Search

Face masks represent a valuable tool to prevent the spreading of airborne viruses; however, they show poor comfort and scarce antiviral efficacy. Zein-based coatings are herein exploited to enhance antiviral performance. Zein functionalization is done through acidifying agents (lactic acid, LA). Coatings are characterized in terms of morphological, mechanical, breathability, and cytotoxicity analyses. The antiviral efficacy is tested in vitro against four viruses (Human Coronavirus OC43, Herpes Simplex Virus type 1, Human Adenovirus type 5, and MPox Virus) according to a biological assay on cell cultures. Zein/Zein LA antiviral activity seems to be linked to its positive surface charge that enables to form electrostatic interactions with negatively charged-viruses, resulting in the highest activity (reduction >2 Log) on Human Coronavirus OC43 and Herpes Simplex Virus type 1, with efficacy comparable or higher than that of copper/copper oxide-based- coatings. No significant activity is observed against Human Adenovirus type 5 and MPox Virus, due to their high resistance to inactivating treatments. Zein-based systems are not cytotoxic and their water vapor permeability is reduced of 26 % compared to that of not-coated systems. These promising results offer interesting insights into design of antiviral and sustainable coatings for personal protective equipment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Nanomaterials, due to their unique structural and functional features, are widely investigated for potential applications in a wide range of industrial sectors. In this context, protein-based nanoparticles, given proteins' abundance, non-toxicity, and stability, offer a promising and sustainable methodology for encapsulation and protection, and can be used in engineered nanocarriers that are capable of releasing active compounds on demand. Zein is a plant-based protein extracted from corn, and it is biocompatible, biodegradable, and amphiphilic. Several approaches and technologies are currently involved in zein-based nanoparticle preparation, such as antisolvent precipitation, spray drying, supercritical processes, coacervation, and emulsion procedures. Thanks to their peculiar characteristics, zein-based nanoparticles are widely used as nanocarriers of active compounds in targeted application fields such as drug delivery, bioimaging, or soft tissue engineering, as reported by others. The main goal of this review is to investigate the use of zein-based nanocarriers for different advanced applications including food/food packaging, cosmetics, and agriculture, which are attracting researchers' efforts, and to exploit the future potential development of zein NPs in the field of cultural heritage, which is still relatively unexplored. Moreover, the presented overview focuses on several preparation methods (i.e., antisolvent processes, spry drying), correlating the different analyzed methodologies to NPs' structural and functional properties and their capability to act as carriers of bioactive compounds, both to preserve their activity and to tune their release in specific working conditions.

Low-density polyethylene-based packaging with 4% lemon extract (LDPE/4LE) and two polylactic-based (PLA) packaging materials with 4% and 6% lemon extract (PLA/PEG/4LE and PLA/6LE) were produced. O 2 and water permeability tests were performed, the total and individual phenolic compounds content were measured, and the films' antioxidant activities were determined. The films' ability to delay lipid oxidation was tested in two model foods: almonds, packaged with LDPE/4LE, PLA/4LE and PLA/6LE for a maximum period of 60 days at 40 °C (accelerated assay); and beef meat, packaged with the PLA/6LE for a maximum period of 11 days at 4 °C. The LE improved the WVP in all of the active films by 33%, 20% and 60% for the LDPE/4LE, PLA/4LE and PLA/6LE films, respectively. At the end of 10 days, the migration of phenolic compounds through the PLA films was measured to be 142.27 and 114.9 μg/dm 2 for the PLA/4LE and PLA/6LE films, respectively, and was significantly higher than phenolic compounds migration measured for the LDPE/4LE (15.97 μg/dm 2 ). Naringenin, apigenin, ferulic acid, eriocitrin, hesperidin and 4-hydroxybenzoic acid were the main identified compounds in the PLA, but only 4-hydroxybenzoic acid, naringenin and p -coumaric acid were identified in the LDPE films. Regarding the films' ability to delay lipid oxidation, LDPE/4LE presented the best results, showing a capacity to delay lipid oxidation in almonds for 30 days. When applied to raw beef meat, the PLA/6LE packaging was able to significantly inhibit lipid oxidation for 6 days, and successfully inhibited total microorganisms' growth until the 8th day of storage.

Chitosan-based hybrid nanocomposites, containing cellulose nanocrystals (CNCs), graphene oxide (GO), and borate as crosslinking agents, were successfully prepared by solution-casting technique. The synergistic effect of the two fillers, and the role of the cross-linker, in enhancing the structural and functional properties of the chitosan polymer, was investigated. XPS results confirm the chemical interaction between borate ions and hydroxyl groups of chitosan, GO, and CNCs. The morphological characterization shows that the GO sheets are oriented along the casting surface, whereas the CNC particles are homogenously distributed in the sample. Results of tensile tests reveal that the presence of graphene oxide enhances the elastic modulus, tensile strength, elongation at break, and toughness of chitosan, while cellulose and borate induce an increase in the elastic modulus and stress at the yield point. In particular, the borate-crosslinked chitosan-based sample containing 0.5 wt% of GO and 0.5 wt% of CNCs shows an elongation at a break value of 30.2% and a toughness value of 988 J*m -3 which are improved by 124% and 216%, respectively, compared with the pristine chitosan. Moreover, the water permeability results show that the presence of graphene oxide slightly increases the water barrier properties, whereas the borate and cellulose nanocrystals significantly reduce the water vapor permeability of the polymer by about 50%. Thus, by modulating the content of the two reinforcing fillers, it is possible to obtain chitosan-based nanocomposites with enhanced mechanical and water barrier properties which can be potentially used in various applications such as food and electronic packaging., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest. The handling editor PM declared a shared affiliation with the authors CS, GB, GG, LV, and ML at the time of review., (Copyright © 2022 Santillo, Wang, Buonocore, Gentile, Verdolotti, Kaciulis, Xia and Lavorgna.)

Considerable attention has been given to the use of chitosan (CS)-based materials reinforced with inorganic bioactive signals such as hydroxyapatite (HA) to treat bone defects and tissue loss. It is well known that CS/HA based materials possess minimal foreign body reactions, good biocompatibility, controlled biodegradability and antibacterial property. Herein, the bioactivity of these composite systems was analyzed on in vitro bone cell models for their applications in the field of bone tissue engineering (BTE). The combination of sol-gel approach and freeze-drying technology was used to obtain CS/HA scaffolds with three-dimensional (3D) porous structure suitable for cell in-growth. Specifically, our aim was to investigate the influence of bioactive composite scaffolds on cellular behavior in terms of osteoinductivity and anti-inflammatory effects for treating bone defects. The results obtained have demonstrated that by increasing inorganic component concentration, CS/HA (60 and 70% v/v) scaffolds induced a good biological response in terms of osteogenic differentiation of human mesenchymal stem cells (hMSC) towards osteoblast phenotype. Furthermore, the scaffolds with higher concentration of inorganic fillers are able to modulate the production of pro-inflammatory (TGF-β) and anti-inflammatory (IL-4, IL-10) cytokines. Our results highlight the possibility of achieving smart CS/HA based composites able to promote a great osteogenic differentiation of hMSC by increasing the amount of HA nanoparticles used as bioactive inorganic signal. Contemporarily, these materials allow avoiding the induction of a pro-inflammatory response in bone implant site., (© 2021 The Authors. Journal of Biomedical Materials Research Part A published by Wiley Periodicals LLC.)

The latest tendency of the scientific community regards the development of different classes of green materials able to solve pollution problems caused by industrial and human activity. In this paper, chitosan and diatomite were used to produce a broad-spectrum hybrid adsorbent, either in powder or in monolithic form for environmental pollutant removal. Diatomite-chitosan-based powders and porous diatomite-chitosan hybrids were prepared and characterized by chemical-physical, thermal and morphological analysis. Moreover, their adsorbent capacity towards anionic dye (Indigo Carmine) was also evaluated. Obtained data showed that chitosan improves the adsorption capacity of both systems, increasing the uptake of dye in both diatomite-chitosan systems.

Multifunctional polymer composites with anisotropic properties are attracting interest as they fulfil the growing demand of multitasking materials. In this work, anisotropic polymer composites have been fabricated by combining the layer-by-layer (LBL) filtration method with the alternative assembling of carbon nanotubes (CNTs) and hexagonal boron nitride flakes (hBN) on natural rubber latex particles (NR). The layered composites exhibit anisotropic thermal and electrical conductivities, which are tailored through the layer formulations. The best composite consists of four layers of NR modified with 8 phr (parts per Hundred Rubber) CNTs (∼7.4 wt%) and four alternate layers with 12 phr hBN (∼10.7 wt%). The composites exhibit an electromagnetic interference (EMI) shielding effectiveness of 22.41 ± 0.14 dB mm -1 at 10.3 GHz and a thermal conductivity equal to 0.25 W m -1 K -1 . Furthermore, when the layered composite is used as an electrical thermal heater the surface reaches a stable temperature of ∼103 °C in approx. 2 min, with an input bias of 2.5 V.

Cystalline-Cc and ultra-milled Amorphous-Ca cellulose were used as reactive filler to tune the performances of composite polyurethane-cellulose-foams, PUC. The effect of Cc and Ca on chemo-physical and mechanical properties of PUC was analysed through FTIR, morphological analysis, thermal conductivity and compression measurements. FTIR results show that, both Cc and Ca react with isocyanate through the OH functional groups contributing to the formation of a tough cellulose-polyurethane network. Morphological observations show that the addition of both Cc and Ca induces a decrease of average cell-size compared to the pristine-PU, thus confirming that they act as nucleating agent. In addition, the better dispersion of the Ca in the polyol, with respect to Cc induces, a finer cell leading to a reduction of the thermal conductivity around 33 % (for the composite loaded with 20 %wt-Ca) with respect to pristine-PU. Finally, the addition of Ca highly reactive modifies the mechanical behaviour from rigid-brittle to semi-rigid., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Anisotropic aerogel-foam composites were developed by embedding a reduced graphene oxide (rGO)/chitosan aerogel directly into an open-cell polyurethane foam through an in situ bidirectional freeze-drying process. The resulting aerogel-foam composites possess both excellent compression-resilience performance and stable piezo-resistive properties due, respectively, to the excellent mechanical properties of polyurethane foams and to the presence of a chitosan-based aerogel loaded with rGO. The latter, indeed, provides outstanding electrical properties due to its conductive and parallel flat lamellar structure. It has been proven that both mechanical and piezo-resistive properties are stable even after 1000 loading/unloading cycles and a reduction of the electrical resistance of about 86% is observed upon the application of a 60% strain. The high sensitivity, long cycling life, and reliable performance over a wide strain range make this unique anisotropic aerogel-foam composite a highly promising candidate for the production of wearable sensors and healthcare monitoring devices.

Chitosan (CS) aerogels were prepared by freeze-drying as potential adsorbents for water purification, and the effect of the strategy of crosslinking was investigated by varying the amount of crosslinker (glutaraldehyde) and the sequence of steps for the preparation of the aerogel. Two procedures were compared, in which the crosslinking step was carried out before or after the freeze-drying of the starting CS solution. When crosslinking was postponed after the freeze-drying step, the adsorption capacity towards an anionic dye, such as indigo carmine, considerably increased (up to +45%), reaching values as high as 534.4 ± 30.5 mg g -1 . The same crosslinking strategy ensured a comparable improvement also in nanocomposite aerogels containing graphene oxide (GO), which was added to enhance the mechanical strength and provide adsorption capacity towards cationic dyes. Besides possessing good mechanical strength (compressive modulus higher than 1 MPa), the CS/GO aerogels were able to bind also cationic pollutants such as methylene blue. The maximum uptake capacity increased from 4.3 ± 1.6 to 168.6 ± 9.6 mg of cationic dye adsorbed per gram of adsorbent with respect to pristine CS aerogels., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Natural rubber/carbon nanotubes composite foams (F-NR/CNTs) with high electrical conductivity and excellent electromagnetic interference (EMI) performance were developed through a multi-step process including: (a) CNTs assembled on natural rubber latex particles, (b) pre-crosslinking of natural rubber, (c) supercritical carbon dioxide foaming of pre-crosslinked composite samples and (d) post-crosslinking of foamed composite samples. A closed-cell porous structure and a segregated CNT network are clearly observed in the resulting foams. Due to this morphology, F-NR/CNTs exhibit low density, good mechanical properties, and high electrical conductivity. Owing to the multiple radiation reflections and scattering between the cell-matrix interfaces, the composite foams presented an excellent specific shielding effectiveness (SSE) of 312.69 dB cm2 g-1 for F-NR/CNTs containing 6.4 wt% of CNTs, which is significantly higher than those already published for rubber composites containing comparable filler content. Furthermore, the analysis of EMI SE highlights that absorption efficiency is more significant than reflection efficiency, implying that most of the incident electromagnetic radiation is dissipated in the form of heat. This work provides the fundamentals for the design of innovative light weight and efficient EMI shielding foams characterized by a three-dimensional segregated CNT network with huge potential for use in the electronics and aerospace industries.

The photodegradation kinetics of 2-mercaptobenzothiazole (MBT), a corrosion inhibitor for copper-based alloys, is studied in high amorphous polyvinyl alcohol coatings subjected to either UV irradiation or indoor light exposure. The photodegradation process proceeds rapidly, thus compromising the anticorrosion ability of the coating. The encapsulation of MBT into layered double hydroxide (LDH) nanocarriers slows down its decomposition kinetics by a factor of three. Besides preserving the corrosion inhibitor, such a strategy allows a controlled release of MBT triggered by corrosion-related stimuli, for example, presence of chloride species and acid pH. The developed coating guarantees long-lasting corrosion protection even at low amounts of inhibitor-loaded LDH nanocarriers (ca. 5 wt %). This also reflects in a high transparency, which makes the protective coating suitable for demanding applications, such as the conservation of high-value metal works of art., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Chitosan (CS) is one of the most promising polymers due to its biocompatibility, biodegradability, and natural abundance. However, its poor mechanical and barrier properties make it difficult to satisfy a wide range of applications. Herein, borate ions, originating from the hydrolysis of sodium tetraborate decahydrate (borax), have been used to crosslink chitosan and graphene oxide (GO) nanocomposites. Chitosan films consisting of 1.0 wt% boron and 1.0 wt% GO exhibit a significant improvement in both the toughness and oxygen barrier properties compared to pristine chitosan. In particular the tensile strength of the samples after thermal treatment increases by ∼160% compared to pristine chitosan, whereas their oxygen permeability reduces by ∼90%. This is ascribed to the chemical crosslinking between chitosan and GO nanoplatelets through borate ions, as well as the formation of a layered morphology with graphene nanoplatelets oriented parallel to the sample surface. The exceptional robust and high gas barrier film has promising application in the packaging industry. The borate-crosslinking chemistry represents the potential strategy for improving properties of other polymer nanocomposites.

Gas-barrier materials obtained by coating poly(ethylene terephthalate) (PET) substrates have already been studied in the recent literature. However, because of the benefits of using cheaper, biodegradable, and nonpolar polymers, multilayered hybrid coatings consisting of alternate layers of reduced graphene oxide (rGO) nanosheets and a novel high amorphous vinyl alcohol (HAVOH) with zirconium (Zr) adducts as binders were successfully fabricated through a layer-by-layer (LbL) assembly approach. Atomic force microscopy analysis showed that rGO nanoplatelets were uniformly dispersed over the HAVOH polymer substrate. Scanning and transmission electron microscopies revealed that multilayer (HAVOH/Zr/rGO)n hybrid coatings exhibited a brick-wall structure with HAVOH and rGO as buildings blocks. It has been shown that 40 layers of HAVOH/Zr/rGO ultrathin films deposited on PET substrates lead to a decrease of 1 order of magnitude of oxygen permeability with respect to the pristine PET substrate. This is attributed to the effect of zirconium polymeric adducts, which enhance the assembling efficiency of rGO and compact the layers, as confirmed by NMR characterization, resulting in a significant increment of the oxygen-transport pathways. Because of their high barrier properties and high flexibility, these films are promising candidates in a variety of applications such as packaging, selective gas films, and protection of flexible electronics.

Self-assembling of reduced graphene oxide platelets, as a tailored interconnected network within a natural rubber matrix, is proposed as a mean for obtaining nanocomposites with improved gas barrier, as compared to neat natural rubber. Interestingly, this nanocomposite structure results to be much more effective than homogeneous dispersion of graphene platelike particles, even at low graphene loadings. Such behavior is interpreted on the grounds of a theoretical model describing permeability of heterogeneous systems specifically accounting for self-segregated graphene morphology.

Multifunctional bionanocomposites have been prepared by loading chitosan matrix with silver-montmorillonite antimicrobial nanoparticles obtained by replacing Na(+) ions of natural montmorillonite with silver ions. This filler has been chosen for its twofold advantage to serve as silver supporting material and to confer new and better performance to the obtained material. It has been proved that the achievement of the intercalation of chitosan into the silicate galleries of montomorillonite as well as the interaction between chitosan and Ag ions and silver particles lead to an enhancement of the thermal stability, to an improvement of mechanical strengths and to a reduction of the liquid water uptake of the obtained bionanocomposites. Results also show that silver ions are released in a steady and prolonged manner providing, after 24 h, a significant reduction in the microbial growth of Pseudomonas spp., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

The demand for natural antioxidant active packaging is increasing due to its unquestionable advantages compared with the addition of antioxidants directly to the food. Therefore, the search for antioxidants perceived as natural, namely those that naturally occur in herbs and spices, is a field attracting great interest. In line with this, in the last few years, natural antioxidants such as α-tocopherol, caffeic acid, catechin, quercetin, carvacrol and plant extracts (e.g. rosemary extract) have been incorporated into food packaging. On the other hand, consumers and the food industry are also interested in active biodegradable/compostable packaging and edible films to reduce environmental impact, minimise food loss and minimise contaminants from industrial production and reutilisation by-products. The present review focuses on the natural antioxidants already applied in active food packaging, and it reviews the methods used to determine the oxidation protection effect of antioxidant active films and the methods used to quantify natural antioxidants in food matrices or food simulants. Lastly consumers' demands and industry trends are also addressed.

A multilayer photoactive coating containing surface fluorinated TiO(2) nanoparticles and hybrid matrices by sol gel approach based on renewable chitosan was applied on poly(lactic acid) (PLA) film by a step wise spin-coating method. The upper photoactive layer contains nano-sized functionalized TiO(2) particles dispersed in a siloxane based matrix. For the purpose of improving TiO(2) dispersion at the air interface coating surface, TiO(2) nanoparticles were modified by silane coupling agent 1H,1H,2H,2H-perfluorooctyltriethoxysilane (FTS) with fluoro-organic side chains. An additional hybrid material consisting of chitosan (CS) cross-linked with 3-glycidyloxypropyl trimethoxy silane (GOTMS) was applied as interlayer between the PLA substrate and the upper photoactive coating to increase the adhesion and reciprocal affinity. The multilayer TiO(2)/CS-GOTMS coatings on PLA films showed a thickness of ~4-6 μm and resulted highly transparent. Their structure was exhaustively characterized by SEM, optical microscope, UV-vis spectroscopy and contact angle measurements. The photocatalytic activity of the multilayer coatings were investigated using methyl orange (MeO) as a target pollutant; the results showed that PLA films coated with surface fluorinated particles exhibit higher activity than films with neat particles, because of a better dispersion of TiO(2) particles. The mechanical properties of PLA and films coated with fluorinated particles, irradiated by UV light were also investigated; the results showed that the degradation of PLA substrate was markedly suppressed because of the UV adsorptive action of the multilayer coating., (© 2011 American Chemical Society)

The aim of this study was to evaluate the effects of a bio-based coating containing silver-montmorillonite nanoparticles combined with modified-atmosphere packaging (MAP) on microbial and sensory quality decay of Fior di latte cheese. Different concentrations of silver nanoparticles (0.25, 0.50, and 1.00 mg/mL) were dispersed in a sodium alginic acid solution (8% wt/vol) before coating the cheese. Modified-atmosphere packaging was made up of 30% CO(2), 5% O(2), and 65% N(2). The combination of silver-based nanocomposite coating and MAP enhanced Fior di latte cheese shelf life. In particular, product stored in the traditional packaging showed a shelf life of about 3 d, whereas coated cheese stored under MAP reached a shelf life of more than 5 d, regardless of the concentration of silver nanoparticles. The synergistic effects between antimicrobial nanoparticles and initial headspace conditions in the package could allow diffusion of dairy products beyond the local area., (Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.)

In this work, silver-montmorillonite (Ag-MMT) antimicrobial nanoparticles have been obtained by allowing silver ions from nitrate solutions to replace the Na(+) of natural montmorillonite and then to be reduced by a thermal treatment. Ag-MMT were used as active antimicrobial compounds to improve the shelf life of fresh fruit salad. In order to assess their influence on product shelf life, sensorial and microbiological quality has been monitored during the storage. The microbiological quality was determined by monitoring the principal spoilage microorganisms (mesophilic and psychrotrophic bacteria, coliforms, lactic acid bacteria, yeasts and molds). Additionally, the evolution of sensorial quality was assessed by monitoring color, odor, firmness and product overall quality. The Ag-MMT nanoparticles seemed to be effective in inhibiting microbial growth, above all at the highest tested concentration. Consequently, the sensorial quality of samples stored in the active packaging appeared to be better preserved. Thus, experimental results showed that a significant shelf life prolongation of fresh fruit salad can be obtained by a straightforward new packaging system., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The objective of this work was to evaluate the effectiveness of an antimicrobial packaging system containing active nanoparticles on the quality deterioration of Fior di Latte cheese. To this aim, 3 concentrations of silver montmorillonite embedded in agar were used. The cell loads of spoilage and useful microorganisms were monitored during a refrigerated storage period. Moreover, cheese sensory quality (i.e., odor, color, consistency, and overall quality) was evaluated by means of a panel test. Results showed that the active packaging system markedly increased the shelf life of Fior di Latte cheese, due to the ability of silver cations to control microbial proliferation, without affecting the functional dairy microbiota and the sensory characteristics of the product. The active packaging system developed in this work could be used to prolong the shelf life of Fior di Latte and boost its distribution beyond local market borders., (Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.)

Silver-montmorillonite (Ag-MMT) antimicrobial nanoparticles were obtained by allowing silver ions from nitrate solutions to replace the Na(+) of natural montmorillonite and to be reduced by thermal treatment. The Ag-MMT nanoparticles were embedded in agar, zein, and poly(ε-caprolactone) polymer matrices. These nanocomposites were tested in vitro with a three-strain cocktail of Pseudomonas spp. to assess antimicrobial effectiveness. The results indicate that Ag-MMT nanoparticles embedded into agar may have antimicrobial activity against selected spoilage microorganisms. No antimicrobial effects were recorded with active zein and poly(ε-caprolactone). The water content of the polymeric matrix was the key parameter associated with antimicrobial effectiveness of this active system intended for food packaging applications.

In this study we tested the antimicrobial activity of polyethylene films modified by means of plasma processes that were followed by the chemical immobilization of lysozyme, an antimicrobial enzyme. To chemically immobilize the enzyme in its active form at the surface of polyethylene, substrates that had been plasma treated under different experimental conditions were soaked in lysozyme solutions at different concentrations. The immobilization of the enzyme was checked, and the antimicrobial activity of the films was investigated by observing the death rate of Micrococcus lysodeikticus cells suspended in phosphate buffer in contact with the films. The results clearly indicate that plasma-treated films loaded with lysozyme are active against the selected microorganism. A modified version of the Gompertz equation was used to quantitatively valuate the dependence of the antimicrobial activity of the films under both plasma treatment conditions and lysozyme concentrations.

A new technique for the immobilization of lysozyme onto the surface of polyvinylalcohol films is presented. The active compound was sprayed along with a suitable bonding agent onto the surface of the cross-linked polymeric matrix. Active compound release tests determined the amount of lysozyme immobilized on the film surface. With the use of Micrococcus lysodeikticus, the antimicrobial activity of the films was determined and the results correlated with the amount of immobilized lysozyme. This new technique was effective for immobilizing the enzyme, and the developed films were active against the test microorganism. Results were compared with those obtained with a different immobilizing technique, in which the active compound was bound into the bulk of the polymeric film. As expected, the surface-immobilized lysozyme films have a higher antimicrobial activity than bulk-bound films.

The suitability of antimicrobial release films made from highly swellable polymers for use in food packaging was evaluated. The possibility of modulating the release kinetics of active compounds either by regulating the degree of cross-link of the polymer matrix or by using multilayer structures was addressed. The release kinetics of lysozyme, nisin, and sodium benzoate (active compounds with different molecular weights) were determined at ambient temperature (25 degrees C). The effectiveness of the proposed active films in inhibiting microbial growth was addressed by determining the antimicrobial efficiency of the released active compounds. Micrococcus lysodeikticus, Alicyclobacillus acidoterrestris, and Saccharomyces cerevisiae were used to test the antimicrobial efficiency of released lysozyme, nisin, and sodium benzoate, respectively. Results indicate that the release kinetics of both lysozyme and nisin can be modulated through the degree of cross-link of the polymer matrix, whereas multilayer structures need to be used to control the release kinetics of sodium benzoate. All the active compounds released from the investigated active films were effective in inhibiting microbial growth.

A mathematical model able to describe the release kinetics of antimicrobial agents from crosslinked polyvinylalcohol (PVOH) into water is presented. The model was developed by taking into account the diffusion of water molecules into the polymeric film, the counter-diffusion of the incorporated antimicrobial agent from the film into water, and the polymeric matrix swelling kinetic. To validate the model the water sorption kinetics as well as the release kinetics of three antimicrobial agents (i.e., lysozyme, nisin and sodium benzoate, all approved to be used in contact with food) were determined at ambient temperature (25 degrees C). The three investigated active agents were entrapped in four films of PVOH with a different degree of crosslink. The model was successfully used to fit all the above sets of data, corroborating the validity of the hypothesis made to derive it.