Search

Bitter gourds were dried under varied drying conditions in a microwave assisted fluidized bed dryer, and the process was optimized using response surface methodology. Microwave power, temperature and air velocity were used as process variables for drying and the process parameters were varied between 360 and 720 W, 40–60 °C and 10–14 m/s, respectively. The responses determined for deciding the optimal criteria were vitamin C, total phenolics, IC50, total chlorophyll content, vitamin A content, rehydration ratio, hardness and total color change of the dried bitter gourd. Statistical analyses were done by using response surface methodology, which showed that independent variables affected the responses to a varied extent. The optimum drying conditions of 550.89 W microwave power, 55.87 °C temperature, and 13.52 m/s air velocity were established for microwave assisted fluidized bed drying to obtain highest desirability for the dried bitter gourd. At optimum conditions, validation experiment was done to ensure the suitability of models. Temperature and drying time plays an important role in the deterioration of bioactive components. Faster and shorter heating led to the greater retention of bioactive components. Taking the aforesaid results into consideration, our study recommended MAFBD as a promising technique with minimum changes in quality attributes of bitter gourd.

Taro rhizomes are a rich source of polysaccharides, including starch and mucilage. However, mucilage has excellent anti-microbial efficacy, and unique gel-forming and techno-functional properties. Therefore, this study aimed to extract and utilize taro mucilage (TM), which is viscous and has a gel-like texture, for the shelf-life enhancement of fresh-cut brinjals (eggplants). Mucilage was extracted using hot-water extraction and the yield was calculated to be 6.25 ± 0.87% on a dry basis. Different formulations of coating gel solutions were prepared: 1, 2, 3, 4, 5, 6, and 7%. The selection of the coating gel solution was carried out based on particle size. The smallest particle size was observed in treatment T5 (154 ± 0.81 nm) and zeta potential −27.22 ± 0.75 mV. Furthermore, cut brinjals were coated with the prepared mucilage gel solution and this showed a significant effect on the overall physicochemical properties of cut brinjals. Maximum weight loss occurred on the 10th day (12.67 ± 0.24%), as compared with coated brinjals (8.99 ± 0.42%). Minor changes were observed in pH, for the control sample significantly decreased from 4.58 ± 0.45 to 2.99 ± 0.75 on the 0th day to the 10th day, respectively. Titrable acidity of coated and uncoated cut brinjals was found to be at 0.31 ± 0.44% on the 0th day, which increased up to 0.66 ± 0.20% for the control and 0.55 ± 0.68% for coated brinjals on the 10th day. The taro mucilage coating gel (TMCG) solution showed pseudo-plastic behavior or shear-thinning fluid behavior. FTIR data confirmed the existence of several functional groups including various sugars, proteins, and hydroxylic groups. Antioxidant activity of coated and uncoated cut brinjals was found to be 22.33 ± 0.37% and 22.15 ± 0.49%, respectively. The TMCG solution showed effective results towards the various food pathogenic microorganisms. Overall, it is a natural, renewable resource that is biodegradable. This makes it an environmentally friendly alternative to synthetic additives or thickeners. It is cost effective, easily available, eco-friendly, and non-toxic. This can be an attractive feature for consumers looking for sustainable and eco-friendly options.

The processing industry discards avocado seeds, which increases production and ultimately pollutes the environment. It would be advantageous to handle these waste by-products both economically and environmentally. Avocado seeds are rich in polysaccharides, proteins, lipids, vitamins, minerals, and other bioactive substances. The nutritional and phytochemical composition of avocado seeds has been well studied and discussed.Avocado-seed extracts also have many health-related bioactive properties, such as anti-hyperglycaemic, anticancer, anti-hypercholesterolemia, antioxidant, anti-inflammatory, and anti-neurogenerative effects are clearly demonstrated how these properties can be used to formulate or fortify food. The health-promoting properties of avocado seeds have been studied. These properties are attributed to various phytochemicals, such as acetogenin, catechin, epicatechin, procyanidin B1, estragole, etc. Additionally, items made from valorized avocado seeds that people can consume have been explored. The best applications of valorized by-products have been created for the pharmaceutical, functional food, and nutraceutical sectors while considering quality and safety. More clinical testing and product development research are required to prove the effectiveness of avocado seeds.

Naturally occurring phytochemicals with promising biological properties are quercetin and its derivatives. Quercetin has been thoroughly studied for its antidiabetic, antibacterial, anti-inflammatory, anti-Alzheimer's, anti-arthritic, antioxidant, cardiovascular, and wound-healing properties. Anticancer activity of quercetin against cancer cell lines has also recently been revealed. The majority of the Western diet contains quercetin and its derivatives, therefore consuming them as part of a meal or as a food supplement may be sufficient for people to take advantage of their preventive effects. Bioavailability-based drug-delivery systems of quercetin have been heavily studied. Fruits, seeds, vegetables, bracken fern, coffee, tea, and other plants all contain quercetin, as do natural colors. One naturally occurring antioxidant is quercetin, whose anticancer effects have been discussed in detail. It has several properties that could make it an effective anti-cancer agent. Numerous researches have shown that quercetin plays a substantial part in the suppression of cancer cells in the breast, colon, prostate, ovary, endometrial, and lung tumors. The current study includes a concise explanation of quercetin's action mechanism and potential health applications.

Various types of natural fiber-rich ingredients are added into bakery-based products to improve their fiber content for health promotional purposes. But the majority of these products usually include exotic dietary fiber components. The aim of this study was to develop biscuits incorporated with wheat bran, rice bran and banana peel powder and to evaluate the effects on physicochemical properties and sensory acceptability of these different biscuit samples. Wheat bran, rice bran and banana peel powder was used to substitute refined wheat flour in biscuit samples at different levels (0, 5, 10, 15, 20, 25, and 30%). The effect of wheat bran, rice bran and banana peel powder incorporation on proximate composition, physical characteristics, texture profile, color and sensory evaluation of biscuit samples were investigated. The moisture content of the product showed a significant (p ≤ 0.01) decreasing trend while as protein showed increasing trend with increasing level of incorporation of wheat bran, rice bran and banana peel powder. Also there was a considerable effect on L*(darkness to lightness), a*(greeness to redness), and b*(blueness to yellowness) values of biscuit samples. Among the physical parameters diameter and thickness decreased non-significantly (p ≤ 0.01) with the addition of different fibers whereas spread ratio and weight increases. Sensory attributes showed a significant (p ≤ 0.01) increasing trend with an increase in the level of incorporation of different fibers. Based on sensory evaluation biscuits prepared with 15% wheat bran, 15% rice bran, and 10% banana peel powder were rated best. The biscuits were packed in high density polyethylene (HDPE) boxes and were analyzed on different intervals viz. 0, 30, and 60th day. In samples of optimized biscuits, the ash content, protein, fat and color exhibited a non- significant tendency of declining over storage. It was discovered that the ash content dropped from0.86 to 0.67% in Wb4, 0.95 to 0.75% in Rb4, and 1.15to 0.92% in Bpp3. However there was a considerable increase in moisture content during storage.

Although both ultraviolet (UV) radiation and ultrasound (US) treatment have their capabilities in microbial inactivation, applying any one method alone may require a high dose for complete inactivation, which may affect the sensory and nutritional properties of pineapple juice. Hence, this study was intended to analyse and optimise the effect of combined US and UV treatments on microbial inactivation without affecting the selected quality parameters of pineapple juice. US treatment (33 kHz) was done at three different time intervals, viz. 10 min, 20 min and 30 min., after which, juice samples were subjected to UV treatment for 10 min at three UV dosage levels, viz. 1 J/cm2, 1.3 J/cm2, and 1.6 J/cm2. The samples were evaluated for total colour difference, pH, total soluble solids (TSS), titrable acidity (TA), and ascorbic acid content; total bacterial count and total yeast count; and the standardization of process parameters was done using Response Surface Methodology and Artificial Neural Network. The results showed that the individual, as well as combined treatments, did not significantly impact the physicochemical properties while retaining the quality characteristics. It was observed that combined treatment resulted in 5 log cycle reduction in bacterial and yeast populations while the individual treatment failed. From the optimization studies, it was found that combined US and UV treatments with 22.95 min and1.577 J/cm2 ensured a microbiologically safe product while retaining organoleptic quality close to that of fresh juice.

The qualitative and quantitative evaluation of agricultural products has often been carried out using traditional, i.e., destructive, techniques. Due to their inherent disadvantages, non-destructive methods that use near-infrared spectroscopy (NIRS) coupled with chemometrics could be useful for evaluating various agricultural products. Advancements in computational power, machine learning, regression models, artificial neural networks (ANN), and other predictive tools have made their way into NIRS, improving its potential to be a feasible alternative to destructive measurements. Moreover, the incorporation of suitable preprocessing techniques and wavelength selection methods has arguably proven its practical feasibility. This review focuses on the various computation methods used for processing the spectral data collected and discusses the potential applications of NIRS for evaluating the quality and safety of agricultural products. The challenges associated with this technology are also discussed, as well as potential future perspectives. We conclude that NIRS is a potentially useful tool for the rapid assessment of the quality and safety of agricultural products.

Hypercholesterolemia is one of the major causes of cardiovascular ailments. The study has been conducted on the hypothesis that hypercholesterolemia can be modulated by microencapsulated curcumin due to its enhanced bioavailability. In this context, curcumin obtained from fresh rhizomes of Curcuma longa by conventional (CSE) and supercritical fluid (SFE) extractions, has been successfully microencapsulated using a mixture of gelatin and maltodextrin. The microencapsulated curcumin CSE&SFE, has been added as supplemented diet and has been resulted in maximum plasma concentration of curcumin at 100 min as 529.31 ± 8.73 and 405.23 ± 7.12 μg/mL, respectively compared to non-encapsulated turmeric powder used as control. During the bio evaluation trial, turmeric powder (3%), microencapsulated curcuminCSE (1%) and microencapsulated curcuminSFE (0.5%) were provided to designate rat groups categorized by normal; N1, N2, and N3 and hypercholesterolemic; H1, H2, and H3 conditions, respectively. The incorporation of microencapsulated curcuminSFE in the supplemented diet caused a reduction in serum cholesterol, low density lipoprotein (LDL) and triglycerides, athrogenic index (AI) and cardiac risk ration (CRR) as 5.42 and 12.81%, 7.25 and 15.42%, 3.17 and 9.38%, 15.38 and 29.28%, and 10.98 19.38% in normo- and hypercholesterolemic rat groups. Additionally, high-density lipoprotein (HDL) and anti-atherogenic index (AAI) indicated a significant increase in all treated rat groups. Conclusively, the inclusion of turmeric and curcumin microencapsulates in the dietary module has been proven effective to alleviate hyperlipidemia. Therefore, the present study is proven that curcumin absorption via the gastrointestinal tract and its stability toward metabolization in the body increased via microencapsulation using maltodextrin and gelatin. Microencapsulated curcumin reaches the target site via oral administration because of sufficient gastrointestinal residence period and stability in the digestive tract.

The human gut possesses millions of microbes that define a complex microbial community. The gut microbiota has been characterized as a vital organ forming its multidirectional connecting axis with other organs. This gut microbiota axis is responsible for host-microbe interactions and works by communicating with the neural, endocrinal, humoral, immunological, and metabolic pathways. The human gut microorganisms (mostly non-pathogenic) have symbiotic host relationships and are usually associated with the host’s immunity to defend against pathogenic invasion. The dysbiosis of the gut microbiota is therefore linked to various human diseases, such as anxiety, depression, hypertension, cardiovascular diseases, obesity, diabetes, inflammatory bowel disease, and cancer. The mechanism leading to the disease development has a crucial correlation with gut microbiota, metabolic products, and host immune response in humans. The understanding of mechanisms over gut microbiota exerts its positive or harmful impacts remains largely undefined. However, many recent clinical studies conducted worldwide are demonstrating the relation of specific microbial species and eubiosis in health and disease. A comprehensive understanding of gut microbiota interactions, its role in health and disease, and recent updates on the subject are the striking topics of the current review. We have also addressed the daunting challenges that must be brought under control to maintain health and treat diseases.

Food intake and body weight regulation are of special interest for meeting today's lifestyle essential requirements. Since balanced energy intake and expenditure are crucial for healthy living, high levels of energy intake are associated with obesity. Hence, regulation of energy intake occurs through short- and long-term signals as complex central and peripheral physiological signals control food intake. This work aims to explore and compile the main factors influencing satiating efficiency of foods by updating recent knowledge to point out new perspectives on the potential drivers of satiety interfering with food intake regulation. Human internal factors such as genetics, gender, age, nutritional status, gastrointestinal satiety signals, gut enzymes, gastric emptying rate, gut microbiota, individual behavioral response to foods, sleep and circadian rhythms are likely to be important in determining satiety. Besides, the external factors (environmental and behavioral) impacting satiety efficiency are highlighted. Based on mechanisms related to food consumption and dietary patterns several physical, physiological, and psychological factors affect satiety or satiation. A complex network of endocrine and neuroendocrine mechanisms controls the satiety pathways. In response to food intake and other behavioral cues, gut signals enable endocrine systems to target the brain. Intestinal and gastric signals interact with neural pathways in the central nervous system to halt eating or induce satiety. Moreover, complex food composition and structures result in considerable variation in satiety responses for different food groups. A better understanding of foods and factors impacting the efficiency of satiety could be helpful in making smart food choices and dietary recommendations for a healthy lifestyle based on updated scientific evidence.

Many studies have demonstrated the use of synthetic preservatives and chemical additives in food is causing poisoning, cancer, and other degenerative disorders. New solutions for food preservation with quality maintenance are currently emerging. As a result, public concern has grown, as they desire to eat healthier products that use natural preservatives and compounds rather than synthetic ones. Clove is a highly prized spice used as a food preservative and for a variety of therapeutic reasons. Clove essential oil and its principal active component, eugenol, indicate antibacterial and antifungal action, aromaticity, and safety as promising and valuable antiseptics in the food sector. Clove essential oil and eugenol are found to have strong inhibition effects on a variety of food-source bacteria, and the mechanisms are linked to lowering migration and adhesion, as well as blocking the creation of biofilm and various virulence factors. This review emphasizes the importance of CEO (clove essential oil) in the food industry and how it can be explored with edible coatings to deliver its functional properties in food preservation.

Food supplementation formulations refer to products that are designed to provide additional nutrients to the diet. Vitamins, dietary fibers, minerals and other functional compounds (such as antioxidants) are concentrated in dietary supplements. Specific amounts of dietary compounds are given to the body through food supplements, and these include as well so-called non-essential compounds such as secondary plant bioactive components or microbial natural products in addition to nutrients in the narrower sense. A significant social challenge represents how to moderately use the natural resources in light of the growing world population. In terms of economic production of (especially natural) bioactive molecules, ways of white biotechnology production with various microorganisms have recently been intensively explored. In the current review other relevant dietary supplements and natural substances (e.g., vitamins, amino acids, antioxidants) used in production of dietary supplements formulations and their microbial natural production via fermentative biotechnological approaches are briefly reviewed. Biotechnology plays a crucial role in optimizing fermentation conditions to maximize the yield and quality of the target compounds. Advantages of microbial production include the ability to use renewable feedstocks, high production yields, and the potential for cost-effective large-scale production. Additionally, it can be more environmentally friendly compared to chemical synthesis, as it reduces the reliance on petrochemicals and minimizes waste generation. Educating consumers about the benefits, safety, and production methods of microbial products in general is crucial. Providing clear and accurate information about the science behind microbial production can help address any concerns or misconceptions consumers may have.

Cotton stalk, a waste product in agriculture, serves as a beneficial, low-cost material as a medium for microbial synthesis of lactic acid as desired for polylactic acid synthesis. Cotton stalk was used as a substrate for microbial lactic acid synthesis, and a novel strain of Lactococcus cremoris was reported to synthesize 51.4 g/L lactic acid using cellulose recovered from the cotton stalk. In total, 18 Lactobacillus isolates were isolated from kitchen waste, soil, sugarcane waste, and raw milk samples screened for maximum lactic acid production. It was found that one of the Lactococcus cremoris isolates was found to synthesize maximum lactic acid at a concentration of 51.4 g/L lactic acid in the hydrolysate prepared from cotton stalk. The upstream process parameters included 10% inoculum size, hydrolysate containing reducing sugars 74.23 g/L, temperature 37 °C, agitation 220 rpm, production age 24 h. Only the racemic (50:50) mixture of D-LA and L-LA (i.e., D/L-LA) is produced during the chemical synthesis of lactic acid, which is undesirable for the food, beverage, pharmaceutical, and biomedical industries because only the L-form is digestible and is not suitable for biopolymer, i.e., PLA-based industry where high optically purified lactic acid is required. Furthermore, polylactic acid was synthesized through direct polycondensation methods using various catalysts such as chitosan, YSZ, and Sb2O3. PLA is biocompatible and biodegradable in nature (its blends and biocomposites), supporting a low-carbon and circular bioeconomy.

The growing consumer awareness of climate change and the resulting food sustainability issues have led to an increasing adoption of several emerging food trends. Some of these trends have been strengthened by the emergence of the fourth industrial revolution (or Industry 4.0), and its innovations and technologies that have fundamentally reshaped and transformed current strategies and prospects for food production and consumption patterns. In this review a general overview of the industrial revolutions through a food perspective will be provided. Then, the current knowledge base regarding consumer acceptance of eight traditional animal-proteins alternatives (e.g., plant-based foods and insects) and more recent trends (e.g., cell-cultured meat and 3D-printed foods) will be updated. A special focus will be given to the impact of digital technologies and other food Industry 4.0 innovations on the shift toward greener, healthier, and more sustainable diets. Emerging food trends have promising potential to promote nutritious and sustainable alternatives to animal-based products. This literature narrative review showed that plant-based foods are the largest portion of alternative proteins but intensive research is being done with other sources (notably the insects and cell-cultured animal products). Recent technological advances are likely to have significant roles in enhancing sensory and nutritional properties, improving consumer perception of these emerging foods. Thus, consumer acceptance and consumption of new foods are predicted to continue growing, although more effort should be made to make these food products more convenient, nutritious, and affordable, and to market them to consumers positively emphasizing their safety and benefits.

The overall objective of Stance4Health EU H2020 project is to develop Stance4Health will develop a complete Smart Personalised Nutrition (SPN) service in an interdisciplinary approach through the exchange of knowledge and methods of different disciplines (i.e. nutrition food sciences, nutrition-health sciences, consumer science-social anthropology-psychology, economics and computer sciences, among others) via shared knowledge-interactions. Based on the use of mobile technologies as well as tailored food production that will optimize the gut microbiota activity and long-term consumer engagement. Stance4Health will also increase the health status and well-being of individuals by adopting a longlasting healthy and sustainable dietary behaviour. A huge innovation capacity will be enhanced by creating new market opportunities and bringing other important benefits to the European society from the Circular Economy and the Digitisiting European Industry Focus Areas.

Despite the fact that researchers have been working on the preservation of raw milk at room temperature for several decades, most of the processes are limited to the use of chemical preservatives. One of the major problems of raw milk self-life is its spoilage at ambient temperature during the summer season. Therefore, in the present study, research has been conducted to control raw milk spoilage at 4 °C and 35 °C (considered in different regions’ ambient temperatures). ε-Polylysine, a natural preservative approved for food use, was isolated from the fermentation broth of Bacillus licheniformis PL26 grown in an M3G medium, and its antimicrobial preservation properties for milk applications were tested. The raw milk samples containing 0.02% w/v ε-polylysine could be stored at 4 °C for up to 16 days without spoilage, however, raw milk samples without ε-polylysine as preservative spoiled on the 8th day even at 4 °C refrigeration conditions. Raw milk containing 0.02% ε-polylysine in combination with 0.2% sodium bicarbonate (added to avoid acidification) could be stored at ambient temperature (35 °C) for up to 48 h. The changes in milk composition, especially of the casein, lactose, and fat stability, during storage under different conditions with/without ε-polylysine, were studied as well. The present study proves that ε-polylysine can be successfully used as a new biopreservative. Therefore, for the dairy industry, a natural preservative to store milk at room temperature during the summer season, replacing synthetic preservatives derived from renewable sources, can be proposed. Once again, marine bacteria seem to be one of the promising sustainable and renewable sources of biologically active compounds such as new food biopreservatives

Lotus seed starch was cross-linked using sodium trimetaphosphate (STMP) in varying amounts (1, 3, and 5%), and its rheological, pasting, thermal, and physicochemical properties were investigated. These cross-linked lotus seed starches (CL-LS-1, CL-LS-3, CL-LS-5) were also used to produce films (CL-LSFs), which were then examined for their mechanical characteristics, water vapor permeability, moisture content, opacity, thickness, and water solubility. After cross-linking, the solubility, amylose content, and swelling power of all the starch samples decreased. Cross-linking resulted in an increased pasting temperature, while peak viscosity (PV) decreased, with CL-LS-5 exhibiting the lowest peak viscosity (1640.22 MPa·s). In comparison to native starch, the thermal characteristics of CL-LS demonstrated greater gelatinization temperatures (To, Tp, Tc) and gelatinization enthalpy (ΔHgel). The gelatinization enthalpy of CL-LS varied between 152.70 and 214.16 J/g, while for native LS the value was 177.91 J/g. Lower moisture content, water solubility, and water vapor permeability were observed in the CL-LSFs. However, the cross-linking modification did not produce much effect on the film thickness. The highest tensile strength (12.52 MPa) and lowest elongation at break (26.11%) were found in CL-LSF-5. Thus, the starch films’ barrier and mechanical qualities were enhanced by cross-linking.

FUNGUSCHAIN project is implementing valorisation concepts of mushroom (Agaricus Bisporus) agricultural residues. Therefore, novel cascading approaches will be designed, in order to obtain innovative procedures to receive high value bio-based additives (antioxidants, antimicrobials and proteins), bioplasticizers by lipid conversion as well as biopolymers production from polysaccharides (glucans and fermentable sugars), using the remaining side streams and substrates. Final remaining substrates still being used by composting and/ or biogas synthesis, closing the agricultural cycle accordingly. The demonstration within a new biorefinery, including economical extraction methods, will attempt the industrial viability. At the end of the project, more than 65% of the emerged mushroom by-products/ waste will be valorised into high-value additives. Three key chains within European economy, namely, food, cleaning/cosmetic and plastic market will characterise and further validate the applicability of the obtained products within their production processes under compliance with legal EU and market requirements.

The EXCornsEED project combines science, chemistry, biology, engineering and biotechnology tools and knowledge, to develop and validate an integrated process of innovative and highly sustainable extraction/ purification and concentration technologies being integrated in bio-refineries’ side streams in order to recover, characterise and prepare proteins and other bio-active compounds (i.e. peptides, polyphenols, amino acids, fibres, lipid compounds) as ingredients for food, specialty chemicals and cosmetic market. The approach will be upscaled from lab level (few grams, TRL3) up to industrial pilot level (1t/d capacity, TRL5) considering EU strategies for a bio-based economy to transform traditional bioethanol production into future biorefinery concept as well as circular economy, in order to maximize the utilization of industrial by-products.

The deactivation of degrading and pectinolytic enzymes is crucial in the fruit juice industry. In commercial fruit juice production, a variety of approaches are applied to inactivate degradative enzymes. One of the most extensively utilized traditional procedures for improving the general acceptability of juice is thermal heat treatment. The utilization of a non-thermal pulsed electric field (PEF) as a promising technology for retaining the fresh-like qualities of juice by efficiently inactivating enzymes and bacteria will be discussed in this review. Induced structural alteration provides for energy savings, reduced raw material waste, and the development of new products. PEF alters the α-helix conformation and changes the active site of enzymes. Furthermore, PEF-treated juices restore enzymatic activity during storage due to either partial enzyme inactivation or the presence of PEF-resistant isozymes. The increase in activity sites caused by structural changes causes the enzymes to be hyperactivated. PEF pretreatments or their combination with other nonthermal techniques improve enzyme activation. For endogenous enzyme inactivation, a clean-label hurdle technology based on PEF and mild temperature could be utilized instead of harsh heat treatments. Furthermore, by substituting or combining conventional pasteurization with PEF technology for improved preservation of both fruit and vegetable juices, PEF technology has enormous economic potential. PEF treatment has advantages not only in terms of product quality but also in terms of manufacturing. Extending the shelf life simplifies production planning and broadens the product range significantly. Supermarkets can be served from the warehouse by increasing storage stability. As storage stability improves, set-up and cleaning durations decrease, and flexibility increases, with only minor product adjustments required throughout the manufacturing process.

The accumulation of high amounts of petro-based plastics is a growing environmental devastation issue, leading to the urgent need to innovate eco-safe packaging materials at an equivalent cost to save the environment. Among different substitutes, starch-based types and their blends with biopolymers are considered an innovative and smart material alternative for petrol-based polymers because of their abundance, low cost, biodegradability, high biocompatibility, and better-quality film-forming and improved mechanical characteristics. Furthermore, starch is a valuable, sustainable food packaging material. The rising and growing importance of designing starch-based films from various sources for sustainable food packaging purposes is ongoing research. Research on “starch food packaging” is still at the beginning, based on the few studies published in the last decade in Web of Science. Additionally, the functionality of starch-based biodegradable substances is technically a challenge. It can be improved by starch modification, blending starch with other biopolymers or additives, and using novel preparation techniques. Starch-based films have been applied to packaging various foods, such as fruits and vegetables, bakery goods, and meat, indicating good prospects for commercial utilization. The current review will give a critical snapshot of starch-based films’ properties and potential applicability in the sustainable smart (active and intelligent) new packaging concepts and discuss new challenges and opportunities for starch bio composites.

The circular economy action plan involves principles related to food waste reduction and integration of recovered nutrients to the market. In this context, the present study aims to highlight the valuable bioactive components found in tomato processing by-products (carotenoids, phenolic compounds and fatty acids) influenced by industrial pre-treatments, particularly cold break (CB) process at 65–75 °C and hot break (HB) process at 85–95 °C. The fatty acid profile of the tomato seed oil was examined by gas chromatography coupled to mass spectrometry (GC-MS), individual carotenoid and phenolic compositions were determined by high performance liquid chromatography (HPLC) and the viscoelastic properties were evaluated by rheological measurements. The physicochemical properties revealed appropriate characteristics of the tomato seed oil to fit the standards of generally accepted edible oils, for both CB and HB derived samples, however, significant qualitative and quantitative differences were detected in their phenolic composition and carotenoids content. Lycopene (37.43 ± 1.01 mg/100 mL) was a major carotenoid in the examined samples, linoleic acid was the main fatty acid (61.73%) detected in the tomato seed oil and syringic acid appeared to be one of two major phenolic acids detected in the samples of CB process. Our findings extend the boundaries of tomato processing industry by validating that tomato seed oil is a bioactive rich edible oil with additional health benefits, which can be integrated in functional food products.

Nowadays, many boar reproduction researches are directed to improve extenders and to increase cold shock protection of semen. Little research is focused on the influence of egg yolk combined with alternative cold shock protective media. Egg yolk could interfere with other compounds present in the extender composition. The influence of egg yolk addition was assessed in boar sperm cells, cooled at 5ºC, to elucidate its effect on motility and membrane integrity. Flow Cytometry and Computer Assisted Semen Analysis (CASA) were used to determine the rate of sperm with intact plasma and acrosomal membrane, respectively the sperm cells motility. Statistical analyses (T-Test) were performed using GraphPad Prism version 5.00. Androhep Plus supplemented with 20% egg yolk (AhPlus+20%EY) indicated a higher cold shock protection in progressive motility (93.9±2.64%) and membrane integrity (79.78±4.14%), rather than the extender without egg yolk (p0.05). The combination egg yolk-AhPlus seems to be an alternative to standard extenders, conferring stability in boar sperm cells against cold shock.