Search

In this study, we have observed dynamic switching behaviors in a memristive device. There are only a few atoms in the resistive switching reaction which enables the high-speed resistive switching characteristics, which was analyzed dynamically by real-time analyzing tools. From fundamental conductance considerations, the resistance of the conductive path in HfOx memristor is found to be due to barriers which are atomically incremented during the RESET process. Simultaneously, we have demonstrated the quantized switching phenomena at ultra-cryogenic temperature (4 K), which are attributed to the atomic-level reaction in metallic filament. [ABSTRACT FROM AUTHOR]

The switching layer with Si interfusion is investigated to improve the electrical characteristics of WOX resistance random access memory (RRAM). The WOX has attracted extensive attention for RRAM because it can form by converting the surface of the W-plug with a current complementary metal oxide semiconductor (CMOS) compatible thermal oxidation process. In general, the resistance switching behavior of WOX-RRAM devices is unstable because the diverse oxidation state provided the stochastic conduction paths. In this research, the Si interfusion can effectively localize the filament conduction path in WOX resistance switching layer because the tungsten filament path is limited by SiOX in the WSiOX film during the forming process. [ABSTRACT FROM AUTHOR]

Abstract: In this research, paraffin wax is employed as the passivation layer of the bottom gate amorphous indium–gallium–zinc oxide thin-film transistors (a-IGZO TFTs), and it is formed by sol–gel process in the atmosphere. The high yield and low cost passivation layer of sol–gel process technology has attracted much attention for current flat-panel-display manufacturing. Comparing with passivation-free a-IGZO TFTs, passivated devices exhibit a superior stability against positive gate bias stress in different ambient gas, demonstrating that paraffin wax shows gas-resisting characteristics for a-IGZO TFTs application. Furthermore, light-induced stretch-out phenomenon for paraffin wax passivated device is suppressed. This superior stability of the passivated device was attributed to the reduced total density of states (DOS) including the interfacial and semiconductor bulk trap densities. [Copyright &y& Elsevier]

In this paper, multi-layer Zn:SiO2/SiO2 structure is introduced to reduce the operation power consumption of resistive random access memory (RRAM) device by modifying the filament formation process. And the configuration of multi-layer Zn:SiO2/SiO2 structure is confirmed and demonstrated by auger electron spectrum. Material analysis together with conduction current fitting is applied to qualitatively evaluate the carrier conduction mechanism on both low resistance state and high resistance state. Finally, single layer and multilayer conduction models are proposed, respectively, to clarify the corresponding conduction characteristics of two types of RRAM devices. [ABSTRACT FROM AUTHOR]

Bipolar switching properties and electrical conduction mechanism in Sn:SiO thin-film RRAM devices were investigated and discussed. To complete the resistive switching properties of the stannum doped into silicon oxide thin films, the RTA-treated Sn:SiO thin-film RRAM devices were investigated and discussed. In addition, the improvement qualities and electrical switching properties of the RTA-treated Sn:SiO thin-film RRAM devices were carried out XPS, FT-IR, and IV measurement. The ohmic conduction with metal-like behavior and hopping conduction dependent activation energy properties by the Arrhenius plot equation in LRS of the Sn:SiO thin films was investigated. The activation energy and hopping distance for the RTA-treated thin films were found to be 0.018 eV and 1.1 nm, respectively. For the compatibility with the IC processes, the RTA treatment was a promising method for the Sn:SiO thin-film RRAM nonvolatile memory applications. [ABSTRACT FROM AUTHOR]

The instability of the gate bias and drain bias stresses is observed at high temperature in amorphous InGaZnO thin-film transistors (a-IGZO TFTs). The transfer characteristics of a-IGZO TFTs at different temperatures are also investigated in this paper. The transfer curve exhibits an apparent subthreshold current stretchout phenomenon at high temperature. The stretchout phenomenon becomes more serious with the increase of the temperature. In addition, thermally induced holes are accumulated by the negative gate voltage and get trapped in the gate dielectric or at the dielectric/channel interface at high temperature. The negative threshold voltage shifts with stress time and this is because the trapped holes induce more electrons. For drain bias stress at high temperature, the transfer curve exhibits an apparent shift during drain bias stress at high temperature compared with the same at room temperature. At high temperature, thermally induced holes are trapped in the gate insulator, especially near the drain region. Capacitance-voltage measurements have been used to prove the nonuniform hole-trapping phenomenon. Furthermore, the simulation of the capacitance-voltage and current-voltage curves also have been applied to confirm the hole-trapping distribution. The obtained results clarify that the instability is caused by nonuniform hole-trapping phenomenon. [ABSTRACT FROM AUTHOR]

Highlights: [•] The supercritical fluid treatment can efficiently reduce the operation current of resistance random access memory. [•] The dangling bonds of Sn:SiO x thin film were cross linking by the hydration–dehydration reaction by supercritical fluid treatment. [•] The current conduction mechanism of low resistance state in post-treated RRAM device was dominated by hopping conduction. [•] The current conduction mechanism of high resistance state in post-treated RRAM device was dominated by Schottky emission. [ABSTRACT FROM AUTHOR]

Abstract: N2O plasma treatment suppressed the temperature-dependent sub-threshold leakage current of amorphous indium–gallium–zinc-oxide thin film transistors (a-IGZO TFTs). For untreated devices, the transfer curve exhibited abnormal electrical properties at high temperature. The abnormal electrical properties are explained by the energy band diagrams for both forward and reverse sweep. Above 400K, holes can be generated from trap-assisted transition, and drift to the source side which induces source barrier lowering. The source side barrier lowering enhances electron injection from the source to channel and causes an apparent sub-threshold leakage current. This phenomenon, which is experimentally verified, only appears in the device without N2O plasma treatment, but not in the device with N2O plasma treatment. The results suggested that the density of states for a-IGZO with N2O plasma treatment is much lower than that without plasma treatment. [Copyright &y& Elsevier]

A bilayer resistive switching memory device with an inserted porous silicon oxide layer is investigated in this letter. Compared with single Zr:SiOx layer structure, Zr:SiOx/porous SiOx structure outperforms from various aspects, including low operating voltages, tighter distributions of set voltage, higher stability of both low resistance state and high resistance state, and satisfactory endurance characteristics. Electric field simulation by comsolTM Multiphysics is applied, which corroborates that intensive electric field around the pore in porous SiOx layer guides the conduction of electrons. The constraint of conduction path leads to better stabilization and prominent performance of bilayer resistive switching devices. [ABSTRACT FROM AUTHOR]

The tin-doped can supply conduction path to induce resistance switching behavior. However, the defect of tin-doped silicon oxide (Sn:SiOx) increased the extra leakage path lead to power consumption and joule heating degradation. In the study, supercritical CO2 fluids treatment was used to improve resistive switching property. The current conduction of high resistant state in post-treated Sn:SiOx film was transferred to Schottky emission from Frenkel-Poole due to the passivation effect. The molecular reaction model is proposed that the defect was passivated through dehydroxyl effect of supercritical fluid technology, verified by material analyses of x-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. [ABSTRACT FROM AUTHOR]

In the study, we reduced the operation current of resistance random access memory (RRAM) by supercritical CO2 (SCCO2) fluids treatment. The power consumption and joule heating degradation of RRAM device can be improved greatly by SCCO2 treatment. The defect of nickel-doped silicon oxide (Ni:SiOx) was passivated effectively by the supercritical fluid technology. The current conduction of high resistant state in post-treated Ni:SiOx film was transferred to Schottky emission from Frenkel-Pool due to the passivation effect. Additionally, we can demonstrate the passivation mechanism of SCCO2 for Ni:SiOx by material analyses of x-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. [ABSTRACT FROM AUTHOR]

Abstract: This study investigates the temperature-dependent memory characteristics of polycrystalline silicon thin-film transistors with oxide/nitride/oxide stack gate dielectrics and N+ poly-Si gate structures for nonvolatile memory application. As the device was programmed by Fowler–Nordheim tunneling at high temperature, some electrons captured in shallow traps could obtain enough thermal energy to de-trap to the gate, resulting in low programming efficiency. As the programming time increases, the hole injection through the blocking oxide from the gate would further lead the threshold voltage to decrease. In addition, the retention characteristic of the device programmed at higher temperature exhibits better charge storage ability. Because the electrons trapped in the shallow traps of the nitride layer can be easily de-trapped when temperature rises, the memory characteristics are mainly dominated by charges stored in the deep traps. [Copyright &y& Elsevier]

In this study, the electrical conduction mechanism of Zn:SiOx resistance random access memory (RRAM) treated with supercritical CO2 fluid (SCCO2) process was investigated by low temperature measurement. The current of low resistance state for current-voltage curves in SCCO2-treated and untreated Zn:SiOx RRAM were measured and compared under a low temperature range from 100 K to 298 K. The electrical conduction mechanisms of hopping conduction and metal-like behaviors in SCCO2-treated and untreated Zn:SiOx RRAM were discussed, respectively. Finally, the electrical conduction mechanism was analyzed and verified by the chemical composition and bonding intensity of XPS analyses. [ABSTRACT FROM AUTHOR]

This letter investigated the electrical characteristics of resistance random access memory (RRAM) with HfO2/BN bilayer structures. By adopting the high/low permittivity structure, we obtained the excellent device characteristics such as uniform distribution of switching voltage and more stable resistance switching properties of RRAM. The current conduction mechanism of low resistance state in the HfO2/BN device was transferred to space-charge-limited current conduction from Ohmic conduction owing to space electric effect concentrated by the high/low permittivity bilayer structures. The electric field in the bilayer can be verified by comsol simulation software. [ABSTRACT FROM AUTHOR]

An abnormal subthreshold leakage current is observed at high temperature, which causes a notable stretch-out phenomenon in amorphous InGaZnO thin film transistors (a-IGZO TFTs). This is due to trap-induced thermal-generated holes accumulating at the source region, which leads to barrier lowering on the source side and causes an apparent subthreshold leakage current. In order to obtain superior thermal stability performance of a-IGZO TFTs, conducting N2O plasma treatment on active layer was expected to avert defects generation during SiO2 deposition process. Reducing defects generation not only suppresses subthreshold current stretch-out phenomenon but also significantly improves the bias stress stability in a-IGZO TFTs at high temperature. [ABSTRACT FROM AUTHOR]

In this Letter, the characteristics of set process of hafnium oxide based resistance random access memory are investigated by different set processes with increasing compliance current. Through current fitting, carrier conduction mechanism of low resistance state changes from hopping to surface scattering and finally to ohmic conduction with the increase of setting compliance current. Experimental data of current-voltage measurement under successive increasing temperature confirms the conduction mechanism transition. A model of filament growth is eventually proposed in a way by merging discrete metal precipitates and electrical field simulation by comsol Multiphysics further clarifies the properties of filament growth process. [ABSTRACT FROM AUTHOR]

In this study, the hopping conduction distance variation of Zn:SiO2 resistance random access memory (RRAM) devices with different operating compliance currents was discussed and verified. To investigate and determine the hopping conduction distance dependent activation energy characteristics, the Arrhenius plot of low resistance state of Zn:SiO2 RRAM devices was applied, from which we proposed carrier conduction model. With the increase of current compliance, more metal ions would accumulate to form precipitates with larger diameter, which in turn resulted in the shortening of hopping distance. Because of shorter hopping distance, activation energy for carrier hopping would decrease. [ABSTRACT FROM AUTHOR]