Search

A mass spectrometric platform was built for in-depth profiling of mutational landscape of cis-diol metabolites from the healthy to primary liver cancer (PLC) patients. This method enabled more precise PLC diagnosis than protein marker-based methods.

The water droplets on the surface of the overhead line (OHL) conductors are subject to an intensive electric field, which induces electric force on the charged liquid surface. Under the combined action of the surface tension as well as the electric force, movement and deformation can be observed on those water droplets. These result in a re-distribution of charge density on the liquid surface and therefore a re-distribution of electric force. In this paper, in order to strengthen the understanding of this complex multi-physics problem of interaction and mutual coupling, the vibration characteristics of water droplets under alternating electric fields is studied using the finite element method (FEM). Parameters such as the volume size of the water droplet, static/dynamic contact angle between the water droplet and conductor surface and voltage level are studied in relation to the vibration characteristics. The reproducible correlation between the phase and amplitude of the water droplet vibration on the surface of the conductor and the applied voltage is established. According to the calculated instantaneous electric field strength, it is explained that protrusions such as water droplets are the starting point of corona discharge.

Accurately analysing the particular glycosylation status of protein biomarkers is of significant importance in the precise, early diagnosis of cancer. Existing methods mainly rely on the use of antibodies and lectins. However, due to the macroscopic and microscopic heterogeneity of glycans, precise analysis of glycosylation status still remains a challenge. Molecularly imprinted polymers (MIPs), as a synthetic alternative to antibodies or lectins, may provide new solutions but have not yet been explored. Herein, we report an appealing strategy called triple MIP-based plasmonic immunosandwich assay (triMIP-PISA) for precise cancer diagnosis in terms of the relative glycosylation expression of glycoprotein biomarkers. As proof of the principle, alpha fetoprotein (AFP), which has been used as a clinical biomarker for early detection of hepatocellular carcinoma (HCC), as well as its

For the past few years, organic-inorganic hybrid nanocarriers have been widely explored for effective drug delivery and preferable disease treatments. In this article, hydrothermal method was utilized to prepare fine dispersed layered double hydroxide (Mg-Al LDH) suspension. Polyethylene glycol (PEG) was grafted on the surface of LDH lamella in order to improve the dispersibility of LDH. Besides, the anti-cancer drug gemcitabine was grafted on the surface of LDH lamellas through chemical grafting. Hence a novel new type of organic-inorganic hybrid drug delivery system LDH-mPEG-Gemcitabine was obtained. In addition, the siRNA was intercalated into the LDH interlamination by ion exchange method to realize drug and gene co-delivery. The loading capacity of LDH and LDH-mPEG-Gemcitabine was evaluated by agarose gel electrophoresis. The characterization by laser particle size analyzer, TEM, FT-IR, XRD

Chemodynamic therapy (CDT) that kills tumor cells by converting low-reactivity H

Infectious virus diseases, particularly coronavirus disease 2019, have posed a severe threat to public health, whereas the developed therapeutic and prophylactic strategies are seriously challenged by viral evolution and mutation. Therefore, broad-spectrum inhibitors of viruses are highly demanded. Herein, an unprecedented antiviral strategy is reported, targeting the viral glycan shields with hypervalent mannose-binding nanoparticles. The nanoparticles exhibit a unique double-punch mechanism, being capable of not only blocking the virus-receptor interaction but also inducing viral aggregation, thereby allowing for inhibiting the virus entry and facilitating the phagocytosis of viruses. The nanoparticles exhibit potent and broad-spectrum antiviral efficacy to multiple pseudoviruses, including severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its major variants (D614G, N501Y, N439K, Δ69-70, Delta, and Omicron; lentiviruses expressing only the spike proteins), as well as other vital viruses (human immunodeficiency virus 1 and Lassa virus), with apparent EC50 values around the 10

Exploring new targets and developing novel targeted therapies are urgently needed for neuroblastoma therapy. Polysialic acid (polySia), a linear homopolymer of sialic acid units that correlates well with tumor progression and poor prognosis, has emerged as a potential target for neuroblastoma. However, the lack of polySia-specific binding reagents has severely limited the development of polySia-targeting therapeutics for neuroblastoma. Herein, the construction of polySia-targeting nanomissiles via molecular imprinting for the photothermal therapy of neuroblastoma is reported. Oligosialic acid (oligoSia) containing 3-4 units is considered as a characteristic structure for the recognition of polySia, while oligoSia containing 4-7 units digested from polySia is employed as the template. Via boronate-affinity controllable oriented surface imprinting, oligoSia-imprinted nanoparticles (oSia-MIP) are prepared. The oSia-MIP allows for specifically recognizing polySia and targeting polySia overexpressed neuroblastoma cells in vitro and in vivo. oSia-MIP loaded with indocyanine green is prepared and experimentally demonstrated to be a potent targeted photothermal therapeutic for neuroblastoma. Equipping the core substrate with functional entities, the developed polySia targeting nanoplatform can be accommodated to various therapeutic modalities, holding great promise for neuroblastoma targeted therapy.

Blocking the PD-1/PD-L1 immune checkpoint has emerged as a promising strategy in cancer immunotherapy, in which monoclonal antibodies are predominately used as inhibitors. Despite their remarkable success, monoclonal antibody-based therapeutics suffer from drawbacks due to the use of antibodies, such as high cost, low stability and high frequency of immune-related adverse effects. Therefore, novel anti-PD-1/PD-L1 therapeutics that can address these issues are of significant importance. Herein, we report a molecularly imprinted polymer (MIP) based PD-1 nano inhibitor for blocking the PD-1/PD-L1 axis. The anti-PD-1 nanoMIP was rationally designed and engineered by epitope imprinting using the N-terminal epitope of PD-1 as the binding site. The anti-PD-1 nanoMIP showed good specificity and high affinity towards PD-1, yielding a disassociation constant at the 10

The ATP-binding cassette, subfamily G, isoform 2 protein (ABCG2), as an important member of ABC transporters, plays a key role in multidrug resistance (MDR) in cancer and has been widely considered as a marker of cancer stem cells (CSC). Reagents capable of simultaneously targeting ABCG2 and reversing MDR have great clinical application values, but their development is highly challenging. Herein, ABCG2 glycosylated extracellular region-binding aptamers were efficiently screened by a cladded molecularly imprinted polymer (cMIP)-based in vitro screening method and further rationally engineered into cyclic bivalent aptamers. Experiments showed that both the monovalent and cyclic bivalent aptamers could specifically bind ABCG2 and thereby specially target CSC of human colorectal carcinomas (CoCSC), while the latter could effectively reverse MDR in drug-resistant liver cancer cells (HepG2/ADR). Different from currently predominant small molecule inhibitors, the reversal of MDR relied on a different mechanism; the cyclic bivalent aptamers bound the two monomers of ABCG2 dimers simultaneously and thereby blocked the ABCG2-mediated drug-pumping channel, resulting in increased intracellular accumulation of substrate drugs. This study opened a new access to the development of affinity reagents for targeting CSC and reversing MDR, holding great prospects in cancer diagnosis and treatment.

Prodrug and drug delivery systems are two effective strategies for improving the selectivity of chemotherapeutics. Molecularly imprinted polymers (MIPs) have emerged as promising carriers in targeted drug delivery for cancer treatment, but they have not yet been integrated with the prodrug strategy. Reported here is an MIP‐based smart prodrug delivery system for specific targeting, prolonged retention time, and tumor microenvironment‐triggered release. 5′‐Deoxy‐5‐fluorocytidine (DFCR) and sialic acid (SA) were used as a prodrug and a marker for tumor targeting, respectively. Their co‐imprinted nanoparticles were prepared as a smart carrier. Prodrug‐loaded MIP specifically and sustainably accumulated at the tumor site and then gradually released. Unlike conventional prodrug designs, which often require in‐liver bioconversion, this MIP‐based prodrug delivery is liver‐independent but tumor‐dependent. Thus, this study opens new access to the development of smart prodrug delivery nanoplatforms., A molecularly imprinted polymer (MIP) based smart prodrug delivery nanoplatform was demonstrated with the ability to specifically target tumor sites with prolonged retention time and gradual tumor microenvironmental pH‐triggered release. The MIP‐based prodrug delivery is liver‐independent but tumor‐dependent, which not only greatly enhances tumor specificity but also expands the scope of applicable prodrugs.

Molecularly imprinted polymers (MIPs) are chemically synthesized affinity materials with tailor‐made binding cavities complementary to the template molecules in shape, size, and functionality. Recently, engineering MIP‐based nanomedicines to improve cancer therapy has become a rapidly growing field and future research direction. Because of the unique properties and functions of MIPs, MIP‐based nanoparticles (nanoMIPs) are not only alternatives to current nanomaterials for cancer therapy, but also hold the potential to fill gaps associated with biological ligand‐based nanomedicines, such as immunogenicity, stability, applicability, and economic viability. Here, we survey recent advances in the design and fabrication of nanoMIPs for cancer therapy and highlight their distinct features. In addition, how to use these features to achieve desired performance, including extended circulation, active targeting, controlled drug release and anti‐tumor efficacy, is discussed and summarized. We expect that this minireview will inspire more advanced studies in MIP‐based nanomedicines for cancer therapy., This minireview surveys recent advances in research on molecularly imprinted polymer nanoparticles (nanoMIPs) for cancer therapy and highlights the distinct features of nanoMIPs for the rational design and construction of cancer nanomedicines with desired performances, including extended circulation, active targeting, controlled drug release, and antitumor efficacy.

Laser desorption ionization mass spectrometry (LDI-MS) has been developed to be an essential tool for the analysis and identification of a large variety of species, ranging from small metabolites, drugs and pollutants to peptides and proteins and even to bacteria. Matrix assisted LDI-MS has shown a great power for macromolecules, but its analytical capability to low mass compounds is limited due to inherent drawbacks, including abundant interference in low mass range (800 Da) caused by matrix self-dissociation and poor reproducibility due to inhomogeneous crystallization. Several matrix-free methods have been developed to solve these issues, mainly through altering organic matrix with inorganic nanostructured surfaces or nanomaterials as LDI medium. In the past five years, improvements on conventional silicon-based, metal-based, metal oxide-based and carbon-based LDI media as well as emerging novel materials such as 2D nanomaterials and organic frameworks have gained important progresses. Meanwhile, with the deep research in light-matter interaction, LDI mechanism studies begin to grow and become to attach great importance. Advances in both medium and mechanism promote to expand the applicable potential of nanostructure/nanomaterial-assisted LDI-MS in many aspects, including trace analysis, structural analysis and MS imaging. In this review, we survey the major progresses in this area in recent years. We also sketch remaining challenges and directions for future development.

Although protein therapeutics is of significance in therapeutic intervention of cancers, controlled delivery of therapeutic proteins still faces substantial challenges including susceptibility to degradation and denaturation and poor membrane permeability. Herein, we report a sialic acid (SA)-imprinted biodegradable silica nanoparticles (BS-NPs)-based protein delivery strategy for targeted cancer therapy. Cytotoxic ribonuclease A (RNase A) was effectively caged in the matrix of disulfide-hybridized silica NPs (encapsulation efficiency of ∼64%), which were further functionalized with cancer targeting capability via surface imprinting with SA as imprinting template. Such nanovectors could not only maintain high stability in physiological conditions but also permit redox-triggered biodegradation for both concomitant release of the loaded therapeutic cargo andiin vivo/iclearance.iIn vitro/iexperiments confirmed that the SA-imprinted RNase A@BS-NPs could selectively target SA-overexpressed tumor cells, promote cells uptake, and subsequently be cleaved by intracellular glutathione (GSH), resulting in rapid release kinetics and enhanced cell cytotoxicity.iIn vivo/iexperiments further confirmed that the SA-imprinted RNase A@BS-NPs had specific tumor-targeting ability and high therapeutic efficacy of RNase A in xenograft tumor model. Due to the specific targeting and traceless GSH-stimulated intracellular protein release, the SA-imprinted BS-NPs provided a promising platform for the delivery of biomacromolecules in cancer therapy.

The glycosylation pattern of alpha fetoprotein (AFP) paves the basis for precise early diagnosis of hepatocellular carcinoma (HCC). However, existing analytical methods ignore the contribution of terminal sialic acid, which has been reported to be highly connected with HCC. Besides, the development of diagnostic assays is severely hindered by the preparation of anti-glycans antibodies. Molecularly imprinted polymers (MIPs), as synthetic antibody mimics, provide unique strengths to address these issues. Herein, we report a MIPs-based dual-modal ratiometric immunoassay for precise HCC diagnosis. Using a "pit one against ten" MIP to recognize a subset of glycans containing sialic acid and/or core fucose, we demonstrated our assay exhibited improved precision as compared with ELISA. This assay provided not only a glycoform-resolved method for precise HCC diagnosis, but also a new paradigm for developing antibody mimics via molecular imprinting towards challenging biomedical applications.

The purpose of this study was to investigate the influences of drying methods on the risperidone (RIS) release profiles of RIS-loaded PLGA microspheres. These microspheres were fabricated with an O/W emulsion solvent evaporation method. The wet microspheres were dried with freeze drying and vacuum drying methods. The microspheres were mono-dispersed spheres with an average diameter of 100 μm. Studies found that drying methods had great influence on the porosity, morphology, and release profiles of RIS-loaded PLGA microspheres. Specifically, the freeze-dried microspheres had higher porosity (78.46 ± 1.64%) than those vacuum-dried ones (52.45 ± 2.68%), and they showed higher RIS release rates (p

The purpose of this study was to fabricate a novel binary hydrogel, and the insulin-loaded hydrogel was used as rectal suppository to prevent type I diabetes. The binary hydrogel was synthesized via solution polymerization. Its structure was studied by Fourier transform infrared spectroscopy (FTIR) and Raman spectra. The swelling behaviors of binary hydrogels were revealed in pH 1.2, 6.8 and 7.4 buffers, respectively. Their inner morphologies were observed with a scanning electron microscope (SEM). Insulin (INS) was selected as a model drug and encapsulated into the binary hydrogels. INS release study was carried out in pH 7.4 buffer. The hypoglycemic effects of INS-loaded hydrogels were studied by rectal administration. FTIR and Raman spectra confirmed the obtaining of binary hydrogels. The hydrogel showed a high swelling ratio in pH 7.4 (rectum environment). SEM photographs illustrated that many micro-pores in the inner of binary hydrogels, which could accommodate abundant guest molecule (e.g. INS). INS release profile suggested that INS-loaded hydrogels could diffuse INS at a sustained manner. Animal studies proved that INS-loaded binary hydrogel had an obvious hypoglycemic effect. Therefore, it could be speculated that the binary hydrogel had a potential application on treating type I diabetes by rectal administration.

In this study, we first obtained the complete mitochondrial genome of Aparapoamon similium (Decapoda: Brachyura). The complete mitochondrial genome is 19,236 bp in length and includes 37 typical genes (13 protein-coding genes, 22 tRNAs genes, 2 rRNAs genes, and 1 putative control region). The whole mitochondrial genome is characterized by the apparent AT bias (72.82%). BI and ML phylogenetic analysis based on 67 mitochondrial genomes of Brachyura species show a highly similar topology structure with high bootstrap supported. The results reveal the close relationship between A. similium and Potamiscus motuoense. This study would establish a solid data foundation for further diversification studies.

The vanadium oxide V2O5•4VO2 cathode material has aroused significant interest due to its high theoretical capacity and wide availability. However, the poor rate and cycle performance of the V2O5•4VO2 electrode severely hindered its further application in high-energy density lithium-ion batteries. Herein, a kind of Al/Mn co-doped V2O5•4VO2 prepared via facile solvothermal method combined with annealing process was reported. Theoretical and experimental results reveal that [AlO6] and [MnO6] not only serve as an octahedral pillar to extend the interlayer spacing, but introduce oxygen vacancies that provide more lithium ion active sites and higher ionic and electronic conductivity in lithium ion (de)intercalation process. Paired with lithium metal anode, Al/Mn co-doped V2O5•4VO2 cathode exhibits better performance metrics of 322.5 mAh/g at 0.1 A/g, 91.7% capacity retention after 50 cycles, and 195.8 mAh/g after 200 cycles at a current density of 1 A/g, while the values corresponding to the pure phase V2O5•4VO2 are 248.7 mAh/g, 66.9% as well as 97.7 mAh/g respectively. Actually, the insight into the performance of potential electrode materials improved by double ion doping was provided in the present work.

Environmental pollution caused by sulfide compounds has become a major problem for public health. Hence, accurate detection of sulfide anions (S2−) level is valuable and vital for environmental monitoring and protection. Here, we report a new colorimetric/fluorescent dual-mode sensor for the determination of S2− based on the inhibition of enzyme activity and the unique optical properties of produced 2,3-diaminophenazine (DAP), thus making the analytical results more convincing. In this strategy, horseradish peroxidase (HRP) enzyme is used for catalyzing the H2O2-mediated oxidation of o-phenylenediamine (OPD) to produce DAP, and the color changed to bright yellow and produced orange yellow fluorescence. But the presence of S2− could cause the deactivation of HRP, which decreased the amount of DAP and consequently resulted in a substantial SPR band fading and an evident fluorescence quenching simultaneously. The mechanism of S2− sensor was examined by combining the UV–vis absorption spectra, fluorescence spectra and electrospray ionization mass spectrometry analysis. Under optimal conditions, the colorimetric and fluorescent linear responses of the proposed method exhibited a wide linear range from 2.5 nM–7.5 μM with ultralow detection limits of 1.2 nM and 0.9 nM, respectively. Some potential interferents (such as F−, Cl−, Br−, I−, SO42−, SO32−, SCN−, H2PO4−, HPO42−, Ac−, NO3−, CO32−) in real samples showed no interference. Moreover, the proposed method offered advantages of simple, low-cost instruments and rapid assay without the utilization of nanomaterials and has been successfully applied to determine S2− content in lake water samples with satisfying recoveries over 97.6%. More importantly, the present S2− sensor not only afforded a new optical sensing pattern for bioanalysis and environment monitoring, but also extends the application field of HRP-catalyzed OPD–H2O2 system.

Bioceramic particulates capable of filling bone defects have gained considerable interest over the last decade. Herein, dual-shell bioceramic microspheres (CaP@CaSi@CaP, CaSi@CaP@CaSi) with adjustable beta-tricalcium phosphate (CaP) and beta-calcium silicate (CaSi) distribution were fabricated using a co-concentric capillary system enabling bone repair via a tailorable biodegradation process. The in vitro results showed the optimal concentration (1/16 of 200 mg/ml) of extracts of dual-shell microspheres could promote bone marrow mesenchymal cell (BMSC) proliferation and enhance the level of ALP activity and Alizarin Red staining. The in vivo bone repair and microsphere biodegradation in calvarial bone defects were compared using micro-computed tomography and histological evaluations. The results indicated the pure CaP microspheres were minimally resorbed at 18 weeks post-operatively and new bone tissue was limited; however, the dual-shell microspheres were appreciably biodegraded with time in accordance with the priority from CaSi to CaP in specific layers. The CaSi@CaP@CaSi group showed a significantly higher ability to promote bone regeneration than the CaP@CaSi@CaP group. This study indicates that the biphasic microspheres with adjustable composition distribution are promising for tailoring material degradation and bone regeneration rate, and such versatile design strategy is thought to fabricate various advanced biomaterials with tailorable biological performances for bone reconstruction.

A novel injectable and high-solid-content drug-loaded supramolecular hydrogel (PTX-mPECT NP/α-CDgel) was prepared by self-assembly of inclusion complexes based on PTX-loaded mPECT (methoxy poly(ethylene glycol)-b-poly(e-caprolactone-co-1,4,8-trioxa[4.6]spiro-9-un-decanone)) nanoparticles (PTX-mPECT NPs) and α-cyclodextrin (α-CD). Paclitaxel (PTX) was chosen as a hydrophobic drug encapsulated into mPECT NPs. Then, gelation occurred when the aqueous solution of α-CD was added to the PTX-mPECT NPs aqueous dispersion within several seconds after stirring. Importantly, with the erosion of the hydrogel, PTX-loaded NPs could be released again and then PTX released further. Rheological studies showed that PTX-mPECT NP/α-CDgel with good injectability underwent a shear-induced sol-gel transition. The results of in vitro drug-release studies demonstrated a sustained-release profile, and the cumulative release of PTX was ≈35% after 20 days. The results of cell-uptake studies and in vitro cytotoxicity studies indicated that the PTX-loaded NPs have been efficiently delivered to cells and killed tumor cells. Higher suppression of tumor growth demonstrated the remarkable anticancer effect of PTX-mPECT NP/α-CDgel upon peritumoral injection. These results showed that high-solid-content PTX-mPECT NP/α-CDgel based on in situ systems could be a promising candidate for local and sustained drug delivery.

Intraperitoneal (IP) chemotherapy is a preferable treatment option for peritoneal carcinomatosis of malignancies by delivering chemotherapeutic drugs into the abdominal cavity. A persistent major challenge in IP chemotherapy is the need to provide effective drug concentration in the peritoneal cavity for an extended period of time. In the present work, the thermosensitive hydrogel system (PTX/PECT(gel)) assembled by PTX (paclitaxel)-loaded amphiphilic copolymer (PECT, poly (ε-caprolactone-co-1,4,8-trioxa [4.6]spiro-9-undecanone)-poly(ethylene glycol)-poly (ε-caprolactone-co-1,4,8-trioxa [4.6]spiro-9-undecanone)) nanoparticles was developed for sustained IP chemotherapy of peritoneal carcinomatosis model. Cytotoxicity assay indicated that PECT hydrogel was biocompatible with very low cytotoxicity and PTX/PECT(gel) had enhanced cytotoxicity than free PTX. In vivo toxicity study demonstrated the biocompatibility and biosafety of PECT hydrogel as an IP chemotherapy carrier. The fluorescence imaging method was employed to monitor the intraperitoneal degradation of PECT hydrogel by labeling PECT with rhodamine B. PECT hydrogel with the dose of 200μL showed about 8days' retention time and most of the injected hydrogel was located in the intestine. The anti-tumor efficacy study was carried out in mice bearing CT26 intraperitoneal ascites fluid as colorectal peritoneal carcinomatosis model. The result showed that intraperitoneal administration of PTX/PECT(gel) could effectively suppress growth and metastasis of CT26 peritoneal carcinomatosis in vivo, compared with Taxol® group. The pharmacokinetic studies demonstrated that PTX/PECT(gel) could improve the bioavailability of PTX by being formulated in PECT hydrogel. Overall, sustained drug concentration at peritoneal levels in combination with drug in the form of nanoparticle contributes to the enhanced anti-tumor efficacy. Thus, our results suggested that PTX/PECT(gel) may have great potential applications in IP chemotherapy.

Injectable and biodegradable supramolecular hydrogel mPECT NP/α-CD(gel) composed of high-concentration nanoparticle dispersion (≤20% W/V) and α-cyclodextrins (α-CD) are prepared by a two-level physical cross-linking using amphiphilic block polymer methoxy poly(ethylene glycol)-b-poly(ε-caprolactone-co-1,4,8-trioxa[4.6]spiro-9-undecanone) (mPECT) and α-CD. The gelation behavior depends on the concentration of nanoparticles and α-CD. The viscoelasticity and shear thinning of mPECT NP/α-CD(gel) are confirmed. In vitro hydrogel erosion is demonstrated to be mainly a concentration-dependent dissociation process with general release of discrete mPECT nanoparticles about 50 nm that can be easily taken up by cells. The in vitro release behavior can be modulated by changing the concentration of nanoparticles or α-CD. In vitro and in vivo cytotoxicity study demonstrates its biocompatibility and biosafety. Gel formation after subcutaneous injection is also confirmed and mPECT NP/α-CD(gel) shows about 2 weeks retention time. This work validates the potential application for this supramolecular hydrogel in local and sustained delivery of nanoparticles.

In this study, the copolymer of methoxy poly(ethylene glycol) methacrylate-co-poly(methylacrylic acid) [poly(mPEGMA-co-MAA)] was synthesized via radical polymerization. Based on this copolymer, novel chitosan-modified poly(mPEGMA-co-MAA) nanoparticles (CS/NPs) were developed to improve the bio-availability of ibuprofen (IBU). Fourier transform infrared spectroscopy (FTIR) and 1H nuclear magnetic resonance (1H NMR) spectra were used to confirm the synthesis of the copolymers. The morphology of CS/NPs was investigated with transmission electron microscopy (TEM). Thermogravimetric analysis (TGA) was used to reveal the thermodynamic properties of the CS/NPs. The cytotoxicity of CS/NPs was assessed by the cell viability of 293T cells. FTIR and 1H NMR spectra confirmed the synthesis of the novel copolymer. TEM photographs showed that the CS/NPs had a core-shell structure. High cell viability indicated that the CS/NPs were nontoxic. The in vitro release profiles suggested that the CS/NPs released IBU in pH 7.4 buffer in a continuous manner. Furthermore, the IBU-CS/NPs showed a long antifebrile effect. Animal experiments showed that the IBU-CS/NPs had obvious antifebrile effects. Therefore, CS/NPs could reduce the dosing frequency of IBU, and improve its bio-availability.

With increasingly rigorous requirements for biomaterials, the design and fabrication of novel materials with smart functions are urgently needed. The fabrication of composite materials that can surmount individual shortcomings as well as bring synergistic benefits represents an efficient route to improve the performances and expand application scopes of biomaterials. Due to their unique structures and properties, electrospun-fibers and hydrogels have been widely applied in many biological and biomedical fields. Based on this, more and more attentions have been paid on the composites of electrospun-fibers and hydrogels as biomaterials, aiming to bring their individual superiority into full play as well as remedy their intrinsic defects. This review summarizes approaches used to integrate electrospun-fibers and hydrogels into various structures and the development of their composites as a potential solution to some current challenges in drug delivery, tissue engineering and some other bio-related aspects. The individual roles and mutual synergy of electrospun-fibers and hydrogels in the composites will be emphasized.

The application of PEG-b-PCL micelles was dampened by their inherent low drug-loading capability and relatively poor cell uptake efficiency. In this study, a series of novel PEG-b-PCL copolymers methoxy poly(ethylene glycol)-b-poly(ε-caprolactone-co-γ-dimethyl maleamidic acid -ε-caprolactone) (mPEG-b-P(CL-co-DCL)) bearing different amounts of acid-labile β-carboxylic amides on the polyester moiety were synthesized. The chain structure and chemical composition of copolymers were characterized by (1)H NMR, Fourier transform infrared spectroscopy (FT-IR), and gel permeation chromatography (GPC). mPEG-b-P(CL-co-DCL) with critical micellar concentrations (CMCs) of 3.2-6.3 μg/mL could self-assemble into stable micelles in water with diameters of 100 to 150 nm. Doxorubicin (DOX), a cationic hydrophobic drug, was successfully encapsulated into the polymer micelles, achieving a very high loading content due to electrostatic interaction. Then the stability, charge-conversional behavior, loading and release profiles, cellular uptake and in vitro cytotoxicity of free drug and drug-loaded micelles were evaluated. The β-carboxylic amides functionalized polymer micelles are negatively charged and stable in neutral solution but quickly become positively charged at pH 6.0, due to the hydrolysis of β-carboxylic amides in acidic conditions. The pH-triggered negative-to-positive charge reversal not only resulted in a very fast drug release in acidic conditions, but also effectively enhanced the cellular uptake by electrostatic absorptive endocytosis. The MTT assay demonstrated that mPEG-b-P(CL-co-DCL) micelles were biocompatible to HepG2 cells while DOX-loaded micelles showed significant cytotoxicity. In sum, the introduction of acid-labile β-carboxylic amides on the polyester block in mPEG-b-P(CL-co-DCL) exhibited great potentials for the modifications in the stability in blood circulation, drug solubilization, and release properties, as well as cell internalization and intracellular drug release.

Cookies spoofing is a kind of web-based attack method commonly used by hackers. In this paper, the purpose and working process of Cookies cheating are expatiated. Then, the principle of Cookies cheating, the methods of harms and stealing are analyzed. Then, a simple message to the system to cheat the integrity of the process, and finally gives a broad sense from the Cookies to deceive the script system strategy.

The improvement of the solid content of the hydrophobic drugs (such as paclitaxel (PTX), etc.) loaded nanoparticles (NPs) dispersion is important for enhancing drug-loaded efficiency and reducing the cost in production and application. A diblock copolymer methoxy poly(ethylene glycol)-b-poly(ε-caprolactone-co-1,4,8-trioxa[4.6]spiro-9-undecanone) (mPECT) is synthesized via the ring-opening polymerization of ε-caprolactone and 1,4,8-trioxa[4.6]spiro-9-undecanone (TOSUO) with methoxy poly(ethyleneglycol) (mPEG） as the initiator. The chemical structures and thermal properties of mPECT are characterized by (1)HNMR, Fourier transform infrared (FT-IR), gel permeation chromatography, differential scanning calorimetry, etc. PEG45.45-b-P(C28.33-co-T5.38) (mPECT-2) is able to self-assemble into stable NPs in water via nanoprecipitation method at a high solid content (≤25 wt%) and their freeze-dried powders can well re-disperse in water. The paclitaxel (PTX) is chosen as a hydrophobic drug model and successfully encapsulate into the mPECT-2 NPs via the same method at a high solid content. The encapsulation efficiency, cytotoxicity and in vitro release of PTX-loaded NPs are investigated. The results suggest that the behavior of the drug-loaded mPECT-2 NPs prepared at a solid content of 25 wt% is similar to that of NPs prepared at a solid content of 1 wt%, which indicate that increasing solid content of polymer has no negative effect on the properties of NPs dispersion in application. In summary, the freeze-dried NPs prepared from the high solid content dispersion (≤25 wt%) has a good redispersibility and exhibits great potential in cost control of preparing NPs dispersion used as drug delivery system.

Embelin, an active ingredient of traditional herbal medicine, is used to treat many diseases such as cancer. However, embelin is hydrophobic and insoluble in water, which makes it unsuitable for in vivo applications. In this study, we constructed an embelin-loaded thermosensitive injectable hydrogel system that we named Embelin/PECT(gel) based on the amphiphilic triblock copolymer of poly (ε-caprolactone-co-1,4,8-trioxa[4.6]spiro-9-undecanone)-poly (ethylene glycol)-poly (ε-caprolactone-co-1,4,8-trioxa[4.6]spiro-9-undecanone) (PECT). The cytotoxicity and the antitumor effects of Embelin/PECT(gel) on mouse hepatic cancers were investigated in vitro and in vivo. Results indicated that embelin was formulated in PECT hydrogel and could be continuously released from Embelin/PECT(gel) , showing a higher cytotoxicity for H22 cells in vitro compared with free embelin. The aqueous solution of Embelin/PECT(gel) transformed into gel at the injection site within seconds, which later eroded and degraded over time in vivo. A single local peritumoral injection of Embelin/PECT(gel) in liver at a low dosage of 0.5 mg per mouse exhibited a significant antitumor effect, which was comparable to the antitumor effect of the embelin solution treatment at a total dose of 6 mg per mouse in mouse hepatic cancer. Embelin/PECT(gel) , as a drug delivery system in liver, represents a novel therapeutic drug candidate for the clinical treatment of advanced hepatocellular carcinoma.

For in situ thermosensitive hydrogels, it is a big challenge to achieve high drug loading, long-term local retention, and effective drug release simultaneously. To address these issues, we combined the strategy of drug nanocrystals (NCs) and thermosensitive hydrogels with higher gel strength. In particular, we developed paclitaxel NC-based hydrogels using PECT, a thermosensitive polymer synthesized by us (PTX-NC-PECT), and a nanoparticle-based system was used as the control (PTX-NP-PECT). First, high levels of PTX could be loaded in both PECT hydrogels. Moreover, in vivo near infrared fluorescence (NIRF) imaging showed that both hydrogel systems were able to maintain the payloads of 1,1-dioctadecyltetramethyl indotricarbocyanine iodide (DiR) at a peri-tumoural site for at least 21 days, much longer than that achieved with the control hydrogel of Pluronic® F127. Furthermore, we observed that PTX-NCs released free PTX more effectively and homogeneously than PTX-NPs in vitro. It was further verified in vivo that the release of DiR from DiR-NC-PECT was more complete than that from DiR-NP-PECT. Finally, PTX-NC-PECT gel demonstrated the strongest anti-tumour efficacy on MCF-7 breast cancer. In conclusion, PTX-NC-PECT hydrogel might be a high-performance thermosensitive hydrogel for local cancer therapy.

Nanoparticle (NP)-assisted drug delivery systems with disassemblable behaviors in response to intracellular microenvironment are urgently demanded in systemic cancer chemotherapy for enhanced intracellular drug release. Curcumin (CUR), an effective and safe anticancer agent, was limited by its water insolubility and poor bioavailability. Herein, pH and reduction dual-induced disassemblable NPs for high loading efficiency and improved intracellular release of CUR were developed based on an acid degradable cyclic benzylidene acetal groups (CBAs)-functionalized poly(2,4,6-trimethoxybenzylidene-1,1,1-tris(hydroxymethyl)ethane methacrylate)-g-SS-poly(ethylene glycol) (PTTMA-g-SS-PEG) graft copolymer, which was readily prepared via RAFT copolymerization and coupling reaction. The NPs self-assembled from PTTMA-g-SS-PEG copolymers were stable at physiological pH, and quickly disassembled in mildly acidic and reductive environments because of the hydrolysis of CBAs in hydrophobic PTTMA core and the cleavage of disulfide-linked detachable PEG shell. PTTMA-g-SS-PEG NPs exhibited excellent CUR loading capacity with drug loading content up to 19.2% and entrapment efficiency of 96.0%. Within 20 h in vitro, less than 15.0% of CUR was released from the CUR-loaded NPs in normal physiological conditions, whereas 94.3% was released in the presence of reductive agent and mildly acidic conditions analogous to the microenvironment in endosome/lysosome and cytoplasm. Confocal fluorescence microscopies revealed that the CUR-loaded PTTMA-g-SS-PEG NPs exhibited more efficiently intracellular CUR release for EC-109 cells than that of CUR-loaded reduction-unresponsive PTTMA-g-PEG NPs and free CUR. In vitro cytotoxicity studies displayed blank PTTMA-g-SS-PEG NPs showed low toxicity at concentrations up to 1.0 mg/mL, whereas CUR-loaded PTTMA-g-SS-PEG NPs demonstrated more efficient growth inhibition toward EC-109 and HepG-2 cells than reduction-unresponsive controls and free CUR. Therefore, the above results indicated that pH and reduction dual-induced disassemblable PTTMA-g-SS-PEG NPs may have emerged as superior nanocarriers for active loading and promoted intracellular drug delivery in systemic cancer chemotherapy.

Injectable thermosensitive hydrogels provide local non-invasive platforms for sustained drug release,tissue engineering and cellular immunity. As a long-term implant, the toxicity and in vivo biological effect should be concerned.Previously we developed a novel type of injectable nanoparticular self-supported hydrogel (PECT NPs(Gel))of PEG and pendent cycle ethers modified poly(ε-caprolactone) triblock copolymer (PECT), which could sustainedly release PECT or drug-loaded PECT nanoparticles with the hydrogel disassembly and provided efficient antitumor activity and significant decrease of side effects. Herein, the aim of this work was to reveal the toxicity and in vivo biological effect of PECT nanoparticles and PECT NPs(Gel). In vitro cytotoxicity indicated no cell cytotoxicity was observed when the concentration of PECT nanoparticle was up to 500 µg/mL, and also nomutagenic effect and no genotoxicity were observed.In vivo intravenous injection of PECT nanoparticles demonstrated that the LD50 was approximate high to 2.564 g/kg, and compared with the control mice, the mice treated with daily administration of PECT nanoparticles showed no difference in the physical or behavioral alterations, body weight changes, biochemical and hematological parameters as well as organ coefficients. The in vivo chronic effect of PECT NPs(Gel)confirmed no toxic lesions to animals in a whole period of three months even the dosage was high to 20 g/kg. These findings indicated PECT nanoparticles and PECT NPs(Gel) were of well biocompatibility and did not provoke any side effect to body, which represented a new class of injectable and non-invasive systemic or site-specific delivery carrier.

Combination delivery systems composed of injectable hydrogels and drug-incorporated micelles or nanoparticles with tunable and convenient properties for clinical operation and storage are urgently demanded in regional cancer chemotherapy to prolong and control drug release, enhance antitumor efficiency and decrease side effects. Previously, we developed a novel thermosensitive amphiphilic triblock copolymer, poly(e-caprolactone-co-1,4,8-trioxa[4.6]spiro-9-undecanone)–poly(ethylene glycol)–poly(e-caprolactone-co-1,4,8-trioxa[4.6]spiro-9-undecanone) (PECT), and fabricated a reconstituted “two into one” combination system of thermosensitive injectable hydrogel PTX/PECTGel, assembled from paclitaxel (PTX)-loaded PECT nanoparticles (NPs). PTX/PECTGel could be stored as freeze-dried powders of paclitaxel-loaded PECT NPs, which could be reconstituted into aqueous fluid dispersions at ambient temperature just by mixing with water after gentle stirring for several minutes, and form a hydrogel at the injected site in vivo. Herein, the drug release, in vivo morphology, antitumor efficiency and pharmacokinetic properties of PTX/PECTGel were evaluated. The PTX/PECTGel combination system could continuously release PTX in a near linear manner over 42 days in vitro, and simultaneously, PTX/PECT NPs containing 75% of the total released PTX could dissociate from the PTX/PECTGel. PTX/PECTGel exhibited remarkable in vitro anti-proliferative activities against Ehrlich ascites carcinoma (EAC) cancer cells. The peritumorally or intratumorally injected PECT gel could cover the entire surface or fill up the interior space of the tumor, respectively. A single peritumoral injection of the PTX/PECTGel formulation at a low dosage of 10 mg kg−1 could completely inhibit the growth of an EAC tumor inoculated in Balb/c mice after the first week, and the inhibition could be sustained for more than 21 days. The plasma pharmacokinetic study demonstrated that PTX/PECTGel could greatly decrease the systemic exposure of PTX, as confirmed by the rather low plasma concentration. On the other hand, the PTX concentration in normal tissues with the intratumoral injection of PTX/PECTGel was approximately 2 μg g−1, which was 3–10 times lower than that with the intraperitoneal or intratumoral injection of Taxol®, implying fewer off-target side effects. These data confirmed that the PTX/PECTGel combination local delivery system could vastly prolong the in vitro and in vivo paclitaxel release, enhance the local tumor inhibition effect and lower the systemic exposure and tissue distribution of paclitaxel. Hence, the “two into one” PTX/PECTGel system holds underlying value for regional cancer chemotherapy.