Search

Acetobacter aceti and Gluconobacter roseus, which are known to be responsible for the spoilage of wine, are used for current generation in batch-type microbial biofuel cells and it has been shown for the first time that these two microorganisms do not require mediators for the transfer of electrons to the anode. Three biofuel cells were constructed with two cells containing the pure cultures of each of the microorganisms as the biocatalyst (A-MFC, G-MFC) and the third cell was constructed with the mixed culture of these two microorganisms as the biocatalyst (AG-MFC). The performance of the biofuel cells was evaluated in terms of open circuit voltage (OCV), fuel consumption rate, internal resistance, power output, and coulombic efficiency. The mixed culture cell (AG-MFC) exhibits a better overall performance compared to the other cells.

The main focus of this review is to illustrate the amenability of self-assembled monolayers (SAMs) for functionalisation with different receptors, catalytic materials, biomolecules, enzymes, antigen-antibody, etc for various applications. The review discusses initially about the preparation and characterization of SAMs and tailoring of SAMs by incorporation of suitable recognition elements. A description of how the molecular recognition is achieved through forces like electrostatic, covalent and host-guest interactions is included in the review.

In this work we demonstrate the preparation of highly catalytically active Pt formed by the galvanic replacement of the copper adlayer on Au substrates, modified by the self-assembly of fourth generation amine terminated PAMAM dendrimer (G4NH2). The copper adlayer was formed on the dendrimer-modified gold substrate by chemical preconcentration of copper ions followed by electrochemical reduction. The Pt overlayer was characterized by SEM, XPS and by cyclic voltammetry. The catalytic efficiency of the modified film thus prepared through soft route was evaluated by the electro catalytic oxidation of methanol using cyclic voltammetry, chronoamperometry and AC impedance techniques. This work also demonstrates that the copper adlayer formed on the dendrimer-modified electrode can undergo galvanic replacement by nobler metals like Au and Ag, besides Pt. An elegant soft route involving a new three-step protocol to build the concentration of active Pt on the Au surface has been developed. Concentration of the same metal (Pt) or two different metals (Pt–Au) can be built at the interface in a stepwise manner at ambient temperature.

A soft route for the preparation of catalytically active multilayers of Pt films free from poisoning effects is reported. The SAMs (self-assembled monolayers) were initially formed on the gold substrates and they act as nucleating centers initiating the formation of multilayers of Pt on gold substrates. The nanoscale to mesoscale structures of Pt thus prepared were characterized by SEM and XPS. The SAM-based Pt structures exhibited well-defined hydrogen adsorption, desorption regions associated with very high charge indicating high surface area Pt. The electrocatalytic activity of the multilayers of Pt was characterized by methanol oxidation and a comparison was made with two commercial Pt catalyst preparations.

We report here the synthesis of palladium (Pd) nanoparticles incorporated poly-(3,4)ethylenedioxythiophene (PEDOT) matrix in aqueous medium and its catalytic performance towards 4-nitrophenol reduction. This simple one-pot synthesis involving a redox reaction between 3,4-ethylenedioxythiophene and palladium chloride (PdCl2) precursor, leads to the formation of Pd nanoparticles supported on particulate PEDOT. Pd nanoparticles of size 1–9 nm were found to distribute uniformly over the PEDOT matrix. Morphology of the Pd–PEDOT nanocomposite was characterized by field emission-scanning electron microscopy and transmission electron microscopy and the crystallographic details obtained using X-ray diffraction. The chemical nature of the PEDOT support matrix was analyzed using Fourier transform-infra red (FT-IR) spectroscopy. The catalytic activity of the composite was demonstrated using a model reaction, i.e., reduction of 4-nitrophenol to 4-aminophenol. The value of the apparent rate constant, ca. 65.8 × 10−3 s−1 obtained using UV visible spectroscopy of the reduction of 4-nitrophenol at the Pd–PEDOT nanocomposite is comparable to those reported for other catalytic systems.

Palladium (Pd) incorporated poly (3,4-ethylenedioxythiophene) (PEDOT) films were synthesized through an electrochemical route and characterized using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The electrochemical study showed catalytic oxidation of dopamine (DA) with optimum loading of Pd. DA and uric acid (UA) were detected using differential pulse voltammetry (DPV). In the presence of ascorbic acid (AA), DA-AA showed peak potential separation of 0.19 V while 0.32 V between UA-AA on Pd-incorporated PEDOT. These peak separations are large enough for sensing DA and UA in the presence of AA. DA and UA exhibited linear calibration plots and the minimum detection limits are 0.5 and 7 µM respectively. On Pd-PEDOT, the reversibility of DA oxidation was found to increase compared to bare glassy carbon electrode (GCE) and PEDOT modified GCE. Fouling effects were also found to be minimal making Pd-PEDOT composite suitable for electroanalysis.

Polyanisidine films doped with two different anions, viz., perchlorate and paratoluene sulphonate anions are prepared electrochemically on a gold substrate. Polyanisidine films doped with the anions aid in retaining the redox conductivity of the polyanisidine films. This behaviour is similar to that of polyaniline films. Unlike polyaniline films, even smaller ions like perchlorate and paratoluene sulphonate are sufficient for retaining the redox conductivity of the film, which may be primarily due to the compact, non-permeant films formed during electropolymerization. The films are found to be suitable for the immobilization of glucose oxidase enzyme and are found to be an efficient sensing matrix for glucose. The films also exhibited catalytic activity towards the oxidation of NADH. These studies indicate the usefulness of polyanisidine–anion films as sensing platform for biomolecules.

In this communication, we report a strategy for the preparation of Pt nanoparticles encapsulated in Generation 4.5 (Polyamido amine) PAMAM dendrimer and subsequent chemical linking of the nanocomposite to the gold electrode through a self assembled cystamine monolayer. The modification resulted in the formation of a robust electrochemically active thin film with very high surface area, reflected by the enhanced hydrogen adsorption coverage. Interestingly, TEM images revealed self-assembly of Pt nanoparticles and the SAED (Selected Area Electron Diffraction) patterns showed the presence of Pt single crystals (111). The Pt-dendrimer nanocomposite film obtained using the novel modification procedure exhibited high electrocatalytic activity for the oxidation of organic fuels like methanol, ethanol and ethylene glycol. The film did not suffer from degradation even after repeated use in solution-phase voltammetry. It is however observed that the intermediate SAM layer and the bulky PAMAM dendrimer (generation 4.5) have slowed down the electron transfer kinetics which is reflected by a relatively high overpotential for methanol oxidation. Nevertheless this shortcoming is more than compensated by the existence of Pt(111) planes, which alleviate CO poisoning.

The direct electron transfer exhibited by the yeast cells, Hansenula anomala has been demonstrated using the electrochemical technique cyclic voltammetry by immobilizing the microorganisms by two different methods viz., physical adsorption and covalent linkage. The analysis of redox enzymes present in the outer membrane of the microorganisms has been carried out in this work. This paper demonstrates that yeast cells with redox enzymes present in their outer membrane are capable of communicating directly with the electrode surface and contribute to current generation in a mediatorless biofuel cells. The efficiency of current generation has been evaluated using three anode materials.

The layer-by-layer assembly of silver nanoclusters with 3,3'-dithiodipropionic acid (DTDPA) as spacers was prepared through self-assembly on a gold foil and has been characterized by cyclic voltammetric and AFM techniques. The DTDPA molecules acting as spacers between the layers of silver serve as molecular interconnects for the four layers prepared in this work. The organization of layers was found to decrease with an increase in the number of layers. The layer-by-layer assembly of silver clusters motivated us to prepare silver nanowires stabilized by the bifunctional molecules DTDPA through template synthesis using cellulose nitrate membranes. The nanostructures formed by this method were characterized by SEM, TEM, AFM, FTIR, CV, and photoluminescence studies. It is observed that the DTDPA molecules, instead of forming molecular interconnects, protect the structures by self-assembling themselves along the edges of the nanostructures. The concept of self-assembly protecting the nanostructures is demonstrated in this work.

Investigations are carried out with Clostridium sp. which is isolated from sugar industry effluents, as a biocatalyst for current generation in a microbial fuel cell. Two different configurations of the cell are evaluated. In both cells, the anode compartment consists of suspended cells of Clostridium sp. in a nutrient broth in a phosphate buffer. In the first configuration, the cathode compartment consisted of ferricyanide solution (0.05 M). In the second configuration, the cathode compartment consisted of cells of Thiobacillus ferrooxidans suspended in a nutrient broth. The second configuration represents a complete microbial cell with the anodic and cathodic reactions driven by micro-organisms. The performance characteristics of the two configurations are evaluated with two different anode materials, graphite and graphite felt.

Polyol mediated synthesis for the preparation of tungsten trioxide and titanium doped tungsten trioxide has been reported. The reaction was carried out using chlorides of tungsten and titanium in diethylene glycol medium and water as the reagent for hydrolysis at 190 deg. C. Formation of a blue coloured dimensionally stable suspension of the precursor materials was observed during the course of the reaction. The particle sizes of the precursor materials were observed to be around 100 nm. The precursor materials were annealed to give tungsten trioxide and titanium doped tungsten trioxide. The precursor materials were characterised using TGA/DTA, FT-IR, optical spectra, SEM, TEM and powder XRD methods. It was observed that the doping of titanium could be effected at least up to 10% of Ti in WO{sub 3}. The TGA/DTA studies indicated that WO{sub 3-x}.H{sub 2}O is the dominant material that formed during the polyol mediated synthesis. The XRD data of the annealed samples revealed that the crystalline phase could be manipulated by varying the extent of titanium doping in the tungsten trioxide matrix.

A poly(3,4-ethylenedioxythiophene) (PEDOT) modified glassy carbon electrode (GCE) was used to determine uric acid in the presence of ascorbic acid at physiological pH facilitating a peak potential separation of ascorbic acid and uric acid oxidation (ca. 365 mV), which is the largest value reported so far in the literature. Also, an analytical protocol involving differential pulse voltammetry has been developed using a microchip electrode for the determination of uric acid in the concentration range of 1 to 20 mM in presence of excess of ascorbic acid.

There is a growing interest in devising wet chemical alternatives for physical deposition methods for applications involving thin films, e.g., catalysis. Deposition of platinum on thin gold films is often a problem leading to incomplete coverage and improper adhesion to solid surfaces. Gold substrates often need pre-activation for achieving complete coverage. We demonstrate here that dendrimers with proper functionalities and size work as well-defined nucleating agents and adhesion promoters. This feature is demonstrated using an amine-terminated dendrimer of generation 4.0. This approach allows one to obtain adherent nanoparticulate films of platinum on gold. Unlike other nucleating agents and adhesion promoting compounds, dendrimers have a well-defined ordered structure in terms of their space filling ability. The stability of the films obtained with adsorbed dendrimers is demonstrated using the electrocatalytic reactions of fuels like methanol. The films formed without dendrimers cannot sustain the electro-oxidation currents due to the instability of the films while the films formed with dendrimers can sustain currents for longer duration and for several cycles. The dendrimer-derived Pt films exhibit higher catalytic activity compared to other methods

The effect of surfactant matrices on the voltammetry of an antimicrobial agent, triclosan (TCN) and its release into the aqueous continuous phase for voltammetric detection have been studied in this paper. As the surfactant concentration (wt%) was increased, the peak current was found to decrease in the order: Tween-80 > Tween-60 >>> sodium laurylsulphate. The results of these experiments are found to correlate with the published data obtained using microcalorimetry. Attempts have been made to overcome the trapping effect of surfactant matrices by designing a solution composition based on hydrotrope-driven disruption of micellar encapsulants for complete release of TCN into the analyte solution for voltammetric detection. The hydrotropes employed in this study are sodium p -toluenesulphonate and sodium benzenesulphonate. The experiments intended to show the effect of hydrotropes on the ‘pre-adsorbed’ triclosan-surfactant “pseudo-complex” proved that hydrotrope-driven disruption of micelles takes place even on the electrode surface. Thus, immersion of the surfactant-covered electrode into a hydrotrope solution can “strip” the antimicrobial agent off the surfactant. The results of these proof-of-concept experiments were applied to the analysis of low concentrations (0.1–0.8 mM) in product formulations containing TCN. A linear relationship was found between TCN concentration and current magnitude with a correlation coefficient of 0.97, the sensitivity of the measurement towards the TCN oxidation being 12.8 μA mM −1 .

Detection of dopamine (DA) in the presence of excess of ascorbic acid (AA) has been demonstrated using a conducting polymer matrix, poly (3,4-ethylenedioxythiophene) (PEDOT) film in neutral buffer (PBS 7.4) solution. The PEDOT film was deposited on a glassy carbon electrode by electropolymerization of EDOT from acetonitrile solution. Atomic force microscopy studies revealed that the electrodeposited film was found to be approximately 100 nm thick with a roughness factor of 2.6 nm. Voltammetric studies have shown catalytic oxidation of DA and AA on PEDOT modified electrode and can afford a peak potential separation of ∼0.2 V. It is speculated that the cationic PEDOT film interacts with the negatively charged ascorbate anion through favorable electrostatic interaction, which results in pre-concentration at a less anodic value. The positively charged DA tends to interact with the hydrophobic regions of PEDOT film through hydrophobic–hydrophobic interaction thus resulting in favorable adsorption on the polymer matrix. Further enhancement in sensitivity to micro molar level oxidation current for DA/AA oxidation was achieved by square wave voltammetry (SWV) which can detect DA at its low concentration of 1 μM in the presence of 1000 times higher concentration of AA (1 mM). Thus the PEDOT modified electrode exhibited a stable and sensitive response to DA in the presence of AA interference.

Self-assembled monolayers (SAMs) of thiols with carboxylic acid terminal groups were formed on gold substrates. The electron transfer characteristics of redox species on the above SAM-modified electrodes were studied in acid and neutral media with the help of voltammetry under two different conditions: (1) solution phase electron transfer and (2) bridge mediated electron transfer. Two redox systems, viz., [Fe(CN)6]4-/3− and Ru[(NH3)6]2+/3+ were chosen for the solution phase study. Investigations of bridge mediated electron transfer were carried out by functionalising the SAM with redox moieties and then studying their redox behaviour. For this study, ferrocene carboxylic acid and 1,4-diamino anthraquinone were used and they were linked to carboxylic acid terminated thiols by covalent linkage. The voltammetric results with mercaptoundecanoic acid SAM demonstrate the difference in behaviour between solution phase and bridge mediated electron transfer processes.

Mixed self-assembled monolayer of thiols were formed on the electrode surface using aromatic and aliphatic thiols and the modified interface were used to demonstrate charge trapping behavior at the modified interface. The electrode surface was modified by two schemes. In Scheme 1, electrode surface modified with methylene blue (MB) shows charge trapping behavior when contacts the electrolyte containing potassium ferricyanide. In Scheme 2, a redox-active bilayer is constructed using hexamineruthenium (II) chloride and methylene blue. This redox-active bilayer assembly exhibits unidirectional flow of current.

The behaviour of a poly (aniline boronic acid) (PABA) modified glassy carbon electrode (GCE) for the detection of dopamine (DA) in the presence of excess of ascorbic acid (AA) using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques is investigated. On bare GCE, both DA and AA are oxidized at ~0.16 V, whereas on PABA modified GCE they are oxidized at 0.2 and 0.054 V, respectively. Though PABA favours DA oxidation through ester formation with boronic acid motif, the AA oxidation is also promoted by polyaniline backbone through the involvement of AA in the redox of polyaniline. Since both DA and AA undergo oxidation at closely spaced potentials at a PABA electrode, Nafion®-incorporation into the PABA film was examined for selective determination of DA in the presence of AA. The selectivity was due to accumulation of DA on the electrode surface through ester formation with the boronic acid group and suppression of AA oxidative current through charge discrimination by Nafion.

In this paper, the electrochemical current rectification phenomenon exhibited at an electrochemical interface constituted by a glassy carbon electrode covered with a bilayer of polymer films is discussed. The authors have shown that Methylene Blue (MB) redox species can be confined to a very thin insulating polymer film formed from orthophenylene diamine. The poly(opd) film exhibited excellent blocking properties to redox molecules in solution. On the other hand, the insulating poly(opd) film trapped with MB could mediate electron transfer between the redox molecules in solution and the electrode. Further, a second polymeric layer (Nafion film) trapped with ferrocene redox species was formed as the outer layer over the inner poly (opd) film containing MB. This bilayer-modified electrode, due to the significant difference in the redox potentials of the MB and ferrocene species immobilized in the inner and outer layers, respectively, exhibits unidirectional current flow and the results of the voltammetric investigations on the modified electrodes are described in this communication.

In this work, we examine the electrocatalytic activity of electrodeposited Platinum (Pt)-Nickel (Ni) alloy layers on an inert substrate electrode for methanol oxidation reaction. Analyses using energy-dispersive fluorescent X-ray analysis and powder X-ray diffractometry confirm alloying of Pt with Ni in a range of compositions. Steady-state polarisation measurements in 0.5 M methanol+0.5 M H2SO4 solutions clearly show that the onset of electro-oxidation shifts to less anodic potential values (approximately 160 mV), while also exhibiting current enhancements up to ~15 times the currents obtained for the pure Pt electrodeposit. A linear relationship between the cyclic voltammetric peak (oxidation) current and [MeOH] is observed at a scan rate of 50 mVs−1, thus indicating reduced influence of adsorbed CO (COads) surface poison. A critical composition, Pt (92%)/Ni (8%) [denoted Pt-Ni(3) alloy] is found to exhibit maximum electrocatalytic activity, beyond which the activity drops, whereas pure Ni does not catalyse the reaction. While the promotion of electro-oxidation is understood to be largely due to the alloy catalyst, surface redox species of Ni oxide formed during the electro-oxidation process may also contribute to the oxygenation of COads, thereby enhancing the oxidation current. Plausible mechanisms of methanol oxidation on Pt/ transition metal alloy electrocatalysts are discussed in terms of electron transfer (in the alloy) and the role of Ni oxide species.

Electrochemical sensing of glucose on a gold electrode modified by the sequential incorporation of the mediator, 1,4-diaminoanthraquinone (DAAQ) and the enzyme, glucose oxidase (GOD), through covalent linkage onto a self-assembled monolayer configuration is described in this paper. It has been shown that two alternate layers of enzyme and mediator could be formed on the surface. The modified electrode is catalytic towards glucose oxidation. The catalytic response becomes more well behaved with the two-layer configuration and it is demonstrated by the amperometric experiments. The results also indicated that the mediator catalyzes the oxidation of H2O2, and also it establishes a weak electrical communication between the enzyme and the electrode surface. The results present the scope for the fabrication of membrane-free biosensors of ultra-thin dimensions.

In a new process for the production of synthetic rutile, aeration rusting is the major step where metallic iron is converted to iron oxide in the presence of catalysts such as NH 4 Cl and air. An electrochemical investigation to understand the anodic dissolution of reduced ilmenite (RI) has been carried out using a reduced ilmenite carbon paste (CP) electrode at 30 °C. Intermediate products with different iron contents were formed during the rusting reaction. Synthetic rutile with a negligible iron content was used for the investigations. The reaction mechanism and the influence of TiO 2 matrix were studied.

A phenomenon analogous to current rectification occurring in a diode could be demonstrated at the electrode/electrolyte interfaces constructed using a mixed monolayer configuration formed by the self assembly of decane thiol and thioctic acid. Two types of configuration have been described. In the first type (Configuration-1), diode like electron transfer is shown to occur in a ferrocene monocarboxylic acid functionalized mixed monolayer, in contact with the electrolyte containing potassium ferrocyanide. In the second type (Configuration-2), the functionalized mixed monolayer consists of two redox species ferrocene dicarboxylic acid and 1,4-diaminoanthraquinone linked through covalent linkage. This bilayer represents an electrochemical analogue of a diode and current rectification is observed.

A potentiometric hydrogen peroxide (H2O2) sensing scheme was developed using arylboronic acid as the electrode modifier. It is well-known that both aliphatic and aryl boronic acid undergo electrophilic displacement reaction with H2O2. This reaction involves replacement of boronic acid by the hydroxyl group of peroxide resulting in a change in pKa value that can be exploited for sensing of H2O2. Vinylphenylboronic acid (VPBA) ink was prepared using Nafion as the binder and it was drop cast on an electrode surface. Morphology of the modified electrode was analysed using scanning electron microscopy (SEM). The present modifier exhibited a linear relationship between the difference in electrode potential (∆Ep) vs. [H2O2] with a Nernstian slope of 26 ± 2 mV in the concentration range of 10− 1–10− 5 M. Application of the VPBA modified electrode for hydrogen peroxide sensing was studied in an industrial dye-bleach effluent.

Monomolecular level modification of electrode surfaces through a self-assembly approach is, of late, gaining importance in view of its many functional applications in areas such as molecular electronics, molecular recognition, electron transfer studies and electroanalysis. Self-assembled monolayer (SAM) modification of a gold electrode with 2-mercaptobenzimidazole (MBI) has been achieved. On this modified electrode, anodic stripping voltammetric determination of mercury at ppm/sub-ppm level concentrations has been successfully attempted. Pre-concentration, prior to stripping, has been effected through a non-electrolytic process involving chemical interactions between MBI and Hg(II). The results are described and discussed with a plausible scheme. Keywords: 2-Mercaptobenzimidazole, Self-assembled monolayer, Mercury(II), Anodic stripping voltammetry

The formation of metal monolayers through underpotential deposition (UPD) depends on the interactions between the electrode surface and the depositing species. Other adsorbable species, if present in the solution, will influence the formation of UPD metal films through their adsorption on the electrode surface, taking place simultaneously. Copper UPD formation on polycrystalline gold surfaces has been investigated in the presence of small amounts of urea, thiourea (TU) and N-substituted thioureas using cyclic voltammetry. The results show that the UPD of copper on gold is significantly influenced by the presence of thiourea in solution. The charge corresponding to the stripping peak obtained in the presence of both Cu2+ and TU in solution is always larger than the sum of the charges resulting when either of them is present alone. Again, the charge observed during stripping in the presence of both Cu2+ and TU is believed to arise from (i) stripping of the UPD Cu, (ii) adsorption–desorption of TU and (iii) oxidation of Cu(TU)n+ complexes. The addition of N-substituted TUs is found to influence the UPD of Cu to different extents. This is tentatively explained in terms of the structure of the organic molecules.

The monolayers of 2-mercaptobenzothiazole (MBT) on polycrystalline Au and Ag films have been studied by surface-enhanced Raman (SERS) and X-ray photoelectron (XPS) spectroscopies. Whereas MBT adsorbs with its molecular plane flat on Ag, its plane is perpendicular on Au. This difference in adsorbate geometry is manifested as differences in the intensities of certain vibrational peaks in the Raman spectra. Ab initio molecular orbital (MO) calculations suggest that MBT adsorbs on Au in the thione form and on Ag in the thiol form. The monolayers are stable up to a temperature of 473 K, much higher than most of the self-assembled monolayers (SAMs) studied so far. The adsorption geometry does not undergo any significant change when the monolayers are heated, although minor changes are observed in the SER spectra of the Ag monolayer. Raman intensities of all the bands increase with heating, and the enhanced intensity is preserved even after cooling. This is attributed to monolayer-induced coalescence of gold islands leading to the formation of an extended self-assembly. XPS studies confirm chemisorption, although structural details are not manifested. Copyright 1999 Academic Press.

Electrochemical studies on gold electrodes covered with self-assembled monolayers (SAM) of aminoethane thiol (AET), mercaptobenzothiazole (MBT) and octadecyl mercaptan (ODM) have been carried out using cyclic voltammetry. Study of the influence of these monolayers on the double layer capacity of the interfaces involving the Au/SAM electrodes and of the electron transfer kinetics of chosen redox reaction probes, viz., Fe(CN) 6 4−/3− , Fe2+/3+, hydroquinone/quinone(H2 Q/Q) and Cu underpotential deposition, offers a wealth of information that can throw light on the role of SAMs in allowing/moderating/blocking the electron transfer at such interfaces. These details are presented and discussed in the paper.

Hexacyanoferrate modification of gold electrode has been achieved by immobilizing the species in a self-assembled monolayer of 3,3‘-thiodipropionic acid anchored to the gold surface. The surface coverage of hexacyanoferrate is estimated from the voltammetric data point to be about one monolayer, and the modified electrode exhibits excellent surface redox behavior. Further, it shows good electrocatalytic influence on the oxidation of hydrazine and ascorbic acid.

Modification of electrode surfaces with bilayers of organic/inorganic materials is shown to exhibit a variety of functional characteristics. The use of conducting polymers for bilayer construction has recently been explored by various groups. Gold surface has been modified with bilayers of polyaniline and polypyrrole, and the photoelectrochemical and electrochemical characteristics of such bilayer electrodes have been investigated and are reported in this communication.

Simultaneous underpotential deposition of lead and thallium from a tartrate medium on a polycrystalline silver electrode is reported. Results of cyclic voltammetric investigations of the effects of concentration and sweep rate on the codeposition behaviour are discussed. Further investigations of the codeposition behaviour through voltammetric experiments using programmed potential inputs are described and discussed in terms of formation of a two-dimensional alloy. Finally, the validity of the existing models of electrochemical phase formation has been investigated under the codeposition conditions.

This work describes an electrochemical method for the determination of the nitrate and nitrite reductase activities of Rhizobium japonicum. The advantage of the method lies in the use of whole cells for the analysis and we earlier developed this protocol for the assay of NO. The results obtained are comparable to the spectrophotometric Griess assay. As the method is based on electrochemical reduction, the commonly interfering biological components like ascorbic acid, uric acid, dopamine, etc., will not interfere with the analysis. This method can be extended to the fabrication of biosensors for nitrate and nitrite using the same principle.

Phosphosilicate molecular precursor for the synthesis of NASICON, natrium super ionic conductor, Na1+xZr2SixP3−xO12 (x = 1 and 2) has been devised and prepared by the hydrolysis of tetraethoxysilane (TEOS) employing sodium phosphate solution. The molecular precursor was reacted with Zr(OC3H7)4 in ethanol under solvolytic condition to yield nano precursor material of NASICON. This material was annealed at high temperature to yield phase-pure NASICON. The molecular precursor was characterized using 31P NMR, FTIR spectral data, powder XRD pattern and TG/DTA studies. The structure of the molecular precursor was deduced from the powder XRD data, which indicates the presence of edge sharing tetrahedral arrangement of −O−Si−O−P−O−Si− chain. The NASICON precursor material was characterized using TG/DTA, FTIR, TEM, SEM, MAS 31P NMR and XRD. The conductivity of the synthesized NASICON material was measured using the pellet annealed at 900 °C and was found to be 5.5 x10−3 S cm−1. The details on the preliminary inves...

The oxidation behaviour of methanol on platinum at room temperature in a low concentration of phosphoric acid (≈ 5%) has been studied. Voltammetric behaviour in phosphoric acid medium is compared with that in perchloric acid. The effect of a bismuth underpotential deposition (upd) layer on the oxidation of methanol is also reported.

The codeposition of lead and thallium UPD's on polycrystalline silver has been investigated. Studies on the effect of deposition time on the formation of the codeposit suggest the codeposit to be a solid solution resulting from underpotentially deposited mono/submono layers of lead and thallium with the stoichiometric ratio of 1 : 2 (Pb : T1).

Simultaneous deposition of lead and thallium UPD s on polycrystalline silver has been investigated under cyclic voltammetric conditions. Voltammetric data, resulting from systematic variation of potential sweep rates and concentration of metal ions, are presented and discussed. The experimental results for composite lead and thallium UPD s, obtained from mixed as well as single metal UPD s, obtained from single salt solutions under comparable conditions, have been analyzed in terms of the empirical models proposed for the growth mechanism based on adsorption/nucleation phenomena.

The formation and characterization of self-assembled monolayers of organosulfur compounds like alkanethiols and dialkyl (di)sulfides on metal surfaces such as gold are areas of current research interest. The presence of an aromatic ring in a thiol molecule can enhance the binding between Au and the thiol, resulting in the formation of compact and impervious self-assembled monolayers. The formation of a monolayer of 2-mercaptobenzothiazole (MBT), containing an aromatic group with a fused thiazole ring but no long alkyl chain, is achieved on a gold electrode surface. Voltammetric investigations of ferro/ferricyanide and ferrous/ferric redox systems carried out on this Au|MBT electrode are reported. Further, the possibility of using such an Au|MBT electrode to distinguish between inner and outer sphere electron transfer reactions is indicated.

In this work, gold-incorporated polyethylenedioxythiophene nanocomposite material has been synthesized chemically, employing reverse emulsion polymerization method. Infrared and Raman spectroscopic studies revealed that the polymerization of ethylenedioxythiophene leads to the formation of polymer polyethylenedioxythiophene incorporating gold nanoparticles. Scanning electron microscope studies showed the formation of polymer nanorods of 50–100 nm diameter and the X-ray diffraction analysis clearly indicates the presence of gold nanoparticles of 50 nm in size.

The present work describes, for the first time, in situ electrochemical preparation of dendrimer-encapsulated Cu nanoparticles using a self-assembled monolayer of fourth-generation amine-terminated polyamidoamine (PAMAM) dendrimer as the template. Atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) studies of the modified surface confirmed the presence of Cu nanoparticles entrapped in dendrimer film. Au electrode modified with a monolayer of the dendrimer enables preconcentration and subsequent voltammetric detection of Cu(2+) at picomolar concentrations. Further, Cu nanoparticles in the dendrimer monolayer could be electrochemically derivatised to Cu hexacyanoferrate, which exhibits specific crystal planes, unlike the random distribution of crystal planes in bulk-formed Cu hexacyanoferrate, which is another catalytically active material for sensor applications.

Formation of self assembled monolayers on gold surface by thiols and disulphides is a well known phenomenon and extensive research work has been carried out in this area with envisaged applications in the area of sensors, molecular electronics, lithography, device fabrication using bottom-up approach, etc. Recently, it has been established that thiophene molecules can self assemble on gold surface due to Au-S interactions. 3-(3-thienyl) acrylic acid, a bifunctional ligand is used in this work to form self-assembled monolayers on planar gold surfaces (two dimensional assemblies) and to prepare monolayer protected gold nano clusters (three-dimensional assemblies). The electron transfer blocking properties of the two-dimensional monolayers were evaluated by using standard redox probes like ferrocyanide anions and Ruthenium hexamine cations. The functionalisation of the two-dimensional and three-dimensional assemblies has been carried out with ferrocene carboxylic acid and the functionalised monolayers were characterized by Cyclic voltammetry. The formation of thienyl acrylic acid protected nanoclusters has been verified by TEM and surface plasmon resonance absorption. It has been observed that when thiophene based ligands are used as stabilizers for the formation of metal nanoparticles, they tend to aggregate as a result of pi-pi interactions between adjacent thiophene ligands. In this case it is found that aggregation is prevented. The substituent at the thiophene ring hinders pi-pi interactions. The quantised nature of electrochemical charging of these nanoparticles has been demonstrated by differential pulse voltammetry (DPV), which exhibit peak like features (coulomb's staircase). This work also explores the possibility of using 3-(3-thienyl) acrylic acid as building blocks or spacers on planar and colloidal gold surfaces for potential applications in the field of sensors and devices.

This paper describes the formation of catalytically active thin films of Pt, Pt/Au, and Pt/Ru on gold substrates stabilized by amine-terminated polyamidoamine (PAMAM) dendrimers. A monolayer of dendrimer is initially self-assembled on the gold substrate, which serves as a template for the growth of catalytically active thin films. As dendrimers contain tens to hundreds of functional groups at the periphery, the aggregate strength of the multidentate interactions with the gold substrate leads to the formation of robust films. The films were found to exhibit high catalytic activity for the oxidation of small hydrocarbons such as methanol. Such films offer versatility and scope for the design of effective electrocatalysts, especially in the context of microfuel cells and "dendrichips"; hence, they could find applications in the fields of sensors, fuel cells, and waste-water treatment.

A gold electrode surface has been modified with a monolayer of 3,3'-thiodipropionic acid (TPA) by self-assembly. The pH-sensitive TPA monolayer is further derivatized to form a monolayer of nickel hexacyanoferrate. This electrode shows molecular discrimination between potassium and sodium ions and exhibits a near-Nernstian response, with a slope of 55 mV/decade to potassium ions in the range from 10 -2 to 1 M.

The formation of self-assembled monolayers (SAM) of 5,5'-dithiobis (2-nitrobenzoic acid), DNBA on gold has enabled further derivatization of the electrode surface with functional moieties anchored to the surface bound molecules. A SAM of DNBA was formed on the Au surface. Nickel ions tethered to the SAM-covered Au surface, were subsequently derivatized electrochemically to yield nickel hydroxide overlayers, thereby showing the possibility of preparing ultra-thin films of metal oxides through solution chemistry. The nickel hydroxide surface coverage obtained on bare and SAM-covered electrodes was estimated from voltammetric peaks and it varied from one monolayer to about 300 monolayers. The formation of a monolayer of nickel hydroxide has been achieved for the first time by electrochemical modification. Further, the modified electrodes were subjected to SERS and XPS studies to understand their surface characteristics. Modified electrodes provide a catalytic pathway involving nickel hydroxide for the electro-oxidation of glucose in alkaline solutions.

Results on the simulated η-t transient response of an ‘actively’ corroding system under accelerated Tafel plot (ATP) conditions have revealed the influence of input parameters (Δi, τ) and system parameters (C dl,i corr andb) and explained the observed dependence of kinetic parameters (arrived at on the basis of the intercept-slope method) on τ in certain time domains. New improved methods, which eliminate such dependence and give uniform corrosion rate data over all time domains, are described in the paper.