Search

In this work, the design of a microfluidic paper-based analytical device (μPAD) for the quantification of nitrate in urine samples was described. Nitrate monitoring is highly relevant due to its association to some diseases and health conditions. The nitrate determination was achieved by combining the selectivity of the nitrate reductase enzymatic reaction with the colorimetric detection of nitrite by the well-known Griess reagent. For the optimization of the nitrate determination μPAD, several variables associated with the design and construction of the device were studied. Furthermore, the interference of the urine matrix was evaluated, and stability studies were performed, under different conditions. The developed μPAD enabled us to obtain a limit of detection of 0.04 mM, a limit of quantification of 0.14 mM and a dynamic concentration range of 0.14–1.0 mM. The designed μPAD proved to be stable for 24 h when stored at room temperature in air or vacuum atmosphere, and 60 days when stored in vacuum at −20 °C. The accuracy of the nitrate μPAD measurements was confirmed by analyzing four certified samples (prepared in synthetic urine) and performing recovery studies using urine samples.

As a crucial biomarker for some diseases, the determination of cholesterol in human serum is of great significance for the diagnosis and prevention of these diseases. Hence, a portable cholesterol detection method is necessary for clinical and domestic applications. Here, a portable paper sensor was designed for cholesterol detection by modifying screen-printed electrode (SPE) with nanoporous gold (NPG). To achieve the reliable cholesterol detection, a synergistic strategy was proposed based on the oxidation of cholesterol by cholesterol oxidase (ChOx) and the reduction of oxidation product (H2O2) by NPG. Compared to existing electrochemical sensors, the resulting paper sensor exhibited a wider linear response in a range from 50 μM to 6 mM as well as a higher sensitivity of 32.68 μA mM−1 cm−2 with a lower detection limit of 8.36 μM. Moreover, the portable paper sensor presented strong anti-interference capability and stability in the detection of cholesterol in human serum, and the data detected by the portable paper sensor were consistent with that obtained by an automatic biochemical analyzer. These unique performances confirmed that the proposed paper sensor was a sensitive, reliable, and portable cholesterol detection method, making it a good choice for cholesterol detection.

Timely and rapid detection of biomarkers is extremely important for the diagnosis and treatment of diseases. However, going to the hospital to test biomarkers is the most common way. People need to spend a lot of money and time on various tests for potential disease detection. To make the detection more convenient and affordable, we propose a paper-based aptasensor platform in this work. This device is based on a cellulose paper, on which a three-electrode system and microfluidic channels are fabricated. Meanwhile, novel nanomaterials consisting of amino redox graphene/thionine/streptavidin-modified gold nanoparticles/chitosan are synthesized and modified on the working electrode of the device. Through the biotin-streptavidin system, the aptamer whose 5'end is modified with biotin can be firmly immobilized on the electrode. The detection principle is that the current generated by the nanomaterials decreases proportionally to the concentration of targets owing to the combination of the biomarker and its aptamer. 17β-Estradiol (17β-E2), as one of the widely used diagnostic biomarkers of various clinical conditions, is adopted for verifying the performance of the platform. The experimental results demonstrated that this device enables the determination of 17β-E2 in a wide linear range of concentrations of 10 pg mL-1 to 100 ng mL-1 and the limit of detection is 10 pg mL-1 (S/N = 3). Moreover, it enables the detection of targets in clinical serum samples, demonstrating its potential to be a disposable and convenient integrated platform for detecting various biomarkers.

In this work, we fabricated a novel origami paper-based analytical device (oPAD) assisted by the nanostructuring effect of in situ Pd decoration of Cu/Co-doped CeO2 (CuCo-CeO2-Pd) nanospheres, functionalized with their strongly enhanced electrocatalytic properties to realize an electrochemical and visual signal readout system in oPAD, for highly sensitive detection of amyloid-β (Aβ). The CuCo-CeO2-Pd nanospheres were introduced as an enhanced "signal transducer layer" on account of the electron transfer acceleration caused by catalyzing glucose to produce H2O2 for differential pulse voltammetry signal readout and further 3,3'5,5'-tetramethylbenzidine (TMB) oxidation for colorimetric analysis. Meanwhile, for achieving superior performance of the proposed oPAD, in situ growth of urchin-like gold nanoparticles (Au NPs) onto cellulose fibers was adopted to improve "the recognition layer" in favor of immobilizing antibodies for targeting Aβ through specific antigen-antibody interactions. Combined with the delicate design of oPAD, exhibiting actuation of the conversion procedure between hydrophobicity and hydrophilicity on paper tabs in the assay process, the oPAD successfully enabled sensitive diagnosis of Aβ in a linear range from 1.0 pM to 100 nM with a limit of detection of 0.05 pM (S/N = 3) for electrochemical detection, providing a reliable strategy for quantifying the Aβ protein in clinical applications. Ministry of Education (MOE) This work was financially supported by the Science and Technology Projects of University of Jinan (XKY2002), the Natural Science Foundation of Shandong Province (ZR2020MB057), the Singapore Ministry of Education (MOE AcRF Tier 1 RG176/16), the Taishan Scholars Program, the Case-by-Case Project for Top Outstanding Talents of Jinan, and the project of "20 Items of University" of Jinan (2018GXRC001).

Isothermal amplification strategies capable of rapid, inexpensive, and accurate nucleic acid detection provide new options for large-scale pathogen detection, disease diagnosis, and genotyping. Here we report a highly sensitive multicomponent XNA-based nucleic acid detection platform that combines analyte preamplification with X10-23-mediated catalysis to detect the viral pathogen responsible for COVID-19. The platform, termed RNA-Encoded Viral Nucleic Acid Analyte Reporter (REVEALR), functions with a detection limit of ≤20 aM (∼10 copies/μL) using conventional fluorescence and paper-based lateral flow readout modalities. With a total assay time of 1 h, REVEALR provides a convenient nucleic acid alternative to equivalent CRISPR-based approaches, which have become popular methods for SARS-CoV-2 detection. The assay shows no cross-reactivity for other in vitro transcribed respiratory viral RNAs and functions with perfect accuracy against COVID-19 patient-derived clinical samples.

Graphical abstract Enzyme-linked immunosorbent assay (ELISA) is widely used for the detection of disease biomarkers. However, it utilizes time-consuming procedures and expensive instruments, making it infeasible for point-of-care (POC) analysis especially in resource-limited settings. In this work, a multicolorimetric ELISA biosensor integrated on a paper/polymer hybrid microfluidic device was developed for rapid visual detection of disease biomarkers at point of care, without using costly equipment. This multicolormetric ELISA platform was built on multiple distinct color variants resulted from the catalytic oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) and the etching of gold nanorods (AuNRs). The vivid color changes could be easily distinguished by the naked eye, and their red mean values allowed quantitative biomarker detection, without using any sophisticated instruments. When this multicolorimetric ELISA was integrated on a paper/polymer hybrid analytical device, it not only provided integrated processing and high portability but also enabled fast assays in about 50 min due to the unique advantages of paper/polymer hybrid devices. The limit of detection of 9.1 ng/μL of the hepatitis C virus core antigen, a biomarker for hepatitis C, was achieved using this multicolorimetric ELISA platform. This multicolor ELISA analytical device provides a new versatile, user-friendly, affordable, and portable immunosensing platform with high potential for on-site detections of various viruses, proteins, and biomarkers for low-resource settings such as at home, public venues, rural areas, and developing nations. Supplementary Information The online version contains supplementary material available at 10.1007/s00216-021-03359-8.

The plasmonic properties of gold nanoparticles (AuNPs) are a promising tool to develop sensing alternatives to traditional, enzyme-catalyzed reactions. The need for sensing alternatives, especially in underdeveloped areas of the world, has given rise to the application of nonenzymatic sensing approaches paired with cellulosic substrates to biochemical analysis. Herein, we present three individual, low-step, wet-chemistry, colorimetric assays for three target biomarkers, namely, glucose, uric acid, and free cholesterol, relevant in diabetes control and their translation into paper-based assays and microfluidic platforms for multiplexed analysis. For glucose determination, an in situ AuNPs synthesis approach was applied into the developed μPAD, giving semiquantitative measures in the physiologically relevant range. For uric acid and cholesterol determination, modified AuNPs were used to functionalize paper with a gold-on-paper approach with the optical properties changing based on different aggregation degrees and hydrophobic properties of particles dependent on analyte concentration. These paper-based assays show sensitivity ranges and limits of detection compatible for target analyte level determination and detection limits comparable to those of similar enzymatic, colorimetric systems, relying only on plasmonic transduction without the need for enzymatic activity or other chromogenic substrates. The resulting paper-based assays were integrated into a single 3D, multiplex paper-based device using paper microfluidics, showing the capability for performing different colorimetric assays with distinct requirements in terms of sample flow and sample uptake in test zones using a combination of both horizontal and vertical flows inside the same device. The presented device allows for multiparametric, colorimetric measures of different metabolite levels from a single complex sample matrix drop using digital color analysis, showing the potential for development of low-cost, low-complexity tools for diagnostics toward the point-of-care.

Detecting vascular endothelial growth factor C (VEGF-C), a kind of tumor biomarker, is of significant clinical importance in evaluating the prognosis of patients with cancer. However, laboratory analyses are usually not suitable for point-of-care testing because they are expensive and time consuming. In response to these challenges, we fabricated an origami paper-based microfluidic electrochemical device. To improve the specificity of VEGF-C detection, nanocomposites, synthesized by new methylene blue (NMB), amino-functional single-walled carbon nanotubes (NH2-SWCNTs), and gold nanoparticles (AuNPs), were used to modify the surface of working electrodes. Results of electrochemical detection showed that the immunosensor had excellent linearity, ranging from 0.01 to 100 ng mL−1 (R2 = 0.988), and the limit of detection was 10 pg mL−1. To confirm the high specificity of the device under real-world conditions, we evaluated the device using clinical serum samples from our hospital. The results demonstrated that the device had an excellent performance and could provide a platform for real-time detection of cancers., Sun, Wang et al. report an origami paper-based immunosensor for the electrochemical detection of the VEGF-C biomarker in blood serum. The immunosensor is made by modifying the surface of working electrodes with new methylene blue, amino-functional single-walled carbon nanotubes, and gold nanoparticles and demonstrates excellent performance with a limit of detection in the range of picograms per milliliter.

The major obstacle to developing nanozymes which are considered as promising alternatives to natural enzymes is their moderate performance, including poor affinity for substrates, low catalytic activity, and severe pH-dependence. To address these issues, herein, we synthesize ultrathin layered double hydroxide (LDH) nanosheets with a thickness of 1.4 nm and an average lateral size of 23 nm using a fast-precipitation method. Through the rational design of their compositions, it is found that NiMn LDHs exhibit the optimum peroxidase mimicking performance with excellent substrate affinity, high catalytic activity (a limit of detection (LOD) of 0.04 μM H2O2) and robustness in a wide pH range (from 2.6 to 9.0), which is superior to that of natural horseradish peroxidase (HRP). The main active centers are identified as Mn sites because of their strong Lewis acidity and low redox potential. Furthermore, a series of disposable paper bioassays based on NiMn LDH nanozymes are designed and used for the highly sensitive detection of H2O2 and ascorbic acid (AA).

In this study, we developed a novel, simple, rapid, and low-cost colloidal gold-based immunochromatography method, with filter paper replacing nitrocellulose membrane as the substrate. To obtain adequately immobilized protein, chitosan was used to functionalize the filter paper. After conditions and parameters were optimized, the novel immunochromatography method was applied for detection of sulfonamide residues in milk. Quantitative detection was accomplished using a smartphone and Photoshop software (Adobe Inc., San Jose, CA), allowing us to screen 13 sulfonamides with a limit of detection ranging from 0.42 to 8.64 μg/L and recovery ranging from 88.2 to 116.9% in milk. The proposed novel method performed similarly to the conventional method that uses a nitrocellulose membrane as the transport medium, and it had lower cost and better usability because of the inexpensive and easily available filter paper.

This paper introduces a novel potential-resolved paper-based biosensor for simultaneous detection of multiple microRNAs (miRNAs) (taking miRNA-155 and miRNA-126 as examples) based on the bipolar electrode (BPE) electrochemiluminescence (ECL) strategy. The proposed multiple-channel paper-based sensing microfluidic platform was prepared by wax-printing technology, screen-printing method, and in situ Au nanoparticles (AuNPs) growth to form hydrophilic areas, hydrophobic boundaries, waterproof electronic bridge, driving electrode regions, and parallel bipolar electrode regions. CdTe quantum dots (QDs)-H2 and Au@g-C3N4 nanosheets (NSs)-DNA1 were used as dual electrochemiluminescence signal probes, and carboxylated Fe3O4 magnetic nanoparticles existed as carriers. CdTe QDs-H2/S2O82- and Au@g-C3N4 NSs-DNA1/S2O82- could exhibit two strong and stable ECL emissions at a drive voltage of 9 and 12 V, respectively, which can be used as effective potential-resolved signal tags. In addition, the proposed three-dimensional (3D) DNA nanomachine model and the target miRNA cycle strategy were used to achieve double amplification of electrochemiluminescence intensity. More importantly, the combination of the bipolar electrode system and the potential-resolved multitarget electrochemiluminescence method can greatly reduce the spatial interference between substances. The prepared ECL biosensor showed a favorable linear response for the detection of miRNA-155 and miRNA-126 with relatively low detection limits of 5.7 and 4.2 fM, respectively. With excellent sensitivity, the strategy may provide an efficient method for clinical application, especially in detection of trace multiple targets.

There is growing demand for simple to operate, sensitive, on-site quantitative assays to investigate concentrations of drug molecules in pharmaceutical preparations for quality assurance. Here, we report on the development of two colorimetric analysis methods for the study the antibiotic doxycycline hyclate (DOX) and the nasal decongestant oxymetazoline hydrochloride (OXY), in solution as well as in their respective formulations. We compare a UV/vis spectrophotometry method with a color change recorded on a microfluidic paper-based analytical device (μPAD). Detection is based on the pharmaceutical compounds coupling with diazotized 4-aminoacetophenone (DAAP) under alkaline conditions to produce colored azo-dye products. These azo-compounds were monitored by absorbance at 425 nm for DOX and 521 nm for OXY, with linear calibration graphs in the concentration range of 0.5–35 mg L−1 (DOX) and 1.0–40 mg L−1 (OXY) and limits of detection of 0.24 mg L−1 (DOX) and 0.32 mg L−1 (OXY). For the μPAD method, color intensity was measured from photographs and a linear increase was observed at concentrations from above approximately 15 mg L−1 for both compounds and up to 35 mg L−1 for DOX and 40 mg L−1 for OXY. The developed methods were also applied to the formulated pharmaceuticals and no interference was found from the excipient. Thus, the paper-based device provides an inexpensive, simple alternative approach for use outside centralized laboratories with semi-quantitative capability.

Propofol is a widely used intravenous anesthetic agent in sedation and general anesthesia. To improve the safety and maintain the depth of anesthesia, it is important to develop a rapid, sensitive, and reliable method to monitor the concentration of propofol in blood during anesthesia continuously. Here, we present a novel strategy based on paper spray ionization-mass spectrometry (PSI-MS) to detect propofol. Samples (in 10 μL) were mixed with methanol as protein precipitation solvent and 2,6-dimethylphenol as internal standard. Protein micro-precipitation was achieved with methanol by vortexing and centrifuging for 5 s each, and propofol was extracted to the supernatant. PSI-MS was performed in negative ionization mode, and MS signal lasted for 1 min. The analysis of a single sample was completed within 2 min. The area ratios of propofol to internal standard were calculated for quantification. Limit of detection of 5.5 ng mL−1 and limit of quantification of 18.2 ng mL−1 were achieved for propofol in whole blood. Calibration curve was linear in the range of 0.02–10 μg mL−1. The developed method was used successfully in monitoring the propofol concentration in 3 patients’ whole blood during anesthesia, showing its further application in controlling and feeding-back target concentration infusion.

Development of selective and sensitive methods for on-site assay of tetracycline (TC) is of great significance for public health and food safety. Herein, a valid ratiometric fluorescence strategy using g-C3N4 nanosheets coupled with Eu3+ is designed for the assay of TC. In this strategy, both Eu3+ and g-C3N4 nanosheets serve as the recognition units of TC. The blue fluorescence of g-C3N4 nanosheets can be quenched by TC via the inner filter effect (IFE); meanwhile, the red fluorescence of Eu3+ can be enhanced by TC through the antenna effect (AE). The synergistic effect of AE and IFE caused by TC makes the developed ratiometric fluorescent sensor display a wide linear range for TC from 0.25 to 80 μM with a detection limit of 6.5 nM and a significant fluorescence color evolution from blue to red. Given its simplicity, free-label, excellent selectivity, high sensitivity, and recognizable color change, point-of-care testing systems, including smartphones and test paper-based assays, are developed for the visual sensing of TC. The integration of smartphones and test paper on a ratiometric fluorescent sensor greatly reduces the detection cost and time, providing a promising method for the qualitative discernment and semi-quantitative assay of TC on-site. Moreover, the potential application of the approach is also verified by detecting TC in milk.

In this study, a microfluidic paper-based analytical device (mu PAD) was integrated with a smartphone app capable of offline (without internet access) image processing and analysis for the rapid colorimetric detection of glucose. A self-inking stamp was used to form hydrophobic channels on a piece of paper-towel due to its superior water absorption efficiency. As demonstrated, the developed sensor was employed for the colorimetric detection of glucose in artificial saliva in the linear scope of 0 - 1 mM with a calculated detection limit of 29.65 mu M. The experimental results show that the quantitative analysis of glucose with the proposed smartphone platform could be completed in less than one minute. The app developed for the smartphone platform is capable of extracting the color-changing area with an embedded image processing tool which could address the problem of color uniformity in the detection zones of mu PAD. The integrated platform has great potential to be used for non-invasive measurements of glucose in body fluids, like tears, sweat and saliva.

Conventional mass spectrometry (MS)-based analytical methods for small carbohydrate fragments (oligosaccharides, degree of polymerization 2–12) are time-consuming due to the need for offline sample pretreatment such as desalting. Herein, we report a new paper spray ionization method, named desalting paper spray (DPS), which employs a piece of triangular filter paper for both sample desalting and ionization. Unlike regular paper spray ionization (PSI) and nano electrospray ionization (nanoESI), DPS-MS allows fast and sensitive detection of oligosaccharides in biological samples having complex matrices (e.g., Tris, PBS, HEPES buffers or urine). When oligosaccharide sample is loaded onto the filter paper substrate (10 mm × 5 mm, height × base) made mostly of cellulose, oligosaccharides adsorb on the paper via hydrophilic interactions between oligosaccharides and cellulose. Salts and buffers can be washed away using an ACN/H(2)O (90/10 v/v) solution, While oligosaccharides can be eluted from the paper using a solution of ACN/H(2)O/formic acid (FA) (10/90/1 v/v/v) and directly spray-ionized from the tip of the paper. Various saccharides at trace levels (e.g., 50 fmol) in nonvolatile buffer can be quickly analyzed by DPS-MS (< 5 min per sample). DPS-MS is also applicable for direct detection of oligosaccharides from glycosyltransferase (GT) reactions, a challenging task which typically requires radioactive assay. Quantitative analysis of acceptor and product oligosaccharides shows increased product with increased GT enzymes used for the reaction, a result in line with radioactivity assay. This work suggests that DPS-MS has potential for rapid oligosaccharides analysis from biological samples.

We report on a simple, cost-effective, instrument-free, and portable distance-based paper device coupled with NFs for the determination of glucose. The analysis reaction is based upon the oxidative etching reaction of silver nanoparticles (AgNPs) in the presence of H2O2 that is produced from glucose after a glucose oxidase (GOx) catalytic reaction leading to a morphological transformation of AgNPs. A color band length of AgNPs is coated on to a detection channel and then etched by H2O2, and these were changed from a purple color to colorless as a correlate of the glucose concentration. To improve the performance of the enzyme immobilization, NFs, which are biocompatible without compromising their structure and biological activity, were then placed onto the sample zone. The naked-eye detection limit was 0.1 mM for 40 min of analysis time. The recoveries of glucose spiked in the artificial urine samples and control urine samples were then verified by our device and were in the acceptable range of 96 - 100%.

Polygalacturonase (PG) activity in plants can serve as an important index for plant disease. However, the conventional method to detect PG activity is a complex process and requires a skilled technician and expensive analytical equipment. In this study, a paper-based colorimetric sensor was developed based on the principle of the ruthenium red (RR) dye method for easy and simple measurement of PG activity. The proposed paper-based sensor has a three-layer structure for detection of PG activity in samples. The sensor sensitivity was enhanced by optimizing the pH of the sodium acetate buffer used in polygalacturonic acid (PGA)-RR complex formation and the reaction temperature for PG and the PGA-RR complex. Further, for quantitative analysis of PG activity, Delta RGB analysis was conducted to detect color changes in the sensing window of the sensor. Results presented that the linear measurement range of the paper sensor was 0.02-0.1 unit with the limit of detection of 0.02 unit, which showed a similar detection range, but a lower detection limit, compared to the spectrophotometry. Furthermore, PG activity based on culture condition was measured using samples from Sclerotium cepivorum to verify the potential application of the developed paper-based sensor in the field. The measured activity showed no statistically significant difference from the values obtained from the spectrophotometry at 95% confidence level. Therefore, the paper-based colorimetric sensor can be used to predict plant diseases in Allium crops during the stage of pathogen invasion, potentially contributing to the improvement of crop production.

Lithium carbonate is an effective medicine for the treatment of the bipolar disorder, but the concentration of lithium in the patient's blood must be frequently monitored because of its toxicity. To date, no colorimetric methods of lithium ion detection in whole blood without pretreatment have been reported. Here, we report a colorimetric paper-based device that allows point-of-care testing in one step. This device is composed of two paper-based elements linked to each other: a blood cell separation unit and a colorimetric detection unit. After a portion of whole blood has been placed on the end of the separation unit, plasma in the sample is automatically transported to the detection unit, which displays a diagnostic color. The key feature of this device is its simple, user-friendly operation. The limit of detection is 0.054 mM and the coefficient of variance is below 6.1%, which are comparable to those of conventional instruments using the same colorimetric reaction. Furthermore, we achieved high recovery (>90%) and reproducibility (

Free proline, termed proline, is a biomarker used for diagnosing drought stress in plants. A previously developed proline–ninhydrin reaction-based paper sensor could quickly and easily detect proline, but it was limited by low sensitivity. In this study, we developed an enclosed multilayer paper-based microfluidic sensor with high sensitivity for the quantitative detection of proline in plants. The multilayer paper-based sensor was manufactured using simple wax printing and origami methods, and contained an internal mixing channel to allow good mixing of the proline with ninhydrin, increasing the proline–ninhydrin reactivity and providing accurate and sensitive proline detection. By preloading ninhydrin onto the sample loading area, uniform coloration of the sensing window was achieved, allowing quantitative analysis of various proline concentrations using a constant reaction time. Only the sensing window and sample loading area were exposed to limit sample evaporation and contamination from the external environment. The LOD of the fabricated sensor was 23 μM, which is approximately 29-fold lower than that of the previously proposed paper sensor (657 μM). Samples were extracted from A. thaliana plants subjected to drought stress for proline detection. The proline concentrations measured using the developed paper sensor and a spectrophotometric method were not statistically significant at a confidence level of 95%. Therefore, the developed sensor can be applied to measure proline concentrations precisely in the field with a low detection limit. The developed paper-based sensor can be used to detect the early stages of drought in plants and thus improve crop productivity.

Problems of stability were found for biomarkers of alcohol consumption: ethyl glucuronide (EtG), ethyl sulfate (EtS), phosphatidylethanols (PEths), and fatty acid ethyl esters (FAEEs) in whole blood. The purpose of this study was to establish a method for the determination of these four kinds of ethanol's non-oxidative metabolites in dried blood spots (DBS) by liquid chromatography tandem mass spectrometry (LC-MS/MS), and to evaluate their stability. In this method, 50 μL of human blood was spotted onto a filter paper for DBS analysis. Samples were extracted by methanol, reconstituted by 2-propanol, and injected into the LC-MS/MS system. Limits of detection were among 0.5–50 ng/mL, and deviations in accuracy and precision were all lower than 15% at three quality control levels. The stability of the four kinds of ethanol non-oxidative metabolites in DBS was investigated during a 90-day range under three temperatures, −20 °C, 4 °C, and 25 °C. EtG and EtS showed a high level of stability in DBS in the 90-day range, regardless of the temperature. FAEEs were unstable after three days. PEths showed stability within 15 days in postmortem DBS and 60 days in antemortem DBS, respectively, at all temperatures.

Cytochrome P450 (CYP450), and in particular CYP3A4, is the most abundantly expressed CYP450 isozyme implicated in many drug-drug and medicinal plant-drug interactions. Therefore, incorporation of CYP3A4 enzyme screening at an early stage of drug discovery is preferable in order to avoid enzymatic interactions. Here we present for the first time a paper-based CYP3A4 immobilized sol-gel-derived a platform using resorufin benzyl ether as a fluorogenic enzyme substrate used to investigate enzyme activity. The fluorescence intensity of the product can be simply quantified by using a handheld digital microscope and an image analysis software. The limit of quantitation was 0.35 μM with good precision (RSDs 0.05), while offering simplicity and lower cost. Kinetic parameters of the immobilized CYP3A4 in sol-gel coated paper were calculated from the Lineweaver-Burk plot, including Michaelis constant (Km) and maximum velocity (Vmax), which were 2.71 ± 0.35 μM and 0.43 ± 0.05 μM/min, respectively. Moreover, a functional test of these devices was conducted by assessments of known CYP3A4 inhibitors (i.e. ketoconazole, itraconazole) and inducers (i.e. phenytoin, carbamazepine). To further demonstrate the broad range of uses, the devices were utilized to assay plant extracts i.e. Areca catechu seeds, Camellia sinensis leaves, Eclipta prostrata aerial part, providing results in good agreement with previous studies. Furthermore, the sol-gel immobilized enzyme stored at 4 °C can increase storage stability, offering the activity of 86.3 ± 0.4% after 3-weeks storage, equivalent to the activity of the free enzyme solution after 1-week storage. The developed paper-based devices offer versatility, portability and low-cost.

A novel 3D paper-based microfluidic screen-printed electrode (SPE) composed of two layers was constructed by photolithography and screen-printing technology. Aldehyde functionalized hydrophilic zone of the counter and reference electrodes layer was prepared for glucose oxidase immobilization. Highly conductive Prussian blue deposited reduced graphene oxide-tetraethylene pentamine (rGO-TEPA/PB) modified paper working electrode layer can be used as an electrochemical sensitive membrane for quantitative detection of hydrogen peroxide (H2O2), which was the enzyme-catalyzed reaction product. Therefore, this 3D paper-based microfluidic electrochemical biosensor can be used for quantitative detection of glucose. Under optimum conditions, the proposed biosensor can be used for quantitative determination of glucose over a wide linear range of 0.1 mM∼25 mM with detection limit of 25 μM. Finally, the 3D paper-based microfluidic electrochemical biosensor was applied to determine glucose in human sweat and blood, and the obtained results were in good consistency with values measured by Roche's blood glucose meter. In addition, the proposed 3D paper-based electrochemical device showed good repeatability, stability, and anti-interference, which would be of great potential to monitor glucose in complex biological fluids.

Real-time monitoring of neonicotinoid pesticide residues is of great significance for food security and sustainable development of the ecological environment. Herein, a paper-based surface-enhanced Raman scattering (SERS) amplified approach was proposed by virtue of multilayered plasmonic coupling amplification. The unique plasmonic SERS multilayer was constructed using three-dimensional (3D) silver dendrite (SD)/electropolymerized molecular identifier (EMI)/silver nanoparticle (AgNP) sandwich hybrids with multiple hotspots and a strong electromagnetic field in nanogaps. Dendritelike 3D silver materials with remarkably high accessible surface areas and the lightning rod effect constituted the first-order enhancement of paper-based sensors. Molecular identifiers coated upon an SD layer as the interlayer were used for target capture and enrichment. Subsequently, AgNPs featuring rough surface and local plasma resonance decorated as the top layer formed the secondary enhancement of the amplification strategy. As the most brilliant part, dendritelike 3D silver coupled with AgNPs has established double Ag layers to accomplish a multistage enhancement of SERS signals based on the superposition of their electromagnetic fields. Owning to the distinctive design of the multiple coupling amplification strategy, the fabricated SERS paper chips demonstrated impressive specificity and ultrahigh sensitivity in the detection of imidacloprid (IMI), with a detection limit as low as 0.02811 ng mL-1. More importantly, the multiple SERS enhancement paper chip holds great potential for automated screening of a variety of contaminants.

The increasing prevalence of antibiotic-resistant bacteria needs rapid identification and efficient destruction routes. This study proposes testing paper derived from electrospun fibrous mats and aggregation-induced emission (AIE) probes for trace sensing and simultaneous destruction of antibiotic-resistant E. coli. Aptamers are conjugated on fibers for selective capture of E. coli, and the capture capability can be regenerated via rinsing with salt solution. Hydroxyl tetraphenylethene (TPE) is linked with two cephalosporin molecules to construct TPE-Cep probes, and the fluorescence emission is turned on specifically in the presence of β-lactamase, which is a critical marker for screening resistant bacteria. Fibrous mats are lit up only in the presence of antibiotic-resistant bacteria, and the fluorescence intensity changes could be statistically fitted into an equation for quantitative analysis. Fibrous strips display apparent color changes from blue to green for a visual readout of bacterial levels, and the limit of detection (LOD) is much lower than those of previous paper substrates. In addition, the TPE-Cep probes could produce reactive oxygen species (ROS) under room light illumination to kill the captured bacteria. Thus, the integration of aptamer-grafted electrospun fibers and functional AIE probes provides potential for selective capture, trace imaging and photodynamic destruction of antibiotic-resistant bacteria.

Here, we present a new diacetoxy-functionalized UiO-66 metal-organic framework (MOF) for the trace level detection of hydrazine in water. The MOF material (1) was solvothermally prepared by the reaction between ZrOCl2·8H2O and 2,5-diacetoxy-1,4-benzenedicarboxylic acid (H2BDC-(OCOCH3)2). The desolvated material (1') showed a highly selective fluorescent turn-on signal towards hydrazine in water, which can be visualized by the naked eye under a UV lamp. Within 1 min of hydrazine addition, there was 14-fold fluorescence enhancement. The probe can detect hydrazine up to the nanomolar level (detection limit = 78.8 nM) in water. This detection limit is the lowest among MOF-based fluorescent probes for hydrazine. The material was also utilized for the sensing of hydrazine in paper strips and environmental water samples. Hydrazine-selective deprotection of ester groups anchored with the ligand is the principal reason behind the switch-on nature of sensing.

The first discrete bimetallic europium(iii)/copper(ii) complex for the fast, sensitive and selective luminescent detection of both aqueous and gaseous hydrogen sulfide has been developed. The chemosensor displayed an impressive response time of 30 seconds and a low theoretical limit of detection (100 ppb) for gaseous hydrogen sulfide.

This work reports the development of a rapid, simple and inexpensive colorimetric paper-based assay for the detection of the severe acute respiratory symptom coronavirus 2 (SARS-CoV-2) humanized antibody. The paper device was prepared with lamination for easy sample handling and coated with the recombinant SARS-CoV-2 nucleocapsid antigen. This assay employed a colorimetric reaction, which is followed by horseradish peroxidase (HRP) conjugated detecting antibody in the presence of the 3,3',5,5'-tetramethylbenzidine (TMB) substrate. The colorimetric readout was evaluated and quantified for specificity and sensitivity. The characterization of this assay includes determining the linear regression curve, the limit of detection (LOD), the repeatability, and testing complex biological samples. We found that the LOD of the assay was 9.00 ng μL-1 (0.112 IU mL-1). The relative standard deviation was approximately 10% for a sample number of n = 3. We believe that our proof-of-concept assay has the potential to be developed for clinical screening of the SARS-CoV-2 humanized antibody as a tool to confirm infected active cases or to confirm SARS-CoV-2 immune cases during the process of vaccine development.

In the present article we report a new hybrid microfluidic device (hyFlow) comprising a disposable paper electrode and a three-dimensional (3D) printed plastic chip for the electrochemical detection of a magnetic bead-silver nanoparticle (MB-AgNP) bioconjugate. This hybrid device evolved due to the difficulty of incorporating micron-scale MBs into paper-only fluidic devices. Specifically, paper fluidic devices can entrap MB-containing conjugates within their cellulose or nitrocellulose fiber matrix. The hyFlow system was designed to minimize such issues and transport MB conjugates more efficiently to the electrochemical detection zone of the device. The hyFlow system retains the benefit of fluid transport by pressure-driven flow, however, no pump is required for its operation. The hyFlow device is capable of detecting either pre-formed MB-AgNP conjugates or conjugates formed in-situ formation. The detection limit of AgNPs using this device is 12 pM, which represents just 22 AgNPs per MB.

Owing to its critical role in the development of female reproductive tissues and as a clinical biomarker, there is an urgent need to develop a rapid and cost-effective method to sensitively detect 17β-estradiol (E2). In this work, a folding aptasensor platform with microfluidic channels for the label-free electrochemical detection of E2 is described. The platform, designed with a delicate folding structure, integrating filter holes, microfluidic channels, reaction chambers, and a three-electrode system, is extremely easy to use. To increase the detection sensitivity and immobilize the aptamer, we synthesized a novel nanoassembly consisting of amine-functionalized single-walled carbon nanotube/new methylene blue/gold nanoparticles (AuNPs) and modified the working electrode with this nanoassembly. The calibration curve obtained from the experimental results exhibited a linear range between 10 pg mL-1 and 500 ng mL-1 (R2 = 0.993), and a detection limit of 5 pg mL-1 was achieved (S/N = 3). Furthermore, experiments to detect E2 in clinical serum were conducted, and the results were highly similar to those obtained using a large electrochemical luminescence apparatus. By integrating multiple functional components, adopting novel nanoassemblies, and using a folding structure, this paper-based platform not only has great potential as a simple and convenient integrated device for point-of-care testing of E2, but also as a portable, low-cost, and highly sensitive aptasensor platform capable of detecting many diagnostic biomarkers with the appropriate aptamers.

Driven by a bright prospect for rapid, portable and cost-effective point-of-care testing, an assembled Pasteur pipette device to integrate nucleic acid extraction, amplification and detection was developed to detect B. cereus in a sample-to-answer format. Denaturation Bubble-mediated Strand Exchange Amplification (SEA) was chosen to perform isothermal amplification because it requires only a pair of primers and one Bst DNA polymerase. The established SEA can detect as low as 1.0 × 10−13 M genomic DNA of B. cereus, which was comparable with the previously reported method for B. cereus detection. The assembled Pasteur pipette allows sample-to-answer diagnostic in a simple, low-cost, portable, and disposable format. The inherent function of Pasteur pipette enables direct liquid handling without the need of extra pipettes, syringes or pumps. Visual readout was achieved by using a pH sensitive dye, further simplifying result judgment process. The detection limit for B. cereus is 1.0 × 104 CFU/mL in pure cultures, while the detection limit in artificially contaminated milk is 1.0 × 105 CFU/mL without enrichment and 1.0 × 100 CFU/mL following 12 h enrichment. Considering that typical cell counts in food samples associated to food poisoning are 1.0 × 105 to 1.0 × 108 CFU per gram/milliliter B. cereus, our Pasteur pipette is enough sensitive for answer-to-sample diagnosis of B. cereus even directly from foods without enrichment. The whole diagnostic procedure could be completed within 50 min, dramatically decreasing the detection time. In a word, the assembled Pasteur pipette device, combined with a homemade metal bath, possesses great potential for sample-to-answer application in resource-limited settings.

Field-amplified stacking (FAS) is a commonly used method for enhancing the sensitivity of charged species from low conductive media in capillary electrophoresis. FAS also showed significant sensitivity enhancement effect on a uniform paper fluidic channel by proper design of the electrolyte. In this paper, a novel method of introducing electric field gradient is proposed by geometry design of a 2D paper fluidic channel, and field amplification effect was successfully demonstrated with reduced requirement on the sample's conductivity. Sensitive colorimetric detection of microalbuminuria (MAU) from urine samples was demonstrated by mobile phone camera. Experimental results showed that, with active electric field motivation, up to 93.5% of the loaded protein probe could be effectively transferred and stacked into a narrow band on the newly designed paper fluidic channel. A limit of detection (LOD) of 6.5 mg‧L−1 HSA was achieved with a dynamic range of 10–300 mg‧L−1 (linear in the range of 10–100 mg‧L−1, R2 = 0.991). Combined with selective staining of albumin with bromophenol blue (BPB), the established method was applied to the detection of MAU from clinical urine samples, and consistent results with that of the clinical method were obtained. With this paper-based analytical device (PAD), MAU from highly conductive urine samples can be directly loaded and detected without any pretreatment. This method provides a way to develop highly sensitive point-of-care test (POCT) for rapid screening of some diseases.

Salmon fish farmers face remarkable problems in fish rearing and handling due to the spread of disease by infectious pancreatic necrosis virus (IPNV). Therefore, we developed a straightforward and sensitive technique to detect IPNV-based on recombinant human apoferritin heavy chain (hAFN-H) protein nanoparticles. In this study, the 24 subunits of the hAFN-H were genetically modified to express 6×His-tag and protein-G at their C-terminal site using Escherichia coli. We thus achieved a two-step signal amplifying strategy that utilizes a recombinant hAFN-H nanoprobe having a protein-G-binding site that targets the Fc region of monoclonal antibodies and a 6×His-tag that actively interacts with the functionalized Ni-NTA derivatives. In this study, we report a considerable advancement in magnetic bead-based detection systems that use Ni-NTA-Atto 550, reliably exhibiting detection limits of 1.02 TCID50/mL (50% tissue culture infective dose). Additionally, we propose a lateral flow chip-based detection method that uses the hAFN-H surface functionalized with 5 nm of the Ni-NTA-nanogold complex as a nanoprobe; the limit of detection towards IPNV was 0.88 TCID50/mL. The detection of IPNV by this recombinant hAFN-H nanoprobe was linear to virus titers in the range of 101-103 TCID50/mL.

The adulteration of herbal medicines by dexamethasone or prednisolone is regarded as a serious problem in many communities. Herein, a novel platform for the separation and quantification of both target steroids in herbal medicines based on electrochemical paper-based analytical devices (ePADs) has been created. The ePAD was composed of Whatman SG81 chromatography paper, 3D-printed devices and a commercial screen-printed electrode. Whatman SG81 silica-coated paper was used for the separation of dexamethasone and prednisolone based on the difference in their partition coefficients during the flow of the mobile phase. The optimal mobile phase was composed of 60% ethyl acetate in cyclohexane and required 7 min for separation. The separated steroids on the paper were then quantified by electrochemical detection using differential pulse voltammetry, in which the 3D-printed devices facilitated the measurement. Analytical detection ranges of 10–500 μg mL−1 were obtained for both dexamethasone and prednisolone (r2 = 0.988 and 0.994, respectively). The limits of detection for dexamethasone and prednisolone were 3.59 and 11.98 μg mL−1, respectively, whereas the limits of quantification were 6.00 and 20.02 μg mL−1, respectively. The amounts of both target steroids derived from real herbal medicine samples determined by the proposed method were comparable to those obtained with assays using standard high-performance liquid chromatography. In addition, a simple evaporation step can be used to increase the concentration of the samples before analysis. These ePADs are simple, low-cost, rapid, and very promising for on-site quantitative detection.

In situ identification and quantification of unsaturated fatty acid (FA) C=C positional isomers in human serum is herein performed by negative-ion paper spray (PS) mass spectrometry. Typically, by direct application of an alternating current (AC) voltage to the wet paper, the PS ionization could perform stably in the negative-ion mode without severe discharge. We suppose epoxidation reaction between unsaturated C=C bonds and reactive oxidative species might be initiated by a mild electrical discharge, which could be rapidly and controllably produced via a low amplitude AC voltage. Upon collision-induce dissociation (CID), the epoxide was fragmented to generate diagnostic ions indicating the C=C location. The intensity of the characteristic product ions could also be used for absolute quantification of the FA C=C positional isomers. The limits of detection (LODs) and limits of quantification (LOQs) were roughly in the range of 0.0178–0.0506 μM and 0.0218–0.3634 μM for standard FAs. Without the additional sample preparations or reactive chemical reagents, epoxidation of unsaturated FAs and ionization of the epoxide could be achieved in one-step by negative-ion mode PS, which enable a promising methodology for on-site clinical diagnosis.

The development of low cost, portable, and disposable biosensors for equipment-free and naked-eye biosensing is in eager demand for their widespread application in biomedical field, but it is still a challenge. Herein, we propose a novel paper analytical device (PAD) for truly equipment-free and naked-eye biosensing using dopamine as the chromogenic agent based on target-initiated catalyzed oxidation reaction. The dopamine-functionalized PAD (DPAD) possesses a significant three-dimensional net structure, excellent hydrophilicity, and unique response toward G-quadruplex DNAs against other DNAs, benefiting the bio/chemo reaction occurrence to assay target biomolecules. In light of the exceptional properties, the fabricated DPAD was applied in the analysis of Dam MTase through target-triggered exponential isothermal amplification. The recognition and methylation of H1 by Dam MTase contribute to formation of abundant hemin/G-quadruplexes, which catalyze oxidation of dopamine into dopachrome and reduce the dopamine amount on the DPAD surface. In comparison with the case in which Dam MTase is absent, an evident deep pink signal originating from dopachrome is observed directly by the naked eye and relied on Dam MTase concentrations. Therefore, truly equipment-free and naked-eye detection of Dam MTase is achieved with a detection limit of 1.46 U/mL. The fabricated DPAD not only achieves Dam MTase-visualized detection but also permits the accurate determination of other analytes by varying recognizable DNA's sequences, thus offering a universal biosensor and depicting significant potential for widespread applications in biomedical field.

Chemiluminescence (CL) immunoassays for simultaneous detection of early acute myocardial infarction (AMI) biomarkers, including copeptin, heart-type fatty acid binding protein (h-FABP), and cardiac troponin I (cTnI), were developed by using Co2+/N-(aminobutyl)-N-(ethylisoluminol) (ABEI) functionalized magnetic carbon composite (Co2+-ABEI-Fe3O4@void@C) as an interface and a three-dimensional microfluidic paper-based device (3D μPAD) as a detection system. For CL immunoassays, Co2+-ABEI-Fe3O4@void@C was assembled with chitosan (CS) and gold nanoparticle-conjugated antibody (Au-Ab) sequentially to form the sensing platform (Co2+-ABEI-Fe3O4@void@C-CS/Au-Ab). In the presence of antigen (Ag), Ag was captured by the sensing interface to form an immunocomplex, leading to an increase in CL intensity due to the catalysis of -COO- existing in Ag. A 3D μPAD with three detection zones for simultaneous detection of copeptin, h-FABP, and cTnI was designed and fabricated to obtain time-resolved CL signals. Three kinds of immunocomplexes formed with copeptin, h-FABP, and cTnI were added to three detection zones of 3D μPAD, respectively. After injecting H2O2, three time-resolved CL signals were generated in one CL detection run by virtue of time-delayed transport of H2O2 to different detection zones. The three time-resolved CL signals were used for the simultaneous determination of copeptin, h-FABP, and cTnI. The detection limit of copeptin, h-FABP, and cTnI was 0.40 pg/mL, 0.32 pg/mL, and 0.50 pg/mL, respectively, which is at least 1 order of magnitude lower than most of the reported immunoassays. The immunoassays could be directly used for the detection of copeptin, h-FABP, and cTnI in human serum samples. The proposed immunoassays are simple, fast, sensitive, and selective, and are of great application potential in early diagnosis and treatment of AMI.

A simple paper-based analytical device (PAD) has been developed to rapidly detect formaldehyde (FA) in food samples. The analysis was based on sulfite assay where FA reacted with excess sulfite to generate sodium hydroxide (NaOH) that was quantified on PAD using acid-base titration. The PAD consisted of a central sample zone connected to ten reaction and detection zones. All detection zones were pre-deposited with polyethylene glycol (PEG) with phenolphthalein (Phph) as an indicator. Reaction zones contained different amounts of the titrant, potassium hydrogen phthalate (KHP). On flowing into reaction zones, the NaOH product reacts with KHP to reach the end point. In the presence of excess NaOH, unneutralized NaOH reached the detection zone and caused Phph color change from colorless to pink. In contrast, when NaOH was less than KHP, the detection zone remained colorless. Concentration of FA can be quantified from the number of pink detection zone(s) which were correlated with a known amount of pre-deposited KHP on the PAD. Total analytical process could be completed within 5 min. Areas of each zone and amounts of reagents added to the corresponding zones of the PAD were optimized to obtain reproducible and accurate results. PAD gave ranges of FA detection of 100–1000 mg L−1 with an interval of 100 mg L−1 and the limit of detection (LOD) was 100 mg L−1. PADs were stable for up to a month under dark and cold conditions. Analysis of FA in food samples using PAD agreed well with those from the classical sulfite assay.

Food safety issues, especially those related to drug residues, have caused concern in recent years. Malachite green (MG), which is frequently used as ectoparasiticide, fungicide, and antiseptic in fish farming, is poisonous and carcinogenic. Several technologies and methods have been developed to accurately detect MG, but they can be time-consuming and expensive. Herein, we prepared a glass fiber paper as a surface-enhanced Raman scattering substrate for rapid and convenient detection of MG residues in fish. Uniform silver nanoparticles were deposited on the glass fiber paper by two in situ reduction steps of silver nitrate. The Raman signal of MG was detected and recorded using a portable Raman spectrometer in 10 s. There was a good linear relationship between the surface-enhanced Raman scattering signal intensity and the concentration of MG between 1 × 10−7 and 1 × 10−5 mol/L and the limit of detection was 5 × 10−10 mol/L. Residual MG in fish samples was extracted and detected with a recovery rate range of 98.9–119.4%. This method provides a novel way to detect MG in fish.

Paper based assays are paving the way to automated, simplified, robust and cost-effective point of care testing (POCT). We propose a method for fabricating three dimensional (3D) microfluidic paper based analytical devices (μPADs) via combining thin adhesive films and paper folding, which avoids the use of cellulose powders and the complex folding sequence and simultaneously permits assays in several layers. To demonstrate the effectiveness of this approach, a 3DμPADs was designed to conduct more assays on a small footprint, allowing dual colorimetric and electrochemical detections. More importantly, we further developed a 3D platform for implementing automated and multiplexed ELISA in parallel, since ELISA, a routine and standard laboratory method, has rarely been used in practical analyses outside of the laboratory. In this configuration, complex and multistep diagnostic assays can be carried out with the addition of the sample and buffer in a simple fashion. Using Troponin I as model, the device showed a broad dynamic range of detection with a detection limit of 0.35 ng/mL. Thus, the developed platforms allow for various assays to be cost-effectively carried out on a single 3D device, showing great potential in an academic setting and point of care testing under resource-poor conditions.

Microfluidic paper-based analytical devices (μPADs) for detection of hydrogen peroxide and glucose have been developed. The analytical performance of colorimetric detection using the conventional starch-iodine color reaction has been significantly improved by using gelatin as the surface modifier which retains the enzyme activity in the dry filter paper strip, improves antioxidability, as well as decreases the strong background signal. Under optimal conditions, the color intensities show a good linear relationship with glucose concentration ranging from 0.5 to 5 mM and hydrogen peroxide concentration from 0.5 to 6 mM, with the detection limit of 0.05 mM and 0.1 mM, respectively. In addition, the accuracy of colorimetric sensor has been successfully assessed in detecting glucose from real human serum samples and recovery value ranges from 95.7% to 97%, which are approaching to the glucose oxidase endpoint. The new colorimetric assay exhibits high sensitivity, good selectivity, acceptable stability and reproducibility. The present approach is promising for monitoring glucose for point of care diagnostic applications, especially in regions with resource-limited settings.

A new highly selective and sensitive dual-mode sensor 3TD based on the conjugate of oligothiophene and barbituric acid moiety was developed for colorimetric and turn-on fluorescent detection of CN─. The sensor 3TD exhibited high specificity towards CN─ by interrupting its own ICT producing thereupon a large blue-shift in UV–Vis spectrum and remarkable “turn-on” fluorescence emission. The detection limit was 2.26 × 10─7 M, which is quite lower than the permissible level of CN─ in drinking water according to the WHO. The fluorescent detection of CN─ was well demonstrated by filter paper strips and silica coated TLC plates. Moreover, the sensor was also used to detect CN─ in environmental water and agro-products with satisfactory results. Most importantly, in terms of these advantages of colorimetric and turn-on fluorescent dual-mode, immediate response, excellent selectivity, high sensitivity, low cytotoxicity, and good biocompatibility, the sensor 3TD was successfully applied into CN− imaging in living cells, demonstrating its excellent value in practical application.