Search

Suspensions in cylinder machine essentially adapted for providing more uniform webs are formed by adding 0.10 to 1.88 weight percent of a water soluble acrylamide polymer having, molecular in excess of 3, 000, 000 and a percent hydrolysis not in excess of 30 percent to an aqueous suspension containing cellulose fiber.

Selective manipulation of micrometric objects in a standard microscopy environment is possible with miniaturized acoustical tweezers., Acoustical tweezers based on focalized acoustical vortices hold the promise of precise contactless manipulation of millimeter down to submicrometer particles, microorganisms, and cells with unprecedented combined selectivity and trapping force. Yet, the widespread dissemination of this technology has been hindered by severe limitations of current systems in terms of performance and/or miniaturization and integrability. Here, we unleash the potential of focalized acoustical vortices by developing the first flat, compact, paired single electrode focalized acoustical tweezers. These tweezers rely on spiraling transducers obtained by folding a spherical acoustical vortex on a flat piezoelectric substrate. We demonstrate the ability of these tweezers to grab and displace micrometric objects in a standard microfluidic environment with unique selectivity. The simplicity of this system and its scalability to higher frequencies open tremendous perspectives in microbiology, microrobotics, and microscopy.

Gelatin based adhesives have been used in the last decades in different biomedical applications due to the excellent biocompatibility, easy processability, transparency, non-toxicity, and reasonable mechanical properties to mimic the extracellular matrix (ECM). Gelatin adhesives can be easily tuned to gain different viscoelastic and mechanical properties that facilitate its ocular application. We herein grafted glycidyl methacrylate on the gelatin backbone with a simple chemical modification of the precursor, utilizing epoxide ring-opening reactions and visible light-crosslinking. This chemical modification allows the obtaining of an elastic protein-based hydrogel (GELGYM) with excellent biomimetic properties, approaching those of the native tissue. GELGYM can be modulated to be stretched up to 4 times its initial length and withstand high tensile stresses up to 1.95 MPa with compressive strains as high as 80% compared to Gelatin-methacryloyl (GeIMA), the most studied derivative of gelatin used as a bioadhesive. GELGYM is also highly biocompatible and supports cellular adhesion, proliferation, and migration in both 2 and 3-dimensional cell-cultures. These characteristics along with its super adhesion to biological tissues such as cornea, aorta, heart, muscle, kidney, liver, and spleen suggest widespread applications of this hydrogel in many biomedical areas such as transplantation, tissue adhesive, wound dressing, bioprinting, and drug and cell delivery., Graphical abstract Image 1, Highlights • Gelatin based adhesives have been used in the last decades in different biomedical applications. • Gelatin adhesives can be easily tuned to gain different viscoelastic and mechanical properties that facilitate its ocular application. • We herein grafted glycidyl methacrylate on the gelatin backbone with a simple chemical modification of the precursor. • Epoxide ring-opening reactions and visible light-crosslinking allows the obtaining of an elastic gelatin-based hydrogel (GELGYM). • GELGYM shows excellent biomimetic properties, approaching those of the native tissue.

International audience; In this work, we demonstrate P3HT (poly 3-hexylthiophene) organic rectifier diode both in rigid and flexible substrate with a rectification ratio up to 106. This performance has been achieved through tuning the work function of gold with a self-assembled monolayer of 2,3,4,5,6-pentafluorobenzenethiol (PFBT). The diode fabricated on flexible paper substrate shows a very good electrical stability under bending tests and the frequency response is estimated at more than 20 MHz which is sufficient for radio frequency identification (RFID) applications. It is also shown that the low operating voltage of this diode can be a real advantage for use in a rectenna for energy harvesting systems. Simulations of the diode structure show that it can be used at GSM and Wi-Fi frequencies if the diode capacitance is reduced to a few pF and its series resistance to a few hundred ohms. Under these conditions, the DC voltages generated by the rectenna can reach a value up to 1 V.

International audience; Abstract:This paper details an extraction procedure to fully model the transient self-heating of transistors from a GaN HEMT technology. Frequency-resolved gate resistance thermometry (f-GRT) is used to extract the thermal impedance of HEMTs with various gate widths. A fully scalable analytical model is developed from the experimental results. In the second stage, transient thermoreflectance imaging (TTI) is used to bring deeper insights into the HEMTs' temperature distribution by individually extracting the transient self-heating of each finger. TTI results are further used to successfully validate the f-GRT results and the modeling of the thermal impedance. Overall, f-GRT is demonstrated to be a fast and robust method for characterizing the transient thermal characteristics of a GaN HEMT. For the first time to the authors' knowledge, a scalable model of the thermal impedance is extracted fully from experimental results.

International audience; Suffusion refers to a special form of internal erosion characterized by the selective erosion of the finest particles of a soil under the action of an internal fluid flow. In this work, the microscopic mechanism of particle detachment in binary mixtures subjected to suffusion under different flow directions is analyzed. We use the coupled lattice Boltzmann method (LBM) and discrete element method (DEM) to simulate the suffusion process in a granular sample subjected to an anisotropic stress state. When the macro flow direction is aligned with the principal direction of compression, it is found that the fluid flow is more intense, which increases erosion. The stress anisotropy also influences the detachment direction that is not necessarily correlated with the macroscopic flow direction. The sample's anisotropic stress state is responsible for directional variations in microstructural properties during the suffusion under different flow directions. From a micro scale point of view, a contact sliding index P and a particle detachment index Δ are defined to demonstrate that fluid-induced sliding dominates for particles about to detach.

International audience; ConspectusThe chemical study of materials from natural history and cultural heritage, which provide information for art history, archeology, or paleontology, presents a series of specific challenges. The complexity of these ancient and historical materials, which are chemically heterogeneous, the product of alteration processes, and inherently not reproducible, is a major obstacle to a thorough understanding of their making and long-term behavior (e.g., fossilization). These challenges required the development of methodologies and instruments coupling imaging and data processing approaches that are optimized for the specific properties of the materials. This Account discusses how these characteristics not only constrain their study but also open up specific innovative avenues for providing key historical information. Synchrotron methods have extensively been used since the late 1990s to study heritage objects, in particular for their potential to provide speciation information from excitation spectroscopies and to image complex heritage objects and samples in two and three dimensions at high resolution. We examine in practice how the identification of key intrinsic chemical specificities has offered fertile ground for the development of novel synchrotron approaches allowing a better stochastic description of the properties of ancient and historical materials. These developments encompass three main aspects: (1) The multiscale heterogeneity of these materials can provide an essential source of information in the development of probes targeting their multiple scales of homogeneity. (2) Chemical alteration can be described in many ways, e.g., by segmenting datasets in a semiquantitative way to jointly inform morphological and chemical transformation pathways. (3) The intrinsic individuality of chemical signatures in artifacts triggers the development of specific strategies, such as those focusing on weak signal detection. We propose a rereading of the advent of these new methodologies for analysis and characterization and examine how they have led to innovative strategies combining materials science, instrument development, history, and data science. In particular, we show that spectral imaging and the search for correlations in image datasets have provided a powerful way to address what archeologists have called the uncertainty and ambiguity of the material record. This approach has implications beyond synchrotron techniques and extends in particular to a series of rapidly developing approaches that couple spectral and spatial information, as in hyperspectral imaging and spatially resolved mass spectrometry. The preeminence of correlations holds promise for the future development of machine learning methods for processing data on historical objects. Beyond heritage, these developments are an original source of inspiration for the study of materials in many related fields, such as environmental, geochemical, or life sciences, which deal with systems whose alteration and heterogeneity cannot be neglected.

In this work, a multi-scale model established from the concept of periodic homogenization is utilized to predict the cyclic and time-dependent response of thermoplastic-based woven composites. The macroscopic behaviour of the composite is determined from finite element simulations of the representative unit cell of the periodic microstructure, where the local non-linear constitutive laws of the components are directly integrated, namely, the matrix and the yarns. The thermoplastic matrix is described by a phenomenological multi-mechanisms constitutive model accounting for viscoelasticity, viscoplasticity and ductile damage. For the yarns, a hybrid micromechanical–phenomenological constitutive model accounting for anisotropic damage and anelasticity induced by the presence of a diffuse micro-crack network is utilized. The capabilities of the overall multi-scale model are validated by comparing the numerical predictions with experimental data. Further illustrative examples are also provided, where the composite undergoes time-dependent deformations under uni-axial and non-proportional multi-axial loading paths. The multi-scale model is also employed to analyze the influence of the local deformation processes on the macroscopic response of the composite. This paper is part of the COPERSIM project managed by IRT Jules Verne (French Institute in Research and Technology in Advanced Manufacturing Technologies for Composite, Metallic and Hybrid Structures). The authors wish to associate the industrial and academic partners of this project, respectively, Arts et Metiers Institute of Technology, Solvay, Plastic Omnium, PSA and Renault.

International audience; This paper focuses on hydrogen production for green mobility applications (other applications are currently under investigation). Firstly, a brief state of the art of hydrogen generation by hydrolysis with magnesium is shown. The hydrolysis performance of Magnesium powder ball–milled along with different additives (graphite and transition metals TM = Ni, Fe, and Al) is taken for comparison. The best performance was observed with Mg–10 wt.% g mixtures (95% of theoretical hydrogen generation yield in about 3 min). An efficient solution to control this hydrolysis reaction is proposed to produce hydrogen on demand and to feed a PEM fuel cell. Tests on a bench fitted with a 100 W Proton Exchange Membrane (PEM) fuel cell have demonstrated the technological potential of this solution for electric assistance applications in the field of light mobility.

International audience; We are interested in solving flow in large trimensional Discrete Fracture Networks (DFN) with the hybrid high-order (HHO) method. The objectives of this paper are: (1) to demonstrate the benefit of using a high-order method for computing macroscopic quantities, like the equivalent permeability of fracture rocks; (2) to present the computational efficiency of our C++ software, NEF++, which implements the solving of flow in fractures based on the HHO method.

Under microwave irradiation, raw sludge was pyrolyzed mainly by evaporation of water, with a weight loss ratio of 84.8% and a maximum temperature not exceeding 200 °C. High-temperature pyrolysis of SiC sludge could be realized, with a weight loss ratio of 93.4% and a final pyrolysis temperature of 1131.7 °C. Variations between the electric field intensity distribution are the main reason for the differences of pyrolysis efficiencies. HFSS simulation showed that the electric field intensity of the raw sludge gradually decreased from 2.94 × 10 4 V/m to 0.88 × 10 4 V/m when pyrolysis ends, while that of SiC sludge decreased from 3.73 × 10 4 V/m at the beginning to 1.28 × 10 4 V/m, then increased to 4.03 × 10 4 V/m. The electromagnetic effect is the main factor (r ≥ 0.91) influencing the temperature increase and weight loss of raw sludge. Both the electromagnetic effect and heat conduction effect influenced temperature rise and weight loss of SiC sludge, but the former’s influence was comparatively larger.

In the paper the features of energy transformation processes in activated with erbium ions laser materials were discussed based on optical transitions in 4f shell of Er3+ ion. Methods of excitation of the luminescence inchalcogenide glasses doped with Er3+ ions were described and found how its intensity depends on concentrationof the ions. Up-conversion and cross-relaxation play an important role in the transformation of excitations in erbium doped materials. In cross-relaxation the energy of one center can be nonradiatively transferred to another centeror divided between the two centers, while in the up-conversion, however, energy of several centers summed up inone center, bringing it acts as an additional channel of luminescence quenching, or as a way of pumping of thehigher energy levels.To improve the efficiency of optical excitation of many laser materials doped with erbium ions thesensitization with ytterbium ions that have intense absorption band in the range of ~(0.9-1)μm with "effective"width of about 1000 cm-1 as well a channel of the efficient nonradiative excitation energy transfer to Er3+ ions iswidely used. Scheme of energy transfer from Yb3+ ion to Er3+ ion was discussed and necessary conditions foreffective settlement of the upper laser level 4I13/2 of Er3+ ions in the ytterbium-erbium laser medium wereclarified.Keywords: lasermaterials, rareearthelements, up-conversion, cross-relaxation., В статті проведений аналіз різних літературних джерел, в яких описані основні процеси трансформації енергії в активованих йонами Er3+ лазерних матеріалах. Встановлено, що в основі цих процесів лежать ап-конверсійні та крос-релаксаційні переходи, які дають можливість реалізувати генерацію в ербієвих лазерах. Ефективним сенсибілізатором для йонів ербію є йони ітербію, які за рахунок безвипромінювального перенесення збудження ефективно передеють енергію йонам Er3+.

International audience; Intermediate filaments are a key component of the cytoskeleton. Their transport along microtubules plays an essential role in the control of the shape and structural organization of cells. To identify the key parameters responsible for the control of intermediate filament transport, we generated a model of elastic filament transport by microtubule-associated dynein and kinesin. The model is also applicable to the transport of any elastically-coupled cargoes. We investigate the effect of filament properties such as number of motor binding sites, length, and elasticity on motion of filaments. Additionally, we consider the effect of motor properties, i.e. off rates, on filament transport. When one motor has a catch bond off rate it dictates the motion, whereas when motors have the same type of off rate filaments can alternate between retrograde and anterograde motions. The elasticity of filaments optimizes the filament transport and the coordination of motors along the length of the filament.

Cellulose nanofiber films (CNFF) were treated via a welding process using ionic liquids (ILs). Acid-base-conjugated ILs derived from 1,5-diazabicyclo[4.3.0]non-5-ene [DBN] and 1-ethyl-3-methylimidazolium acetate ([emim][OAc]) were utilized. The removal efficiency of ILs from welded CNFF was assessed using liquid-state nuclear magnetic resonance (NMR) spectroscopy and Fourier transform infrared spectroscopy (FTIR). The mechanical and physical properties of CNFF indicated surface plasticization of CNFF, which improved transparency. Upon treatment, the average CNFF toughness increased by 27%, and the films reached a Young's modulus of ∼5.8 GPa. These first attempts for IL "welding" show promise to tune the surfaces of biobased films, expanding the scope of properties for the production of new biobased materials in a green chemistry context. The results of this work are highly relevant to the fabrication of CNFFs using ionic liquids and related solvents. acceptedVersion

The present study aims at understanding the mechanical and thermal properties of natural fibers in a polymer matrix without strong adhesionbetween the two constitutes. For this purpose, four types of pulps, which arerefined and unrefined pine and birch kraft pulps,were used together with polypropylene without any compatibilizer. One constituent pulpbasedand composite pulp fiber-polypropylene handsheets were prepared by standard laboratory sheet preparation method followed by hot pressing process. In addition to these handsheets, pure polypropylene sheets were also formed as the reference. The produced handsheets were testedtodetermine their tensile properties following the ISO 1924-2 standard for paper and board. During these tests, infrared thermal imaging was also carried out with FLIR A655SC thermal camera with frame rate of 200 Hz and thermal resolution of 50 mK so as to investigate the thermal behavior. As a result of the experiments, it was deducedthat the chosen methods produced composites with unsatisfactory properties. In addition, microstructures of the investigated handsheets were analyzed with scanning electronmicroscopy (SEM)indicating theheterogeneous mixing of constituents and existence of material defects, whichwas mainly due to the inherent incompatibility of hydrophilic natural fibers and hydrophobic thermoplastics. The study aims at pavinga way for improved naturalfiber-polymer composite manufacturing methods, a requirement for better understanding the natural fiberand polymer matrix bonding practices.

Recent years have seen an increased interest towards utilizing bio-based and biodegradable materials for barrier packaging applications. Most of the above said materials usually have certain shortcomings that discourage their adoption as a preferred material of choice. Nanocellulose falls into such category. It has excellent barrier against grease, mineral oils and oxygen, but poor tolerance against water vapor, which makes it unsuitable to be used at high humidity. In addition, nanocellulose suspensions' high viscosity and yield stress already at low solids content, and poor adhesion to substrates create additional challenges for high-speed processing. Polylactic acid (PLA) is another potential candidate that has a reasonably high tolerance against water vapor, but rather poor barrier against oxygen. The current work explores the possibility to combine both these materials into thin multilayer coatings onto paperboard. A custom-built slot-die was used to coat either microfibrillated cellulose (MFC) or cellulose nanocrystals (CNCs) onto pigment-coated baseboard in a continuous process. These were subsequently coated with PLA using a pilot scale extrusion coater. Low-density polyethylene (LDPE) was used as a reference extrusion coating. Cationic starch pre-coating and corona treatment improved the adhesion at nanocellulose/baseboard and nanocellulose/PLA interfaces, respectively. Water vapor transmission rate for nanocellulose + PLA coatings remained lower than the control PLA coating, even at a high relative humidity of 90% (38 oC). The multilayer coating had 98% lower oxygen transmission rate compared to just PLA coated baseboard and heptane vapor transmission rate reduced by 99% in comparison to baseboard. Grease barrier for nanocellulose + PLA coatings increased 5-fold compared to nanocellulose alone and 2-fold compared to PLA alone. This approach of processing nanocellulose and PLA into multiple layers utilizing slot-die and extrusion coating in tandem has the potential to produce a barrier packaging paper that is both 100% bio-based and biodegradable. publishedVersion

International audience; In this work, we propose to study and design a coil used to magnetize, by means of a Pulsed Field Magnetization (PFM) process, an inductor of a radial flux superconducting machine with one pair of poles. Each pole contains four similar HTS bulks of 30 mm diameter arranged in a square pattern. The cryostat already exists for this application and the temperature of the HTS bulks can vary from 4.2 K to their critical temperature, in transient state. For a given primary source of energy, here a capacitor bank of 10 kJ (5 mF, 2 kV) is available, the PFM process depends strongly on the value of the coil inductance used to generate pulsed field, because it defines the waveform of the current: peak value and time constant. Thus, 3D modeling of the coil is required in order to be sure that its inductance and the magnetic field produced will provide a full magnetization of HTS bulks. From the practical point of view, we would like to achieve an average magnetization of each pole around 3 T. In this paper, numerical modeling of coils with different number of turns coupled with circuit's equations is achieved. The maximum magnetic field obtained on the HTS bulks and estimated magnetization at the top center of each HTS bulk, are presented and discussed.

We systematically investigated the effect of film-forming polyvinyl alcohol and crosslinkers, glyoxal and ammonium zirconium carbonate, on the optical and surface properties of films produced from TEMPO-oxidized cellulose nanofibers (TOCNFs). In this regard, UV-light transmittance, surface roughness and wetting behavior of the films were assessed. Optimization was carried out as a function of film composition following the “random forest” machine learning algorithm for regression analysis. As a result, the design of tailor-made TOCNF-based films can be achieved with reduced experimental expenditure. We envision this approach to be useful in facilitating adoption of TOCNF for the design of emerging flexible electronics, and related platforms.

This study combines the high-throughput capabilities of microfluidics with the sensitive measurements of microelectromechanical systems (MEMS) technology to perform biophysical characterization of circulating cells for diagnostic purposes. The proposed device includes a built-in microchannel that is probed by two opposing tips performing compression and sensing separately. Mechanical displacement of the compressing tip (up to a maximum of 14 &micro, m) and the sensing tip (with a quality factor of 8.9) are provided by two separate comb-drive actuators, and sensing is performed with a capacitive displacement sensor. The device is designed and developed for simultaneous electrical and mechanical measurements. As the device is capable of exchanging the liquid inside the channel, different solutions were tested consecutively. The performance of the device was evaluated by introducing varying concentrations of glucose (from 0.55 mM (0.1%) to 55.5 mM (10%)) and NaCl (from 0.1 mM to 10 mM) solutions in the microchannel and by monitoring changes in the mechanical and electrical properties. Moreover, we demonstrated biological sample handling by capturing single cancer cells. These results show three important capabilities of the proposed device: mechanical measurements, electrical measurements, and biological sample handling. Combined in one device, these features allow for high-throughput multi-parameter characterization of single cells.

Degenerative discopathy is a common pathology that may require spine surgery. A metallic cylindrical pin is inserted into the vertebral body to maintain soft tissues and may be used as a reflector of ultrasonic wave to estimate bone density. The first aim of this paper is to validate a three-dimensional (3-D) model to simulate the ultrasonic propagation in a trabecular bone sample in which a metallic pin has been inserted. We also aim at determining the effect of changes of bone volume fraction (BV/TV) and of positioning errors on the quantitative ultrasound (QUS) parameters in this specific configuration. The approach consists in coupling finite-difference time-domain simulation with X-ray microcomputed tomography. The correlation coefficient between experimental and simulated speed of sound (SOS)—respectively, broadband ultrasonic attenuation (BUA)—was equal to 0.90 (respectively, 0.55). The results show a significant correlation of SOS with BV/TV ( R = 0.82), while BUA values exhibit a nonlinear behavior versus BV/TV. The orientation of the pin should be controlled with an accuracy of around 1° to obtain accurate results. The results indicate that using the ultrasonic wave reflected by a pin has a potential to estimate the bone density. SOS is more reliable than BUA due to its lower sensitivity to the tilt angle.

In this paper, a new modelling approach is presented to describe the damaged mechanical response of unidirectional composites under the small strain assumption. The proposed constitutive equations inherits from the phenomenological theories of Continuum Damage Mechanics (CDM) but brings out a micromechanical description of the damaged Representative Volume Element (RVE) while being formulated in a proper thermodynamical framework. The model is provided with an implicit numerical scheme based on the so-called ”return mapping algorithm” as well as the formulation of the tangent operator. The identification and the prediction capabilities of the model are validated using experimental data including off-axis tensile tests. Finally, to provide a better understanding of the model, a multi-axial non-proportional simulation is performed and analysed. This paper is part of the COPERSIM project managed by IRT Jules Verne (French Institute in Research and Technology in Advanced Manufacturing Technologies for Composite, Metallic and Hybrid Structures). The authors wish to associate the industrial and academic partners of this project; respectively Arts et Metiers ParisTech, Solvay, Plastic Omnium, PSA and Renault.

International audience; Adding catalyst could improve the yields and qualities of bio-gas and bio-oil, and realize the oriented production. Results showed that the catalytic gas-production capacities of CaO were higher than those of Fe2O3, and the bio-gas yield at 800°C reached a maximum of 35.1%. Because the polar cracking active sites of CaO reduced the activation energy of the pyrolysis reaction and resulted in high catalytic cracking efficiencies. In addition, the quality of bio-oil produced by CaO was superior to that by Fe2O3, although the bio-oil yield of CaO was relatively weak. The light bio-fuel oriented catalytic pyrolysis could be realized when adding different catalysts. At 800°C, CaO was 45% higher than Fe2O3 in aspect of H2 production while Fe2O3 was 103% higher than CaO in aspect of CH4 production. Therefore, CaO was more suitable for H2 production and Fe2O3 was more suitable for CH4 production.

International audience; Hybrid perovskite thin films have demonstrated impressive performance for solar energy conversion and optoelectronic applications. However, further progress will benefit from a better knowledge of the intrinsic photophysics of materials. Here, the temperature-dependent emission properties of CH3NH3PbI3 single crystals are investigated and compared to those of thin polycrystalline films by means of steady-state and time-resolved photoluminescence spectroscopy. Single crystals photoluminescence present a sharp excitonic emission at high energy, with full width at half maximum of only 5 meV, assigned to free excitonic recombination. We highlight a strong thermal broadening of the free excitonic emission, due to exciton–LO-phonon coupling. The emission turned to be very short-lived with a subnanosecond dynamics, mainly induced by the fast trapping of the excitons. The free excitonic emission is completely absent of the thin film spectra, which are dominated by trap state bands.

Maintaining a proper pH level is crucial for successful cell culturing. Mammalian cells are commonly cultured in incubators, where the cell culture medium is saturated with a mixture of air and 5% carbon dioxide (CO2). Therefore, to keep cell culture medium pH in an acceptable level outside these incubators, a suitable CO2 concentration must be dissolved in the medium. However, it can be very difficult to control and measure precisely local concentration levels. Furthermore, possible undesired concentration gradients generated during long-term cell culturing are almost impossible to detect. Therefore, we have developed a computational model to estimate CO2 transport in silicone-based microfluidic devices. An extensive set of experiments was used to validate the finite element model. The model parameters were obtained using suitable measurement set-ups and the model was validated using a fully functional cell cultivation device. The predictions obtained by the simulations show very good responses to experiments. It is shown in this paper how the model helps to understand the dynamics of CO2 transport in silicone-based cell culturing devices possessing different geometries, thus providing cost-effective means for studying different device designs under a variety of experimental conditions without the need of actual testing. Finally, based on the results from the computational model, an alternative strategy for feeding CO2 is proposed to accelerate the system performance such that a faster and more uniform CO2 concentration response is achieved in the area of interest. acceptedVersion

International audience; The aim of this work was to analyse the material behaviour of thermally modified and native spruce by load applied perpendicularly to the grain. Therefore, thermally modified and native samples were prepared for bending tests with the load in tangential direction. The bending strength in radial direction decreases significantly with the thermal treatment. The fracture surfaces in the tangential section of the bending samples after testing were analysed with a scanning electron microscope. For native samples, the typical failure was found in the intercellular area. For thermally modified samples, failure of the entire cell wall was observed. The material behaviour is more brittle, as demonstrated by the load-deflection curves, but also by anatomical studies of the fracture surfaces.

Slippery, liquid-infused porous surfaces offer a promising route for producing omniphobic and anti-icing surfaces. Typically, these surfaces are made as a coating with expensive and time consuming assembly methods or with fluorinated films and oils. We report on a route for producing liquid-infused surfaces, which utilizes a liquid precursor fed oxygen-hydrogen flame to produce titania nanoparticles deposited directly on a low-density polyethylene film. This porous nanocoating, with thickness of several hundreds of nanometers, is then filled with silicone oil. The produced surfaces are shown to exhibit excellent anti-icing properties, with an ice adhesion strength of ∼12 kPa, which is an order of magnitude improvement when compared to the plain polyethylene film. The surface was also capable of maintaining this property even after cyclic icing testing. Slippery, liquid-infused porous surfaces (SLIPSs) are nature inspired surfaces that are designed to repel liquid and solid materials. These surfaces have been shown to pose anti-icing properties, which broadens the available end-uses from the chemical industry to arctic transportation and energy production. The method behind repellency of SLIPSs relies on preventing outside liquids from penetrating the surface structure to the Wenzel state. Instead, the slippery liquid within the porous solid supports the Cassie-Baxter state (instead of air, here the porous structure is filled with lubricant), where the reduced area of the porous solid surface is available to interact with the liquid or ice to be repelled. The difference between Wenzel and Cassie-Baxter states is illustrated in Figure 1. This phenomenon is exploited in many superhydrophobic surfaces where an air cushion is entrapped within the porous solid surface. As a result, spherical water drops easily roll off the surface (and have static contact angles larger than 150°). publishedVersion

The electronic structure of recently synthesized square superlattices with atomic coherence composed of PbSe, CdSe, or CdTe nanocrystals (NCs) attached along {100} facets is investigated using tight-binding calculations. In experimental realizations of these systems [W. H. Evers et al., Nano Lett. 13, 2317 (2013)], NC facets are atomically bonded, resulting in single-crystalline sheets, which, due to their nanogeometry, have an effective dimensionality below two. We predict electronic structures composed of successive bands formed by strong coupling between the wave functions of nearest-neighbor NCs. This coupling is mainly determined by the number of atoms at the NC bonding plane. The band structures deviate markedly from that of the corresponding two-dimensional (2D) quantum well; the 2D case can be recovered, however, if the effects of the nanogeometry are gradually reduced. The width of the bands can reach hundreds of meV, ascribing highly promising transport properties to square superlattices. The band edges are located at k=0 except for PbSe superlattices, where their position in k space surprisingly depends on the parity of the number of {100} atomic planes in the NCs. Our calculations demonstrate that semiconductors with dimensionality below two have a strong potential for (opto-)electronic, photovoltaic, and spintronic applications.

International audience; The aim of this investigation was to compare the mechanical behaviour of lengthwise and plain sliced veneer of the species beech ( L.). Therefore, tension tests parallel and perpendicular to the grain were carried out. The results were evaluated using the variance analysis (ANOVA). As a result it can be stated that lengthwise sliced veneers exhibit significantly higher strength and better mechanical characteristics than plain sliced veneers. The checks parallel to the grain which occurred by manufacturing at that side of the veneer leaf which faces the cutting edge and which is stressed in tension are to be considered as reason therefore. In contrast to the tests parallel to the grain the modulus of elasticity perpendicular to the grain shows significantly lower values for lengthwise sliced veneers than for plain sliced veneers. Due to their higher strength values lengthwise sliced veneers are considered better base materials for engineered wood products than plain sliced veneers.

International audience; For the production of spliced veneers the veneers are coated with thin cellulose fleece or special paper layers, and thereby thin composites are generated. This article describes the mechanical properties of such a composite material consisting of 0.35 mm beech ( L.) veneer and a 0.12 mm cellulose fleece bonded with a PVAc adhesive.

(Ba,Ca)(Ti,Zr)O3 solid solutions are promising lead-free piezoelectrics near their polymorphic phase boundary, which is believed to be linked to the interplay between B-site driven ferroelectricity and A-site driven ferroelectricity. Focusing on (Ba,Ca)TiO3, we support this picture from first-principles calculations. In particular, we show how steric effects related to the partial substitution of Ba by Ca largely enhance the Ca-driven ferroelectricity, already virtually allowed in the parent CaTiO3. The emergent interplay between the Ca-driven and Ti-driven mechanisms lowers the energy barrier between different polar states, which eventually results in a quasi-isotropic polarization under substitution of a small concentration of Ba by Ca. A sizeable enhancement of the piezoelectric response directly results from these features.(Ba,Ca)(Ti,Zr)O3 solid solutions are promising lead-free piezoelectrics near their polymorphic phase boundary, which is believed to be linked to the interplay between B-site driven ferroelectricity and A-site driven ferroelectricity. Focusing on (Ba,Ca)TiO3, we support this picture from first-principles calculations. In particular, we show how steric effects related to the partial substitution of Ba by Ca largely enhance the Ca-driven ferroelectricity, already virtually allowed in the parent CaTiO3. The emergent interplay between the Ca-driven and Ti-driven mechanisms lowers the energy barrier between different polar states, which eventually results in a quasi-isotropic polarization under substitution of a small concentration of Ba by Ca. A sizeable enhancement of the piezoelectric response directly results from these features.