Search

In this article, the impacts of the off-state gate bias (VGS,OFF) on dynamic on-resistance (RON) are systematically investigated in commercial Schottky-type p-GaN Gate high-electron-mobility transistors. Double-pulse tester and pulsed I–V system are adopted to evaluate the dynamic RON with various off-state gate and drain bias (VDS,OFF) under hard- and soft-switching conditions. More negative VGS,OFF can aggravate the dynamic RON degradation under both soft- and hard-switching, especially when switching with a high VDS,OFF. The impacts of VGS,OFF on switching transients and off-state stress are investigated separately to reveal the underlying mechanisms, which are found to be associated with the generation and movements of holes. The off-state gate bias of the voltage-driving scheme needs to be carefully considered according to the identified mechanisms in terms of dynamic on-resistance degradation. [ABSTRACT FROM AUTHOR]

In a ${p}$ -channel field-effect-transistor (${p}$ -FET) bridge HEMT device recently realized on a commercial ${p}$ -GaN/AlGaN/GaN-on-Si power HEMT epi-wafer, it is revealed that the device’s reverse-conduction turn-on voltage (${V}_{\text {RT}}$) can be effectively decoupled from the forward threshold voltage (${V}_{\text {TH}}$) of Schottky-type ${p}$ -GaN gate HEMTs. Unlike the conventional Schottky-type ${p}$ -GaN gate HEMTs, of which ${V}_{\text {RT}}$ is closely linked to ${V}_{\text {TH}}$ , the ${p}$ -FET-bridge HEMT enables separate designs of ${V}_{\text {RT}}$ and $V_{\text {TH}}$ so that low-loss reverse conduction and high threshold voltage can be simultaneously realized. In addition, ${V}_{\text {RT}}$ can be further reduced by engineering the AlGaN barrier layer, which will also benefit a lower channel sheet resistance without lowering ${V}_{\text {TH}}$. [ABSTRACT FROM AUTHOR]

In this work, we study the gate leakage mechanisms of E-mode p-n junction/AlGaN/GaN (PNJ) high electron mobility transistors (HEMTs), which have been shown to deliver low gate leakage and wide safe operating gate-bias range. The intrinsic gate leakage through the PNJ-gate was found to be limited by the transport of holes through the p-GaN layer, which occurs via Poole-Frenkel emission and phonon-assisted tunneling in low and high gate bias region, respectively. In addition, lateral leakage current and the role of variable hopping process (VRH) are also discussed. Gate leakage current models based on the revealed mechanisms can quantitatively reproduce the gate-leakage behavior in the entire relevant range of gate biases and temperatures. [ABSTRACT FROM AUTHOR]

When the gated channel region of a GaN high-electron-mobility transistor (HEMT) is configured into multiple sub-channels in parallel and separated by embedded isolating patterns, the effective resistance of the access regions could be reduced, and consequently, the knee voltage (${V}_{{\text {K}}}$) of the transistor could be lowered. In this work, each sub-channel is defined as a convergent funnel-like shape, with its width gradually shrunk from the source side to the drain side. Different from conventional channels with uniform width under the entire gate, the funnel-shaped channel could converge electrons as they transport from source side to drain side, which facilitates electrons’ acceleration toward saturation velocity under a smaller drain-to-source bias, leading to a reduced intrinsic ${V}_{{\text {K}}}$ in the gated channel. Thus, more desirable ${I}$ - ${V}$ characteristics and more balanced performance enhancement in RF linearity and power added efficiency are achieved at a low supply voltage, making the convergent-channel HEMT attractive for power amplifiers in mobile terminals. [ABSTRACT FROM AUTHOR]

In this work, we demonstrate a GaN-based $\textit {p-n}$ junction gate (PNJ) HEMT featuring an ${n}$ -GaN/ ${p}$ -GaN/AlGaN/GaN gate stack. Compared to the more conventional ${p}$ -GaN gate HEMT with a Schottky junction between the gate metal and ${p}$ -GaN layer, the $\textit {p-n}$ junction can withstand higher reverse bias at the same peak electric-field as the depletion region extends to both the ${n}$ -side and ${p}$ -side, while exhibiting lower leakage current. The PNJ-HEMT shows a positive threshold voltage (${V}_{\text {TH}}$) of 1.78 V, a small gate leakage $(\sim 10^{-3}$ mA/mm @ ${V}_{\text {GS}} = {10}\,\, \text {V}$). In particular, a large forward gate breakdown voltage of 19.35 V at 25 °C and 19.70 V at 200 °C was achieved with the PNJ-gate HEMT. [ABSTRACT FROM AUTHOR]

In this paper, systematic characterization and the corresponding suppression strategies of dynamic OFF-state leakage current (${I}_{ \mathrm{\scriptscriptstyle OFF}}$) in Schottky-type p-GaN gate high-electron-mobility transistors (HEMTs) are presented based on fast pulsed ${I}$ – ${V}$ measurement and consecutive switching measurement. It is found that the high ${I}_{ \mathrm{\scriptscriptstyle OFF}}$ under dynamic pulse mode without hole injection is a result of the reduced voltage blocking capabilities (both lateral and vertical) with weaker trapping effect in the buffer, and the dynamic ${I}_{ \mathrm{\scriptscriptstyle OFF}}$ induced by ON-state hole injection is caused by further increased lateral conductivity through the buffer from source to drain. The corresponding behaviors under continuous waveforms with different switching conditions are analyzed to identify effective approaches for the suppression of dynamic ${I}_{ \mathrm{\scriptscriptstyle OFF}}$ in practical switching operations. A higher temperature is shown to be beneficial to the reduction of the dynamic ${I}_{ \mathrm{\scriptscriptstyle OFF}}$ induced by ON-state hole injection. To completely eliminate the dynamic ${I}_{ \mathrm{\scriptscriptstyle OFF}}$ caused by ON-state hole injection and minimize the OFF-state power consumption in practical power switching applications, a sufficiently large negative OFF-state gate bias (e.g., ${V}_{\text {GS}, \mathrm{\scriptscriptstyle OFF}}\le -{3}$ V) is recommended in the gate driver turn-off voltage design for the Schottky-type p-GaN gate HEMTs. [ABSTRACT FROM AUTHOR]

An MOS field plate-protected Schottky-drain (gated Schottky-drain) is successfully integrated on a double-channel AlGaN/GaN MOS-HEMT to provide reverse blocking capability. The leakage suppression MOS field plate is deployed on the etched upper GaN channel layer after a barrier fully recess process, leading to a low reverse OFF-state leakage current of −20 nA/mm (at −100 V). The drain metal is deployed adjacent to the MOS field plate, contacting the upper MOS-channel and lower heterojunction channel from the sidewall. A metal-2DEG Schottky contact with a low turn-ON voltage of 0.5 V is achieved. Since the lower channel (below the MOS field plate) is separated from the etched surface of upper GaN channel layer, a high-conductivity MOS-gated channel with a sheet resistance of 806 $\Omega$ /Square is obtained. The device exhibits a threshold voltage of +0.6 V (at $10~\mu \text{A}$ /mm and +1.9 V from linear extrapolation) and an ON-resistance of ~18 $\Omega {\cdot} \text {mm}$. Besides, a high forward (and reverse) breakdown voltage of 790 V (and −656 V, all at $10~\mu \text{A}$ /mm) is achieved. [ABSTRACT FROM AUTHOR]

In this letter, we demonstrate an integrated process that illustrates the compatibility of AlN/SiNx passivation with high-performance (i.e. low leakage and high breakdown) low-pressure chemical vapor deposition (LPCVD) SiNx gate dielectric for GaN-based MIS-HEMT. It is shown that the AlN/SiNx passivation structure maintains its superior capability of suppressing the current collapse after enduring high temperature of 780 °C during the LPCVD-SiNx deposition. The AlN/SiNx passivation is shown to be significantly better than the LPCVD-SiNx passivation by delivering small dynamic $R_{{\mathrm{\scriptscriptstyle ON}}}$ degradation, especially under high drain bias switching with $V_{{\mathrm{DS}}} > 100$ V. [ABSTRACT FROM PUBLISHER]

In this letter, silicon nitride (SiNx) film deposited at 780 °C by low-pressure chemical vapor deposition (LPCVD) was employed as gate dielectric for GaN-based metal–insulator–semiconductor high-electron-mobility transistors. The LPCVD-SiNx exhibit improved gate dielectric performance than the plasma enhanced chemical vapor deposition-SiNx, including smaller forward and reverse gate leakage, and higher forward gate breakdown voltage. [ABSTRACT FROM AUTHOR]