Search

Background: Phospholipids (PLs) are major constituents of cell membranes, play important roles in cell proliferation and death, as well as in signal transduction, and therefore are relevant biomarkers for different pathologies. On the other hand, when the analysis of small compounds, such as therapeutics in blood is desired, then phospholipids are part of the matrix and cause serious interference during analysis. Currently, both the analysis and removal of PLs from biological samples are limited by extensive sample preparation and instrumental separation., Results: A fast and simple quantitative Ti 4+ -modified paper spray tandem mass spectrometric (TiPS-MS/MS) method was established in urine, where the enrichment of phospholipids was achieved, as well as reduction of matrix effects (primarily caused by high salt content) that ultimately led to improved sensitivity and selectivity. The method could achieve a physiologically relevant limit of detection (0.01-0.03 μg mL -1 ). Also, the usefulness of the Ti 4+ -modified paper was investigated in the opposite mode, namely for the selective removal of phospholipids from matrices such as plasma. Clonidine is used as model compound, as the detection of this compound is known to suffer from ion suppression by phospholipids. Compared with blank paper spray tandem mass spectrometry, the limit of detection could be improved from 0.3 μg mL -1 to 0.03 μg mL -1 by employing a Ti 4+ -modified paper on top of the spray tip to capture phospholipids from the sample., Significance and Novelty: A novel Ti 4+ -modified paper was developed to allow for rapid solid-phase extraction of phospholipids from urine or selective removal from plasma, followed by direct paper spray mass spectrometric detection as a fast and convenient sample preparation and analysis combination. The paper properties are based on the Ti 4+ metal ion, which can selectively bind phosphate-containing compounds under acidic conditions, and its applicability was demonstrated in relevant biological matrices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Anti-obesity drugs, used to suppress appetite and reduce fat absorption, have been circulated and traded illegally worldwide. The traditional methods of liquid chromatography tandem mass spectrometry (LC-MS/MS) and gas chromatography-mass spectrometry (GC-MS) for analyzing these drugs in in vivo samples require complex sample pretreatment and time-consuming procedures. To address this issue, a thermal-assisted paper spray mass spectrometry (PS-MS) method was developed in this study to analyze anti-obesity drugs in raw urine. By incorporating a heat source and optimizing the spray solvent and paper substrate, this technique demonstrates reduced matrix effect and higher sensitivity compared to traditional PS-MS methodology for direct analysis of anti-obesity drugs in urine samples. A temperature range of 100-200 °C can be set for screening anti-obesity drugs in urine samples, with the flexibility to adjust the temperature according to the specific drug being analyzed. The limits of detection (LODs) for these 15 anti-obesity drugs in urine ranged between 1 and 500 ng mL -1 . Furthermore, the thermal-assisted PS-MS method exhibited good linearities ( R 2 , 0.9903-0.9997) within the range from 10-100 to 1000 ng mL -1 for the direct quantitation of anti-obesity drugs in urine samples with an internal standard. Therefore, the thermal-assisted PS-MS technique may provide a novel approach for the direct analysis of drugs in complex samples.

Current procedures for the assessment of chronic wound infection are time-consuming and require complex instruments and trained personnel. The incidence of chronic wounds worldwide, and the associated economic burden, urge for simple and cheap point-of-care testing (PoCT) devices for fast on-site diagnosis to enable appropriate early treatment. The enzyme myeloperoxidase (MPO), whose activity in infected wounds is about ten times higher than in non-infected wounds, appears to be a suitable biomarker for wound infection diagnosis. Herein, we develop a single-component foldable paper-based device for the detection of MPO in wound fluids. The analyte detection is achieved in two steps: (i) selective immunocapture of MPO, and (ii) reaction of a specific dye with the captured MPO, yielding a purple color with increasing intensity as a function of the MPO activity in infected wounds in the range of 20-85 U/mL. Ex vivo experiments with wound fluids validated the analytic efficiency of the paper-based device, and the results strongly correlate with a spectrophotometric assay.

The prevalence of fentanyl abuse raises global public health concerns with an unprecedented surge in overdose deaths. Rapid identification and quantification of fentanyl in biofluids is of paramount importance to combat fentanyl abuse for law enforcement agencies and promptly treat patients for medical professionals. Herein, a freestanding surface-enhanced Raman spectroscopy (SERS) biosensor with excellent condensing enrichment capability, termed FrEnSERS biosensor, is reported for quantitative label-free detection of trace fentanyl in biofluids. This biosensor comprises a reduced graphene oxide membrane decorated with high-density hydrophobic Au nanostars. A combination of the high SERS enhancement and the focusing effect for analyte enrichment of the hydrophobic surface accounts for the remarkable SERS performance of the FrEnSERS biosensor. We demonstrate that the FrEnSERS biosensor achieves the sensitive and quantitative detection of fentanyl in both serum and urine over a wide dynamic range spanning more than 4 orders of magnitude, with a limit of detection of 0.47 ng/mL for serum samples and 0.73 ng/mL for urine samples. Our biosensor is sensitive, cost-effective, and reliable for rapid quantitative analysis of fentanyl in biofluids with great promise for forensic analysis and clinical diagnosis.

Three-dimensional (3D) dried blood spheroids formed on hydrophobic paper are a new microsampling platform that can stabilize labile molecules in whole blood stored in ambient air at room temperature. In this study, we define the ideal conditions for preparing the dried blood spheroids. The physical morphology of 3D dried blood spheroids is found to be largely impacted by the unregulated relative humidity of the surrounding environment. A solution of KOH placed in an enclosed chamber offers a facile way to control humidity. We also report a general polymer coating strategy that serves to stabilize dried biofluids when prepared under ordinary ambient conditions without regulation of humidity. Dried blood spheroids coated in xanthan gum polymer exhibited enhanced chemical and physical stability. The same xanthan gum polymer provided chemical stability for 2D dried blood spots when compared with the conventional noncoated samples. We have expanded the application of xanthan gum to less viscous biofluids such as urine to induce an artificial protective barrier that also provides enhanced stability for labile performance-enhancing drugs stored at room temperature. The impact of polymer coating on direct biofluid analysis via paper spray mass spectrometry was determined by comparing the relative ionization efficiency, percent difference of ionization efficiency, and matrix effects of performance-enhancing drugs that were spiked in undiluted raw urine. Acceptable analytical performance was recorded for all three criteria, including high ionization efficiencies that ranged from 77 to 93% in the presence of the xanthan gum polymer.

Chloride (Cl - ) is an inorganic anion present in a broad range of samples (e.g. biological, environmental, food, water, etc.), the determination of which is of widespread significance. In this work, we translate the well-established traditional argentometric method (Mohr's precipitation titration) into a small, simple, portable, and low-cost paper-based microfluidic diagnostic device, which provides rapid and quantitative analysis. The developed device enables the determination of chloride sample volumes as small as 5 μL. A distance-based detection method is implemented providing fully instrument-free quantitation. The beneficial effects of channel geometry (variable widths with constant heights) on analytical parameters were investigated. Trapezoidal channels (channel width changes linearly with height) were used to create a gradient of paper surface (titrant) available for the reaction, compared to the typical uniform rectangular channels (constant channel width). The trapezoid with increasing width offered higher sensitivity and lower detection limits (i.e. 0.05 mM vs 0.1 mM from the rectangular channel) for chloride determination across the concentration range of 0.05-25 mM. In addition, the effect of concentration of the deposited reagent on the obtained distance signals was investigated using varying concentrations of titrant (AgNO 3 ), which allowed determination of chloride across a wider dynamic range (up to 200 mM). The utility of the paper devices was demonstrated by determination of chloride in a variety of matrices including body fluids (sweat, serum, and urine) and water samples (drinking, mineral, river water)., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Recently, the phenomenon of fentanyls overdose leading to death is emerging in an endless stream. There is an urgent requirement to quickly identify fentanyl content in body fluids for medical and judicial purposes. With this in mind, we present a paper-based SERS substrate decorated with uniform gold nanospheres treated by chloride ion for the detection of fentanyl citrate in urine and serum. In particular, the paper-based SERS sensor was prepared by liquid/liquid self-assembly technique and chloride ion was introduced to clean and modify the substrate surface, which improved the sensitivity of the solid substrate with an enhancement factor (EF) as high as 1.64 × 10 5 . Moreover, the uniformity of each paper-based substrate and the repeatability on different batches of substrate were excellent, and there was no obvious change in the intensity response of Raman spectra within a month. As a result, the quantitative analysis of fentanyl citrate in artificial urine and rat serum were performed based on the modified paper-based substrate with the limit of detection as low as 0.59 μg/mL and 2.78 μg/mL, respectively. Both the concentrations of the two biological samples with the Raman signal intensity were linearly plotted and the recovery of the spiked samples with different concentrations was collected to verify the accuracy of the quantitative curves. All the results suggest that this work makes SERS method available for the rapid identification and quantitative analysis of illicit drug in the real biological samples., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Paper spray MS is part of a cohort of ambient ionization or direct analysis methods that seek to analyze complex samples without prior sample preparation. Extraction and electrospray ionization occur directly from the paper substrate upon which a dried matrix spot is stored. Paper spray MS is capable of detecting drugs directly from dried blood, plasma and urine spots at the low ng/ml to pg/ml levels without sample preparation. No front end separation is performed, so MS/MS or high-resolution MS is required. Here, we discuss paper spray methodology, give a comprehensive literature review of the use of paper spray MS for bioanalysis, discuss technological advancements and variations on this technique and discuss some of its limitations.

Ambient electrostatic paper spray ionization from a hydrophobic paper occurs when a DC potential is applied to the dry paper triangle. Online liquid/liquid extraction of small organic compounds from a drop of biological fluid present on the dry hydrophobic paper is achieved with an organic spray solvent in under 1 min and utilizes in situ electrostatic-spray ionization for more efficient detection of extracted molecules. Direct analysis of small volumes of biofluids with no sample pretreatment is possible, which is applicable in point-of-care analyses. High sensitivity and quantitative accuracy was achieved for the direct analysis of illicit drugs in 4 μL of raw blood, serum, and whole urine. The study was extended to monitor the activity of alanine transaminase enzyme, a key biomarker for the detection of liver injury in patients (with HIV and tuberculosis) who typically take several medications at once.

We report the first demonstration of using heat on a paper device to rapidly concentrate a clinically relevant analyte of interest from a biological fluid. Our technology relies on the application of localized heat to a paper strip to evaporate off hundreds of microliters of liquid to concentrate the target analyte. This method can be used to enrich for a target analyte that is present at low concentrations within a biological fluid to enhance the sensitivity of downstream detection methods. We demonstrate our method by concentrating the tuberculosis-specific glycolipid, lipoarabinomannan (LAM), a promising urinary biomarker for the detection and diagnosis of tuberculosis. We show that the heat does not compromise the subsequent immunodetectability of LAM, and in 20 min, the tuberculosis biomarker was concentrated by nearly 20-fold in simulated urine. Our method requires only 500 mW of power, and sample flow is self-driven via capillary action. As such, our technology can be readily integrated into portable, battery-powered, instrument-free diagnostic devices intended for use in low-resource settings.

Bullous pemphigoid (BP), a common autoimmune blistering disease, is increasing in incidence and conveys a high mortality. Detection of autoantibodies targeting the noncollagenous 16A (NC16A) domain of type XVII collagen using enzyme-linked immunosorbent assay (ELISA) has demonstrated high sensitivity and specificity for diagnosing BP. We have developed a rapid, low-cost, and widely applicable ELISA-based system to detect the NC16A autoimmune antibody and then diagnose and monitor BP disease activity using a piece of filter paper, a wax-printer, and NC16A antigens. Both sera and/or blister fluids from 14 untreated BP patients were analyzed. The control group included healthy volunteers and patients with other blistering disorders such as pemphigus vulgaris. In our established paper-based ELISA (P-ELISA) system, only 2 μL of serum or blister fluid and 70 min were required to detect anti-NC16A autoimmune antibodies. The relative color intensity was significantly higher in the BP group than in the control groups when using either serum (P < 0.05) or blister fluid (P < 0.001) specimens from BP patients. The results of P- ELISA were moderately correlated with the titer of the commercial ELISA kit (MBL, Japan) (rho = 0.5680, P = 0.0011). This newly developed system allows for rapid and convenient diagnosis and/or monitoring of BP disease activity.

Because of the various matrices available for forensic investigations, the development of versatile analytical approaches allowing the simultaneous determination of drugs is challenging. The aim of this work was to assess a liquid chromatography-tandem mass spectrometry (LC-MS/MS) platform allowing the rapid quantification of colchicine in body fluids and tissues collected in the context of a fatal overdose. For this purpose, filter paper was used as a sampling support and was associated with an automated 96-well plate extraction performed by the LC autosampler itself. The developed method features a 7-min total run time including automated filter paper extraction (2 min) and chromatographic separation (5 min). The sample preparation was reduced to a minimum regardless of the matrix analyzed. This platform was fully validated for dried blood spots (DBS) in the toxic concentration range of colchicine. The DBS calibration curve was applied successfully to quantification in all other matrices (body fluids and tissues) except for bile, where an excessive matrix effect was found. The distribution of colchicine for a fatal overdose case was reported as follows: peripheral blood, 29 ng/ml; urine, 94 ng/ml; vitreous humour and cerebrospinal fluid, < 5 ng/ml; pericardial fluid, 14 ng/ml; brain, < 5 pg/mg; heart, 121 pg/mg; kidney, 245 pg/mg; and liver, 143 pg/mg. Although filter paper is usually employed for DBS, we report here the extension of this alternative sampling support to the analysis of other body fluids and tissues. The developed platform represents a rapid and versatile approach for drug determination in multiple forensic media., (Copyright © 2013 John Wiley & Sons, Ltd.)

In recent years, calcium phosphate-base composites, such as hydroxyapatite (HA) and carbonate apatite (CA) have been considered desirable and biocompatible coating layers in clinical and biomedical applications such as implants because of the high resistance of the composites. This review focuses on the effects of voltage, time and electrolytes on a calcium phosphate-base composite layer in case of pure titanium and other biomedical grade titanium alloys via the plasma electrolytic oxidation (PEO) method. Remarkably, these parameters changed the structure, morphology, pH, thickness and crystallinity of the obtained coating for various engineering and biomedical applications. Hence, the structured layer caused improvement of the biocompatibility, corrosion resistance and assignment of extra benefits for Osseo integration. The fabricated layer with a thickness range of 10 to 20 μm was evaluated for physical, chemical, mechanical and tribological characteristics via XRD, FESEM, EDS, EIS and corrosion analysis respectively, to determine the effects of the applied parameters and various electrolytes on morphology and phase transition. Moreover, it was observed that during PEO, the concentration of calcium, phosphor and titanium shifts upward, which leads to an enhanced bioactivity by altering the thickness. The results confirm that the crystallinity, thickness and contents of composite layer can be changed by applying thermal treatments. The corrosion behavior was investigated via the potentiodynamic polarization test in a body-simulated environment. Here, the optimum corrosion resistance was obtained for the coating process condition at 500 V for 15 min in Ringer solution. This review has been summarized, aiming at the further development of PEO by producing more adequate titanium-base implants along with desired mechanical and biomedical features., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The analysis of body fluids is of utmost importance in forensic casework since many biological fluids contain DNA. The ATR FT-IR spectroscopy is an emerging approach for the confirmatory, rapid, facile, non-destructive, and on-site identification and differentiation of body fluid stains. Notwithstanding the ATR FT-IR spectroscopy is showing a colossal promise towards the identification of body fluids, and further forensic enquiry related to substrate's interference is still in its infancy stage. Therefore, in the present proof-of-concept study, the ATR FT-IR spectroscopy has been utilized for the detection of vaginal fluid stains and to investigate the effect of different substrates on sample analysis. Simulated vaginal fluid samples were prepared on some selected substrates such as glass, plastic, floor tiles, polished wood, paper, and on various cloth substrates and analyzed without any prior sample preparation. Results suggested that vaginal fluid can be successfully detected on non-porous substrates, but it turned out to be a challenging task on porous substrates. However, on the basis of certain peaks, successful identification of vaginal fluid can be done directly on various case-related substrates. The best approach for the detection of vaginal fluid depends upon the nature of substrates and type of interference encountered. In addition, 10 non-vaginal fluid substances which look similar to vaginal fluid and which may lead to misclassification of vaginal fluid or can deliver false-positive results were also analyzed. The spectra of look-alike substances were classified using the chemometric tools such as PCA and PCA-LDA. The developed PCA model successfully classified all vaginal fluid samples from non-vaginal fluid substances with 100% accuracy, specificity, and sensitivity rate. In addition, the effects of other factors such as aging and mixing with other body fluids have also been studied and the results have been described.

The exploration into nanomaterial-based nonenzymatic biosensors with superb performance in terms of good sensitivity and anti-interference ability in disease marker monitoring has always attained undoubted priority in sensing systems. In this work, we report the design and synthesis of a highly active nanocatalyst, i.e., palladium and platinum nanoparticles (Pt&Pd-NPs) decorated ultrathin nanoporous gold (NPG) film, which is modified on a homemade graphene paper (GP) to develop a high-performance freestanding and flexible nanohybrid electrode. Owing to the structural characteristics the robust GP electrode substrate, and high electrochemically catalytic activities and durability of the permeable NPG support and ultrafine and high-density Pt&Pd-NPs on it, the resultant Pt&Pd-NPs–NPG/GP electrode exhibits excellent sensing performance of low detection limitation, high sensitivity and anti-interference capability, good reproducibility and long-term stability for the detection of small molecular biomarkers hydrogen peroxide (H2O2) and glucose (Glu), and has been applied to the monitoring of H2O2 in different types of live cells and Glu in body fluids such as urine and fingertip blood, which is of great significance for the clinical diagnosis and prognosis in point-of-care testing. [ABSTRACT FROM AUTHOR]

We describe techniques which we developed to study the composition and regulation of airway surface fluid (ASF). ASF from isolated equine tracheal mucosa was absorbed onto or equilibrated with small strips of ashless filter paper after timed incubations in a water-saturated, 37 degrees C environment. After expression of the fluid from the paper, constant-volume aliquots of the samples were pipetted with a microvolumetric pipette on a filmed grid, together with standards containing known concentrations for Na, Cl, K, Ca, S, and P. Analysis of the microdroplets by dispersive X-ray microanalysis on a scanning electron microscope demonstrated that ASF from "unstimulated" tracheal tissue is significantly altered compared with the Ringer solution which was used to rinse the mucosal surface before incubation, in that Na is significantly decreased (approximately 130 mM), whereas K is significantly increased (approximately 16 mM). Furthermore, when a beta-adrenergic agonist (isoproterenol 10(-4) M) was added to the serosal surface, the Na concentration significantly increased to values which approached Ringer solution (146 +/- 5.3 mM) and were significantly different compared with the Na values obtained in unstimulated tissues. In contrast, Na remained unchanged after addition of a cholinergic agonist (metacholine, 10(-4) M) to the serosal side of the tissue; however, as with beta-adrenergic stimulation, most other minor elements and especially K significantly decreased compared with their values in unstimulated tissue. These results clearly suggest that ASF composition is clearly controlled by active transport of the airway epithelium and may be influenced by neurohumoral stimulation.

[Display omitted] • Triangular silver nanoprism (AgNPrs) was synthesized using novel hydrothermal protocol. • AgNPrs was used for the identification of dopamine in human biofluids using colorimetric and spectrophotometric assay. • A novel photochemical one-drop microarray was proposed for the low-cost sensing of dopamine. Trace-level detection of Dopamine (DA) in human body fluids is crucial for diagnosing neurological disorders, understanding mental health, and advancing drug discovery, but found challenging with rapid and low-cost detection technologies. Herein, an innovative paper-based photochemical method has been developed for the detection of DA using triangular silver nanoprism (AgNPrs), as an optical nanoprobe, in human blood plasma and urine samples. The redox reaction between DA and AgNPrs was evaluated through a color change at two pHs (5.35and 6.14), which can be analyzed by UV–Vis spectrophotometry and microfluidic paper-based colorimetric device (µ PCD) with low limit of quantification of 0.01 µM. This study presents pioneering work with the potential to inspire the development of simple and effective on-site semi quantifying recognition devices for other neurotransmitters, requiring only a lightweight piece of paper and a single drop of the necessary reagent. [ABSTRACT FROM AUTHOR]

Frequent oceanic oil spill incidents and the discharge of industrial oily wastewaters have caused serious threats to environments, food chains and human beings. Lignin wastes with many reactive groups exist as the byproducts from bioethanol and pulping processing industries, and they are either discarded as wastes or directly consumed as a fuel. To make full use of lignin wastes and simultaneously deal with oily wastewaters, porous lignin-based composites have been rationally designed and prepared. In this review, recent advances in the preparation of porous lignin-based composites are summarized in terms of aerogels, sponges, foams, papers, and membranes, respectively. Then, the mechanisms and the application of porous lignin-based adsorbents and filtration materials for oil/water separation are discussed. Finally, the challenges and perspectives of porous lignin-based composites are proposed in the field of oil/water separation. The utilization of abundant lignin wastes can replace fossil resources, and meanwhile porous lignin-based composites can be used to efficiently treat with oily wastewaters. The above utilization strategy opens an avenue to the rational design and preparation of lignin wastes with high-added value, and gives a possible solution to use lignin wastes in a sustainable and environmentally friendly way., Competing Interests: Declaration of competing interest The authors declare no competing financial interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A well-developed-multiwall carbon nanotube (f-MWCNT)/biphasic calcium phosphate (BCP) composites were synthesized using ultrasonication method for orthopedic implantation applications. The formation of composites and its phase was confirmed by using X-ray diffraction. The presence of various functional groups was identified by using Fourier transform infra-red (FT-IR) spectroscopy. The presence of f-MWCNT was confirmed by Raman spectroscopy. High-resolution transmission electron microscopy (HR-TEM) analysis revealed that BCP units were bound by the surface of f-MWCNTs. The synthesized composites were coated on medical grade 316L stainless steel substrates using electro deposition technique. To determine its corrosion resistance characteristics, the developed substrates were exposed to a simulated bodily fluid (SBF) solution for 0, 4, and 7 days. These results strongly suggest that the coated composites can be utilized for bone tissue repair., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

A significant bottleneck exists for mass-production of ion-selective electrodes despite recent developments in manufacturing technologies. Here, we present a fully-automated system for large-scale production of ISEs. Three materials, including polyvinyl chloride, polyethylene terephthalate and polyimide, were used as substrates for fabricating ion-selective electrodes (ISEs) using stencil printing, screen-printing and laser engraving, respectively. We compared sensitivities of the ISEs to determine the best material for the fabrication process of the ISEs. The electrode surfaces were modified with various carbon nanomaterials including multi-walled carbon nanotubes, graphene, carbon black, and their mixed suspensions as the intermediate layer to enhance sensitivities of the electrodes. An automated 3D-printed robot was used for the drop-cast procedure during ISE fabrication to eliminate manual steps. The sensor array was optimized, and the detection limits were 10 -5  M, 10 -5  M and 10 -4  M for detection of K + , Na + and Ca 2+ ions, respectively. The sensor array integrated with a portable wireless potentiometer was used to detect K + , Na + and Ca 2+ in real urine and simulated sweat samples and results obtained were in agreement with ICP-OES with good recoveries. The developed sensing platform offers low-cost detection of electrolytes for point-of-care applications., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Abstract Body fluid biomarkers have great potential for different clinical purposes, including diagnosis, prognosis, patient stratification and treatment effect monitoring. This is exemplified by current use of several excellent biomarkers, such as the Alzheimer’s disease cerebrospinal fluid (CSF) biomarkers, anti-neuromyelitis optica antibodies and blood neurofilament light. We still, however, have a strong need for additional biomarkers and several gaps in their development and implementation should be filled. Examples of such gaps are i) limited knowledge of the causes of neurological diseases, and thus hypotheses about the best biomarkers to detect subclinical stages of these diseases; ii) the limited success translating discoveries obtained by e.g. initial mass spectrometry proteomic low-throughput studies into immunoassays for widespread clinical implementation; iii) lack of interaction among all stakeholders to optimise and adapt study designs throughout the biomarker development process to medical needs, which may change during the long period needed for biomarker development. The Society for CSF Analysis and Clinical Neurochemistry (established in 2015) has been founded as a concerted follow-up of large standardisation projects, including BIOMARKAPD and SOPHIA, and the BioMS-consortium. The main aims of the CSF society are to exchange high level international scientific experience, to facilitate the incorporation of CSF diagnostics into clinical practice and to give advice on inclusion of CSF analysis into clinical guidelines. The society has a broad scope, as its vision is that the gaps in development and implementation of biomarkers are shared among almost all neurological diseases and thus they can benefit from the activities of the society.

The homeostatic control of Sodium (Na+) ion in the human body assumes paramount relevance owing to its physiological importance. Any deviation from the normal level causes serious health problems like hypernatremia, hyponatremia, stroke, kidney problems etc. Therefore, quantification of Na+ levels in body fluids has significant diagnostic and prognostic importance. However, interfering ions like Potassium ion (K+) is the major hurdle in sodium detection. In this work, we synthesized the clusters of 3–9 nm-sized highly stable and pure Copper nanoparticles surface functionalised with curcumin, through chemical reduction method. Each cluster of particles is encapsulated in a curcumin layer which is clearly visible in TEM images. The results show that these curcumin functionalized Cu NPs (CuC) are highly selective to the colorimetric detection of Na+. The ions like K+, Mg2+ and Zn2+ did not interfere with the Na+ in this sensing technique. Low-cost paper-based sensor strips are fabricated and calibrated for the sensing of sodium in the physiological range and shade cards were developed as a calorimetric guide for estimation of Na+ which makes them ideal point of care diagnostic platform. We demonstrate that the proposed CuC paper strip can be used for detecting Na+ concentration within the whole physiological range in both blood serum and urine. [ABSTRACT FROM AUTHOR]

Background: The use of filter paper as a simple, inexpensive tool for storage and transportation of blood, ‘Dried Blood Spots’ or Guthrie cards, for diagnostic assays is well-established. In contrast, there are a paucity of diagnostic evaluations of dried cerebrospinal fluid (CSF) spots. These have potential applications in low-resource settings, such as Laos, where laboratory facilities for central nervous system (CNS) diagnostics are only available in Vientiane. In Laos, a major cause of CNS infection is Japanese encephalitis virus (JEV). We aimed to develop a dried CSF spot protocol and to evaluate its diagnostic performance using the World Health Organisation recommended anti-JEV IgM antibody capture enzyme-linked immunosorbent assay (JEV MAC-ELISA). Methodology and Principal Findings: Sample volumes, spotting techniques and filter paper type were evaluated using a CSF-substitute of anti-JEV IgM positive serum diluted in Phosphate Buffer Solution (PBS) to end-limits of detection by JEV MAC-ELISA. A conventional protocol, involving eluting one paper punch in 200μl PBS, did not detect the end-dilution, nor did multiple punches utilising diverse spotting techniques. However, pre-cut filter paper enabled saturation with five times the volume of CSF-substitute, sufficiently improving sensitivity to detect the end-dilution. The diagnostic accuracy of this optimised protocol was compared with routine, neat CSF in a pilot, retrospective study of JEV MAC-ELISA on consecutive CSF samples, collected 2009–15, from three Lao hospitals. In comparison to neat CSF, 132 CSF samples stored as dried CSF spots for one month at 25–30°C showed 81.6% (65.7–92.3 95%CI) positive agreement, 96.8% (91.0–99.3 95%CI) negative agreement, with a kappa coefficient of 0.81 (0.70–0.92 95%CI). Conclusions/Significance: The novel design of pre-cut filter paper saturated with CSF could provide a useful tool for JEV diagnostics in settings with limited laboratory access. It has the potential to improve national JEV surveillance and inform vaccination policies. The saturation of filter paper has potential use in the wider context of pathogen detection, including dried spots for detecting other analytes in CSF, and other body fluids. [ABSTRACT FROM AUTHOR]

The Curfews period of December 2015 to February 2016 in south-eastern Turkey was a time of collective violence in multiple forms, among which the Cizre Basement Massacres are the most known. The period of the general elections in June 2015, until the later and most recent attempt to carry out a military coup in July 2016, covers multiple curfews and military operations in the south-eastern regions of Turkey, and some social media material shared from the region caught international attention and provoked artistic as well as political responses. Zehra Doğan, a Kurdish journalist and artist, modified and re-shared some footage that was first posted in social media accounts of the special forces in Nusaybin and as a result was sentenced to three years in prison. She continued to produce artworks in prison, even though it was 'prohibited' for her to draw. She started to use her own body fluids, hair, newspaper, toilet paper, and any other available daily material in the prison to produce works of art. She also produced a series of work with her menstrual blood. For this article, I conducted two thematic one-to-one discussions with Zehra Doğan and studied her series of works produced with menstrual blood within the scope of mimesis and embodiment theories. Further sections of the article discuss: the function of these series of works for her acting out and working through processes of the collective political violence of which she became both a witness and a victim; methods of artistic transmission of political violence both for the artist and for the audience; and the possible ritualistic functions of using blood while producing work of arts in relation to collective political killings. [ABSTRACT FROM AUTHOR]

Competing Interests: The authors have no funding or conflicts of interest to disclose.

A novel SnO 2 quantum dots (SnO 2 QDs)-functionalized Ti 3 C 2 MXene nanocomposite was prepared via in situ synthesis method, resulting in well-regulated the nucleation and growth of SnO 2 QDs to evenly distribute onto MXene nanosheets. Ultra-small size SnO 2 QDs decorated on the surface of Ti 3 C 2 MXene nanosheets can effectively prevent the restacking of MXene and remarkably increase the electroactive surface area of the electrode, which can further increase electrocatalytic activity toward dopamine. Then, an ultrasensitive electroanalytical method based on SnO 2 QDs-functionalized Ti 3 C 2 MXene nanocomposite for dopamine monitoring was developed, and the effects of experimental condition were investigated systematically. Under optimized conditions, the prepared sensor presented a linear dependence for dopamine in the concentration range from 0.004 to 8.0 µM with the detection limit of 2.0 nM (S/N = 3). Moreover, it selectively perceived dopamine in presence of physiological interferents in urine and serum samples with excellent linearities (correlation coefficients higher than 0.9920). The relative recoveries were in the range 97.67-105.3% and 103.0-106.8%, while the limits of quantitation were 10.12 nM and 9.62 nM in urine and serum sample, respectively, demonstrating the method suitability for dopamine sensing and being envisioned as a promising candidate for neurotransmitter monitoring in biological diagnosis., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Contemporary criminal investigations are based on the statements made by the victim and the eyewitnesses. They also rely on the physical evidences found in the crime scene. These evidences, and more particularly biological ones, have a great judicial value in the courtroom. They are usually used to revoke the suspect's allegations and confirm or refute the statements made by the victim and the witnesses. Stains of body fluids are biological evidences highly sought by forensic investigators. In many criminal cases, the success of the investigation relies on the correct identification and classification of these stains. Therefore, the adoption of reliable and accurate forensic analytical methods seems to be of vital importance to attain this objective. Attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) is a modern and universal analytical technique capable of fingerprint recognition of the analyte using minimal amount of the test sample. The current systematic review aims to through light on the fundamentals of this technique and to illustrate its wide range of applications in forensic investigations. ATR-FTIR is a nondestructive technique which has demonstrated an exceptional efficiency in detecting, identifying and discriminating between stains of various types of body fluids usually encountered in crime scenes. The ATR-FTIR spectral data generated from bloodstains can be used to deduce a wealth of information related to the donor species, age, gender, and race. These data can also be exploited to discriminate between stains of different types of bloods including menstrual and peripheral bloods. In addition, ATR-FTIR has a great utility in the postmortem investigations. More particularly, in estimating the postmortem interval and diagnosing death caused by extreme weather conditions. It is also useful in diagnosing some ambiguous death causes such as fatal anaphylactic shock and diabetic ketoacidosis., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Cancer is one of the leading causes of death worldwide producing an estimated cost of $161.2 billion in the US in 2017 only. Early detection of cancer can not only reduce cancer mortality rates but also dramatically reduce healthcare costs given that the 17 million new cancer cases in 2018 are estimated to grow 27.5 million new cases by 2040. Analytical devices based upon paper substrates can provide effective, rapid, and extremely low‐cost alternatives for early cancer detection compared to existing testing methods. However, low concentrations of biomarkers in body fluids as well as the possible association of any given biomarker with multiple diseases remains one of the greatest challenges to widespread adoption of these paper‐based devices. Fortunately, recent advances have opened the possibility of detecting multiple biomarkers within the same device, which can be predictive of a patient's condition with unprecedented cost‐effectiveness. Accordingly, this review highlights the recent advancements in paper‐based analytical devices with a multiplexing focus. The primary areas of interest include lateral flow assay and microfluidic paper‐based assay formats, signal amplification approaches to enhance the sensitivity for a specific cancer type, along with current challenges and future outlook for the detection of multiple cancer biomarkers. [ABSTRACT FROM AUTHOR]

Paper-based biofuel cells have the potential to serve as health monitoring devices for urinary glucose and volume by incorporating the fabricated electrodes into nursing diapers. In this study, we evaluate the output power and stability of a biofuel cell by combining 3D impedance measurement and admittance analysis. The 3D impedance-based analysis method can simultaneously detect changes in the overall electrode structure of the enzyme electrode and in the quantity of active enzymes and mediators on the electrode surface. The biofuel cell electrodes were fabricated via screen-printing, using polydimethylglycidyl (poly-GMA)- modified MgO-templated carbon (GMgOC) or poly-GMA-unmodified MgO-templated carbon (NMgOC). The enzymes used were flavin adenine dinucleotide-dependent glucose dehydrogenase and bilirubin oxidase, with Azure-A serving as the mediator. Admittance analysis was utilized to measure the enzyme activity and estimate the charge transfer resistance by extrapolating the spectra obtained through admittance analysis. The charge transfer resistances of both electrodes exhibited a greater stability for the GMgOC electrode. This can be attributed to the covalent immobilization of the enzyme and mediator on the electrode facilitated by GMgOC, effectively suppressing enzyme and mediator elution. The electric double-layer capacitance values of both electrodes indicated the overall stability of the electrode structure during the measurement. [ABSTRACT FROM AUTHOR]

Saliva is a common body fluid with significant forensic value used to investigate criminal cases such as murder and assault. In the past, saliva identification often relied on the α-amylase test; however, this method has low specificity and is prone to false positives. Accordingly, forensic researchers have been working to find new specific molecular markers to refine the current saliva identification approach. At present, research on immunological methods, mRNA, microRNA, circRNA, and DNA methylation is still in the exploratory stage, and the application of these markers still has various limitations. It has been established that salivary microorganisms exhibit good specificity and stability. In this study, 16S rDNA sequencing technology was used to sequence the V3-V4 hypervariable regions in saliva samples from five regions to reveal the role of regional location on the heterogeneity in microbial profile information in saliva. Although the relative abundance of salivary flora was affected to a certain extent by geographical factors, the salivary flora of each sample was still dominated by Streptococcus, Neisseria, and Rothia. In addition, the microbial community in the saliva samples in this study was significantly different from that in the vaginal secretions, semen, and skin samples reported in our previous studies. Accordingly, saliva can be distinguished from the other three body fluids and tissues. Moreover, we established a prediction model based on the random forest algorithm that could distinguish saliva between different regions at the genus level even though the model has a certain probability of misjudgment which needs more in-depth research. Overall, the microbial community information in saliva stains might have prospects for potential application in body fluid identification and biogeographic inference., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The two basic research tools developed to measure tissue fluid pressure (wick catheter) and osmotic pressure (colloid osmometer) have undergone extensive validation and refinement over the past 20 years. Using these techniques, basic science investigations were undertaken of edema in Amazon reptiles, pressure-volume relations in animals and plants, adaptive physiology of Antarctic penguins and fishes, edema in spawning salmon, tissue fluid balance in humans under normal conditions and during simulated weightlessness, and orthostatic adaptation in a mammal with high and variable blood pressures--the giraffe. Following and sometimes paralleling this basic research have been several clinical applications related to use of our colloid osmometer and wick technique. Applications of the osmometer have included insights into (a) reduced osmotic pressure of sickle-cell hemoglobin with deoxygenation and (b) reduced swelling pressure of human nucleus pulposus with hydration or certain enzymes. Clinical uses of the wick technique have included (a) improvement of diagnosis and treatment of acute and chronic compartment syndromes, (b) elucidation of tissue pressure thresholds for neuromuscular dysfunction, and (c) development of a better tourniquet design for orthopaedics. This article demonstrates that basic research tools open up areas of basic, applied, and clinical research.

The transition period is very stressful for primiparous cows due to their first calving experience and will be more challenging if it occurs under heat stress conditions. Heat stress reduces the feed intake of dairy cows. Therefore, it reduces the consumption of minerals and vitamins. Oral administration of boluses through the provision of mineral-vitamin compounds can reduce metabolic abnormalities after calving. The present study aimed to evaluate effect of sustained-release bolus on body condition score (BCS) change, serum metabolites, uterine health, and reproductive status in primiparous cows. Heifers were selected at the beginning of the close-up period (n = 60, BCS = 3.35 ± 0.12). There were 2 experimental treatments at the time of calving: (1) heifers without bolus oral administration (H - Bo, n = 30); (2) heifers with bolus oral administration (H + Bo, n = 30). The results showed that although the rate of BCS loss was lower in the group receiving bolus, the effect of bolus was not significant. The effect of bolus on blood level of glucose, non-esterified fatty acids (NEFA), and beta-hydroxybutyrate (BHBA) was not significant; however, the highest concentration of albumin (P = 0.05) was observed in the H + Bo group on day 42 after calving. The concentration of aspartate transaminase (AST) tended to increase (P = 0.06) on day 14 after calving and entire the study. Total antioxidant capacity (TAC) was affected (P < 0.05) by bolus throughout the period of study, and the highest (P < 0.05) concentration of glutathione peroxidase (GPX) and superoxide dismutase (SOD) was observed in H + Bo group on day 42 after calving. The H + Bo group had the lowest (P < 0.05) vaginal discharge score (VDS). In general, oral administration of the sustained-release bolus in heifers significantly affected the antioxidant factors and uterine health, as well as had positive effects on liver function, body condition, and reproduction status., (© 2023. The Author(s), under exclusive licence to Springer Nature B.V.)

A common technique to sample airway mucosal 'surface' liquids is with absorbing discs of filter paper. The present study examined the efficacy of this technique by analysing tracheal liquids of control and capsaicin (0.1 nmol)-exposed guinea-pig airways. Mucosal fluids, obtained by topically applied discs or by a specific lavage procedure, and tracheal tissue were sampled. The animals had received FITC-dextran (MW 70 kDa) intravenously and this specific plasma tracer was analysed in the sampled material. Under control conditions significantly more FITC-dextran was found in the discs than in the tracheal lavage fluids (P less than 0.001) despite the fact that the lavaged mucosal surface was much larger than that covered by the discs. Capsaicin significantly increased the content of FITC-dextran in all fluids sampled as well as in the airway tissue. In all cases concentrations of FITC-dextran in the disc fluids did not differ much from that in the tissue samples. These data suggest that absorbing discs severely disturb the epithelial-barrier function and sample subepithelial fluid and solutes including macromolecules. As demonstrated in this study by the elevated content of a plasma tracer molecule an inflammatory process may, nevertheless, be traced in the mixture of surface and tissue fluids that is sampled by the discs.

Practical screening tools and ultrasensitive technologies can play pivotal roles in precision cancer profiling for early diagnosis at asymptomatic stages, as well as for monitoring prognosis, risk stratification, and disease recurrence. While a number of sensors and diagnostic tools continue to be developed for ultrasensitive detection and off-site analysis, there has been an increasing interest in point-of-care devices, particularly those that are mechanically flexible and potentially wearable by the patient. In this chapter, we present a critical insight into the integrated engineering approaches involved in such flexible systems. We consider various aspects in the design of flexible devices, the biomarkers of interest, and the different transduction mechanisms by which mechanically flexible devices can be used in the area of cancer monitoring. We then discuss the different types of flexible biosensing platforms that have been developed to date, including wearables on skin and on clothing, and exhaled breath and implantable sensors. Finally, we discuss the design challenges and future outlook in the development of flexible platforms that can provide comprehensive cancer biomarker panels for patients and clinicians., (© 2022. The Author(s), under exclusive license to Springer Nature Switzerland AG.)

Over the past decades, paper-based lateral flow immunoassays (LFIAs) have been extensively developed for rapid, facile, and low-cost detection of a wide array of target analytes in a point-of-care manner. Conventional home pregnancy tests are the most significant example of LFAs, which detect elevated concentrations of human chorionic gonadotrophin (hCG) in body fluids to identify early pregnancy. In this work, we have upgraded these platforms to a higher version by developing a customized microfluidic paper-based analytical device (μPAD), as the new generation of paper-based point-of-care platforms, for colorimetric immunosensing. This will offer a cost-efficient and environmentally friendly alternative platform for paper-based immunosensing, eliminating the need for nitrocellulose (NC) membrane as the substrate material. The performance of the developed platform is demonstrated by detection of hCG (as a model case) in urine samples and subsequently indicating positive or negative pregnancy. A dual-functional silane-based composite was used to treat filter paper in order to enhance the colorimetric signal intensity in the detection zones of μPADs. In addition, microfluidic pathways were designed in a manner to provide the desired regulated fluid flow, generating sufficient incubation time (delays) at the designated detection zones, and consequently enhancing the obtained signal intensity. The presented approaches allow to overcome the existing limitations of μPADs in immunosensing and will broaden their applicability to a wider range of assays. Although, the application of the developed hCG μPAD assay is mainly in qualitative (i.e., positive or negative) detection of pregnancy, the semi-quantitative measurement of hCG was also investigated, indicating the viability of this assay for sensitive detection of the target hCG analyte within the related physiological range (i.e., 10–500 ng/mL) with a LOD value down to 10 ng/mL. [ABSTRACT FROM AUTHOR]

Abstract: Cellulose hydrolysis is the rate-limiting step in anaerobic digestion. In the present study, waste paper was used as a model of cellulosic biomass and was pretreated with rumen fluid prior to methane production. To achieve a high methane yield, the reaction time of the pretreatment was examined. Waste paper was soaked with rumen fluid for 6 and 24h at 37°C. Various volatile fatty acids, especially acetate, were produced by the pretreatment. Semicontinuous methane production was carried out over a 20-day period. The best daily methane yield was obtained by the 6-h pretreatment. The amount was 2.6 times higher than that of untreated paper, which resulted in 73.4% of the theoretical methane yield. During methane production, the cellulose, hemicellulose and lignin degradabilities were improved by the pretreatment. Pretreatment by rumen fluid is therefore a powerful method to accelerate the methane yield from a cellulosic biomass. [Copyright &y& Elsevier]

6-Thioguanine is an immunosuppressive drug, an analogue of guanine, applied to treat acute leukemia and inflammatory bowel disease. Excessive use of 6-thioguanine during clinical treatment may cause side effects. Moreover, providing a dose too low will be ineffective. Therefore, there is a critical need for a rapid, selective and routine approach to quantifying 6-thioguanine in body fluids to support a clinical application. A fully validated HPLC method has been developed to determine 6-thioguanine in whole blood samples using 5-bromouracil as an internal standard. 6-Thioguanine nucleotides were released from erythrocytes by perchloric acid, and then hydrolysed at 100 °C to the parent thiopurine, 6-thioguanine. The following validation parameters of the method were determined: specificity/selectivity, linearity range (479-17,118 ng/mL, R > 0.992), limits of detection (150 ng/mL) and quantification (479 ng/mL), accuracy (- 5.6 < Bias < 14.7), repeatability (CV 1.30-3.24%), intermediate precision (CV 4.19-5.78%), extraction recovery (79.1-103.6%) and carryover. Furthermore, the stability of the drug in whole blood samples under various storage conditions was investigated. The suggested method is suitable for determining 6-thioguanine in whole blood erythrocyte samples for drug level monitoring, thus correct dosing., (© 2023. Springer Nature Limited.)

Human body fluids contain biomarkers which are used extensively for prognostication, diagnosis, monitoring, and evaluation of different treatments for a variety of diseases and disorders. The application of biosensors based on cell-free protein synthesis (CFPS) offers numerous advantages including on-demand and at-home use for fast, accurate detection of a variety of biomarkers in human fluids at an affordable price. However, current CFPS-based biosensors use commercial RNase inhibitors to inhibit different RNases present in human fluids and this reagent is approximately 90% of the expense of these biosensors. Here the flexible nature of Escherichia coli-lysate-based CFPS was used for the first time to produce murine RNase Inhibitor (m-RI) and to optimize its soluble and active production by tuning reaction temperature, reaction time, reduced potential, and addition of GroEL/ES folding chaperons. Furthermore, RNase inhibition activity of m-RI with the highest activity and stability was determined against increasing amounts of three human fluids of serum, saliva, and urine (0%-100% v/v) in lyophilized CFPS reactions. To further demonstrate the utility of the CFPS-produced m-RI, a lyophilized saliva-based glutamine biosensor was demonstrated to effectively work with saliva samples. Overall, the use of CFPS-produced m-RI reduces the total reagent costs of CFPS-based biosensors used in human body fluids approximately 90%., (© 2021 Wiley Periodicals LLC.)

Simultaneous detection of multiple tumor biomarkers in body fluids could facilitate early diagnosis of lung cancer, so as to provide scientific reference for clinical treatment. This paper depicted a multi-parameter paper-based electrochemical aptasensor for simultaneous detection of carcinoembryonic antigen (CEA) and neuron-specific enolase (NSE) in a clinical sample with high sensitivity and specificity. The paper-based device was fabricated through wax printing and screen-printing, which enabled functions of sample filtration and sample auto injection. Amino functional graphene (NG)-Thionin (THI)- gold nanoparticles (AuNPs) and Prussian blue (PB)- poly (3,4- ethylenedioxythiophene) (PEDOT)- AuNPs nanocomposites were synthesized respectively. They were used to modify the working electrodes not only for promoting the electron transfer rate, but also for immobilization of the CEA and NSE aptamers. A label-free electrochemical method was adopted, enabling a rapid simple point-of-care testing. Experimental results showed that the proposed multi-parameter aptasensor exhibited good linearity in ranges of 0.01–500 ng mL−1 for CEA (R2 = 0.989) and 0.05–500 ng mL−1 for NSE (R2 = 0.944), respectively. The limit of detection (LOD) was 2 pg mL−1 for CEA and 10 pg mL−1 for NSE. In addition, the device was evaluated using clinical serum samples and received a good correlation with large electrochemical luminescence (ECL) equipment, which would offer a new platform for early cancer diagnostics, especially in those resource-limit areas. • The aptasensor could enable simultaneous detection of two tumor markers in a single sample with high sensitivity. • The aptasensor had a fast response time as a label-free electrochemical detection method was adopted. • The aptasensor was fabricated by wax printing and screen-printing, which could be mass-produced easily with low cost. [ABSTRACT FROM AUTHOR]