Search

The modular multilevel converter (MMC), owing to the presence of a large number of submodules (SMs) and energy storing elements, requires a large footprint and initial investment. To address these issues, this paper proposes the switched modular multilevel converter (SMMC). It consists of two major elements; the chain-links (CLs), consisting of cascade connection of SMs as in MMC, and the single-pole-triple-throw (SPTT) switches, which can be realized using either the T-type or NPC-type switch strings. The SMMC works on the principle of connecting all the phase-legs in series and their respective positions are mutually interchanged. It offers a compact structure as the SMs count is reduced to 33% of MMC, which results in a much lower energy storage requirement. Furthermore, it does not have inter-phase circulating current problem and hence the CL inductors can also be avoided. The SMMC structure, operating principles, control, and modulation schemes are explained in detail. A detailed comparison of SMMC with the other major existing converters is carried out to highlight the important features of SMMC. The efficacy of SMMC is validated using PSCAD simulation studies with a 19-level grid-connected SMMC model. A 3-phase 19-level SMMC laboratory prototype is developed to further validate its feasibility. [ABSTRACT FROM AUTHOR]

Modular multilevel converters (MMCs) in high- voltage applications contain large numbers of power switches, which increases the fault probability inside MMCs. This paper proposes a detection method for the faulty arm containing switch open-circuit failures in high-voltage MMCs to improve the reliable operations of MMCs. The proposed method uses the periodicity of the deviation between the maximum and minimum capacitor voltages to provide the detection reference. To yield a reliable reference, the repetitive signal generator is employed. Then, the fault is identified by the difference between the referenced and measured capacitor voltage deviations. An auxiliary criterion is also designated to avoid the false detection caused by the mutations in MMCs. The proposed method can reduce the difficulty in the selection of thresholds. Moreover, the proposed method is robust in high-voltage MMCs with inferior capacitor voltage balancing performance, which ensures detection rapidity and accuracy. Finally, the feasibility of the method is verified by simulation results in Matlab/Simulink. [ABSTRACT FROM AUTHOR]

Piezoelectrically actuated fast mechanical switches provide a low-loss conduction path in hybrid circuit breakers for protecting medium-voltage direct-current systems. As the desired actuation speed approaches the driving limit of a piezoelectric actuator, excessive vibration starts to dominate its underdamped travel curves, resulting in insulation failures and delayed switching in the fast mechanical switch. To improve the underdamped travel curves into critically damped travel curves, several switching motion control schemes with active damping filters are proposed in this paper. The switching motion controllers are based on an electromechanical model of a fast mechanical switch with experimentally identified parameters. According to hardware implementation tests, the proposed closed-loop control schemes optimized the switch travel curves with a 56% reduction in the undershoot and a 75% reduction in the settling time. Equipped with the critically damped travel curves, the piezoelectrically actuated fast mechanical switch is better suited for sequential submodule operations to reduce the interruption time, the peak current and the fault energy to be absorbed in hybrid circuit breakers. [ABSTRACT FROM AUTHOR]

Uncertainties in power system studies are typically managed by Monte Carlo methods or by applying some worst case assumptions. As the number ofuncertainties increases, there is a need for methods that can estimate statistical parameters from a limited number of calculations. This paper utilizes a method called the Unscented Transform together with Cornish-Fisher expansion to estimate the 2%-value of switching overvoltages using only about one tenth the number of calculations as a Monte Carlo method, with similar accuracy. The uncertainties considered are the energizing instants of the three phases. The method is illustrated through EMT simulations in PSCAD and it is shown to provide a good approximation of the 2%-value in most of the studied cases. [ABSTRACT FROM AUTHOR]

In this paper, we address the finite-time and fixed-time synchronization of a general class of switched neural networks (SNNs) with time delays subject to stochastic disturbances. Considering two types of switching in this class of SNNs: 1) intra-SNN state-dependent switching and 2) inter-SNN Markovian switching, we develop three control laws and derive three sets of sufficient conditions for both finite-time and fixed-time synchronization of SNNs subject to stochastic disturbances. We make two remarks on the effects of control-law parameters on synchronization settling time. Moreover, we derive several upper bounds of synchronization settling time and evaluate their pros and cons. Finally, we elaborate on two numerical examples to illustrate the viability of the theoretical results. [ABSTRACT FROM AUTHOR]

IPC (Inter-Process Communication) is a widely used operating system (OS) technique that allows one process to invoke the services of other processes. The IPC participants may share the same OS (internal IPC) or use a separate OS (external IPC). Even though a long line of researches has optimized the performance of IPC, it is still a major factor of the run-time overhead of IPC-intensive applications. Furthermore, there is no one-size-fits-all solution for both internal and external IPC. This paper presents SkyBridge, a general communication technique designed and optimized for both types of IPC. SkyBridge requires no involvement of the privileged software (the kernel or the hypervisor) and enables a process to directly switch to the virtual address space of the target process, regardless of whether they are running on the same OS or not. We have implemented SkyBridge on two microkernels (seL4 and Google Zircon) as well as an open-source serverless hypervisor (Firecracker). The evaluation results show that SkyBridge improves the latency of internal IPC and external IPC by up to 19.6x and 1265.7x, respectively. [ABSTRACT FROM AUTHOR]

The demand for real-time data processing has become increasingly attractive in Cyber-Physical Systems(CPSs), especially for data-intensive embedded real-time applications. In order to timely perceive and respond to environmental changes, the basic design requirement in such systems is to provide data service with high freshness. As modern CPSs become more complex, there are a broad set of system mode switch behaviors, some unforeseen, in a dynamic computational environment. However, conventional control algorithms can hardly handle such new scenarios, since most of them assume that the operational behavior is fixed. In this paper, we study the problem of how to maximize the freshness of data in multi-modal systems. We first use a recently proposed new conception, namely Age of Information (AoI) to quantify the freshness of data by combining the AoI metric with real-time constraints. Then, we propose, to our knowledge, the first freshness-aware scheduling solution to settle the problem via deep reinforcement learning(RL). To be specific, we develop an RL framework that can continuously update its scheduling strategies and maximize the freshness of data in the long term. Extensive simulation experiments are conducted and the results demonstrate that the proposed FAS-DQN outperforms other traditional state-of-the-art methods in terms of data freshness. [ABSTRACT FROM AUTHOR]

The digital implementation of all the control loops of a versatile buck-boost (VBB) dc–dc converter used in a stand-alone photovoltaic application is proposed in this paper to improve existing digital-analog sliding-mode-based implementations. All three control loops: maximum power point tracking (MPPT), fast input voltage regulation, and inner high-bandwidth current control, have been programmed in the same digital signal controller (DSC). A Model Predictive Control (MPC) based algorithm has satisfactorily solved the challenge of implementing the nominal 100 kHz switching frequency current loop. The MPC cost function is distributed throughout the algorithm to achieve three specific goals: the tracking of the reference current (G1), a quasi-constant steady-state switching frequency (G2), and the assurance that the duration of an interval is larger than the time required to calculate it (G3). The third goal requires the current control to toggle between peak- and valley-modes depending on the operating point. The correct fulfillment of these control objectives on the proposed MPC-based algorithm has been validated through simulations and experimental tests performed on a purpose built-prototype. [ABSTRACT FROM AUTHOR]

In this paper, a fault-tolerant control of a symmetrical six-phase induction generator based on a variable structure strategy is experimentally tested and compared with a classical proportional-integral controller. For this, we use a linear feedback sliding mode controller with switched feedback gains in such a way to control the inner current loops of this machine. One main drawback of the classical three-phase induction generator is that it is no longer possible to generate electrical power if only one phase is lost on the stator side. To overcome this issue, we will use a squirrel cage six-phase induction machine that can still operate when at least three phases remain on the stator side. This article proposes to use a variable structure control in order to cope with unbalanced currents and also maintain the generation of power when a loss of the stator's phases occurs. The proposed controller shows its robustness and good regulation performance in healthy and faulty modes. The simulation and experimental tests were carried out with a 24 kW induction machine that represents 1/100 of the electrical power of a real wind turbine. [ABSTRACT FROM AUTHOR]

In this paper a control method for a matrix converter (MC) based on the heterodyne concept from the communication field is presented. The method is used to convert the high frequency of a microturbine generator’s (MTG) output voltage to the utility grid’s frequency. In this control method a frequency modulation (FM) of the MC’s switching frequency is achieved using a DQ0 analysis of the converter’s filtered output voltage with the utility grid’s frequency as a reference. After filtration, the MC achieves a conversion to the reference frequency with a minimal total harmonic distortion (THD) of the output voltage while using a low switching frequency. In addition, the proposed method decouples the output frequency, phase angle and voltage amplitude, which allows them to be controlled separately. This significantly simplifies the required control, and enables a robust and low-cost design. The theoretical analysis, simulation and experimental results of the method are reported. [ABSTRACT FROM AUTHOR]

Differential power processing (DPP) converters have been developed for photovoltaic (PV) panels to preclude energy yield reduction due to partial shading. In large-scale PV systems comprising numerous series-connected panels, DPP converters with good modularity are preferable because the number of series-connected panels varies depending on applications. This paper proposes a switched capacitor converter (SCC)-based modular DPP architecture for large-scale PV systems. Four panels are grouped as a module, each having a panel-level DPP converter, and modules are connected in series to form a string. The design of the panel-level DPP converter is fixed while the system can be arbitrarily extended by stacking modules, achieving good modularity. Adjacent panel-level DPP converters are dc-coupled, by which modules can be connected using long cables, mitigating installation limitations. The experimental results of the laboratory and field testing demonstrated the energy yield enhancement by 10%–20%, depending on shading conditions. [ABSTRACT FROM AUTHOR]

This paper presents a sigma-modified adaptive control algorithm to enhance the charging profile in a multi-objective electric vehicle (EV) charging installation. The present algorithm takes care of multiple parametric uncertainties and grid non-idealities to provide an instantaneous control updation in order to achieve well-regulated charging dynamics. With the support of renewable energy and battery energy storage (BES), the present algorithm also ensures an uninterrupted charging profile with controller robustness and stability for bi-directional EV charging. The sigma-mod adaptive controller provides an iterative error convergence at each clock interval of supply voltage dynamics to guarantee improved power quality operation in presence of grid distortions. To further improve the reliability of EV charging opportunities, a solar photovoltaic (PV) array in conjunction with the battery energy storage supports the ancillary services through maximum power point operation. Multivariable sliding mode control and rule-based phase-shift adaptation at different stages of power transformation assure faster convergence, parameter uncertainty and controller stability for the bi-directional EV charging operation. A 3.3 kW PV-integrated off-board charging facility is designed and developed as a laboratory prototype to validate the multi-mode charging architecture with minimal grid dependency. [ABSTRACT FROM AUTHOR]

This paper proposes a novel dual input nine-level inverter (DINLI) topology which requires only seven controllable devices. The dual inputs are un-identical DC voltage sources in the ratio 1:3. A simple control scheme is derived by appropriately modifying the phase disposition pulse width modulation technique to generate high-quality 9-level output from the DINLI topology. At any given instant, a maximum of four switches conduct out of which only a maximum of two switches operate at high frequency, bringing down the switching and conduction losses significantly and improving the overall system efficiency. The bidirectional DINLI (BDINLI) topology with reactive power capability can be realized by replacing the unidirectional devices with the controlled switches (i.e., total nine switches). In addition, the proposed DINLI topology does not require extra voltage balancing circuits which further improves the efficiency. The DINLI operation is verified through MATLAB simulations for grid-connected applications and its extension to an n-level, 3-phase application is also investigated. Experiments performed on a 1KVA laboratory prototype to validate the theoretical claims. [ABSTRACT FROM AUTHOR]

Emerging device based spiking neural network (SNN) hardware design has been actively studied. Especially, energy and area efficient synapse crossbar has been of particular interest, but processing units for weight summations in synapse crossbar are still a main bottleneck for energy and area efficient hardware design. In this paper, we propose an efficient SNN architecture with stochastic spin-orbit torque (SOT) device based multi-bit synapses. First, we present SOT device based synapse array using modified gray code. The modified gray code based synapse needs only N devices to represent 2N levels of synapse weights. Accumulative spike technique is also adopted in the proposed synapse array, to improve ADC utilization and reduce the number of neuron updates. In addition, we propose hardware friendly algorithmic techniques to improve classification accuracies as well as energy efficiencies. Non-spike depression based stochastic spike-timing-dependent plasticity is used to reduce the overlapping input representation and classification error. Early read termination is also employed to reduce energy consumption by turning off less associated neurons. The proposed SNN processor has been implemented using 65nm CMOS process, and it shows 90% classification accuracy in MNIST dataset consuming 0.78μJ/image (training) and 0.23μJ/image (inference) of energy with an area of 1.12mm2. [ABSTRACT FROM AUTHOR]

Different from typical circuit breakers, breakers used to switch AC filters in convertor stations have to operate frequently according to the real-time operation mode and daily load changes. Therefore, the performance of filter breakers decreases very quickly, which leads to frequent accidents. Both preinsertion resistors and controlled switching devices can suppress switching transients. In this paper, a comparative analysis of whether a controlled switching device and preinsertion resistor should be adopted is carried out using PSCAD. The transient is calculated as the combined result of the switching angle and preinsertion resistor value, and the optimal configurations are proposed. After determining the resistor value and whether a controlled switching device should be included, the reference voltage of the arrester should be reevaluated. [ABSTRACT FROM AUTHOR]

This paper proposes a new passive Islanding detection approach for the Inverter Interfaced Distributed Generators (IIDGs) operating under different control modes. First, a novel index is formulated using Root Mean Square (RMS) value of the voltage and the frequency information, acquired at the Point of Common Coupling (PCC) of the target DG. The index is then post-processed by estimating the number of peaks and valleys $(N_{p_{k}-v})$ in a cycle using the sliding window concept, which indicates the occurrence of an event. Finally, the nature of the event, i.e., Islanding or non-Islanding, is decided by exploiting the two statistical features viz., Square of RMS $(S_{RMS})$ of $N_{p_{k}-v}$ and Average Crest Factor $(ACF^{m})$ of the proposed index. The performance of the proposed method (P-IDM) is demonstrated through comprehensive studies in PSCAD/EMTDC for the single-bus and IEEE 34-bus Active Distribution System (ADS). Also, the real-time validation is performed for the IEEE 34-bus using Controller Hardware-in-the-Loop (CHIL) setup comprising of Real-Time Digital Simulator (RTDS) and dSPACE1104. The simulation and hardware results for different test systems indicate that the proposed scheme, being generic in nature, sustains its efficacy under various interface controls of IIDGs. Finally, a comparative assessment with the other existing Signal Processing (SP) based passive methodologies shows the supremacy of the proposed method in terms of accuracy and faster detection. [ABSTRACT FROM AUTHOR]

This paper presents a combined control scheme that consists of two complementary control strategies, namely hierarchical control and autonomous control to handle contingencies in a multi-terminal high voltage direct current (MTDC) system. The proposed hierarchical control considers three optimal targets, i.e., equal or proportional power sharing, minimizations of transmission loss and total DC voltage variation. The primary control layer implements the droop control for voltage source converters (VSCs). While in the secondary control layer, voltage reference setpoints of the VSCs in droop control scheme are calculated by the proposed optimal power flow method with the equal or proportional power sharing as equality constraints. As the hierarchical control relies on communication system, the autonomous control for power sharing can be activated during communication system malfunctioning or rapid power variation caused by renewable energy sources. The combined control strategy can greatly increase the reliability of the MTDC system. The simulation results of a five-terminal MTDC network conducted in the MATLAB/Simulink software verify the performance of the proposed combined control strategy. [ABSTRACT FROM AUTHOR]

High penetration level of single-phase solar PVs in low voltage distribution systems has raised concern about the Voltage Unbalance (VU) level. Real-time phase reconfiguration using Dynamic Switching Devices (DSD) has been proposed as a cost-effective solution to mitigate the excessive level of Voltage Unbalance. DSDs are fast power electronics devices that could change the phase connection of a solar PV with minimum disturbances. Most of the proposed methodologies for controlling DSDs are based on a central controller and the assumption of availability of Advanced Metering Infrastructure (AMI) and a communication system. In this paper, we propose a distributed control methodology to control DSDs based on the measurement from the local node only and using the sensitivity of nodal voltage to power injection. Each DSD decides on phase swapping if it rectifies the unbalance index of the local node. We show that decreasing the Voltage Unbalance Factor (VUF) of individual nodes will improve the unbalance situation of the whole feeder. The proposed scheme does not require a communication system nor a central controller. The result of simulations confirms the efficacy of the proposed methodology. [ABSTRACT FROM AUTHOR]

VSC-HVDC systems are being increasingly employed in the power systems. The recently installed HVDC systems have a power capacity similar to traditional power plants. Hence, they are expected to have a similar behaviour as traditional synchronous generators during faults in AC grid, within their limits of course. Recent grid codes require HVDC converter stations to incorporate fault ride-through (FRT) capabilities in order to avoid HVDC converter station disconnection from AC grid for certain fault characteristics. In this paper, two FRT mechanisms are suggested for the two converter stations of an HVDC system. One FRT mechanism is added to the DC voltage control loop of the master converter station, while the other FRT mechanism is added to the active power control loop of the slave converter station. The objective is to ensure the stable operation of the HVDC system during faults that may occur in AC grids located on both sides of the HVDC system. The performance and stability of the suggested FRT mechanisms are tested considering the pre-fault power flow direction and all possible types of balanced and unbalanced faults. Simulation results confirm the effectiveness of the FRT mechanisms and revealed the critical modes during FRT operation. [ABSTRACT FROM AUTHOR]

Personalized venues recommendation is essential to help people find attractive venue to visit as growth of location-based social networks. Existing approaches never distinguish user individual interests from her social preferences, which leads to a bottleneck of modeling user check-in behaviors accurately. In this paper, we find the differences between user interests and her social preferences clearly and investigate the time law of user check-in behaviors in depth. Consequently, we propose a social-period-aware topic model (SPATM) to learn the influence weights of both user interests and her social preferences on making-decision for each check-in time automatically. Especially, we model latent topic by leveraging smaller size of dynamic activities instead of static categories, which can alleviate the data sparsity problem by using more co-occurrent activities information. Moreover, our approach can automatically judge whether a user’s social preference is periodic or aperiodic and learn the periodicity of periodic one. Furthermore, the Alias Sampling based training approach is introduced to improve sampling efficiency. The results demonstrate our proposed model is effective and outperforms the state-of-the-art approaches in terms of effectiveness and efficiency. Besides, SPATM can learn semantically coherent latent topics and geographically dispersed latent social topics which are useful to explain recommendation. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surfaces (RISs) and cell-free (CF) massive multiple-input multiple-output (MIMO) are two promising technologies for realizing beyond-fifth generation (5G) networks. In this paper, we study the uplink spectral efficiency (SE) of a practical spatially correlated RISs-aided CF massive MIMO system over Rician fading channels. Specifically, we derive the closed-form expression for characterizing the uplink SE of the system, which shows that increasing the number of RIS elements can improve the system performance. Moreover, the results unveil that the spatial correlation of RIS has a significant impact on the system while leading to the best performance gain at a half wavelength spacing. Finally, the accuracy of our analytical results are verified by Monte-Carlo simulations. [ABSTRACT FROM AUTHOR]

Channel estimation is one of the main challenges for implementing reconfigurable intelligent surface (RIS)-aided communication system with a large number of antennas at the base station (BS) because RIS is equipped with many passive reflective elements without active transmitting/receiving and signal processing abilities. In this paper, we focus on the channel estimation in a general RIS-aided multi-user mmWave communication system. Specifically, a novel two-phase channel estimation scheme consisting of on-line and off-line phases is proposed to estimate the BS-RIS channel, RIS-user channel, and BS-user channel, respectively. Inspired by the characteristics of few scatterers in mmWave communication systems, the antenna domain channels are converted into the virtual angular domain channels by using the discrete Fourier transform (DFT) matrix. Thus, the estimation problem can be formulated as a compressed sensing (CS) problem, and solved by using efficient vector approximate message passing (VAMP) algorithm with expectation-maximization (EM) to learn unknown parameters and obtain the estimates simultaneously. Simulation results show that, the above algorithm with two choices of prior distributions in the proposed mmWave RIS-aided multi-user system has fast convergence speed and desirable estimation performance. [ABSTRACT FROM AUTHOR]

Free viewpoint videos (FVVs) provide immersive experiences for end-users, and they have been applied in many applications, such as movies, sports, and TV shows. However, the development of quantifying the quality of experience (QoE) of FVVs is still relatively slow due to the high costs of data collection and limited public databases. In this paper, we conduct a comprehensive study on FVV QoE. First, we construct the largest, to the best of our knowledge, FVV QoE database called Youku-FVV from two complex real scenarios, i. e., entertainment and sports. Specifically, Youku-FVV originates from the videos captured by dozens of real cameras arranged annularly. We use these videos to generate virtual viewpoints, which make up FVVs together with real views. In constructing the FVV QoE database, we consider both internal and external influencing factors of QoE, which correspond to FVV generation and playback, respectively. Besides, we make an initial attempt to train an efficient no reference FVV QoE prediction model using this database, where several sparse frame sampling strategies are validated. And we demonstrate the feasibility of striving for the balance between effectiveness and efficiency of FVV QoE prediction. The proposed FVV QoE database and source codes are publicly available at https://github.com/QTJiebin/FVV_QoE [ABSTRACT FROM AUTHOR]

Controlling several joints simultaneously is a common feature of natural arm movements. Robotic prostheses shall offer this possibility to their wearer. Yet, existing approaches to control a robotic upper-limb prosthesis from myoelectric interfaces do not satisfactorily respond to this need: standard methods provide sequential joint-by-joint motion control only; advanced pattern recognition-based approaches allow the control of a limited subset of synchronized multi-joint movements and remain complex to set up. In this paper, we exploit a control method of an upper-limb prosthesis based on body motion measurement called Compensations Cancellation Control (CCC). It offers a straightforward simultaneous control of the intermediate joints, namely the wrist and the elbow. Four transhumeral amputated participants performed the Refined Rolyan Clothespin Test with an experimental prosthesis alternatively running CCC and conventional joint-by-joint myoelectric control. Task performance, joint motions, body compensations and cognitive load were assessed. This experiment shows that CCC restores simultaneity between prosthetic joints while maintaining the level of performance of conventional myoelectric control (used on a daily basis by three participants), without increasing compensatory motions nor cognitive load. [ABSTRACT FROM AUTHOR]

Due to the forecasted fast increasing cellular traffic and the already highly congested licensed spectrum, it is critical to exploit and utilize the unlicensed spectrum resources for the fifth-generation (5G) and beyond networks. A challenging problem is the coexistence of 5G and other networks with fair, reliable, and efficient sharing of the unlicensed spectrum. In this paper, we propose a blockchain-enhanced distributed spectrum sharing scheme for coexisting multiple operators and multiple WiFi APs. We design a novel lightweight and efficient consensus mechanism, named Proof of Strategy (PoG). In this consensus mechanism, the problem of spectrum sharing is used as a consensus puzzle, and the part of the unlicensed spectrum is used as the ‘fee’ of miners. With such a design, the computing overhead of the consensus process is expected to be reduced significantly. We develop a non-cooperative game to analyze the behavior of the miners and obtain a symmetric Bayesian Nash equilibrium under the uniform distribution of mining cost estimation. It can be found mathematically and experimentally that the strategy of the winner tends to maximize the system revenue by sharing the unlicensed spectrum resource. Furthermore, to reduce the impact of heavy interactions on system throughput, the operation of WiFi APs in the proposed scheme can be adaptively switched between ‘contention mode’ and ‘blockchain mode’ according to the network traffic load. The dynamic behavior is constructed as an evolutionary game, and the existence and uniqueness of equilibrium points are proved by theoretical analysis. Simulations demonstrated the fairness and effectiveness of the proposed blockchain-based scheme and the mode switching method for distributed spectrum sharing by heterogeneous wireless networks. [ABSTRACT FROM AUTHOR]

The use of the emerging hybrid analog-digital structure for future millimeter-wave communications has attracted much attention. Although this structure can reduce the power consumption considerably, the spatial covariance matrix (SCM), as the core of subspace-based direction of arrival (DOA) estimation algorithms, cannot be obtained directly. The beam sweeping algorithm (BSA) was proposed for SCM reconstruction from compressed measurements. However, the BSA is computationally intensive owing to the high-dimensional matrix-to-matrix multiplication and matrix inversion. To address this issue, a BSA algorithm with high accuracy and low computational-cost using the submatrix multiplication (BSASM) is proposed in this paper. By appropriately adjusting the weight, which consists of a switch and a phase shifter, connected to each antenna, the SCM can be accurately reconstructed with low-dimensional matrix-to-vector multiplication and 2-dimensional matrix inversion, thus reducing the computational-cost significantly. After SCM reconstruction, various DOA estimation algorithms can be exploited to obtain the DOA information. Simulation experiments are conducted to verify the performance of the proposed algorithm. The results indicate that using a substantially lower computational-cost, BSASM can reconstruct SCM more accurately than BSA. [ABSTRACT FROM AUTHOR]

In this paper, we present two new families of APN functions. The first family is in bivariate form $\big (x^{3}+xy^{2}+ y^{3}+xy, x^{5}+x^{4}y+y^{5}+xy+x^{2}y^{2} \big)\,\,\vphantom {_{\int _{\int }}}$ over ${\mathbb F}_{2^{m}}^{2}$. It is obtained by adding certain terms of the form $\sum _{i}(a_{i}x^{2^{i}}y^{2^{i}},b_{i}x^{2^{i}}y^{2^{i}})$ to a family of APN functions recently proposed by Gölo&gcaron;lu. The $\vphantom {_{\int _{\int }}}$ second family has the form $L(z)^{2^{m}+1}+vz^{2^{m}+1}$ over ${\mathbb F}_{{2^{3m}}}$ , which generalizes a family of APN functions by Bracken et al. from 2011. By calculating the $\Gamma $ -rank of the constructed APN functions over ${\mathbb F}_{2^{8}}$ and ${\mathbb F}_{2^{9}}$ , we demonstrate that the two families are CCZ-inequivalent to all known families. In addition, the two new families cover two known sporadic APN instances over ${\mathbb F}_{2^{8}}$ and ${\mathbb F}_{2^{9}}$ , which were found by Edel and Pott in 2009 and by Beierle and Leander in 2021, respectively. [ABSTRACT FROM AUTHOR]

This paper presents a dual-hysteresis band control method for multi-drive systems based on a nine-switch inverter. The drive system contains two independent three-phase induction motors fed by a nine-switch inverter. Independent control of torque, speed, and stator current of two load stages is achieved. The proposed strategy offers a reliable control operation of both induction machines under individual load profiles. Instead of using independent sets of three-phase voltage source converters, the nine-switch inverter is used to drive separate machines. Thus, the volume and size of the power stage are noticeably reduced due to the use of fewer semiconductors. The theoretical concept and design steps of the proposed method are presented. The performance of the closed-loop independent motor control scheme is experimentally validated using a 3.2 kW lab-scaled nine-switch inverter prototype and Altera Cyclone IV Field-programmable gate array. [ABSTRACT FROM AUTHOR]

Consistent distribution of shadows on the surface of the shaded PV array enhances the array’s harvested capacity. Therefore, in this paper, an Image processing inspired Chaos Map reconfiguration is proposed to mitigate the effect of shading. The proposed reconfiguration is aimed at achieving uniform row current when compared with the other conventional configurations with physical relocation of panels without changing the electrical connections. The efficacy of the proposed method is tested on Short Wide, Short Narrow, Long Wide and Long Narrow shading conditions on the basis of both software and hardware results. The proposed method enhanced output metrics under partially shaded conditions and gives most effective dispersion of shading over entire PV array. This proposed method is also compared with other existing static reconfiguration techniques for the above said shading conditions and the results show tremendous increment in output power under both hardware and software platforms. The results replicate that the proposed configuration can be generalized for any size of an SPV Array and output parameters can be enhanced by physical relocation under any sort of shading conditions. [ABSTRACT FROM AUTHOR]

The main challenges for Finite Set-model Predictive Torque and Flux Control (MPTC) include huge calculation amount, large torque ripple, and the selection of weighting factor. To deal with these challenges and achieve the fastest torque response, a novel MPTC strategy with virtual voltage vector-based pattern is proposed in this paper. In each control period, a desired voltage vector is computed based on the maximum torque variation rate. The virtual desired voltage vector is combined by using basic voltage vectors with the minimum switching times. The switching pattern between two adjacent control periods is optimized by using a cost function in realtime. Compared with the traditional MPTC approach, the novel strategy has multifaceted improved performances: faster torque response, less calculation amount, lower switching frequency, reduced torque ripple, higher efficiency and no weighting factor. The proposed method is contrasted with traditional MPTC method and a well-known generalized multiple-vector-based MPC method via experiments. [ABSTRACT FROM AUTHOR]

Modern-day graph workloads operate on huge graphs through pointer chasing which leads to high last-level cache (LLC) miss rates and limited memory-level parallelism (MLP). Simultaneous Multi-Threading (SMT) effectively hides the memory access latencies for multi-threaded graph workloads provided that sufficient threads are supported in hardware. Unfortunately, providing a sufficiently large number of physical threads incurs an unjustifiably high hardware cost for commodity SMT processors which typically implement only two physical hardware threads. Ideally, we would like to achieve aggressive-SMT performance when running graph workloads on modest commodity processors. In this paper, we propose Virtualized Multi-Threading (VMT), a low-overhead multi-threading paradigm for accelerating graph workloads on commodity processors. Unlike prior multi-threading paradigms, VMT virtualizes both the physical hardware threads and the architecture state: VMT maps a large number of logical software threads to a small number of physical hardware threads, while maintaining the architecture state of the logical threads in the processor's cache hierarchy. Implemented on top of a quad-core 2-way SMT processor, VMT achieves an average speedup of 1.74× for a set of representative graph workloads, while incurring minimal hardware cost (195 bytes per core to support up to 32 logical threads). VMT's low hardware cost paves the way for implementation in commodity processors. [ABSTRACT FROM AUTHOR]

A multi-level boost topology based on a flying capacitor is compared in this work with the hybrid, multi-level, partial power processing topology already presented in the literature for use as a highly efficient and compact dc/dc stage in 1500-V, two-stage, grid-connected PV systems. Different variations of the resonant stage of the hybrid topology are analyzed and compared in terms of losses, volume and complexity. Full multivariable optimization is conducted for the multi-level boost topology with different number of levels and for all the analyzed variations of the resonant stage of the hybrid topology. Appropriately rated new classes of 650-V and 900-V WBG devices are included in the optimization algorithm. It is concluded that due to the dominant conduction losses and gap in the voltage rating of the commercially available WBG devices between 650V and 200V, increase of the number of levels over 4 leads to the deteriorated loss and volume performances. All the analysis related to the resonant stage of the hybrid topology is confirmed by detailed and comprehensive measurements of two prototypes of 4kW of nominal and 7kW of maximal power. Additionally, all the loss models applied in the optimization algorithms presented in this paper are confirmed by detailed measurements, thermal calibration and finite element thermal simulations of the wide bandgap devices and inductor designs employed in this work. [ABSTRACT FROM AUTHOR]

Since the wide application of virtual synchronous generators (VSGs), the power grid faces great challenges in the safe and stable operation due to their limited thermal capacity and weak anti-disturbance ability. During transient period, for example, a fault occurs in the transmission line, the VSG may lose the transient angle stability and provoke the current hard limit. Even if the fault is cleared by tripping of line, it still faces the problem of instability and voltage dips. To address this problem, in this paper, the post-fault large-signal model of VSG is derived first via the travelling waves based fault information acquisition. Subsequently, with the effect of both active and reactive power loops taken into account, a two-stage simultaneous control scheme is proposed for improving the transient stability of VSG, while considering the current limitation during fault state and voltage support after fault clearance. This method is fulfilled by mode switching and an additional feedback control based on the fault signal. Finally, the effectiveness of the proposed method under both symmetrical and asymmetrical faults is verified. Moreover, the application of the proposed method in a multiple VSGs system is also verified. Besides, the robustness to parameter mismatch and the feasible operating region for the method are discussed. [ABSTRACT FROM AUTHOR]

The synchronization requirement is a bottleneck of many distributed optimization algorithms, particularly for solving problems with computationally heterogeneous subproblems and during the occurrence of communication failure/delay. This paper presents a double-loop learning-aided asynchronous alternating direction method of multipliers (LA-ADMM) that has information prediction capability and handles a considerable level of asynchrony between subproblems. A momentum-extrapolation prediction-correction technique is developed to enable subproblems to predict their neighbors missing shared variable information instead of using the latest received values. An online streaming-based anomaly classification is designed to observe the performance of predicted data and control Lagrange multipliers update over the course of iterations. The proposed LA-ADMM reduces under-utilization of computation resources, especially if subproblems are computationally heterogeneous. This algorithm also enhances distributed optimization robustness against communication failure/delay that may result in a considerable level of asynchrony between subproblems. LA-ADMM is applied to solve the optimal power flow problem for several test systems. Promising results are obtained as compared to the classical synchronous ADMM and asynchronous ADMM without the anomaly switch control. [ABSTRACT FROM AUTHOR]

This paper proposes an aggregation method for proliferated small-size data networks to apply data networks’ spatial load regulation potentials for demand response (DR). First, each data network is modeled as a virtual power network, where the Internet data center load is modeled as a set of linear constraints. Second, an aggregated virtual power network (AVPN) is proposed to demonstrate the aggregation method potentials in power systems and to emulate DR applications for multiple virtual power networks in wholesale markets. The coupling of AVPN and power network would develop a linear load model for an aggregated Internet data center. Furthermore, the supply curves representing AVPN DR are formulated to capture heterogeneous regulation costs of virtual power networks, which guarantees limited welfare losses in AVPN DR compared with the individual DR of virtual power networks. Last, an AVPN DR implementation mechanism is deduced to reveal the potentials of the aggregation method in power system applications. Simulation results verify the efficiency of the proposed aggregation method for spatially-coupled DR resources, where, the computing time of the AVPN-based OPF without welfare loss is reduced by 99.94% when there are 3×104 data networks. The proposed aggregation strategy implies that the proliferation of small-size data networks will offer a reasonable DR for enhancing the power system operation in wholesale electricity markets. [ABSTRACT FROM AUTHOR]

High-performance multicast-enabled packet forwarding engines (PFEs), as an essential component of high-end switches, use a polynomial-time membership query algorithm to determine which port(s) the data packet should be forwarded. The currently widely used query algorithm is Bloom Filter (BF), which has been proven to have many fatal flaws. Another error-free membership query algorithm includes Scalar-pair Vectors Routing Forwarding (SVRF), Fractional-N Scalar-pair Vectors Routing Forwarding (Frac-N SVRF), and the Per-Port Prime Filter Array (P3FA) also have some shortcomings in space and time efficiencies. In this paper, we proposed a hybrid strategy: Divaricate Heterogeneous SVRF (DH-SVRF) scheme, which based on the P3FA and Frac-N SVRF, which randomly divides all member ships into N groups, and each group has the same structure and is independent of each other to obtain higher time efficiency and space utilization. Finally, we also discussed the selection of the optimal egress-diversity threshold. Through mathematical modeling and simulation, we validate that the proposed DH-SVRF scheme is superior to the SVRF/Frac-N SVRF and traditional BF in terms of scalability, space utilization, and time efficiency in specific conditions such as appropriate egress-diversity thresholds. [ABSTRACT FROM AUTHOR]

The aim of this article is to develop a new cooperative path following control scheme for a team of autonomous underwater vehicles (AUVs) which track one curve with nonlinear uncertainties. Individual path-following controllers are designed to guarantee that each AUV meets the desired tracking performance. For the cooperative path following, a containment control approach is incorporated into the design, where each AUV is forced to evenly disperse on a path that is parameterized by a continuous variable over a communication network. The main features of the paper that unlike the existing designs are that: first, by employing the command filtered control technique, the assumption of second-order derivative of the reference path is removed. Second, a globally uniformly ultimately bounded (GUUB) path following control structure is proposed that enables two kinds of controllers to switch under different cases. Third, coordination between multiple AUVs is achieved through a containment design, and a path variable containment cooperative path following controller is derived that enables multiple AUVs to be evenly dispersed and guided by the virtual leaders. Finally, the stability analysis and simulation example are given to verify the proposed control strategy. [ABSTRACT FROM AUTHOR]

The ITER magnet system will operate in extremely severe conditions, which impose high requirements for mechanical and dielectric strength of the electrical insulation of the superconductive coils. Only monolithic structure obtained during the VPI procedure is capable to provide the required mechanical and dielectric strength for electrical insulation. To provide the qualitative insulation, a temperature non-uniformity of the electrical insulation should be kept within the range of [−5, +5 °C] and [−0, +20 °C] during filling with epoxy compound and its curing, respectively. The PF1 coil is about 150 t in weight and consists of materials with different thermal conductivity. Besides, a complicated geometry of the coil adds complexity to VPI. Since the VPI is usually a long-term and irreversible process (within pot life of compound), the whole process should be controllable. The paper describes the developed calculation model of the ITER PF1 coil and presents the results of numerical simulation of this model at VPI of electrical insulation. The completed VPI of the ITER PF1 coil has verified the proposed method for coil heating and proved an acceptable agreement between the calculated and measured temperature distributions throughout the VPI procedure. [ABSTRACT FROM AUTHOR]