Search

A midrotation commercial thinning experiment conducted in two independent spruce plantations compared several tree selection strategies as both early (age 19 or 24 years) single and double (again at age 30 or 34 years) entries over a 16 year period. A delayed (age 30 or 32 years) single-entry thinning and unthinned portions of the plantations served as references for the other treatments. With the exception of 50% systematic row thinnings, removal intensities were held relatively constant at about 40% of stand basal area. All of the thinning treatments satisfied the objectives of focusing diameter and volume growth on a reduced number of stems and making merchantable volume available during the rotation. Early single-entry thinning allowed 30–50 m3/ha to be harvested, increasing quadratic mean diameter and mean merchantable volume per stem at the end of the observation period by 10% and 24%, respectively, over unthinned stands. A second thinning removed an additional 48–64 m3/ha and increased diameter and volume gains to 25% and 71%, respectively. Only marginal differences were observed between the tree-selection strategies, and there were no overall gross total or gross merchantable volume gains or losses associated any of the thinning treatments relative to the unthinned plantations. [ABSTRACT FROM AUTHOR]

This study explores how data from a handheld mobile laser scanning (MLS) system and quantitative structural models (QSM) can be used to estimate tree structural attributes. Four MLS acquisition scenarios were investigated in a 1 ha temperate hardwood stand, including 15 and 35 m parallel lines, nine circular plots, and a 20 m × 20 m grid. Results were compared against terrestrial laser scanning and destructive field measurements. All acquisition scenarios yielded comparable results, except for the 35 m scenario, which showed greater variability. The 20 m × 20 m grid scenario showed the highest accuracy, with an RMSE of 0.41 m (2.07%) for tree height, 3.98 cm (14.93%) for diameter at breast height, 0.21 m³ (19.28%) for merchantable wood volume, and 0.07 m³ (10.11%) for merchantable stem volume. A bias < 5% was observed for these key attributes, except for an 11.68% bias in merchantable wood volume. Overestimation of branch volume was identified as the primary source of bias related to merchantable wood volume. This study highlights MLS's potential for accurate, non-destructive estimation of tree structural attributes, while pointing out the need to refine noise removal and to assess the most suitable acquisition scenarios for various forest types. [ABSTRACT FROM AUTHOR]

The emergence of mobile laser scanning (MLS) systems that use simultaneous localization and mapping (SLAM) technology to map their environment opens up new opportunities for characterizing forest structure. The speed and accuracy of data acquisition makes them particularly adapted to operational inventories. MLS also shows great potential for estimating inventory attributes that are difficult to measure in the field, such as wood volume or crown dimensions. Hardwood species represent a significant challenge for wood volume estimation compared to softwoods because a substantial portion of the volume is included in the crown, making them more prone to allometric bias and more complex to model. This study assessed the potential of MLS data to estimate tree structural attributes in a temperate hardwood stand: height, crown dimensions, diameter at breast height (DBH), and merchantable wood volume. Merchantable wood volume estimates were evaluated to the third branching order using the quantitative structural modeling (QSM) approach. Destructive field measurements and terrestrial laser scanning (TLS) data of 26 hardwood trees were used as reference to quantify errors on wood volume and inventory attribute estimations from MLS data. Results reveal that SLAM-based MLS systems provided accurate estimates of tree height (RMSE = 0.42 m (1.78%), R2 = 0.93), crown projected area (RMSE = 3.23 m2 (5.75%), R2 = 0.99), crown volume (RMSE = 71.4 m3 (23.38%), R2 = 0.99), DBH (RMSE = 1.21 cm (3.07%), R2 = 0.99), and merchantable wood volume (RMSE = 0.39 m3 (18.57%), R2 = 0.95), when compared to TLS. They also estimated operational merchantable volume with good accuracy (RMSE = 0.42 m3 (21.82%), R2 = 0.94) compared to destructive measurements. Finally, the merchantable stem volume derived from MLS data was estimated with high accuracy compared to TLS (RMSE = 0.11 m3 (8.32%), R2 = 0.96) and regional stem taper models (RMSE = 0.16 m3 (14.7%), R2 = 0.93). We expect our results would provide a better understanding of the potential of SLAM-based MLS systems to support in-situ forest inventory. [ABSTRACT FROM AUTHOR]

The recruitment of saplings in forest stands into merchantable stems is a very complex process, thus making it challenging to understand and predict. The dynamics of recruitment in the Acadian Forest Region of New Brunswick are not well known or well documented. Our objective was to garner information from existing large-scale routine forest inventories regarding the different dynamics behind the recruitment from the sapling layer into the commercial tree size layer. We focused on the density and occurrence of sugar maple (Acer saccharum Marsh.) and yellow birch (Betula alleghaniensis Britt.) following harvesting, by looking at many factors on a wide range of spatial and temporal scales using models. The results suggest that the variation in density and probability of occurrence is best explained by the intensity of silvicultural treatment, by the merchantable stem density in each plot, and by the proportion of merchantable basal area of each group of species. The number of recruits of sugar maple and yellow birch stems tend be higher when time since last treatment increases, when mid to low levels of silvicultural treatment intensity were implemented, and within plots having intermediate levels of merchantable stem density. Lastly, our modeling efforts suggest that the probability of occurrence and density of recruitment of both species tend to increase while its share of merchantable basal area increases. [ABSTRACT FROM AUTHOR]

Sustainable forest management relies on practices ensuring vigorous post-harvest regeneration. Data on regeneration structure and composition are often collected through intensive field surveys. Remote sensing technologies (e.g., Light Detection and Ranging (LiDAR), satellite imagery) can cover a much larger spatial extent, but their ability to estimate regeneration characteristics is often challenged by the obstruction associated with canopy foliage. Here, we determined whether the integration of LiDAR and Sentinel-2 images can increase the accuracy of sapling density estimates and whether this accuracy decreased with canopy cover in the Acadian forest of New Brunswick, Canada. Using random forest regression, we compared the accuracy of three models (LiDAR and Sentinel-2 images alone or combined) to estimate sapling density for two species groups: saplings of all species or commercial species only. The integration of both sensors did not increase the accuracy of sapling density estimates, nor did it reduce the negative influence of canopy cover for either species group compared to LiDAR, but it increased the accuracy by approximately 15% relative to Sentinel-2 images. Under very high canopy cover, the accuracy of density estimates for all species combined was significantly lower with Sentinel-2 images only. We recommend using LiDAR and high-resolution satellite images acquired in the fall to obtain more accurate estimates of sapling density. [ABSTRACT FROM AUTHOR]

Northern hardwood species display a variety of forms and defects that can reduce stem quality and complicate their timber management. However, for the most part, growth and yield models do not account for the influence of stem form and damage. This study determined the influence of stem form and damage on growth, survival, and projected future sawlog value among several northern commercial hardwood species. To accomplish this, hardwood trees on 112 permanent plots across three long-term research sites in Maine were assigned stem form and risk classes using a tree classification system developed in New Brunswick. A highly significant influence of stem form and risk on annualized individual-tree diameter increment and survival was found. Inclusion of these equations into a regional growth and yield model highlighted the importance of stem form and defects on long-term simulations as projected stand-level future value was significantly reduced by over 17%, on average (range of 13% to 28%), when compared with projections that did not include that tree-level information. The results highlight the importance of stem form and defects, as well as the need to account for them, in growth and yield applications that assess the forecasted value of commercially important hardwood stands. [ABSTRACT FROM AUTHOR]

In northern hardwood forests, light availability is considered to be the main factor limiting seedling and sapling growth. However, field measurement of this variable is time-consuming. To address this issue, we developed random forest regression models to estimate canopy cover from a Landsat 8 OLI image of a northern hardwood forest in northwestern New Brunswick, Canada. We then assessed the accuracy of model predictions with a canopy height model (CHM) derived from LiDAR data. We selected 2 threshold heights (1.3 and 5 m) to distinguish the understory from the overstory and to determine the impact of the understory on top-of-canopy reflectance. Our results show that the understory influenced top-of-canopy reflectance and that a 1.3 m height threshold provided the most accurate estimation of canopy cover. In contrast with studies conducted in softwood stands, we found no evidence that the shortwave infrared (SWIR1) band decreased the influence of the understory on top-of-canopy reflectance. In northern hardwood forests, the estimation of canopy characteristics, such as canopy cover and leaf area index, should be focused on the green band, as it was least influenced by understory vegetation. [ABSTRACT FROM AUTHOR]

Northern hardwood trees display a wide variety of stem forms and defects, which can substantially reduce their financial value and also complicate their silviculture. While attributes of stem form and defect have been incorporated into tree classification systems, their ability to assess product value and recovery in standing trees has not been adequately tested. To address this issue, we classified stem form and risk using a system developed by the Northern Hardwoods Research Institute (NHRI) for four species across several locations in Maine, New Hampshire, and New Brunswick: sugar maple ( Acer saccharum Marsh.), red maple ( Acer rubrum L.), yellow birch ( Betula alleghaniensis Britton), and northern red oak ( Quercus rubra L.). Using these data, we ( i) quantified interspecific and regional variation in stem form and damage, ( ii) related potential sawlog recovery to tree size, form, and risk, and ( iii) compared the efficacy of the NHRI system with a commonly used classification system and a continuous measure of stem quality. High variation in both stem form and damage among the species was found, with red maple showing the largest range. A simplified NHRI system including three form classes proved to be sufficient in differentiating sawlog potential in individual trees, while a model using a continuous measure of stem quality (estimated merchantable sawlog height) performed best. [ABSTRACT FROM AUTHOR]

UAV laser scanning (ULS) has the potential to support forest operations since it provides high-density data with flexible operational conditions. This study examined the use of ULS systems to estimate several tree attributes from an uneven-aged northern hardwood stand. We investigated: (1) the transferability of raster-based and bottom-up point cloud-based individual tree detection (ITD) algorithms to ULS data; and (2) automated approaches to the retrieval of tree-level (i.e., height, crown diameter (CD), DBH) and stand-level (i.e., tree count, basal area (BA), DBH-distribution) forest inventory attributes. These objectives were studied under leaf-on and leaf-off canopy conditions. Results achieved from ULS data were cross-compared with ALS and TLS to better understand the potential and challenges faced by different laser scanning systems and methodological approaches in hardwood forest environments. The best results that characterized individual trees from ULS data were achieved under leaf-off conditions using a point cloud-based bottom-up ITD. The latter outperformed the raster-based ITD, improving the accuracy of tree detection (from 50% to 71%), crown delineation (from R2 = 0.29 to R2 = 0.61), and prediction of tree DBH (from R2 = 0.36 to R2 = 0.67), when compared with values that were estimated from reference TLS data. Major improvements were observed for the detection of trees in the lower canopy layer (from 9% with raster-based ITD to 51% with point cloud-based ITD) and in the intermediate canopy layer (from 24% with raster-based ITD to 59% with point cloud-based ITD). Under leaf-on conditions, LiDAR data from aerial systems include substantial signal occlusion incurred by the upper canopy. Under these conditions, the raster-based ITD was unable to detect low-level canopy trees (from 5% to 15% of trees detected from lower and intermediate canopy layers, respectively), resulting in a tree detection rate of about 40% for both ULS and ALS data. The cylinder-fitting method used to estimate tree DBH under leaf-off conditions did not meet inventory standards when compared to TLS DBH, resulting in RMSE = 7.4 cm, Bias = 3.1 cm, and R2 = 0.75. Yet, it yielded more accurate estimates of the BA (+3.5%) and DBH-distribution of the stand than did allometric models −12.9%), when compared with in situ field measurements. Results suggest that the use of bottom-up ITD on high-density ULS data from leaf-off hardwood forest leads to promising results when estimating trees and stand attributes, which opens up new possibilities for supporting forest inventories and operations. [ABSTRACT FROM AUTHOR]

Digital aerial photogrammetric (DAP) techniques applied to unmanned aerial system (UAS) acquired imagery have the potential to offer timely and affordable data for monitoring and updating forest inventories. Development of methods for individual tree crown detection (ITCD) and delineation enables the development of individual tree-based, rather than stand based inventories, which are important for harvesting operations, biomass and carbon stock estimations, forest damage assessment, and forest monitoring in mixed species stands. To achieve these inventory goals, consistent and robust DAP estimates are required over time. Currently, the influence of seasonal changes in deciduous tree structure on the consistency of DAP point clouds, from which tree-based inventories can be derived, is unknown. In this study, we investigate the influence of the timing of DAP acquisition on ITCD accuracies and estimation of tree attributes for a deciduous-dominated forest stand in New Brunswick, Canada. UAS imagery was acquired five times between June and September 2017 over the same stand and consistently processed into DAP point clouds. Airborne laser scanning (ALS) data, acquired the same year, was used to reconstruct a digital terrain model (DTM) and served as a reference for UAS-DAP-based ITCD. Marker-controlled watershed segmentation (MCWS) was used to delineate individual tree crowns. Accuracy index percentages between 55% (July 25) and 77.1% (September 22) were achieved. Omission errors were found to be relatively high for the first three DAP acquisitions (June 7, July 5, and July 25) and decreased gradually thereafter. The commission error was relatively high on July 25. Point cloud metrics were found to be predominantly consistent over the 4-month period, however, estimated tree heights gradually decreased over time, suggesting a trade-off between ITCD accuracies and measured tree heights. Our findings provide insight into the potential influence of seasonality on DAP-ITCD approaches to derive individual tree inventories. [ABSTRACT FROM AUTHOR]

Digital aerial photogrammetry (DAP) and unmanned aerial systems (UAS) have emerged as synergistic technologies capable of enhancing forest inventory information. A known limitation of DAP technology is its ability to derive terrain surfaces in areas with moderate to high vegetation coverage. In this study, we sought to investigate the influence of flight acquisition timing on the accuracy and coverage of digital terrain models (DTM) in a low cover forest area in New Brunswick, Canada. To do so, a multi-temporal UAS-acquired DAP data set was used. Acquired imagery was photogrammetrically processed to produce high quality DAP point clouds, from which DTMs were derived. Individual DTMs were evaluated for error using an airborne laser scanning (ALS)-derived DTM as a reference. Unobstructed road areas were used to validate DAP DTM error. Generalized additive mixed models (GAMM) were generated to assess the significance of acquisition timing on mean vegetation cover, DTM error, and proportional DAP coverage. GAMM models for mean vegetation cover and DTM error were found to be significantly influenced by acquisition date. A best available terrain pixel (BATP) compositing exercise was conducted to generate a best possible UAS DAP-derived DTM and outline the importance of flight acquisition timing. The BATP DTM yielded a mean error of −0.01 m. This study helps to show that the timing of DAP acquisitions can influence the accuracy and coverage of DTMs in low cover vegetation areas. These findings provide insight to improve future data set quality and provide a means for managers to cost-effectively derive high accuracy terrain models post-management activity. [ABSTRACT FROM AUTHOR]