Search

Few studies have investigated unspecified or idiopathic pain associated with COIVD-19. This study aimed to provide the incidence rates of unspecified pain and idiopathic pain in patients with COVID-19 for 90 days after COVID-19 diagnosis.A propensity score matched cohort was used, including all patients with COVID-19 in South Korea, and analyzed their electronic medical records. The control group consisted of those who had not had tests for COVID-19 at all. Unspecified pain diagnoses consisted of diagnoses related to pain included in the ICD-10 Chapter XVIII. Idiopathic pain disorders included fibromyalgia, temporomandibular joint disorders, headaches, chronic prostatitis, complex regional pain syndrome, atypical facial pain, irritable bowel syndrome, and interstitial cystitis.After matching, the number of participants in each group was 7,911. For most unspecified pain, the incidences were higher in the COVID-19 group (11.7%; 95% confidence interval [CI], 11.0-12.5) than in the control group (6.5%; 95% CI, 6.0-7.1). For idiopathic pain, only the headaches had a significantly higher incidence in the COVID-19 group (6.6%; 95% CI, 6.1-7.2) than in the control group (3.7%; 95% CI, 3.3-4.1). However, using a different control group that included only patients who visited a hospital at least once for any reasons, the incidences of most unspecified and idiopathic pain were higher in the control group than in the COVID-19 group.Patients with COVID-19 might be at a higher risk of experiencing unspecified pain in the acute phase or after recovery compared with individuals who had not had tests for COVID-19.

International audience; Background: Although smoking is classified as a risk factor for severe COVID-19 outcomes, there is a scarcity of studies on prevalence of smoking during the COVID-19 pandemic. Thus, this study aims to analyze the trends of prevalence of smoking in adolescents over the COVID-19 pandemic period. Methods: The present study used data from middle to high school adolescents between 2005 and 2021 who participated in the Korea Youth Risk Behavior Web-based Survey (KYRBS). We evaluated the smoking prevalence (ever or daily) by year groups and estimated the slope in smoking prevalence before and during the pandemic. Results: A total of 1,137,823 adolescents participated in the study [mean age, 15.04 years [95% confidence interval (CI) 15.03–15.06]; and male, 52.4% (95% CI 51.7–53.1)]. The prevalence of ever smokers was 27.7% (95% CI 27.3–28.1) between 2005 and 2008 but decreased to 9.8% (95% CI 9.3–10.3) in 2021. A consistent trend was found in daily smokers, as the estimates decreased from 5.4% (95% CI 5.2–5.6) between 2005 and 2008 to 2.3% (95% CI 2.1–2.5) in 2021. However, the downward slope in the overall prevalence of ever smokers and daily smokers became less pronounced in the COVID-19 pandemic period than in the pre-pandemic period. In the subgroup with substance use, the decreasing slope in daily smokers was significantly more pronounced during the pandemic than during the pre-pandemic period. Conclusions: The proportion of ever smokers and daily smokers showed a less pronounced decreasing trend during the pandemic. The findings of our study provide an overall understanding of the pandemic’s impact on smoking prevalence in adolescents. [MediaObject not available: see fulltext.]

Background Genomic instability is a hallmark of various cancers, and DNA repair is an essential process for maintaining genomic integrity. Mammalian cells have developed various DNA repair mechanisms in response to DNA damage. Compared to the cellular response to DNA damage, the in vivo DNA damage response (DDR) of specific tissues has not been studied extensively. Objective In this study, mice were exposed to whole-body gamma (γ)-irradiation to evaluate the specific DDR of various tissues. We treated male C57BL6/J mice with γ-irradiation at different doses, and the DDR protein levels in different tissues were analyzed. Results The level of gamma-H2A histone family member X (γH2AX) increased in most organs after exposure to γ-irradiation. In particular, the liver, lung, and kidney tissues showed higher γH2AX induction upon DNA damage, compared to that in the brain, muscle, and testis tissues. RAD51 was highly expressed in the testis, irrespective of irradiation. The levels of proliferating cell nuclear antigen (PCNA) and ubiquitinated PCNA increased in lung tissues upon irradiation, suggesting that the post-replication repair may mainly operate in the lungs in response to γ-irradiation. Conclusion These results suggest that each tissue has a preferable repair mechanism in response to γ-irradiation. Therefore, the understanding and application of tissue-specific DNA damage responses could improve the clinical approach of radiotherapy for treating specific cancers.

Structural optimization of microwire arrays is important for the successful demonstration of the practical feasibility of radial junction crystalline silicon (c-Si) solar cells. In this study, we investigated an optimized design of tapered microwire (TMW) arrays to maximize the light absorption of c-Si solar cells, while minimizing the surface recombination, for simultaneously improving the open-circuit voltage and short-circuit current density (Jsc). Finite-difference time-domain simulations confirmed that controlling the spacing between the TMWs at the nanometer scale is more effective for increasing the light absorption than increasing the TMW length. The photogenerated current of a c-Si TMW array with a 200 nm spacing was calculated to be 42.90 mA/cm2, which is close to the theoretical limit of 43.37 mA/cm2 in the 300-1100 nm wavelength range. To experimentally demonstrate the TMW arrays with a nanometer-scale spacing of 200 nm, which cannot be realized by conventional photolithography, we utilized a soft lithography method based on polystyrene beads for patterning a c-Si wafer. The solar cells based on optimized TMW arrays exhibited a Jsc of 42.5 mA/cm2 and power conversion efficiency of 20.5%, which exceed those of the previously reported microwire-based radial junction solar cells.

In a new era of mobility where the transportation of persons or goods via flying vehicles over urban areas has garnered great interest. As a first step to assess the feasibility of Urban Air Mobility (UAM) in urban areas, we conduct regionalization and correspondence analysis in highly urbanized areas – San Francisco, CA and Manhattan, NY – by incorporating population dataset and urban 3D airspace to delineate the regional boundaries. Regionalization is carried out using graph-based clustering technique called SKATER (Spatial ‘K’luster Analysis by Tree Edge Removal) to group the regions having similar characteristics and address the compound effect of both population and spatial information. By classifying the regions into five categories through correspondence analysis, the operational and economic feasibility of each region is evaluated. The results provide the region maps of each city with the most and least attractive regions for UAM application with the temporal notion, whether the clusters are daytime-intensive or nighttime-intensive areas. Our approach can contribute to providing a useful basis for management for UAM in urban areas as well as the process of regulating airspace use.

Silicon microwires are very promising candidates for next-generation solar cells. Si microwires achieve strong broadband light absorption, acting as an antireflection coating layer. In addition to superior optical properties, Si microwires can effectively separate and collect photocarriers at the radial junction owing to a short diffusion length (equal to the microwire radius). This factor can relax the requirement for high-quality materials, enabling a reduction in the cost of producing solar cells. In this report, we review recent progress in vertically aligned Si microwire solar cells with reference to (1) optimized microwire structures to enhance light absorption, (2) uniform radial junctions for effective carrier separation, (3) minimization of surface recombination through surface treatments, and (4) fine metal electrodes for efficient carrier collection. In addition, we present studies on flexible crystalline Si solar cells that use mechanically flexible Si microwires. Furthermore, based on each fabrication process, we discuss the challenges related to the realization of high-efficiency Si microwire solar cells.

Summary Crystalline silicon (c-Si) is not used for developing transparent photovoltaics, owing to its opaque nature. Furthermore, adding optical transparency to a conventional c-Si wafer is one of the most challenging problems in this field. Here, we demonstrate the development of a neutral-colored transparent c-Si substrate using a 200-μm-thick c-Si wafer, which is known to be intrinsically opaque. Transparent c-Si substrates were fabricated by placing microhole-shaped light transmission windows on a bare c-Si wafer. These windows were designed to enable the transmission of all incident visible light through the substrate, resulting in a colorless substrate. A light absorption area was also designed on the wafer to efficiently absorb incident light. As a representative application, solar cells fabricated using the neutral-colored transparent c-Si substrate showed a power conversion efficiency of up to 12.2%. Therefore, our transparent c-Si solar cells present a unique opportunity to develop next-generation colorless transparent photovoltaics.

An ideal cancer therapeutic strategy involves the selective killing of cancer cells without affecting the surrounding normal cells. However, researchers have failed to develop such methods for achieving selective cancer cell death because of shared features between cancerous and normal cells. In this study, we have developed a therapeutic strategy called the cancer-specific insertions-deletions (InDels) attacker (CINDELA) to selectively induce cancer cell death using the CRISPR-Cas system. CINDELA utilizes a previously unexplored idea of introducing CRISPR-mediated DNA double-strand breaks (DSBs) in a cancer-specific fashion to facilitate specific cell death. In particular, CINDELA targets multiple InDels with CRISPR-Cas9 to produce many DNA DSBs that result in cancer-specific cell death. As a proof of concept, we demonstrate here that CINDELA selectively kills human cancer cell lines, xenograft human tumors in mice, patient-derived glioblastoma, and lung patient-driven xenograft tumors without affecting healthy human cells or altering mouse growth.

In this study, preclinical experiments were performed with an in-house developed prototypal photon-counting detector computed tomography (PCD CT) system. The performance of the system was compared with the conventional energy-integrating detector (EID)-based CT, concerning the basic image quality biomarkers and the respective capacities for material separation. The pre- and the post-contrast axial images of a canine brain captured by the PCD CT and EID CT systems were found to be visually similar. Multi-energy images were acquired using the PCD CT system, and machine learning-based material decomposition was performed to segment the white and gray matters for the first time in soft tissue segmentation. Furthermore, to accommodate clinical applications that require high resolution acquisitions, a small, native, high-resolution (HR) detector was implemented on the PCD CT system, and its performance was evaluated based on animal experiments. The HR acquisition mode improved the spatial resolution and delineation of the fine structures in the canine’s nasal turbinates compared to the standard mode. Clinical applications that rely on high-spatial resolution expectedly will also benefit from this resolution-enhancing function. The results demonstrate the potential impact on the brain tissue segmentation, improved detection of the liver tumors, and capacity to reconstruct high-resolution images both preclinically and clinically.

In a new era of mobility where the transportation of persons or goods via flying vehicles over urban areas has garnered great interest in its application in urban space. With the anticipated utilization of sUAS in urban airspace, a multi-dimensional understanding of urban space is essential. As a first step to assess the feasibility of Urban Air Mobility (UAM) in urban areas, we conduct regionalization and correspondence analysis in highly urbanized areas – San Francisco, CA and Manhattan, NY – by incorporating population dataset and urban 3D airspace to delineate the regional boundaries. Regionalization is carried out using graph-based clustering technique called SKATER (Spatial ‘K’luster Analysis by Tree Edge Removal) to group the regions having similar characteristics and address the compound effect of both population and spatial information. By classifying the regions into five categories through correspondence analysis, the operational and economic feasibility of each region is evaluated. The results provide the region maps of each city with the most and least attractive regions for UAM application with the temporal notion, whether the clusters are daytime-intensive or nighttime-intensive areas. The outcomes have several unique information that can benefit drone delivery target area identification, landing location identification, demand prediction. Our approach can contribute to providing a useful basis for management for UAM in urban areas as well as the process of regulating airspace use.

The recent growth in small unmanned aerial vehicle (sUAV) applications in public and private sectors has generated a greater interest in effective collision avoidance strategies. This paper presents a cooperative collision avoidance approach for sUAV in the low-altitude uncontrolled airspace based on satisficing game theory. By incorporating both the self and cooperative preferences in making individual heading decision, satisficing framework provides a collision avoidance strategy that increases throughput while decreasing unnecessary collisions. A total of 4356 chokepoint scenarios are simulated with varying satisficing parameters, including number of sUAV agents, minimum separation, action angle, and dual utility parameters of raw preference and negotiation index. Simulation-based sensitivity analysis is conducted to find the combined effect of such parameters. The results show that performance of satisficing framework is dependent on traffic density primarily. Except for the very light traffic scenario, the minimum separation and degree of action angle affected the system efficiency the most, while dual utility parameters played crucial roles in highly conflicted scenarios. In conclusion, sUAV traffic and collision rules require an adaptive approach in regard to the traffic density, and satisficing framework can provide an effective collision avoidance strategy in a medium- to high-density traffic environment.

Summary Transparent photovoltaics (TPVs), which combine visible transparency and solar energy conversion, are being developed for applications in which conventional opaque solar cells are unlikely to be feasible, such as windows of buildings or vehicles. In this paper, we review recent progress in TPVs along with strategies that enable the transparency of conventional photovoltaics, including thin-film technology, selective light-transmission technology, and luminescent solar concentrator technology. From fundamental research to commercialization of the TPV, three main perspectives should be considered: (1) high-power conversion efficiency at the same average visible transmittance; (2) aesthetic factors, which should not detract from applications such as buildings and vehicles; and (3) feasibility for real-world applications, including modularization and stability evaluation. We present the distinct analysis criteria for these main perspectives and discuss their importance. We also discuss possible research directions for the commercialization of TPVs.

We aim to assess whether the number of newly diagnosed dementia increases and whether comorbid psychiatric symptoms of patients with dementia worsen, in people who were tested for COVID-19. We used electronic medical records from a nationwide cohort consisting of people who tested positive (positive group), tested negative (negative group), and those who did not receive the test (control group) for COVID-19. For people with neither a history of dementia nor mild cognitive disorder (MCI), the negative group was more likely to develop dementia than the control group, and less likely to develop MCI than the positive group. For people who already had dementia, the negative group was more likely to develop comorbid psychiatric disorders than the control group, but less likely than the positive group. These findings suggest the necessity of managing mental health not only for patients with COVID-19 but also for people who tested negative for COVID-19.

Poly(ADP-ribose) polymerase 1 (PARP1) facilitates DNA damage response (DDR). While the Ewing's sarcoma breakpoint region 1 (EWS) protein fused to FLI1 triggers sarcoma formation, the physiological function of EWS is largely unknown. Here, we investigate the physiological role of EWS in regulating PARP1. We show that EWS is required for PARP1 dissociation from damaged DNA. Abnormal PARP1 accumulation caused by EWS inactivation leads to excessive Poly(ADP-Ribosy)lation (PARylation) and triggers cell death in both in vitro and in vivo models. Consistent with previous work, the arginine-glycine-glycine (RGG) domain of EWS is essential for PAR chain interaction and PARP1 dissociation from damaged DNA. Ews and Parp1 double mutant mice do not show improved survival, but supplementation with nicotinamide mononucleotides extends Ews-mutant pups' survival, which might be due to compensatory activation of other PARP proteins. Consistently, PARP1 accumulates on chromatin in Ewing's sarcoma cells expressing an EWS fusion protein that cannot interact with PARP1, and tissues derived from Ewing's sarcoma patients show increased PARylation. Taken together, our data reveal that EWS is important for removing PARP1 from damaged chromatin.

We optimize the thickness of a transparent conducting oxide (TCO) layer, and apply a microscale mesh-pattern metal electrode for high-efficiency a-Si/c-Si heterojunction solar cells. A solar cell equipped with the proposed microgrid metal electrode demonstrates a high short-circuit current density (JSC) of 40.1 mA/cm(2), and achieves a high efficiency of 18.4% with an open-circuit voltage (VOC) of 618 mV and a fill factor (FF) of 74.1% as result of the shortened carrier path length and the decreased electrode area of the microgrid metal electrode. Furthermore, by optimizing the process sequence for electrode formation, we are able to effectively restore the reduction in VOC that occurs during the microgrid metal electrode formation process. This work is expected to become a fundamental study that can effectively improve current loss in a-Si/c-Si heterojunction solar cells through the optimization of transparent and metal electrodes.

We developed a unique nano- and microwire hybrid structure by selectively modifying only the tops of microwires using metal-assisted chemical etching. The proposed nano/micro hybrid structure not only minimizes surface recombination but also absorbs 97% of incident light under AM 1.5G illumination, demonstrating outstanding light absorption compared to that of planar (59%) and microwire arrays (85%). The proposed hybrid solar cells with an area of 1 cm(2) exhibit power conversion efficiencies (Eff) of up to 17.6% under AM 1.5G illumination. In particular, the solar cells show a high short-circuit current density (Jsc) of 39.5 mA cm(-2) because of the high light-absorbing characteristics of the nanostructures. This corresponds to an approximately 61.5% and 16.5% increase in efficiency compared to that of a planar silicon solar cell (Eff = 10.9%) and a microwire solar cell (Eff = 15.1%), respectively. Therefore, we expect the proposed hybrid structure to become a foundational technology for the development of highly efficient radial junction solar cells.

Background The duration of antidepressant use affects the treatment of depression. Using the National Health Insurance database, which covers almost the entire national population, we verified the factors associated with the inadequate short-term use of initially prescribed antidepressants and their effects on the relapse and recurrence of depressive episodes. Methods There were 752,190 patients included who had been newly prescribed antidepressants in 2012 with the diagnosis of depressive disorder. They were followed-up until December 31, 2015. They were classified as short-term and long-term antidepressant users depending on whether they used a specific initial antidepressant for at least four weeks. Sociodemographic, clinical, and medical utilization factors affecting the duration of antidepressant use were investigated. We also identified whether the duration of antidepressant use affected the risk of relapse and recurrence, which was defined by the restarting of antidepressants. Results Initial antidepressants were taken for less than 28 days by 458,057 (60.84%) patients. Tricyclic antidepressants were used as the initial antidepressant more frequently than selective serotonin reuptake inhibitors (64.5% versus 19.3%). The type of initial antidepressant, polypharmacy, psychiatric and medical comorbidities, type of insurance coverage, and type of medical institution visited were associated with short-term use. Short-term use marginally increased the risk of relapse and recurrence of depressive episodes (Hazard ratio: 1.06, 95% confidence intervals 1.048–1.075). Conclusions Short-term antidepressant use is widespread in Korea, and assessment in various aspects are necessary to set proper treatment plans.

BackgroundThe epidemiology of pharmaceutically treated depression (PTD) and treatment resistant depression (TRD) is largely unknown in South Korea. The aim of this study was to develop a greater understanding of the characteristics of PTD and TRD in nearly the entire adult population in South Korea using the Health Insurance Review and Assessment Service (HIRA).MethodDiagnostic codes and prescription data for South Korean adults were extracted from the HIRA. Subjects were included in the PTD cohort if they received at least one prescription for antidepressants and were diagnosed with depression. TRD was defined as PTD having two or more regimen failures of antidepressants or antipsychotics.ResultsIn 2012, there were 41,256,396 adults in South Korea with 834,694 meeting the criteria for PTD (2.0%). Among subjects with PTD, 57% stopped treatment in less than 28 days of antidepressant supply. Tricyclic and tetracyclic antidepressants were the most frequently used antidepressants as a first-line regimen for PTD (44.3% of PTD) followed by selective serotonin reuptake inhibitors (32.1% of PTD). Results also indicated that 34,812 subjects developed TRD (4.2% of PTD). Median PTD and TRD durations were 28 and 623 days respectively. Proportions of psychiatric and non-psychiatric comorbidities were higher in TRD cases than in PTD cases that were not treatment resistant.ConclusionsDespite a small proportion of patients with TRD, the prolonged duration of illness and higher comorbidity implies the need for better treatment.

We demonstrate novel all-back-contact Si nanohole solar cells via the simple direct deposition of molybdenum oxide (MoOx) and lithium fluoride (LiF) thin films as dopant-free and selective carrier contacts (SCCs). This approach is in contrast to conventionally used high-temperature thermal doping processes, which require multistep patterning processes to produce diffusion masks. Both MoOx and LiF thin films are inserted between the Si absorber and Al electrodes interdigitatedly at the rear cell surfaces, facilitating effective carrier collection at the MoOx/Si interface and suppressed recombination at the Si and LiF/Al electrode interface. With optimized MoOx and LiF film thickness as well as the all-back-contact design, our 1 cm(2) Si nanohole solar cells exhibit a power conversion efficiency of up to 15.4%, with an open-circuit voltage of 561 mV and a fill factor of 74.6%. In particular, because of the significant reduction in Auger/surface recombination as well as the excellent Si-nanohole light absorption, our solar cells exhibit an external quantum efficiency of 83.4% for short-wavelength light (∼400 nm), resulting in a dramatic improvement (54.6%) in the short-circuit current density (36.8 mA/cm(2)) compared to that of a planar cell (23.8 mA/cm(2)). Hence, our all-back-contact design using MoOx and LiF films formed by a simple deposition process presents a unique opportunity to develop highly efficient and low-cost nanostructured Si solar cells.

We conducted ink-jet printing of copper (Cu) conductive ink on polyimide (PI) film to form Cu conductive patterns and determine the correlation between Cu ink based on Cu complex and flexible substrate. First, the oxygen plasma treatment was performed to modify the surface property of the PI film, and contact angles were measured to confirm the change of its surface property. Thus, we confirmed the decrease of contact angles and optimized plasma treatment parameters. Then Cu conductive lines were formed on unmodified and modified PI films using ink-jet printing, and the printed lines were reduced and sintered by thermal treatment in hydrogen (H 2 ) atmosphere at 200 °C. The formed Cu conductive lines were analyzed by an optical microscope (OM), a field emission scanning electron microscope (FE-SEM), an X-ray diffractometer (XRD), a non-contact 3D Profiler, and a four-point probe to confirm the shape, microstructure, crystal structure of conductive lines, and electrical conductivity. The continuous lines having pure Cu phase and well-sintered microstructure were successfully formed on PI substrate modified by oxygen plasma treatment and the correlation between Cu ink and substrate surface property was determined.

Recent studies have uncovered an unexpected relationship between factors that are essential for germline development in Drosophila melanogaster: the arginine protein methyltransferase 5 (dPRMT5/Csul/Dart5) and its cofactor Valois, methylate the Piwi family protein Aub, enabling it to bind Tudor. The RNA helicase Vasa is another essential protein in germline development. Here, we report that mouse (mouse Vasa homolog), Xenopus laevis, and D. melanogaster Vasa proteins contain both symmetrical and asymmetrical dimethylarginines. We find that dPRMT5 is required for the production of sDMAs of Vasa in vivo. Furthermore, we find that the mouse Vasa homolog associates with Tudor domain-containing proteins, Tdrd1 and Tdrd6, as well as the Piwi proteins, Mili and Miwi. Arginine methylation is thus emerging as a conserved and pivotal post-translational modification of proteins that is essential for germline development.

A systematic study was conducted into the use of metal-assisted chemical etching (MacEtch) to fabricate vertical Si microwire arrays, with several models being studied for the efficient redox reaction of reactants with silicon through a metal catalyst by varying such parameters as the thickness and morphology of the metal film. By optimizing the MacEtch conditions, high-quality vertical Si microwires were successfully fabricated with lengths of up to 23.2 μm, which, when applied in a solar cell, achieved a conversion efficiency of up to 13.0%. These solar cells also exhibited an open-circuit voltage of 547.7 mV, a short-circuit current density of 33.2 mA/cm2 and a fill factor of 71.3% by virtue of the enhanced light absorption and effective carrier collection provided by the Si microwires. The use of MacEtch to fabricate high-quality Si microwires therefore presents a unique opportunity to develop cost-effective and highly efficient solar cells.

Copper (Cu) nanoparticles as the metal nanoparticles in the conductive ink were synthesized using electrochemical reaction. This method is characterized as the synthesis process without any metal salts and the post-treatment of washing and drying. It means that it does not need to consider about oxidized and agglomerated metal nanoparticles during the extra treatments. The Cu nanoparticles were synthesized in the various conditions of electrolyte to investigate the mechanism of the synthesis reaction of Cu nanoparticles. And also, the synthesized Cu nanoparticles were controlled the dispersion stability with the addition of dispersion agent such as PVP and Dextran. Finally, it was achieved the ink-jet printed Cu patterns using the synthesized Cu nanoparticles, and examined the morphology of the patterns.

Piwi family proteins are essential for germline development and bind piwi-interacting RNAs (piRNAs 1 2 3). The grandchildless gene aub of Drosophila melanogaster encodes the piRNA-binding protein Aub that is essential for formation of primordial germ cells (PGCs) 4. Here we report that mouse, Xenopus laevis and Drosophila melanogaster Piwi family proteins contain symmetrical dimethylarginines (sDMAs). We find that Piwi proteins are expressed in X. laevis oocytes and we identify numerous X. laevis piRNAs. We report that the Drosophila homolog of protein methyltransferase 5 (dPRMT5, csul/dart5), which is also the product of a grandchildless gene 5, 6, is required for arginine methylation of Drosophila Piwi, Ago3 and Aub proteins, in vivo. Loss of dPRMT5 activity leads to reduction of piRNAs and in particular of Ago3 and Aub protein levels and accumulation of retrotransposons in the Drosophila ovary. Our studies explain the relationship between aub and dPRMT5 (csul/dart5) genes by demonstrating that dPRMT5 is the enzyme that methylates Aub. Our findings underscore the significance of sDMA modification of Piwi proteins in the germline and suggest an interacting pathway of genes that are required for piRNA function and PGC specification.