Search

In this work, we manifest that the epitaxial structure for p-GaN gate high-electron-mobility transistor is a versatile platform to develop electronics for operating in an extremely wide temperature range (X-WTR) from 2 to 675 K, with comprehensive X-WTR studies on device operation and circuit behaviors. The key enabler for the high-temperature operation is the wide bandgap that substantially suppresses the thermal excitation of the intrinsic carrier. However, for the low-temperature side, the two-dimensional electron and hole gas (2DEG and 2DHG) channels at the heterojunctions are formed by the temperature-insensitive polarization fields, which free the carriers from freezing out. The monolithically integrated GaN n-FET, p-FET, and the resultant complementary circuits are, therefore, shown to operate in X-WTR. [ABSTRACT FROM AUTHOR]

Hot electrons with high kinetic energy could be generated in the channel of GaN high-electron-mobility transistors (HEMTs) during hard switching operation. Those “lucky” hot electrons scattered to the vulnerable interface between the passivation and barrier layers could bombard the interface region and create new defects that would lead to degradation of the dynamic on-resistance (${R}_{ON}$) after long-term operations. In this work, we propose a solution to the hot-electron induced device degradation through channel engineering, i.e., deploying a double-channel structure in place of the conventional single-channel structure in ${p}$ -GaN gate HEMTs. It is revealed that hot electrons are mostly generated in the lower channel and thus the additional scattering interface can effectively deter the hot electrons from reaching the vulnerable surface. Dynamic ${R}_{ON}$ degradation induced by long-term stresses at “semi-on” states is shown to be substantially suppressed in the ${p}$ -GaN gate HEMT with the double-channel structure. [ABSTRACT FROM AUTHOR]

With a switching drain bias, the gate reliability of Schottky-type ${p}$ -GaN gate high-electron-mobility transistors (HEMTs) under AC positive gate bias stress has been systematically investigated. The mean-time-to-failure (MTTF) under such application-relevant stress is found to be prolonged compared to that extracted from static and AC gate bias stress tests with the absence of a switching drain bias and exhibits positive coefficients with frequency and OFF-state drain bias (${V} _{\text {DSQ}}$). Such results can be explained by the drain-induced hole insufficiency in the gate stack at large ${V} _{\text {DSQ}}$ , a physical mechanism that results in elevated energy band at ON-state when ${V} _{\text {DSQ}}$ is just switched to low voltage. This non-equilibrium transient status could suppress injection of electrons from the 2DEG channel to the ${p}$ -GaN gate, which in turn substantially weakens the hot-electron’s generation in the depleted ${p}$ -GaN layer and the subsequent bombardment to the gate-metal/ ${p}$ -GaN interface, and thus prolongs the gate lifetime. [ABSTRACT FROM AUTHOR]

A cost-effective engineered bulk silicon (EBUS) substrate technology is presented, featuring p-n junction implemented on bulk Si substrates using mainstream ion implantation and thermal annealing processes. Standard p-GaN/AlGaN/GaN heterostructures are successfully grown on the EBUS substrate and used to fabricate 200-V enhancement-mode p-GaN gate HEMTs. By creating deep trenches in the EBUS substrate to isolate the local P+ silicon regions underneath the high-side (HS) and low-side (LS) power switches, adverse effects (e.g., back-gating and dynamic ON-resistance degradation) in the use of conventional bulk Si substrate are all eliminated. The mechanism of crosstalk suppression in the GaN-on-EBUS platform is revealed in comparison with conventional GaN-on-Si platform and verified by a series of designed tests. [ABSTRACT FROM AUTHOR]

Although the gallium nitride (GaN) high-electron-mobility transistor/silicon carbide (SiC) junction field-effect transistor (JFET) cascode device exhibits certain performance advantages over the SiC metal–oxide–semiconductor field-effect transistor (MOSFET), its robustness in harsh operating conditions is unknown. In this work, the short-circuit (SC) robustness of 650-V GaN/SiC cascode devices is characterized, analyzed, and compared with that of several mainstream SiC MOSFETs. GaN/SiC cascode devices exhibit competitive SC capability. Different failure modes are observed: thermal runaway in the SiC JFET of the cascode device and gate-to-source breakdown in the SiC MOSFET. The difference is associated with the configuration of the dielectric above SiC in the JFET and the source pad layout. According to the waveforms in SC events, failure spots, and thermal simulation results, a thermal runaway in the SiC JFET is attributed to the positive feedback between the drain leakage current and the junction temperature in the local area (hotspot) without the source pad on the top. The SC withstand time of the cascode device can be extended by reduction of the active area without the source pad. [ABSTRACT FROM AUTHOR]

Enhancement-mode (E-mode) p-channel gallium nitride (GaN) field-effect transistors (p-FETs) are essential components for GaN-based complementary logic circuits. For the ease of integration with n-FETs, they could be fabricated on the commercial p-GaN gate high-electron-mobility-transistor (HEMT) platform, on which the two-dimensional electron gas at the AlGaN/GaN hetero-interface is completely depleted in as-grown epi-structures. However, under the gated region where p-GaN is recessed and depleted at thermal equilibrium, a parasitic electron channel (PEC) could appear at the AlGaN/GaN interface. This Letter reports experimental investigations on the PEC with specifically designed structures, confirming that the PEC does exist but imposes limited impacts on electrical characteristics of p-FETs. When connected with an external contact, the PEC could act as a back gate to modulate the overlaying p-channel. If isolated from external contacts, which is the case of p-FETs under normal operations, electrons in the PEC would redistribute under the active region of p-FETs in the horizontal direction (i.e., parallel to the surface) under different biases but are mostly confined near the AlGaN/GaN interface in the vertical direction (i.e., perpendicular to the surface). [ABSTRACT FROM AUTHOR]

We report GaN high-electron-mobility transistors (HEMTs) with a thick (7.7 µm) GaN buffer on a Czochralski low resistivity Si (LRS) substrate. The GaN HEMTs exhibit high performance for both radio-frequency (RF) amplification and power conversion. The thick GaN buffer was grown by means of vacancy engineering, delivering a low dislocation density of ∼1.6 × 108 cm−2, contributing to suppressed RF signal coupling to the lossy Si substrate and a high vertical voltage blocking capability. For RF performance, GaN HEMTs with a 650 nm gate exhibit an fT/fMAX value of 25.1/32.3 GHz and a maximum output power POUT of 2.2 W/mm at 4 GHz with a drain voltage VDS of 20 V, which is comparable with the performance of RF GaN HEMTs on a high-resistivity silicon substrate without the existence of the field plate. For power performance, the vertical breakdown voltage of the wafer is 1160 V, and the three-terminal lateral breakdown voltage is 885 V in a GaN HEMT with a gate-to-drain distance of 8 µm. The thick GaN layer on the LRS substrate scheme thus provides a compelling platform for monolithic integration of high-performance RF devices and high-voltage power devices. [ABSTRACT FROM AUTHOR]

The short circuit (SC) behavior of a newly developed GaN-HEMT/SiC-JFET cascode device is investigated in this work. The reverse leakage current through the drain-side PN junction (IR) of the SiC JFET under SC conditions is measured simultaneously during the SC event. IR of the SiC JFET increases to 6.4 A at the end of a 5-μs nondestructive SC pulse. The increase of IR during the SC pulse induces a turning point in the SC current waveform and a dramatic negative threshold voltage shift (>30 V) in the SiC JEFT, resulting in high transient drain-to-source voltage in the GaN HEMT. The underlying mechanism is associated with the increase of local potential in the P-type layer of the SiC JFET with inevitable spread resistance (RSPD). It is suggested that reducing RSPD can improve SC capability and high IR should be considered in SC failure mechanism analysis and the design of external gate resistance of the SiC JFET. [ABSTRACT FROM AUTHOR]

Short circuit (SC) capability of 650-V Schottky-type p-GaN gate high-electron-mobility transistors (HEMTs) under single and repetitive tests is characterized in this article. The investigated devices exhibit strong capability under a single SC test, but weak capability under repetitive SC tests with a bus voltage of 400 V and a gate drive voltage of 6 V. The failure mechanism under repetitive SC tests is revealed through electrothermal simulation and microscale failure spot analysis. Thermal fatigue cracks are formed due to the high temperature spike and local temperature fluctuations in the narrow GaN channel and buffer layers, leading to weak repetitive SC capability. The unique heat confinement effect in the GaN layer plays an important role in the formation of high temperature spike and fatigue cracks. The withstand time in a single SC test is several hundred microseconds due to fast drain current drop that results from high temperature and, to a lesser degree, the dynamic threshold voltage shift during the SC transient. The device failure in a single-event SC test is related to heat diffusion to a wider region. Some guidelines are proposed for handling and improving the repetitive SC capability. [ABSTRACT FROM AUTHOR]

The surface of the p-GaN layer in Schottky-type p-GaN gate high-electron-mobility transistors (HEMTs) can be reinforced with enhanced immunity to hot electron bombardment by reconstructing the surface region of p-GaN into GaON. The surface region of p-GaN is treated by remote oxygen plasma and subsequently annealed at 800 °C, thereby becoming a thin crystalline gallium oxynitride (GaON) layer that will be in direct contact with the Schottky metal. The GaON exhibits a lower valence band maximum energy than that of the p-GaN, which leads to a higher Schottky barrier at the metal/GaON interface to holes and, thus, greatly suppresses the forward gate leakage. More importantly, with higher thermodynamic stability and a larger bandgap of ∼4.1 eV, the GaON reinforces the susceptible metal/p-GaN interface against the hot electrons and, thus, substantially enhances the long-term gate reliability of p-GaN gate HEMTs under forward bias stress. The high-temperature thermal process is indispensable for the surface reconstruction, without which the plasma oxidation only reduces the gate leakage but fails to prolong the time-dependent gate breakdown lifetime. [ABSTRACT FROM AUTHOR]

A closely coupled double-channel (DC) structure realized on an 8-inch GaN-on-Si wafer is utilized to fabricate GaN high-electron-mobility-transistors (HEMTs) with enhanced RF linearity. The strong channel-to-channel coupling from this DC structure enables efficient transport of electrons between the two parallel channels to accommodate balanced carrier concentration and current density between the two channels. Consequently, the nonlinearity of source resistance under high current operations and the external bias dependence of cut-off frequencies could be substantially mitigated, leading to device linearity enhancement. Meanwhile, the DC structure enables simple top gate control that favors a high-yield planar process. Two-tone measurements at 4 GHz show that the DC GaN HEMT delivers an output 3rd-order intermodulation point (OIP3) that is improved by 5.2 dB over a single-channel GaN HEMT. [ABSTRACT FROM AUTHOR]

In a ${p}$ -channel field-effect-transistor (${p}$ -FET) bridge HEMT device recently realized on a commercial ${p}$ -GaN/AlGaN/GaN-on-Si power HEMT epi-wafer, it is revealed that the device’s reverse-conduction turn-on voltage (${V}_{\text {RT}}$) can be effectively decoupled from the forward threshold voltage (${V}_{\text {TH}}$) of Schottky-type ${p}$ -GaN gate HEMTs. Unlike the conventional Schottky-type ${p}$ -GaN gate HEMTs, of which ${V}_{\text {RT}}$ is closely linked to ${V}_{\text {TH}}$ , the ${p}$ -FET-bridge HEMT enables separate designs of ${V}_{\text {RT}}$ and $V_{\text {TH}}$ so that low-loss reverse conduction and high threshold voltage can be simultaneously realized. In addition, ${V}_{\text {RT}}$ can be further reduced by engineering the AlGaN barrier layer, which will also benefit a lower channel sheet resistance without lowering ${V}_{\text {TH}}$. [ABSTRACT FROM AUTHOR]

The threshold voltage (VTH) of an enhancement-mode Schottky-type p-GaN gate high-electron-mobility transistor (HEMT) is found to have a special dependence on the drain bias. The device commonly requires higher gate voltage to switch on the transistor from a high-drain-voltage off-state than what is expected from the static device characteristics. The reason behind the dynamic VTH has been proved to be the floating p-GaN layer, where charges could be stored and further influence VTH under different drain bias. In this article, a SPICE-compatible equivalent circuit model is presented according to the structure of Schottky-type p-GaN gate HEMTs. It features a floating node to imitate the charge storage process within the gate stack. Compared to conventional models, the proposed model could accurately predict the dynamic VTH characteristics and switching behaviors of power electronics circuits, where Schottky-type p-GaN gate HEMTs are deployed as power transistors. The phenomena related to the dynamic VTH, including the disappearance of Miller plateau, the overestimated false-turn-on problem, and the higher reverse conduction loss are evaluated with a half-bridge circuit and the merits of the proposed model are verified. [ABSTRACT FROM AUTHOR]

In this work, we study the gate leakage mechanisms of E-mode p-n junction/AlGaN/GaN (PNJ) high electron mobility transistors (HEMTs), which have been shown to deliver low gate leakage and wide safe operating gate-bias range. The intrinsic gate leakage through the PNJ-gate was found to be limited by the transport of holes through the p-GaN layer, which occurs via Poole-Frenkel emission and phonon-assisted tunneling in low and high gate bias region, respectively. In addition, lateral leakage current and the role of variable hopping process (VRH) are also discussed. Gate leakage current models based on the revealed mechanisms can quantitatively reproduce the gate-leakage behavior in the entire relevant range of gate biases and temperatures. [ABSTRACT FROM AUTHOR]

In this work, the impact ionization-induced OFF-state breakdown is revealed and systematically investigated in 100 V Schottky-type p-GaN gate high-electron-mobility transistors. Impact ionization is found to occur in the peak electric-field region at the source-terminated field-plate edge and is initiated by electrons injected from the source-side two-dimensional electron gas channel through the buffer layer. Hot electrons generated from impact ionization, when being captured by surface traps, could lead to redistribution and peak value reduction of electric-field. Consequently, the sudden rise in the OFF-state leakage current by impact ionization could be self-clamped temporally to avoid catastrophic rupture of the device. The impact ionization is further verified by the increase in dynamic OFF-state leakage current and a negative shift in threshold voltage, both of which result from positively charged holes (generated from impact ionization) drifting toward the gated channel. [ABSTRACT FROM AUTHOR]

A normally-off SiC-JFET/GaN-HEMT cascode device is recently proposed, featuring a cascode configuration that incorporates a high-voltage (i.e., 1200 V) SiC junction field effect transistor (JFET) and a low-voltage GaN high electron mobility transistor (HEMT). This cascode device exhibits superior thermal stability and switching performance compared to the SiC MOSFETs, but also inevitably presents challenge in dv/dt-control as the input gate does not directly control the high-voltage JFET. Since dv/dt-control is of great importance to the management and suppression of electromagnetic interference in power electronics systems, methods of controlling the dv/dt rates of SiC/GaN cascode devices need to be developed. In this article, we conduct systematic investigation on different dv/dt control schemes with theoretical analysis and experimental evaluation. A dv/dt-control method based on diode-clamped external JFET gate resistor is proposed and evaluated by comparing it with other more conventional methods. The proposed dv/dt-control method is verified to provide a balanced dv/dt-control on the device turn-on and turn-off. [ABSTRACT FROM AUTHOR]

A gallium nitride (GaN) ring oscillator based on high-performance one-chip complementary logic (CL) inverters is demonstrated on a conventional ${p}$ -GaN gate power HEMT (high-electron-mobility transistor) platform. It manifests the feasibility of the multiple-stage monolithic integration of GaN CL gates, the most energy-efficient digital circuit configuration, and consequently the potential of deploying CL circuits in the all-GaN power integration as peripheral circuits with higher energy efficiency. Thanks to the successful monolithic integration of enhancement-mode ${p}$ -channel and ${n}$ -channel field-effect transistors, the integrated CL inverters in this work present remarkable performances, including stringent rail-to-rail operations, substantially suppressed static power dissipation at both logic ‘low’ and ‘high’ states, suitable transition threshold voltages of ~2.0 V (40% of the common 5-V supply) and wide noise margins above 1.8 V (36% of 5 V). [ABSTRACT FROM AUTHOR]

By deploying a surface reinforcement layer (SRL) at the interface between Schottky metal and ${p}$ -GaN in the gate stack, a ${p}$ -GaN gate high-electron-mobility transistor (HEMT) with enhanced gate reliability is demonstrated. Prior to the gate metal deposition, the SRL is formed by an oxygen-plasma treatment and a subsequent high-temperature annealing process (at 800 °C) that enables surface reconstruction. Such a process converts several nanometers of ${p}$ -GaN near the surface into a crystalline GaON layer, which exhibits stronger immunity to hot electron bombardment. With nearly identical threshold voltage and ON -resistance, the ${p}$ -GaN gate HEMT with SRL yields two orders of magnitude reduction in gate leakage current at ON -state and an increase from 10.5 V to 12.7 V in forward gate breakdown voltage. Time-dependent gate breakdown measurement reveals an increase from 5.9 V to 7.8 V in the maximum ON -state gate drive voltage for a 10-year lifetime with a 1 % gate failure rate, which effectively expands the operating voltage margin of the ${p}$ -GaN gate power HEMT. [ABSTRACT FROM AUTHOR]

Systematic characterizations of a cascode device with a low-voltage enhance-mode (E-mode) p-GaN gate high-electron mobility transistor as the control device and a high-voltage (HV) depletion-mode (D-mode) silicon carbide junction field effect transistor (JFET) as the voltage blocking device are presented in this article. The demonstrated device with a breakdown voltage rating of 1200 V and a static on-resistance (RON) of 100 mΩ features small device capacitances with fast switching speed, avalanche breakdown capability, thermally stable threshold voltage (VTH), and no dynamic RON degradation. To identify its safe operation in the off-state with a high drain bias, the off-state middle point voltage (VM) between the E-mode device drain and D-mode device source is investigated. A relatively low off-state VM is achieved under both static and dynamic modes. In addition to the device-level characterization, a custom-designed double-pulse test circuit is built to evaluate the transient switching performance of the cascode device. Optimal gate drive conditions are proposed to 1) overcome the drain bias induced positive dynamic VTH shift; and 2) suppress the increased dynamic off-state leakage current (IOFF) induced by on-state hole injection. Under 800 V/16 A testing conditions, high switching speed with the drain voltage peak slew rates of 72 V/ns during turn-on and 121 V/ns during turn-off is achieved. [ABSTRACT FROM AUTHOR]

A 1200-V/100-mΩ silicon carbide (SiC) junction field-effect-transistor (JFET)/ gallium nitride (GaN) high-electron-mobility-transistor (HEMT) hybrid power switch is demonstrated, which features a flip-chip copackaged cascode configuration incorporating a vertical SiC JFET and a lateral GaN-HEMT. The high-voltage SiC-JFET provides the high-voltage blocking capability while the low-voltage GaN-HEMT enables the normally-off gate control with superior switching characteristics. Compared to conventional SiC-JFET/Si-mosfet cascode devices, the SiC-JFET/GaN-HEMT cascode device exhibits fast switching speed, which has been validated by systematic characterizations including static/dynamic device-level measurements and board-level hard-switching tests. Meanwhile, the device is free from several notorious issues of high-voltage GaN power transistors such as dynamic on-state resistance degradation and threshold voltage shift. Such a wide-bandgap semiconductor-based hybrid switch is suitable to be deployed in high-power and high-efficiency power conversion systems. [ABSTRACT FROM AUTHOR]

When the gated channel region of a GaN high-electron-mobility transistor (HEMT) is configured into multiple sub-channels in parallel and separated by embedded isolating patterns, the effective resistance of the access regions could be reduced, and consequently, the knee voltage (${V}_{{\text {K}}}$) of the transistor could be lowered. In this work, each sub-channel is defined as a convergent funnel-like shape, with its width gradually shrunk from the source side to the drain side. Different from conventional channels with uniform width under the entire gate, the funnel-shaped channel could converge electrons as they transport from source side to drain side, which facilitates electrons’ acceleration toward saturation velocity under a smaller drain-to-source bias, leading to a reduced intrinsic ${V}_{{\text {K}}}$ in the gated channel. Thus, more desirable ${I}$ - ${V}$ characteristics and more balanced performance enhancement in RF linearity and power added efficiency are achieved at a low supply voltage, making the convergent-channel HEMT attractive for power amplifiers in mobile terminals. [ABSTRACT FROM AUTHOR]

The low-temperature gate reliability of Schottky-type p-GaN gate AlGaN/GaN heterojunction field-effect transistors under forward gate voltage stress is investigated. Both temperature-accelerated and voltage-accelerated time-dependent gate breakdown stress experiments are performed. The p-GaN gate exhibits a shorter time-to-failure at a lower temperature. It is found that the time-to-failure at "use conditions" predicted by acceleration tests at high gate bias stress could be overestimated at low temperatures. Such a discrepancy stems from the distinct dominant gate leakage mechanisms at high/low gate bias stress conditions. The dominant physical mechanism of the low-temperature gate leakage current is identified to be Poole–Frenkel emission at low gate bias and Fowler–Nordheim tunneling at high bias. From the physical model, a more accurate lifetime projection can be obtained for given use conditions. [ABSTRACT FROM AUTHOR]

In this work, we demonstrate a GaN-based $\textit {p-n}$ junction gate (PNJ) HEMT featuring an ${n}$ -GaN/ ${p}$ -GaN/AlGaN/GaN gate stack. Compared to the more conventional ${p}$ -GaN gate HEMT with a Schottky junction between the gate metal and ${p}$ -GaN layer, the $\textit {p-n}$ junction can withstand higher reverse bias at the same peak electric-field as the depletion region extends to both the ${n}$ -side and ${p}$ -side, while exhibiting lower leakage current. The PNJ-HEMT shows a positive threshold voltage (${V}_{\text {TH}}$) of 1.78 V, a small gate leakage $(\sim 10^{-3}$ mA/mm @ ${V}_{\text {GS}} = {10}\,\, \text {V}$). In particular, a large forward gate breakdown voltage of 19.35 V at 25 °C and 19.70 V at 200 °C was achieved with the PNJ-gate HEMT. [ABSTRACT FROM AUTHOR]

An MOS field plate-protected Schottky-drain (gated Schottky-drain) is successfully integrated on a double-channel AlGaN/GaN MOS-HEMT to provide reverse blocking capability. The leakage suppression MOS field plate is deployed on the etched upper GaN channel layer after a barrier fully recess process, leading to a low reverse OFF-state leakage current of −20 nA/mm (at −100 V). The drain metal is deployed adjacent to the MOS field plate, contacting the upper MOS-channel and lower heterojunction channel from the sidewall. A metal-2DEG Schottky contact with a low turn-ON voltage of 0.5 V is achieved. Since the lower channel (below the MOS field plate) is separated from the etched surface of upper GaN channel layer, a high-conductivity MOS-gated channel with a sheet resistance of 806 $\Omega$ /Square is obtained. The device exhibits a threshold voltage of +0.6 V (at $10~\mu \text{A}$ /mm and +1.9 V from linear extrapolation) and an ON-resistance of ~18 $\Omega {\cdot} \text {mm}$. Besides, a high forward (and reverse) breakdown voltage of 790 V (and −656 V, all at $10~\mu \text{A}$ /mm) is achieved. [ABSTRACT FROM AUTHOR]