findings with both MS and DC perfusion maps was additionally performed. Furthermor, the agreement between MS and DC and inter-reader agreement was assessed.DC maps yielded significantly higher diagnostic accuracy than MS perfusion maps (DC:AUC=.870; MS:AUC=.805; P=0.007) with higher sensitivity for DC compared to MS (DC:sensitivity=.758; MS:sensitivity=.625). DC maps revealed stronger correlation with angiography than MS (DC: R=.788; MS: R=694;=0.001). MS and DC showed substantial agreement (Kappa=.626). Regarding inter-reader analysis, (almost) perfect inter-reader agreement was observed for both MS and DC maps (Kappa≥981).DC yields significantly higher diagnostic accuracy for the detection of angiographic arterial spasm and higher correlation with angiographic findings compared to MS.

To assess the diagnostic value and contribution to BI-RADS categorisation of initial enhancement on ultra-fast DCE-MRI for differentiating malignant and benign breast lesions. The institutional review board approved this study, and written informed consent was obtained from each participant. Both ultra-fast DCE-MRI for initial enhancement analysis and conventional MRI were performed on 200 subjects with a total of 215 lesions (147 malignant and 68 benign). BI-RADS categorisation of enhancing lesions was performed using the conventional MRI. Two initial enhancement measures, time to enhancement (TTE) and maximum slope (MS), were derived from the ultra-fast DCE-MRI. Diagnostic performance and the additional diagnostic value of adding TTE and MS to BI-RADS were evaluated. Both TTE and MS showed significant differences between malignant and benign breast lesions in masses (TTE, p

The Small Punch Test (SPT) is a miniaturized test to characterize the mechanical properties of the materials. The load-displacement curve obtained by this test does not directly provide the material parameters, and linear correlations between data obtained from SPT curve and each mechanical property are necessary. The main difficulty of these correlation methods is the high level of scattering showed when analyzing a wide set of materials in the same study.In this paper, a finite element analysis focused on steel alloys was performed to understand the specimen behavior in the early stages of the SPT. Present methods to correlate the material yield strength with the data obtained from the SPT curve were also analyzed via this FEM study to discover the meaning of the current correlation scattering for this mechanical property. This numerical research also proved the accuracy of the proposed correlation method for the yield strength via the SPT. The maximum slope of zone I (Slopeini) of the SPT curve showed an accurate correlation with this mechanical property.Focusing on steel alloys, experimental tensile tests and SPT's were performed to validate the numerical analysis and to demonstrate the suitability of the proposed Slopeini versus yield strength correlation method. Keywords: Small Punch Test, SPT, Yield strength

Purpose The aims were to analyze stiffness, ultimate force, and failure modes of a 2-piece zirconium dioxide (ZrO2) implant system. Methods Eleven 2-piece ZrO2 implants, each mounted with ZrO2 abutments plus bonded monolithic lithium disilicate (LS2) restorations, were grouped for 3.3 mm (A) and 4.1 mm (B) diameter samples. Quasi-static load was monotonically applied under a standardized test set-up (loading configuration according to DIN ISO 14801). The ultimate force was defined as the maximum force that implants are able to carry out until fracture; stiffness was measured as the maximum slope during loading. An unpaired t-test was performed between group A and B for ultimate force and stiffness (p Results Force-displacement curves revealed statistically homogenous inner-group results for all samples. Failure modes showed characteristic fractures at the neck configuration of the implants independent of the diameter. Mean stiffness was 1099 N/mm (± 192) for group A, and significantly lower compared to group B with 1630 N/mm (± 274) (p Conclusions The examined 2-piece ZrO2 implant system mounted to LS2-restorations seems to be a stable unit under in-vitro conditions with mechanical properties compared to loading capacity of physiological force. The metal-free implant reconstructions demonstrated high stiffness and ultimate force under quasi-static load for single tooth replacement under consideration of the dental indication of narrow and standard diameter implants.

The Indian Ocean humpback dolphin (Sousa plumbea), a common cetacean species in India, has a diverse vocal repertoire, which to date has not been described in detail. This study focused on analyzing their whistle vocalizations. Humpback dolphins were recorded off the Sindhudurg coast of Maharashtra, India, and 2,260 whistles were analyzed for their acoustic characteristics. Whistles spanned a wide frequency range between 2.3 kHz and 33.0 kHz, with durations ranging from 0.01 s to 1.60 s. Whistles were categorized into seven contour classes based on their qualitative properties. A classification and regression tree (CART) analysis was used to quantify variability between the seven contour classes using the measured acoustic features. Based on the CART analysis, frequency gradient, minimum slope, maximum slope, beginning and ending slope accounted for most variability between whistle types. CART resulted in an overall classification accuracy of 89.5%. This study provides a detailed description of acoustic features and qualitative properties of humpback dolphin whistles from the northwestern coast of India. Further comparisons of acoustic data from Sousa populations along the Indian coast are necessary to determine possible geographic variations in whistle characteristics and whether the variations are driven by environmental or genetic factors or a combination of both.

The work here presented is focused on defining the geometrical limitations in the manufacturing of metallic parts by the additive manufacturing (AM) technology named Laser Metal Deposition (LMD). AM techniques are often perceived by designers as able to produce parts of any level of complexity. Nevertheless, there exist limitations inherent to all AM processes, and in particular to the LMD, where geometrical distortions and other undesirable factors can be produced, this technique does not provide absolute freedom to fabricate any geometry. Part designers often lack of comprehension about these problems and their effect in the final products. The aim of this work is to approach this lack of knowledge via experimental inspection in order to quantify the geometrical limitations and identify the most common defects of the LMD. To this purpose, the research was focused in the study of inclined walls, experimentally depositing and measuring which is the maximum slope with which an inclined wall can be manufactured by LMD under different conditions

Purpose: To investigate the performance of a new semi-automatic method for analyzing the signal time-intensity curve (TIC) obtained by breast dynamic contrast enhancement (DCE)-MRI. Methods: In the conventional method, a circular region of interest was drawn manually onto the map reflecting the maximum slope of increase (MSI) to delineate the suspicious lesions. The mean TIC was determined subjectively as one of three different wash-out patterns. In the new method, the lesion area was identified semi-automatically. The mean TIC was categorized quantitatively. In addition to the MSI, other quantitative parameters were calculated, including the signal intensity slope (SIslope), initial percentage of enhancement (Einitial), percentage of peak enhancement (Epeak), early signal enhancement ratio (ESER), and second enhancement percentage (SEP). The performances were compared with receiver operating characteristic (ROC) analysis and Wilcoxon's test. Results: For TIC categorization results, the diagnostic accuracy rates were 61.54% with the traditional manual method and 76.92% with the new method. For the mean MSI values from the manual method, the accuracy was 63.41%. For the mean TIC derived using the semi-automatic method, the diagnostic accuracy were 82.05% for SIslope, 67.31% for MSI, 61.53% for Einitial, 64.75% for Epeak, 64.74% for ESER, and 52.56% for SEP, respectively. For the lesion regions identified by the semi-automatic method, the diagnostic accuracy for above mentioned parameters were 80.13%, 69.87%, 61.54%, 63.47%, 64.74% and 55.13%, respectively. Conclusion: With respect to the analysis of TIC from breast DCE-MRI, the results demonstrated that the new method increased the diagnostic accuracy, and should be considered as a supplementary tool for distinguishing benign and malignant lesions.

Results are presented for the solution of the problem of gas flow in a porous body with the presence of a temperature “step” in the range 1–100 of the non-dimensional heat-transfer coefficient, while accounting for longitudinal thermal conductivity. The problem was solved using the numerical finite difference method. Maximum slope angles were derived for temperature curves that can be used to obtain the thermal characteristics of high-compact heat transfer surfaces with the single-flow non-stationary method. Recommendations were provided regarding the range of applicability of the method, taking into account the new received results.

Objectives: Temperature dependent chemical shifts of important brain metabolites measured by localised 1H MRS were investigated to test how the use of incorrect prior knowledge on chemical shifts impairs the quantication of metabolite concentrations. Materials and methods: Phantom measurements on solutions containing 11 metabolites were performed on a 7 T scanner between 1 and 43 °C. The temperature dependence of the chemical shift differences was fitted by a linear model. Spectra were simulated for di erent temperatures and analysed by the AQSES program (jMRUI 5.2) using model functions with chemical shift values for 37 °C. Results: Large differences in the temperature dependence of the chemical shift differences were determined with a maximum slope of about ±7.5 × 10−4 ppm/K. For 32–40 °C, only minor quantification errors resulted from using incorrect chemical shifts, with the exception of Cr and PCr. For 1–10 °C considerable quantification errors occurred if the temperature dependence of the chemical shifts was neglected. Conclusion: If 1H MRS measurements are not performed at 37 °C, for which the published chemical shift values have been determined, the temperature dependence of chemical shifts should be considered to avoid systematic quantification errors, particularly for measurements on animal models at lower temperatures.

Analytical relations to describe experimentally measured traction-separation laws are often expressed in dimensionless quantities. The traction and the separation are commonly normalized using the cohesive strength and a length measure, respectively. The ratio between the fracture energy and the cohesive strength is often used as a length measure. An alternative length measure is the ratio between the cohesive strength and the maximum slope of the traction-separation law. A relation between these two length measures are established. To illustrate the implications on cohesive laws, three existing cohesive laws are rewritten using the alternative normalization. As a result it is shown that the number of unknown material parameters can be reduced. One of the derived dimensionless cohesive law is validated against experimental uniaxial tension and compression load-deformation data of different sample sizes and different quasi-brittle materials, i.e. concrete and paperboard. A good fit of the cohesive law is shown to all the investigated data. These findings indicate that the derived normalized cohesive law is independent of material directions, moisture contents and sample size.

Producción Científica, Debris cones are a very common landform in temperate high mountains. They are the most representative examples of the periglacial and nival processes. This work studies the dynamic behavior of two debris cones (Cone A and Cone B) in the Picos de Europa, in the north of the Iberian Peninsula. Their evolution was measured uninterruptedly throughout each August for 10 years (2009–2018) using the Terrestrial Laser Scanning (TLS) technique. The observations and calculations of the two debris cones were treated independently, but both showed the same behavior. Therefore, if these results are extrapolated to other debris cones in similar environments (temperate high mountain), they should show behavior similar to that of the two debris cones analyzed. Material falls onto the cones from the walls, and transfer of sediments follows linear trajectories according to the maximum slope. In order to understand the linear evolution of the two debris cones, profiles were created along the maximum slope lines of the Digital Elevation Model (DEM) of 2009, and these profile lines were extrapolated to the remaining years of measurement. In order to determine volumetric surface behavior in the DEMs, each year for the period 2009–2018 was compared. In addition, the statistical predictive value for position (Z) in year 2018 was calculated for the same planimetric position (X,Y) throughout the profiles of maximum slopes. To do so, the real field data from 2009–2017 were interpolated and used to form a sample of curves. These curves are interpreted as the realization of a functional random variable that can be predicted using statistical techniques. The predictive curve obtained was compared with the 2018 field data. The results of both coordinates (Z), the real field data, and the statistical data are coherent within the margin of error of the data collection., Fondo Europeo de Desarrollo Regional - Agencia Estatal de Investigación (grant TIN2016-76843-C4-2-R), Ministerio de Economía, Industria y Competitividad - Fondo Europeo de Desarrollo Regional (grant CGL2015-68144-R)

Pulse Transition Time (PTT) is being increasingly used for estimating blood pressure unobtrusively aiming at continuous assessment of cardiovascular diseases (CVD) and illness monitoring using portable and low-cost equipment. Several methods are available for PTT estimation, each one accepting its own constraints and physical parameters' assumptions, besides the panoply of definitions attributed to PTT calculus. Defining PTT as the time difference between the time instant were peak R occurred in an electrocardiogram (ECG) cardiac cycle and the time instant were the photoplestimography (PPG) signal of correspondent cardiac cycle presents the inflexion point of its maximum slope, a method of PTT estimation based on measured ECG and PPG signals during several cardiac cycles is proposed. This method was tested on ECG and PPG data collected from 7 individuals for periods ranging from 30 min to 8 h. For the sake of PTT algorithm performance evaluation, ECG and PPG signals were collected with a commercial system, together with the PTT signals provided by the same equipment resultant from automatic computation with unknown algorithm. Preliminary results so far obtained encourage the use of the proposed PTT estimation algorithm on future internet of things (IoT) e-health system development aiming at elderly blood pressure estimation and CVD assessment. Accuracy of the proposed algorithm (0.9 correlation with reference signal) may be improved by further studies on raw data filtering parametrizations. Fundacao para a Ciencia e TecnologiaPortuguese Foundation for Science and TechnologyEuropean Commission [SFRH/BSAB/142998/2018, SFRH/BSAB/142997/2018] Junta de Comunidades de Castilla La ManchaJunta de Comunidades de Castilla-La Mancha [SBPLY/17/180501/000392] info:eu-repo/semantics/publishedVersion