Search

In this response, we show that the paper by Kim et al. by our group has a different research purpose and uses different modeling processes, which was not described in the previous work by Ortiz-Conde et al. The comments issued by Ortiz-Conde et al., who claim that our paper corresponds to a particular case of their previous work, are in our opinion overgeneralized. Differences compared to Ortiz-Conde’s previous work are discussed in detail. We also explain how the problem on threshold voltage pointed out by Ortiz-Conde et al. can be solved through a semiempirical method from measured data. [ABSTRACT FROM AUTHOR]

Conventionally, integrated drain-extended MOS (DeMOS) like high-voltage devices are designed while keeping only performance targets for a given application in mind. In this paper, for the first time, performance and reliability codesign approach using 3-D TCAD has been presented for various superjunction (SJ) type DeMOS devices. In this context, how to effectively utilize the SJ concept in a DeMOS device for System on Chip applications, which often has stringent switching and RF performance targets, is explored in detail in this paper. Moreover, design and reliability tradeoffs for switching and RF applications are discussed, while considering two unique sets, one with fixed breakdown voltage and other with fixed ON-resistance. Finally, hot carrier generation, safe operating area concerns, and electrostatic discharge physics are explored and compared using 3-D TCAD simulations. [ABSTRACT FROM PUBLISHER]

A comprehensive study of dielectric modulated (DM) drift regions for power devices is presented in this paper. The performance of this structure is theoretically analyzed and compared with both conventional and superjunction (SJ) structures. In this paper, an analytical model for DM drift regions with cylindrical cells is proposed and compared with linear cells. An optimal tradeoff between breakdown voltage (BV) and specific ON-resistance ( R\scriptscriptstyle ON,sp) is obtained by a methodology developed in this paper. 3-D simulations of DM structures with hexagonal cells approximated by cylindrical cells are conducted to verify the analytical model. Optimal BV– R\scriptscriptstyle ON,sp tradeoffs for devices with conventional and SJ drift regions are also obtained through the same methodology and verified by 3-D simulations. Static characteristics of these three different drift region structures in both Si and SiC power devices are compared. [ABSTRACT FROM AUTHOR]

The dielectric screening property of a semiconductor is very crucial for the electrical characteristics of a MOSFET, and which can be described mathematically by Poisson equation via the permittivity. While the theory and experiments have corroborated the permittivity reduction of nanoscale Si, this paper studies the electrical characteristics of MOSFETs considering the reduced channel permittivity by quantum transport simulations. It is found that the channel permittivity reduction may mitigate the short-channel effects, showing subthreshold swing improvement and threshold voltage shift of MOSFETs in nanoscale. Compared to quantization effects, the positive and negative impacts of the channel permittivity reduction on the devices in particularly nanoscale have been investigated. This paper elucidates the necessity of considering semiconductor permittivity reduction for nanoscale device design and simulations. [ABSTRACT FROM AUTHOR]

The instability of amorphous indium–gallium–zinc oxide (a-IGZO) thin-film transistors (TFTs) under ultraviolet (UV) light was thoroughly investigated in this paper. Unlike in a darkened state, an off-state leakage current can be found in the dual-sweep I–V transfer curve of a-IGZO TFTs under UV light illumination. Furthermore, despite the same UV light condition, the forward sweep and reverse sweep show different I–V curves, representing two different physical mechanisms. First, the subthreshold swing degradation and threshold voltage shift to the negative direction in the forward sweep are due to the total channel barrier lowering and can be confirmed by changing the light exposure region. Second, in the reverse sweep, the suggested back-channel leakage current can be controlled by dual-gate TFTs. UV light exposure of the metal–insulator–semiconductor–metal structure verifies that the off-state leakage current passes through the back channel in a reverse sweep. Finally, the physical mechanism links between forward and reverse sweeps have comprehensive interpretation in this paper. [ABSTRACT FROM AUTHOR]

In this paper, we propose a model for estimating short-channel effects (SCEs) in the shell-doped double-gate junctionless (JL) MOSFET. The main emphasis of this paper is to estimate SCEs by effectively capturing source/drain (S/D) extensions beyond the gate edges for different values of undoped core thickness (${T}_{\textsf {core}}$), shell doping (${N}_{\textsf {d}}$), gate length (${L}_{\textsf {g}}$), and gate (${V}_{\textsf {gs}}$) and drain (${V}_{\textsf {ds}}$) biases in subthreshold regime. The threshold voltage (${V}_{\textsf {th}}$), drain-induced barrier lowering and subthreshold swing (${S}$), extracted from transfer characteristics, are in good agreement with the simulation results. Results highlight the utility of shell doping and core thickness to provide an additional degree of freedom to control SCEs. The proposed model can be useful in estimating SCEs and optimizing core–shell JL architecture for low-power applications. [ABSTRACT FROM AUTHOR]

The minimum specific ON-resistance $\text{R}_{ \mathrm{\scriptscriptstyle ON},\textsf {sp}}$ of the semisuperjunction (semi-SJ) device is realized in this paper. Based on the similar SJ optimization method in our previous works, the minimum $\text{R}_{ \mathrm{\scriptscriptstyle ON},\textsf {sp}}$ of the semi-SJ is searched by optimizing both the semi-SJ and the N-buffer regions. The proposed design formulas give the optimized doping concentration $\text{N}_{\textsf {SJ}}$ of the semi-SJ region, doping concentration $\text{N}_{\textsf {B}}$ , and length $\text{L}_{\textsf {B}}$ of the N-buffer region, respectively. As examples, 1000- and 1500-V semi-SJ devices are designed with the formulas. The calculated results are in a good agreement with the simulations. The comparisons between the simulations and the existing experiments demonstrate that the optimization in this paper realizes lower $\text{R}_{ \mathrm{\scriptscriptstyle ON},\textsf {sp}}$ under the same breakdown voltage $\text{V}_{\textsf {B}}$ even with a shorter SJ length. [ABSTRACT FROM AUTHOR]

In this paper, we study the switching behavior of silicon-on-insulator light-emitting diodes (LEDs). Through the comparison of various device geometries, we establish the dimensional dependence of the switching speed of the LED. TCAD simulations are in line with the experimental results. Our findings indicate that ON–OFF keying up to GHz frequencies should be feasible with such diodes, although a design optimized for higher frequency operation will exhibit a reduced light emission efficiency. [ABSTRACT FROM AUTHOR]

In this paper, the pinning process of pinned photodiodes (PPDs) is described by a new analytical model, assuming the PPD to be composed of inner and junction regions. There are two definitions of the pinning potential: maximum conduction band potential variation ($\Delta \varphi _{M}$) and maximum electron quasi-fermi level potential variation ($\Delta $ FP $_{M}$). The output of the previous pinning potential models is only an approximation of $\Delta \varphi _{M}$. In this paper, a comprehensive model is proposed in which both aforementioned definitions of pinning potential can be achieved analytically. The proposed model is a system of equations relating PPD’s main characteristics such as $\Delta \varphi _{M}$ and equilibrium full-well capacity to other main PPD parameters such as PPD spatial dimensions, impurity dopant concentrations, maximum inner region potential, and remnant carrier population at $\Delta \varphi _{M}$. The proposed model is verified by two previously reported experiment-based data. [ABSTRACT FROM AUTHOR]

Stacks of 2-D materials, known as van der Waals (vdW) heterostructures, have gained vast attention due to their interesting electrical and optoelectronic properties. This paper presents an intuitive circuit model for the out-of-plane electrostatics of a vdW heterostructure composed of an arbitrary number of layers of 2-D semiconductors, graphene, or metal. We explain the mapping between the out-of-plane energy band diagram and the elements of the equivalent circuit. Although the direct solution of the circuit model for an n-layer structure is not possible due to the variable, nonlinear quantum capacitance of each layer, this paper uses the intuition gained from the energy band picture to provide an efficient solution in terms of a single variable. Our method employs Fermi–Dirac statistics while properly modeling the finite density of states (DOS) of 2-D semiconductors and graphene. The approach circumvents difficulties that arise in commercial TCAD tools, such as the proper handling of the 2-D DOS and the simulation boundary conditions when the structure terminates with a nonmetallic material. Based on this methodology, we have developed 2dmatstacks, an open-source tool freely available on nanohub.org. Overall, this paper equips researchers to analyze, understand, and predict experimental results in complicated vdW stacks. [ABSTRACT FROM AUTHOR]

This paper proposes a semianalytical model to estimate short-channel effects for independent gate operation in double-gate (DG) junctionless (JL) MOSFET incorporating gate-to-source/drain underlap, through the solution of Poisson’s equations in the subthreshold regime. The model also accounts for the asymmetry in device operation through variation in gate oxide thicknesses, gate work functions, and underlap lengths. Subthreshold drain current, threshold voltage, and subthreshold swing, evaluated from the channel potential, show reasonable agreement with simulation data. Results suggest the use of negative back gate bias and longer underlap length to reduce off-current. This paper highlights the role of doping, underlap length, and back gate bias in tuning the threshold voltage. This model serves as a generic formulation (within limits) with different asymmetries to estimate, design, and optimize self-aligned DG JL transistors for subthreshold logic applications. [ABSTRACT FROM AUTHOR]

Superjunction has arguably been the most creative and important concept in the power device field since the introduction of the insulated gate bipolar transistor (IGBT) in the 1980s. It is the only concept known today that has challenged and ultimately proved wrong the well-known theoretical study on the limit of silicon in high-voltage devices. This paper deals with the history, device and process development, and the future prospects of Superjunction technologies. It covers fundamental physics, technological challenges as well as aspects of design and modeling of unipolar devices, such as CoolMOS. The superjunction concept is compared to other methods of enhancing the conductivity of power devices (from bipolar to employment of wide-bandgap materials) to derive its set of benefits and limitations. This paper closes with the application of the superjunction concept to other structures or materials, such as terminations, superjunction IGBTs, or silicon carbide Field Effect Transistors (FETs). [ABSTRACT FROM AUTHOR]

Increased drain-induced barrier lowering caused by drain electric flux (or field) passing through the buried-oxide (BOX) layer in silicon-on-insulator (SoI) MOSFETs has been reported as an inherent disadvantage of SoI technology. Part I of this paper discussed derivation of the relationships between coordinates in MOSFETs and potential/stream function in preparation for the modeling of electric flux using conformal mapping in subthreshold regions of ground plane SoI MOSFETs and the validity of the approach was checked via device simulation. Here, in Part II of this paper, we discussed the model’s derivation based on these relationships. The dependences of the flux amount on BOX thickness, BOX permittivity, SoI thickness, and gate length estimated using the model were also discussed in comparison with those estimated via device simulation. [ABSTRACT FROM PUBLISHER]

Detailed physics of the third quadrant electrical characteristics of 1.2-kV rated 4H-SiC accumulation (Acc) and inversion (Inv) channel MOSFETs, based on experimentally measured data and TCAD numerical simulations, are described in this paper for the first time. The power MOSFETs with various channel lengths (0.3, 0.5, 0.8, 1.1 $\mu \text{m}$) used in this paper were fabricated in a 6-in commercial foundry. Numerical simulations verified that there are two current paths in the third quadrant: 1) through the base region and 2) through the p-n body diode. This paper demonstrates that the Acc MOSFETs have a smaller third quadrant knee voltage (${V}_{{\text {knee}}})$ of −1.2 V compared with −1.9 V for the Inv MOSFETs (at ${V}_{g} = {0}$ V and room temperature). Numerical simulations show that this difference is due to a smaller potential barrier for electron transport from the drain to the source in the base region for accumulation channel devices than inversion channel devices. Acc devices are shown to have a lower voltage drop in the third quadrant. [ABSTRACT FROM AUTHOR]

This paper aims to investigate a porous silicon (PS)-based edge termination for planar type ac switch. TRIAC device prototypes, specifically dedicated to evaluate blocking performances, are fabricated by integrating electrochemical etching in device processing. A mixed porous morphology containingmicro-, meso-, and macropores is obtained in a p-Type through-wafer-diffused via after anodization. The fabricated prototypes show PS-dependent blocking capabilities. The possible impacts of the anodization conditions and the physical features of PS on the electrical characteristics are discussed in detail. Low leakage currents (<10 µA) have been demonstrated up to several hundred voltages for both bias polarities. The forward blocking voltage decreases with increasing PS thickness, while an opposite trend is observed for the reverse blocking voltage. This paper confirms the interest of PS as a potential insulating material for power device manufacture. [ABSTRACT FROM AUTHOR]

A novel fast-switching lateral-insulated gate bipolar transistor (LIGBT) with double gates and integrated Schottky barrier diode (SBD) is proposed and studied in this paper by TCAD simulation. In order to reduce the turn-off time and maintain a low forward voltage drop, the proposed structure introduces an integrated SBD structure at the anode and an additional trench gate at the cathode. First, the integrated SBD provides an extra electron extraction path and the additional trench gate enhances the injection of the N+-cathode. Furthermore, the insulated oxide pillar between the N-buffer and integrated SBD further reduces the snapback voltage. Finally, the simulation results show that the turn-off time of the conventional LIGBT is 52.4% larger than that of trench/planar gate SBD (TP-SBD) LIGBT under the same forward voltage of 1.49 V. Moreover, the latch current density of TP-SBD LIGBT is increased by nearly 200% compared to that of the conventional LIGBT, while almost the same latch voltage is obtained, so the proposed TP-SBD LIGBT can improve the latch immunity. [ABSTRACT FROM AUTHOR]

Silicon carbide (4H-SiC) devices experiencing avalanche conditions can reach temperatures above 1500 K. Simulation of impact ionization in devices should, therefore, include models valid up to such high temperatures. However, calibrations of impact ionization coefficients are available only up to 580 K, and simulations of switching show deviations from measurements at higher temperatures. In this paper, a more accurate model based on the underlying physics of high temperature and anisotropic avalanche generation is proposed. This model enables calibrations performed at room temperature along the ${c}$ -axis to be more precisely extrapolated to any temperature of interest in 2-D device simulations. The model provides an excellent fit to the measurements of breakdown voltages during unclamped inductive switching tests of power MOSFETs, enabling a more accurate prediction of ruggedness. The more comprehensive physics included in the model makes it also applicable to other wide bandgap semiconductors such as GaN, diamond, and Ga2O3, which also exhibit a high critical electric field. [ABSTRACT FROM AUTHOR]

In this paper, we develop an accurate analytical electrostatic potential model for both the n-type and p-type double-gate heterostructure tunnel field-effect transistors (H-TFETs). We solve the Poisson’s equation in four distinct regions inside the device, the depletion regions of the source, channel, and drain, and the drift-diffusion region of the channel, where the mobile charge carriers should be taken into account. It is shown that the model predicts the electrostatic potential profile of the various heterostructure devices with different material systems in all regions of the device operation accurately. The potential model is used for developing a model for the tunneling distance at the given energy level. Due to the physical nature of the models, the influence of the transistor parameters on the electrostatic characteristics of H-TFETs with desired heterojunction materials may be easily pursued. We show that the model results accurately predict the numerical simulation results for different device parameters. [ABSTRACT FROM AUTHOR]

Leakage phenomena are increasingly affecting the performance of nanoelectronic devices, and therefore, advanced device simulators need to include them in an appropriate way. This paper presents the modeling and implementation of direct source-to-drain tunneling (S/D tunneling), gate leakage mechanisms (GLMs) accounting for both direct tunneling and trap-assisted tunneling, and nonlocal band-to-band tunneling (BTBT) phenomena in a multissubband ensemble Monte Carlo (MS-EMC) simulator along with their simultaneous application for the study of ultrascaled fully depleted silicon-on-insulator, double-gate silicon-on-insulator, and FinFET devices. We find that S/D tunneling is the prevalent phenomena for the three devices, and it is increasingly relevant for short-channel lengths. [ABSTRACT FROM AUTHOR]

Oxide semiconductors are highly attractive for fabrication of large-area thin-film electronics because of their high electrical performance, low process temperature, high uniformity, and ease of industrial manufacturing. n-type oxide semiconductors, such as InGaZnO, are highly developed and have already been commercialized for backplane drivers of flat-panel displays. To date, developing CMOS technology is still an urgent issue in order to build low-power electronic circuits based on oxide semiconductors. In this paper, various CMOS circuits, including inverters, NAND, NOR, XOR, d-latches, full adders, and 7-, 11-, 21-, and 51-stage ring oscillators (ROs), are fabricated based on sputtered p-type tin monoxide and n-type InGaZnO. The inverters show rail-to-rail output voltage behavior, low average static power consumption of 8.84 nW, high noise margin level up to ~40% supply voltage, high yield of 98%, and high uniformity with negligible standard deviation. The NAND, NOR, XOR, d-latches, and full adders show desirably ideal input–output characteristics. The performances of ROs indicate small stage delay of $\sim 1~\mu \text{s}$ , extremely high uniformity and high yieldwhich are essential for large-area thin-film electronics. This paper may inspire constructions of low power, large area, large scale, and high-performance transparent/flexible CMOS circuits fully based on oxide semiconductors for applications beyond flat-panel displays. [ABSTRACT FROM AUTHOR]

In this paper, we propose a physics-based compact model of the pinned photodiode (PPD) combined with the transfer gate. A set of analytical expressions is derived for the 2-D electrostatic profile, the PPD capacitance, and the charge transfer current. The proposed model relies on the thermionic emission current mechanism, the barrier modulation, and the full-depletion approximation to obtain the charge transfer current. The proposed physics-based model is fully validated with technology computer-aided design simulations, i.e., stationary and optoelectrical simulations. The development of such a compact model for PPD represents an essential step toward the design, simulation, and optimization of PPD-based pixels in CMOS image sensors. [ABSTRACT FROM AUTHOR]

In modern electronic devices, a variety of novel materials have been introduced such as transition metal oxides, chalcogenides, ferroelectric, and magnetic materials. The electrical response of such materials, used also as active layers, is strongly affected by atomic defects, which affect device performances, variability, and reliability. Extracting the defect properties (i.e., density, energy, and atomic nature) is, thus, crucial to both engineer the performances of electron devices and correctly project their scaling potential and reliability. In this paper, we propose a simple method to extract the atomic properties of defects from the thermal activation energy of the leakage current using a charge trapping relaxation model. [ABSTRACT FROM AUTHOR]

This paper reports the fabrication of MEMS-based guided two-beam piezoelectric energy harvester for low-frequency operation. A highly c-axis-oriented zinc oxide thin film of 2.5- $\mu \text{m}$ thickness covered with 0.5- $\mu \text{m}$ plasma-enhanced chemical vapor deposition SiO2 is sandwiched between the aluminum electrodes to form split electrodes on the two beams. A pyramidal-shaped seismic mass that gives a higher electric potential is realized by bulk micromachining using CMOS compatible 25 wt% tetramethyl ammonium hydroxide wet etching. The thickness of the beams is optimized using deep reactive-ion etching to achieve a low-frequency operation. COMSOL Multiphysics has been used to study the stress distribution to optimize the dimension and placement of the split electrodes. The optimized split electrodes give a reduced resonance frequency by 4.2% when compared with previously used electrode pattern ensuring maximum electric potential generation for guided two-beam structure. The resonance frequency of the device measured experimentally using laser Doppler vibrometer comes to be 466 Hz. The packaged device exhibits a maximum sensitivity of 1.5089 mV/m/s2 in the frequency range from 160 to 1000 Hz. [ABSTRACT FROM AUTHOR]

In this paper, a universal analytical current model for a double-gate Si-based tunnel field-effect transistor (TFET) is presented considering the effects of charges in source depletion region and channel. An accurate surface potential model is developed first by solving the pseudo-2-D Poisson equations in the depletion regions, and then is used to calculate the drain tunneling current. The modeling results match well with that obtained from the Technology computer-aided design simulations under various biasing conditions, which indicate that the analytical current model would be very helpful for the further TFET-based circuits design. Furthermore, the influence of the source depletion is also studied, and the presented model with considering the source depletion region and the channel inversion charges is proved to be much more accurate than that ignoring the source depletion. [ABSTRACT FROM AUTHOR]

The inclusion of quantum effects in the transport direction plays an important role in the extensive research of ultrascaled electronic devices. In this context, it is necessary to study how these phenomena affect different technological architectures in order to conclude which one can be the best candidate to replace standard technology. This paper presents the implementation of direct source-to-drain tunneling effect in a multisubband ensemble Monte Carlo simulator showing its influence in different structures such as fully depleted silicon-on-insulator, double-gate silicon-on-insulator, and FinFET devices. The differences in the potential profile and the electron distribution in the subbands for these architectures modify the number of electrons affected by this quantum mechanism and, therefore, their short-channel behavior. [ABSTRACT FROM AUTHOR]

With the aid of an analytical and general model, this paper investigates the intrinsic difference in the negative-capacitance (NC) effect and design space between semiconductor-on-insulator (SOI) and double-gate (DG) metal–ferroelectric–insulator–semiconductor-type NC field-effect transistors (NCFETs) with a 2-D semiconducting transition-metal-dichalcogenide channel (2-D NCFET). By examining the distributions of internal charge, voltage gain, and capacitance matching over the whole bias range, the intrinsic difference in NC effects between these two topologies is pointed out and explained. Our study indicates that for an intrinsic DG 2-D NCFET, it is difficult to achieve sub-2.3 kT/q average subthreshold swing (SS). By contrast, the bias-dependent subthreshold internal charge and larger curvature of ferroelectric capacitance due to the independent backgate in the SOI 2-D NCFET enable larger design space and sub-2.3 kT/q average SS, making it more suitable for low-power applications. [ABSTRACT FROM AUTHOR]

In this paper, we report on the assessment of self-amplified silicon–oxide–nitride–oxide–silicon (SONOS) memory device architecture for sub-50-nm gate length (${L}_{g}$) through calibrated simulations. Self-amplification (SA) effect in tunnel field-effect transistor-based SONOS (T-SONOS) memory device has been analyzed. Results show that memory window ($\Delta {W}$) in T-SONOS cell increases as buried oxide thickness increases due to capacitive coupling between the front and back gates. Although the enhanced $\Delta {W}$ can also be achieved in inversion-mode SONOS (I-SONOS) device, its performance is deteriorated when the gate length is scaled down. We have compared the performance of I-SONOS and T-SONOS memory devices for ${L}_{g}$ varying from 100 to 25 nm. Results highlight that I-SONOS device cannot be programmed at ${L}_{g} ={25}$ nm and thus deteriorate the memory operation. However, SA T-SONOS at ${L}_{g} = {25}$ nm achieves ${W} \sim {6}$ V. In addition, the effect of underlap on the performance of T-SONOS cell has been analyzed, and it is shown that memory operation of 25-nm T-SONOS device can further improved with a drain side underlap of 20 nm. This paper provides new opportunities to design SA T-SONOS memory device for the next-generation nonvolatile memories. [ABSTRACT FROM AUTHOR]

The introduction of metal nanocrystals (NCs) has been confirmed to improve electrical uniformity of oxide-based resistive random access memory (RRAM) devices significantly; however, the current reports do not systematically elucidate the relationship between the size/distribution of NCs and the electrical uniformity of RRAM devices. In this paper, we focused on the impact of metal NCs size and areal density on the resistive switching (RS) performances of oxide RRAM by atomic layer deposition (ALD) based on the experimental results and theoretical calculation. The dependence of ALD cycles of 50–130 during Pt or CoPtx NCs growth on the RS parameters of Al2O3 or HfO2 memory units has been evaluated systematically. The RRAM embedded Pt or CoPtx NCs shows the trends: with increasing ALD cycles, the forming voltage, set/reset voltage, the resistance in off and on state, and ${R}_{ \mathrm{\scriptscriptstyle OFF}}/{R}_{ \mathrm{\scriptscriptstyle ON}}$ ratio entirely first decrease, then flatten, and increase later with a minimum value at about 100 cycles. Although all metal NCs with various sizes enhance the electric field strength compared to at the planar region, only metal NCs with proper NCs size and areal density (9 nm/6– $10\times 10^{\textsf {11}}$ /cm2 in this paper) can effectively produce stronger localized electric field at the tip of metal NCs, leading to optimal RS behavior. [ABSTRACT FROM AUTHOR]

When developing silicon carbide (SiC) devices, the reliability of the internal body diode is an important issue. Stacking faults (SFs) are expanded from basal plane defects by using a body diode. Although it is well known that ON-voltage degradation occurs due to SFs, their effects on dynamic reliability have not been studied well. Furthermore, including the effects of SFs, there are not many reports about the dynamic reliability of SiC-MOSFETs. In this paper, a double-pulse switching test using 3.3-kV SiC-MOSFETs was carried out to clarify the failure mechanism of the switching operation of SiC-MOSFETs and effects of SFs on the safe operation area (SOA). Before the switching test, current stress was applied to the body diode of the devices under test (DUTs) to expand the SFs. The circuit configuration was half-bridge type, and a double-pulse gate signal was applied to the lower arm DUT. The switching voltage was 1.8 kV, and the switching current increased at about 8-A steps to failure. As a result, reverse recovery SOA (RRSOA) reliability decreased depending on the amount of SFs in the SiC-MOSFET. Because RRSOA failure was caused by avalanche due to the hole concentration during reverse recovery and the SFs raised local current density, reverse bias SOA (RBSOA) hardly decreased even if SFs containing SiC-MOSFETs were used. This is because RBSOA failure was caused by degradation of the gate isolation layer due to overheating and the temperature coefficient of the SFs electric resistance indicated negative. [ABSTRACT FROM AUTHOR]

This paper presents a comparison of switching performances between the in-situ oxide, gallium nitride (GaN) interlayer FET (OG-FET) and the conventional GaN metal–oxide–semiconductor FET (MOSFET), and explores the influence of the channel electron mobility on the device switching performance. GaN OG-FET is a novel structure with a pristine GaN layer grown between the gate oxide and the p-GaN enhancing the channel mobility up to 185 cm2/ $\text {V}\cdot \text {s}$ , which is over $3{\times}$ larger than that of the typical reported value (50 cm2/ $\text {V}\cdot \text {s}$) in GaN MOSFET. Owing to the high channel electron mobility, the GaN OG-FET showed a switching loss 30% lower than that of the conventional GaN trench MOSFET. Our results indicate that GaN OG-FET has the potential to attain greater efficiency, particularly at higher frequencies, showing a possible patch toward megahertz range conversions. [ABSTRACT FROM AUTHOR]

The application of capacitive deep trench isolation (CDTI) as a shared vertical transfer gate (VTG) in a back-side-illuminated CMOS image sensor pixel is investigated using 3-D device-level simulations. The parasitic capacitance existence between CDTI and deeply buried pinned photodiode (BPD), and also between CDTI and floating diffusion (FD) region, makes the charge transfer process more difficult. In order to design a lag-free pixel and obtain complete charge transfer from BPD to FD, various considerations regarding the device-level design should be taken into account which is discussed in this paper. A CDTI neighboring two pixels can be functionalized as a shared VTG. Using CDTI as shared VTG facilitates pixel miniaturization and can result in more circuit integration at the pixel surface. This paper proposes a ${2}\,\,\mu \text{m} \times {2}\,\,\mu \text{m}$ pixel with CDTI as shared VTG, an equilibrium full-well capacity of 4605 e−, and a complete charge transfer from BPD to FD. [ABSTRACT FROM AUTHOR]

This paper proposes an accurate modeling method to inspect the resistance of JFET region in a silicon carbide (SiC) MOSFET in which piecewise linear approximation of doping profile of the p-well is utilized to simplify the calculation process. With depletion width and scatter width both considered, the newly developed model could obtain the JFET resistance more accurately than the conventional models reported. Sentaurus TCAD simulations and experimental studies are performed to verify the accuracy of the proposed model method. Additional nitrogen implantations for the JFET region are also included to further demonstrate the accuracy of the model. The developed model could help analyze the percent of JFET resistance in the total device on-state resistance, thus providing a guideline for the optimization of SiC MOSFETs. [ABSTRACT FROM AUTHOR]

In this paper, we present a charge-based compact model for transition metal dichalcogenide (TMD)-based thin-channel field-effect transistor. In model development, first, charge densities at the source and drain terminals are calculated in terms of the applied gate and drain voltages. Calculated charge densities are then used to develop a charge-based drain-current model. Effects of interface traps, ambipolar current behavior, and negative capacitance are then included in the developed drain-current model in terms of charge densities. Predictions of the proposed model are verified by the simulation and experimental data of the TMD channel material-based n-type and p-type MOSFETs. [ABSTRACT FROM AUTHOR]

In this paper, we demonstrate the linear conductance-change characteristics of a conductive-bridging RAM (CBRAM) to be employed as an artificial synapse device in neuromorphic systems. The CBRAM with a bilayer electrolyte structure (${\mathrm {Cu/Cu}}_{{2}-{x}}\text{S}$ / $\mathrm {WO}_{{3}-{x}}$ /W) exhibits analog switching behavior during the depression process due to the well-controlled dissolution of the conductive filament. To analyze the origin of this motion, we investigate the effective voltage applied to $\mathrm {Cu}_{{2}-{x}}\text{S}$ and $\mathrm {WO}_{{3}-{x}}$. Our findings reveal that $\mathrm {Cu}_{{2}-{x}}\text{S}$ , acting as a voltage divider, helps in suppressing the large voltage drop in $\mathrm {WO}_{{3}-{x}}$ , where the formation/dissolution of filament occurs. Furthermore, due to the diode-like characteristics of $\mathrm {Cu}_{{2}-{x}}\text{S}$ and the division of voltage drop between $\mathrm {WO}_{{3}-{x}}$ and $\mathrm {Cu}_{{2}-{x}}\text{S}$ , an optimum programming energy is applied to $\mathrm {WO}_{{3}-{x}}$ during the depression process. This leads to linear conductance-change characteristics under identical pulses. However, abrupt conductance-change characteristics are observed during the potentiation process. Thus, we use only the device characteristics of the depression part for the neuromorphic system. An excellent classification accuracy is achieved due to the linear conductance-change characteristics and optimized pulse conditions. [ABSTRACT FROM AUTHOR]

This paper presents a generalization of the charge-based model for ultrathin junctionless double-gate (JLDG) field-effect transistors (FETs) by including quantum electron density. The analytical derivation relies on a first-order correction to the infinite quantum well. When restricting the analysis to the first and second quantized states, the free carrier charge distribution and the current in an ultrathin body JLDG FETs are in agreement with numerical TCAD simulations in all the regions of operation, i.e., from deep depletion to accumulation and from linear to saturation. [ABSTRACT FROM AUTHOR]

Silicon-on-insulator (SoI) technology has been reported as a technique to improve electrical characteristics over those of bulk MOSFETs. However, this approach results in the disadvantage of increased drain-induced barrier lowering (DIBL) due to drain electric flux (or field) passing through the buried oxide (BOX) layer. Against such a background, the development of a method to easily estimate the amount of this electric flux is expected to support the prediction of BOX-related DIBL. This paper involved the investigation of a model-derived analytically using conformal mapping techniques to represent the amount of flux in subthreshold regions of ground-plane SoI MOSFETs. To create the model, this paper was divided into two parts. In Part I, as preparation for model development, the relationships between coordinates in MOSFETs and potential/stream function were derived using conformal mapping, and related validity was verified. In Part II, the model’s development was considered based on these relationships, and its validity was also verified. [ABSTRACT FROM PUBLISHER]

An analytical model for junctionless double-gate FETs (JLDGFETs) in the subthreshold region is proposed in this paper. As the analytical models based on Young’s approximation demonstrate certain limitations due to the heavily doped channel of the JLDGFET, it is essential to model the electrical characteristics of a JLDGFET using alternative methods. Therefore, in this paper, by using the Fourier series and Green’s function, the potential distribution ( \phi ( {x} , {y} )) in the channel is solved, and the hot-carrier effects and random dopant fluctuation are modeled using localized trap charges and macroscopic analysis. Using the calculated \phi (x, y), {I} _{{\mathsf {DS}}} and {V} _{{\mathsf {th}}} are solved analytically with respect to various L and t {\mathsf {ox}} variations, subthreshold swing, the drain-induced barrier lowering, the localized trap charges, and a single impurity dopant. All results from the analytical model are verified through comparisons with commercially available 2-D ATLAS numerical simulation results. [ABSTRACT FROM PUBLISHER]

The impact of triple metal with unalike work functions on the gate all around (GAA) tunnel FET is studied for the first time in this paper. An analytical model is introduced for surface potential and drain current of GAA triple metal tunnel FET with circular cross section, by using Poisson’s equation and Kane’s model. The modeling results are in good agreement with Synopsys 3-D TCAD results, thereby corroborating our analysis. The different metal work functions assist to create the potential barrier in the channel region to suppress the reverse tunneling from the drain side and also provides a more band bending at source end which revamp the drive current. [ABSTRACT FROM PUBLISHER]

In this paper, an n-p-n collector incorporated in the back side of a 4H-SiC trench IGBT is presented to reduce the turn-off energy loss. A comparative study between the proposed structure and the conventional structure is conducted through ATLAS. The simulation results have demonstrated that the turn-off energy loss is reduced by more than 82.96% with a slight degradation in the on-state voltage drop. [ABSTRACT FROM PUBLISHER]

This paper studies on the RF MEMS switch based on flexible liquid crystal polymer (LCP) substrate and the influence of the LCP substrate bending characteristics on mechanical properties of the switch. Due to the excellent properties of flexible LCP materials, RF MEMS devices based on LCP substrates will be very suitable for microwave systems with high space requirements and wearable devices. Obviously, the deformation of flexible substrate will affect the performance of RF MEMS switch. Therefore, this paper proposes a modeling of the substrate bending to analyze it. The experimental results of the fabricated switches show that the pull-in voltage of the switch is $\sim 22$ V, the insertion loss is better than −0.6 dB, the isolation is better than −15 dB, and the return loss is better than −18 dB up to 20 GHz. According to the experiments, we can find that when the curvature of the substrate is increased from zero to 22.2 (1/m), then the measured pull-in voltage is increased from 22.1 to 23.9 V and when the curvature of the substrate is increased from 22.2 to 44.2 (1/m), then the measured pull-in voltage is decreased from 23.9 to 18.9 V. In conclusion, with the increase of substrate curvature, the switch pull-in voltage will increase at first and then decrease. The experimental results are in good agreement with the modeling. [ABSTRACT FROM AUTHOR]

Thanks to the high electron velocities, III–V semiconductors have the potential to meet the challenging ITRS requirements for high performance for sub-22-nm technology nodes and at a supply voltage approaching 0.5 V. This paper presents a comparative simulation study of ultrathin-body InAs, In0.53Ga0.47As , and strained Si MOSFETs, by using a comprehensive semiclassical multisubband Monte Carlo (MSMC) transport model. Our results show that: 1) due to the finite screening length in the source-drain regions, III–V and Si nanoscale MOSFETs with a given gate length (L{G}) may have a quite different effective channel length (Leff) ; 2) the difference in Leff provides a useful insight to interpret the performance comparison of III–V and Si MOSFETs; and 3) the engineering of the source-drain regions has a remarkable influence on the overall performance of nanoscale III–V MOSFETs. [ABSTRACT FROM AUTHOR]

A comprehensive study on the dielectric modulated (DM) drift region for power devices is presented in this paper. The performance of this drift region structure is theoretically analyzed and compared with other two structures: conventional and superjunction. In this paper, a study is focused on switching performance. The C – V relationships during switching are analytically derived, and the depletion widths predicted by the proposed analytical model agree well with simulation in a wide reverse bias region. The switching energy loss is evaluated based on the analytical model and its accuracy is verified by 2-D simulations. An effective depletion charge QD is defined as E\mathrm {loss} / breakdown voltage (BV), from which a figure of merit (FOM) of R\mathrm{\scriptscriptstyle ON,\mathrm {sp}}{}^\ast QD is proposed to compare the performances of these different drift region structures, considering both the conduction and switching losses. The discussions in part I on Si and silicon carbide device structures are extended in part II to include FOMs. It is found that the DM drift region structures show better R\mathrm{\scriptscriptstyle ON,\mathrm {sp}} -BV tradeoffs compared with the conventional structures, but slighter inferior FOMs. However, DM structures are still attractive for applications, where switching loss is less critical than the conduction loss, such as low frequency or soft switching. [ABSTRACT FROM PUBLISHER]

This paper reveals an early quasi-saturation (QS) effect attributed to the geometrical parameters in shallow trench isolation-type drain-extended MOS (STI-DeMOS) transistors in advanced CMOS technologies. The quasi-saturation effect leads to serious gm reduction in STI-DeMOS. This paper investigates the nonlinear resistive behavior of the drain-extended region and its impact on the particular behavior of the STI-DeMOS transistor. In difference to vertical DMOS or lateral DMOS structures, STI-DeMOS exhibits three distinct regions of the drain extension. A complete understanding of the physics in these regions and their impact on the QS behavior are developed in this paper. An optimization strategy is shown for an improved gm device in a state-of-the-art 28-nm CMOS technology node. [ABSTRACT FROM AUTHOR]

In this paper, a microfluidic device is introduced based on direct current (dc) dielectrophoresis for the separation of circulating tumor cells from normal blood cells. Differential sidewall electrodes are designed inside the channel and two middle-channel outlets are located after the end of the electrodes, which are assigned to collect the normal blood cells. A maximum dc potential of 3 V is applied to the electrodes, resulting in a differential dielectrophoretic forces acting on the cells. This paper involves isolating MCF-7 breast cancer cells from white blood cells (WBCs) and red blood cells (RBCs), eliminating the demand for primary RBC lysis. Numerical simulation results revealed that the differential electrodes not only suppressed successfully the need for high applied voltages by dc dielectrophoresis but also diminished the joule heating effects. Besides that, the arrangement of the differential electrodes was observed to play a critical role in the separation performance. In particular, designing the outlets, as well as adjusting the electrode potentials, has effectively assisted the device to be tunable for different cancer cells even with different radii. More strikingly, the ability of the device to deflect the waste cells (WBCs and RBCs) to out of the microchannel prior to the cancer cells was proven to positively affect the separation efficiency and purity. The proposed device was capable of separating different cells leveraging various diameters with capture purity and efficiency of higher than 83% and 100%, respectively. [ABSTRACT FROM AUTHOR]

In this paper, a resistance-based drain current model for dual-gate graphene FETs (GFETs) is presented, in which an existing analytical model for the sheet charge density for dual-gate structures has been extended for single-gate architectures. In addition, in order to ensure charge and potential continuity throughout the device, unaccounted for in the literature, a new parameter, Debye length, for graphene has been introduced, and a heuristic model for it has been proposed. The carrier mobility in graphene has been modeled in this paper by proposing a new hypothesis for carrier transport in the graphene layer of GFETs, and is a function only of the applied voltages—resulting in significant savings in terms of computational time. Also, the source and drain region resistances (assumed constant in the literature, which is physically unacceptable) have been modeled in this paper based on the charge distributions in these regions. The modeled drain current not only produced well-behaved drain conductance and transconductance over the entire bias range but also showed a very good match with the experimental data published elsewhere, while reducing the maximum error as compared with the simulated results of some existing works. [ABSTRACT FROM PUBLISHER]

A detailed presentation of the latest version of Leti-UTSOI compact model is provided. Leti-UTSOI2 is the first available model able to describe the behavior of ultrathin body and BOX fully depleted silicon-on-insulator transistors in all bias configurations, including strong forward back bias. In this paper, compact modeling of intrinsic currents and charges, including all physical effects required to describe decananometer transistors, is detailed. This model is valid for all independent double-gate architectures, very accurate and feature excellent predictability over technological parameters. [ABSTRACT FROM AUTHOR]

4H-silicon carbide (SiC) is a suitable candidate for high-temperature and radiation prone applications, due to its superior electrical and material properties. Several researchers have demonstrated small-scale logic circuits, entirely in 4H-SiC; however, to build a complete electronic module in 4H-SiC, a memory component is yet to be developed. This paper presents for the first time the design, optimization, and performance analysis of a 4H-SiC-based bipolar memory column including a static random access memory cell and peripherals, designed for voltages as low as 5 V. The memory column has average noise margins of 2 V and delays in the range of few nanoseconds at room temperature. The proposed memory architecture also demonstrates robust operation across a wide range of temperatures (27 °C–500 °C) with stable noise margins and speeds. This paper validates the potential of developing memory architectures in 4H-SiC, which operates reliably for varying conditions, paving the way to build complete electronic systems entirely based on 4H-SiC. [ABSTRACT FROM AUTHOR]

Performance of the crossbar memory array highly depends on the selector characteristics. In this paper, rigorous transient analyses are performed for a large-size crossbar memory array using novel NbO2-based selectors with a threshold switching behavior. To enable accurate and efficient array-level simulation, an electrostatic discharge-based compact model is employed to effectively describe the ${I}$ – ${V}$ characteristics of the selector. Multiple key design parameters of the selector are investigated, such as the threshold voltage, leakage current, and intrinsic switching speed. A sensitivity analysis is performed to evaluate the impact of hypothetical improvements in various selector parameters. In addition, the impacts of resistances of interconnect and memory element on the array-level access delay and energy dissipation are quantified. The results show that reducing the threshold voltage of selectors provides the most significant performance improvement, where up to 80% of the energy-delay product saving is observed if the threshold voltage is reduced by 50%. [ABSTRACT FROM AUTHOR]

Performance limitations of superjunction (SJ) devices due to charge imbalance (CI) are analyzed in this paper. It is demonstrated that in the presence of CI, the specific on-resistance has a quadratic dependence on blocking voltage, similar to a conventional drift region. We also show that by designing the SJ structure with an optimally modified pillar doping, we can achieve better performance under conditions of CI. The design guidelines presented in this paper are applicable to any semiconductor, although all calculations are based on silicon carbide. [ABSTRACT FROM AUTHOR]

In this paper, a n-type junctionless FET (JLFET) with a p-type fin body (FB) is investigated using a 3-D numerical simulator. We show that the proposed device (FB-JLFET) with a p+ FB can control the electrostatic potential of the channel more efficiently for multi- ${V} _{\text{TH}}$ (threshold voltage) and dynamic threshold (DT) operation. Moreover, body bias application is implemented in FB-JLFET and a large body factor ($\gamma $) is predicted for wide range ${V} _{\text{TH}}$ modulation. Thanks to the stronger potential coupling between the channel and FB, the proposed device exhibits $\gamma $ improvement compared to the conventional JL bulk FinFETs under the same electrostatic control. In addition, DT operation is studied in the form of a JLFET for the first time and it exhibits 37% improvement of the on-state drive current and better subthreshold swing (S.S.) compared to FB-JLFET without DT. This paper provides the feasibility of multi- ${V} _{\text{TH}}$ operation with body bias mode for high performance or low-power applications and DT operation for high-speed circuits with low power consumption. [ABSTRACT FROM AUTHOR]