Search

The use of native and malted triticale (MT) flour in dry pasta has been limited despite the potential of triticale in cereal-based food production. In this study, triticale-based dry spaghetti with increasing levels of substitution (0, 25, 50, and 75 g/100 g w/w) of MT flour were formulated and analyzed. Samples were analyzed for technological and nutritional traits, including the in vitro starch and protein digestions. The gradual substitution of native triticale flour with MT increased (p < 0.05) the total dietary fiber content, whereas total starch decreased (p < 0.05). Adding MT flour increased the cooking loss and the stickiness of cooked pasta (p < 0.05). Using MT flour modulated the in vitro starch digestion, lowering the slowly digestible and resistant starch contents. The in vitro protein digestibility was positively affected using MT at the highest substitution level. Overall, MT could be used to formulate dry pasta products being the substitution to native triticale up to 50 g/100 g, a good compromise between nutritional quality and technological characteristics.

This study analyzes the nutritional life cycle assessment (LCA) of bakery products and the current state of the art. The analysis focuses on (1) the importance of applying a methodology, such as LCA, in a general way and the division into different stages considering the UNI EN ISO; (2) the development of nutritional LCA; (3) the difference between functional units in LCA and nutritional LCA; and (4) the different nutritional LCA approaches. The study emphasizes the lack of nutritional LCA studies regarding the bakery category, underlining the urgent need for this type of investigation concerning this specific food sector.

Commercial cocoa and hazelnut-based sweet spreads typically present a poor nutribiochemical level due to their ingredients and recipes, while nowadays, there is the need of developing sustainable food products addressing both an improved nutritional and environmental profile. The aim of this work was then to develop an innovative hazelnut/carob-based spread with potential high sustainability and nutritional profile, including the exploitation of grape-processing residues (grape skin flour and grapeseed oil) and carob pulp as cocoa surrogate. Rheological (rotational/oscillatory), oxidative, and thermal features of the spread were assessed and compared with two commercial nut-cocoa-based products. Tribology was used to mimic and evaluate the spreads’ behavior during oral consumption, and sensory profile (by quantitative descriptive analysis) was also assessed. All products exhibited a pseudoplastic behavior, with the elastic component prevailing over the viscous one. The innovative product showed the highest lubricity from both rheological and sensory analysis, thus well correlating to the obtained lowest viscosity and friction factor trends. Grapeseed oil provided a better nutritional profile, but the largest amount of unsaturated fatty acids promoted oxidation, despite the higher total phenolic content and antioxidant capacity coming from the use of carob and grape skin powders. The sensory perception investigation revealed a characteristic mouthfeel/flavor for the new spread identified having a more fluid consistency and a bitter/sour taste, together with a greater stickiness and a poorer smoothness due to a higher fiber content and solid fat absence.

Mealworm, migratory locust, and house cricket have recently been recognized by the European Commission as novel foods, thus being suitable in different food applications. In this work, we tested their powders as meat extenders at 5% (w/w) inclusion in beef burgers, considering their ability to vehicle phenolic compounds during simulated in vitro static gastrointestinal digestion (INFOGEST). Insect powders were abundant in different phenolic classes, recording the highest values in locust (LP; 314.69 mg/kg), followed by cricket (CP; 113.3 mg/kg) and mealworm (MWP; 51.9 mg/kg). Following a pan-cooking process, LP burgers were confirmed as the best source of phenolics, with a marked abundance of flavonoids and phenolic acids. Interestingly, the insect powders were found to affect the in vitro gastrointestinal bioaccessibility of phenolic compounds when compared with the CTR burger, likely promoted by the interactions between the phenolic compounds and proteins characterizing the tested insect powders. Among the most discriminant phenolic metabolites at the gastrointestinal level, we found several phenolic acids (mainly hydroxycinnamics), recording the highest content for the digested CP-containing burgers. Finally, stilbenes showed significant correlation values at the intestinal level with both antioxidant and enzymatic activities, while total flavonoids were the most correlated with the inhibition of acetylcholinesterase. Taken together, our preliminary findings demonstrated that insect powders added to beef burgers can promote the bioaccessibility and potential bioavailability of phenolics in the distal tracts of the intestine.

Triticale-based biscuits were formulated with increasing substitution levels (i.e., 0, 25, 50, 75, and 100% w/w) of malted triticale flour (MTF). The products were analyzed for technological and nutritional characteristics, including the evaluation of the in vitro starch digestion. The results indicated that the substitution of triticale flour with MTF increased (p < 0.05) the total dietary fiber and ash contents. Total starch decreased (p < 0.05) when the level of MTF increased in the formulation, causing an increase in reducing sugars and an increase in the starch hydrolysis index and in the in vitro predicted glycemic index (pGI). The hardness and spread ratio values of biscuits decreased (p < 0.05) with increasing levels of MTF in the recipe. The lightness of doughs and biscuits decreased (p < 0.05) with increasing MTF levels. Overall, MTF could be used to formulate biscuits with higher dietary fiber content than native triticale flour and a medium to high in vitro glycemic index value as a function of the substitution level.

The current study evaluates the prospect of wine lees (WL), a costless by-product from Amarone winemaking, as a fat replacer in muffin formulation. WL have elsewhere replaced sunflower oil, allowing the creation of 0, 25, 50, 75, and 100% fat-substituted muffins named ML0, ML25, ML50, ML75, and ML100, respectively. Batter rheology, in addition to the textural and colorimetric characteristics, the pore dimension, and the sensory aspect of the different formulations were evaluated. The batter consistency (K) of fat-replaced muffins was lower than that of the control, while the hardness and chewiness of the end products were higher. ML25 and ML50 samples reached the highest volume, while the baking loss decreased due to WL’s fiber components. ML25, ML50, ML75, and ML100 accounted for caloric reductions of 9, 18, 22, and 26%, respectively, compared to full-fat muffins. Muffins with WL showed a darker crust and crumb as lightness (L*) decreased. Moreover, a* parameter increased with the increment of WL in the formulation, leading to a redder and less yellow-hued fat-replaced muffin. In conclusion, WL could effectively replace fat in the 25–50% range in muffins, achieving a final product with reduced calories, a higher dietary fiber content, higher volume, and promising sensory aspects.

A multi-omics approach was adopted to investigate the impact of lactic acid fermentation and seed germination on the composition and physicochemical properties of rye doughs. Doughs were prepared with either native or germinated rye flour and fermented with Saccharomyces cerevisiae, combined or not with a sourdough starter including Limosilactobacillus fermentum, Weissella confusa and Weissella cibaria. LAB fermentation significantly increased total titrable acidity and dough rise regardless of the flour used. Targeted metagenomics revealed a strong impact of germination on the bacterial community profile of sprouted rye flour. Doughs made with germinated rye displayed higher levels of Latilactobacillus curvatus, while native rye doughs were associated with higher proportions of Lactoplantibacillus plantarum. The oligosaccharide profile of rye doughs indicated a lower carbohydrate content in native doughs as compared to the sprouted counterparts. Mixed fermentation promoted a consistent decrease in both monosaccharides and low-polymerization degree (PD)-oligosaccharides, but not in high-PD carbohydrates. Untargeted metabolomic analysis showed that native and germinated rye doughs differed in the relative abundance of phenolic compounds, terpenoids, and phospholipids. Sourdough fermentation promoted the accumulation of terpenoids, phenolic compounds and proteinogenic and non-proteinogenic amino acids. Present findings offer an integrated perspective on rye dough as a multi-constituent system and on cereal-sourced bioactive compounds potentially affecting the functional properties of derived food products.

Durum wheat spaghetti samples prepared with increasing levels of resistant starch (RS) from debranched waxy rice starch (DWRS; i.e., 0, 5, 10, 15 g/100 g w/w) were analyzed for chemical composition, quality and sensory parameters and in vitro starch digestion. All the DWRS-containing spaghetti was “high in fibre”, the dietary fiber content being > 6 g/100 g. In addition, spaghetti with the highest level of DWRS showed the highest RS content (p < 0.05), being 11.4 g/100 g dry matter. The starch hydrolysis index decreased (p < 0.05) as the level of DWRS increased, with a reduction of >20% comparing the 15-DWRS pasta to the control. DWRS had a negative impact on quality parameters, especially at higher DWRS levels. The use of DWRS shortened the optimal cooking time and impacted the samples’ cooking loss, firmness, and stickiness. In addition, sensory analysis revealed differences among samples. However, irrespective of the level of DWRS in the recipe, the score for all attributes was > 5, which is considered the limit of acceptability. Substituting part of the semolina flour with DWRS increased the level of RS and the overall nutritional profile and affected the quality of semolina pasta, mainly at higher levels in the recipe.

Trub is a brewing by-product rich in proteins and fibers. We used trub, after a debittering step, at 5, 10, and 15 g/100 g (PT5, PT10, and PT15, respectively) to fortify durum wheat fresh pasta. Technological and physical–chemical properties, in vitro digestibility, and sensorial characteristics of fortified pasta were determined. The technological aspects of the products were peculiar, suggesting the existence of complex interactions between the gluten network and starch with debittered trub powder. The fortified pasta samples showed a lower glucose release than the control at the end of in vitro starch hydrolysis. Furthermore, in vitro protein digestion rose only in PT15. PT5 and PT10 samples overcame the sensory acceptability threshold of 5, while PT15 showed the lowest acceptability. Debittered trub represents a suitable ingredient in fortified fresh pasta formulation with an up to 10% substitution level without compromising the quality and sensory characteristics of the final product.

Frozen food sees a continuous increase in consumption thanks to the capability to preserve the organoleptic properties and, at the same time, to increase the shelf-life of the food itself. Therefore, a proper design of the freezing process is crucial and is strictly related to an accurate evaluation of freezing time because this establishes the minimum residence time of the product in a continuous freezer. For this reason, several mathematical models have been proposed and investigated for predicting the freezing time, starting from empirical models (lower accuracy and computational time) up to computational fluid dynamics simulation (higher accuracy and computational time). An excellent compromise between accuracy and computational effort seems to be a model that combines empirical laws for property evaluation and heat diffusion equation solved in one dimension. This model can numerically be solved using the method of lines in which spatial derivatives are discretized by the finite difference method and the resulting system of ordinary differential equations is integrated using an appropriate solver. This work aimed to fill some gaps to develop a comprehensive and more accurate model for freezing time prediction. Indeed, the key idea is to validate a model that could be used to optimize the refrigeration process for energy-saving and be the base for a design of experiment in case of lack of experimental data. The newly developed model includes the evaluation of freezing time for finite food shapes because, in some cases, it is not possible to assume a characteristic direction for heat flux. The property of unfrozen and frozen food (e.g. density, thermal conductivity, apparent specific heat, etc.) are evaluated basing on the principal constituent of food (e.g. water, fiber, protein, etc.), while heat transfer coefficient is evaluated using empirical equations, depending on adimensional numbers. In this way, it is possible to be flexible and not strictly related to the evaluation of the properties of food for each different case. The proposed model was validated with different sets of experimental data related to beef and strawberry pulp freezing. For these cases, the R2 index is equal to 0.982 and 0.996 respectively, showing a good agreement between experimental and predicted data. Finally, a case study of spinach cubes freezing was provided to show the potentiality of the novel model.

Gluten-free (GF) biscuits were prepared by replacing part of a GF flour mix (GFM) with 0, 15, 30 and 45 g/100 g (total flour) with a novel resistant starch-rich ingredient obtained from annealed white sorghum starch (RSWS). The chemical composition, physical characteristics, in vitro starch digestion and sensory evaluation of biscuits were considered. The chemical composition of samples was influenced by the addition of the RSWS. The highest total dietary fibre and RS contents (p < 0.05) were measured in 45-RSWS biscuits. The starch hydrolysis index values decreased when the level of RSWS increased in the composite. With regard to quality parameters, the use of RSWS influenced the hardness of the biscuits, and the highest value obtained for 45-RSWS. Some of the selected sensory attributes, along with the overall acceptability score, were negatively influenced by the RSWS addition, even if all remained above the limit of acceptability. The use of RSWS in GF biscuit formulation can contribute towards the creation of food products likely having slowly digestible starch properties, and this can be achieved without drastically compromising on the quality and sensory attributes.

This study evaluated the predicted glycemic index (pGI) in former food products (FFPs), and in two pig compound feeds formulated with or without the inclusion of FFPs. Six samples of FFPs and two pig compound feeds were used. FFPs were based on bakery and confectionary ex-food, while the pig compound feed was formulated by substituting 30% of cereals with FFPs (Feed FFP30%). All samples were analysed using an in vitro Englyst assay that simulates gastric and small intestinal digestion, and which has been proposed to determine the hydrolysis index (HI) and predict the glycemic index (pGI) of cereal-based foods introduced into pig diets. Corn meal, heat processed wheat and a conventional pig compound feed (Feed CTR) were included as control feed ingredients. In the assay, white bread was used as reference material. The results differentiated between two main groups of samples, namely: low HI samples with an HI lower than 100 including corn meal, Feed CTR, Feed FFP30%, flaked wheat and FFP4; and high HI samples including all the other FFPs tested. The same classification can be adopted for pGI. Thus combining HI and pGI results suggests that most of the FFPs tested in the present study were characterised by a high glycemic index potential which seems to be linked to the starch/sugars HI. The inclusion of FFPs in a commercial compound feed, and its effect on HI and pGI, merit further investigations.Highlights Ex-Food are food waste biomasses upgraded to feed ingredients; they are characterised by quick carbohydrates digestion and high glycemic index.

The valorisation and the reuse of agricultural residue and food waste are gaining more attention in the last years as are directly related to environmental sustainability. For this reason, the aim of this study is to evaluate the influence of autohydrolysis operating conditions for a high yield recovery of sugars, soluble fiber and antioxidants from grape skins. In this work, an experimental campaign using a lab-scale batch autohydrolysis reactor is scheduled based on statistical methods to assess the influence of some process variables (like water to skins solids ratio or working temperaure) on some selected key performance indicators (KPIs), like sugars, sugar degradation products, phenolic compounds, antioxidant compounds and fiber recovery. As a comparison, different agricultural residue, like wheat straw, are considered. Entering in the details, the volume of the recovered autohydrolysis liquid fraction is measured and analyzed to calculate the release yield of both total solids and specific components, including antioxidant activity according different in vitro assays tests such as and ABTS assay. Therefore, this work presents an innovate autohydrolysis process for the valorization of waste grape skins for the production of added-value compounds through a potentially green technology.

The phenolic profile of Goji berries from Italy and China was investigated through ultra-high-pressure liquid chromatography coupled with quadrupole-time-of-flight mass spectrometry. Hydroxycinnamic acids, followed by flavonols and flavanols, were the most representative phenolics, whereas glycoside forms of anthocyanins and flavonols were the compounds best discriminating between Chinese and Italian berries.A mix of dried berries was then subjected to in vitro gastro-intestinal digestion and fermentation to investigate the fate and bioaccessibility of phenolic compounds. The total phenolic content and the oxygen radical absorbance capacity recorded during the large intestine fermentation increased at 24 h, up to 1.56 mg gallic acid equivalents g−1 and 1.76 μmol trolox equivalents g−1, respectively. Multivariate statistics applied to phenolic profiling during the in vitro fermentation depicted those compounds having the highest bioaccessibility; stilbenes, alkyl-resorcinols and lignans were the best markers of Goji berries during in vitro fermentation.

Four different resistant starch (RS) type 3 (RS3; retrograded starch) and a RS type 2 (RS2; native high amylose maize starch) were in vitro digested and fermented by faecal inoculum. Total and individual short chain fatty acid (SCFA) production and associated kinetic parameters were assessed up to 20 h of in vitro fermentation. Total SCFA production was different (p < 0.05) among RS-rich ingredients, ranging from 7.43 to 8.72 mmol/g dry starch incubated. Differences (p < 0.05) were recorded for propionate and butyrate productions. Different (p < 0.05) half-time of total SCFA fermentation (T1/2), maximum rate of production (Rmax) and the time of occurrence (Tmax) values were measured among RS-rich ingredients, ranging from 3.3 to 5.6 h, from 1.06 to 1.85 mmol/g dry starch incubated per hour and from 2.6 to 4.9 h, respectively. Similar trends were measured considering the fermentative kinetics of individual SCFA. Present preliminary in vitro findings indicated that quantitative and qualitative production of SCFA, and inherent fermentation kinetics, were influenced by the type of RS. These findings are based on an in vitro approach, thus requiring in vivo trials.

Gluten-free (GF) pasta samples containing rice flour replaced with 0, 5, 10, 15 g/100 g (w/w) of a resistant starch ingredient from annealed sorghum starch (annRS) were formulated. The highest total dietary fiber and RS contents (p < 0.05) were measured in uncooked pasta with 15 g/100 g of annRS addition (15-annRS). After cooking, the 15-annRS pasta was characterized by an RS content of 5.8 g/100 g dry matter, confirming the thermal resistance of annRS. The use of annRS positively influenced the optimal cooking time, the cooking loss, the firmness, and the stickiness of the cooked samples, with not remarkably change in color after cooking. The starch hydrolysis index values decreased as the level of annRS increased. Despite a significant decrease in the overall sensory with increasing levels of annRS, all samples were characterized by a value > 5, which is considered the limit of acceptability. The use of annRS in GF pasta up to 15 g/100 g can contribute to creating GF products with high total dietary fiber content, slowly digestible starch properties, and without drastically compromising the sensory attributes.

Breads were prepared by substituting common wheat flour with 0 (GP0), 5 (GP5) and 10 (GP10) g/100 g (w/w) of grape pomace powder (GPP) and were analyzed for the phenolic profile bioaccessibility as well as the in vitro starch digestion during simulated digestion. The free and bound phenolic composition of native GPP and resulting breads were profiled using ultra-high-performance chromatography-quadrupole-time-of-flight (UHPLC-QTOF). The raw GPP was characterized by 190 polyphenols with the anthocyanins representing the most abundant class, accounting for 11.60 mg/g of cyanidin equivalents. Regarding the fortified bread, the greatest (p < 0.05) content in phenolic compounds was recorded for the GP10 sample (considering both bound and free fractions) being 127.76 mg/100 g dry matter (DM), followed by the GP5 (106.96 mg/100 g DM), and GP0 (63.76 mg/100 g DM). The use of GPP determined an increase of anthocyanins (considered the markers of the GPP inclusion), recording 20.98 mg/100 g DM in GP5 and 35.82 mg/100 g DM in GP10. The bioaccessibility of anthocyanins increased in both GP5 and GP10 breads when moving from the gastric to the small intestine in vitro digestion phase with an average value of 24%. Both the starch hydrolysis and the predicted glycemic index decreased with the progressive inclusion of GPP in bread. Present findings showed that GPP in bread could promote an antioxidant environment in the digestive tract and influence the in vitro starch digestion.

Grape pomace powder (GPP), a by-product from the winemaking process, was used to substitute flour for wheat bread fortification within 0, 5, and 10 g/100 g. Rheological properties of control and fortified doughs, along with physicochemical and nutritional characteristics, antioxidant activity, and the sensory analysis of the obtained bread were considered. The GPP addition influenced the doughs’ rheological properties by generating more tenacious and less extensible products. Concerning bread, pH values and volume of fortified products decreased as the GPP inclusion level increased in the recipe. Total phenolic compounds and the antioxidant capacity of bread samples, evaluated by FRAP (ferric reducing ability of plasma) and ABTS (2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid)) assays, increased with GPP addition. Moreover, the GPP inclusion level raised the total dietary fiber content of bread. Regarding sensory evaluation, GPP fortification had a major impact on the acidity, the global flavor, the astringency, and the wine smell of bread samples without affecting the overall bread acceptability. The current results suggest that GPP could be an attractive ingredient used to obtain fortified bread, as it is a source of fiber and polyphenols with potentially positive effects on human health.

Fresh pasta was formulated by replacing wheat semolina with 0, 5, 10, and 15 g/100 g (w/w) of Moringa oleifera L. leaf powder (MOLP). The samples (i.e., M0, M5, M10, and M15 as a function of the substitution level) were cooked by boiling. The changes in the phenolic bioaccessibility and the in vitro starch digestibility were considered. On the cooked-to-optimum samples, by means of ultra-high-performance liquid chromatography-quadrupole time-of-flight (UHPLC-QTOF) mass spectrometry, 152 polyphenols were putatively annotated with the greatest content recorded for M15 pasta, being 2.19 mg/g dry matter (p < 0.05). Multivariate statistics showed that stigmastanol ferulate (VIP score = 1.22) followed by isomeric forms of kaempferol (VIP scores = 1.19) and other phenolic acids (i.e., schottenol/sitosterol ferulate and 24-methylcholestanol ferulate) were the most affected compounds through the in vitro static digestion process. The inclusion of different levels of MOLP in the recipe increased the slowly digestible starch fractions and decreased the rapidly digestible starch fractions and the starch hydrolysis index of the cooked-to-optimum samples. The present results showed that MOLP could be considered a promising ingredient in fresh pasta formulation.

In this work, different commercial extra-virgin olive oils (EVOO) were subjected to in vitro gastrointestinal digestion and the changes in bioactive compounds were evaluated by ultra-high-pressure liquid chromatography coupled with quadrupole-time-of-flight mass spectrometry, using untargeted metabolomics. As expected, raw EVOO samples were abundant in total sterols (on average: 3007.4 mg equivalents/kg) and tyrosol equivalents (on average: 334.1 mg equivalents/kg). However, the UHPLC-QTOF screening allowed us to annotate 309 compounds, with a large abundance of sterols (219 compounds), followed by polyphenols (67 compounds) and terpenoids. The in vitro gastrointestinal digestion was found to affect the phytochemical composition of the different EVOO samples. In particular, both unsupervised and supervised statistics depicted the modifications of the bioactive profile following gastric and pancreatic phases. Overall, the compounds which resulted as the most affected by the in vitro digestion were flavonoids (cyanidin and luteolin equivalents), whilst relatively high % bioaccessibility values were recorded for tyrosol equivalents during the pancreatic phase (on average, 66%). In this regard, oleuropein-aglycone (i.e., the major phenolic compound in EVOO) was converted to hydroxytyrosol, moving from an average value of 1.3 (prior to the in vitro digestion) up to 9.7 mg equivalents/kg during the pancreatic step. As proposed in the literature, the increase in hydroxytyrosol might be the result of the combined effect of lipase(s) activity and acidic conditions. Taken together, the present findings corroborate the suitability of untargeted metabolomics coupled to in vitro digestion methods to investigate the bioaccessibility of phenolic compounds. In this regard, a significant impact of in vitro gastrointestinal digestion on polyphenolic profiles has been detected, thus suggesting the need to account for actual bioaccessibility values rather than just considering the amounts in the raw commodity.

Artichoke is a relevant source of health-promoting compounds such as polyphenols and sesquiterpene lactones. In this study, the bioaccessibility and gut bioavailability of artichoke constituents were evaluated by combining in vitro digestion and large intestine fermentation, metabolomics, and Caco-2 human intestinal cells model. Moreover, the ability of artichoke polyphenols to modulate the in vitro starch digestibility was also explored. An untargeted metabolomic approach based on liquid chromatography quadrupole-time-of-flight (UHPLC/QTOF) mass spectrometry coupled with multivariate statistics was used to comprehensively screen the phytochemical composition of raw, digested, and fermented artichoke. Overall, a large abundance of phenolic acids and sesquiterpene lactones was detected, being 13.77 and 11.99 mg·g−1, respectively. After 20 h of in vitro large intestine fermentation, a decrease in polyphenols and sesquiterpene lactones content was observed. The most abundant compounds characterizing the raw material (i.e., chlorogenic acid and cynaropicrin equivalents) showed an average % bioaccessibility of 1.6%. The highest % bioaccessibility values were recorded for flavonoids such as anthocyanin and flavone equivalents (on average, 13.6%). However, the relatively high bioavailability values recorded for flavonols, phenolic acids, and sesquiterpene lactones (from 71.6% up to 82.4%) demonstrated that these compounds are able to be transported through the Caco-2 monolayer. The phenolic compounds having the highest permeation rates through the Caco-2 model included low molecular weight phenolics such as tyrosol and 4-ethylcatechol; the isoflavonoids 3′-O-methylviolanone, equol 4′-O-glucuronide, and hydroxyisoflavone; together with the methyl and acetyl derivatives of glycosylated anthocyanins. Therefore, although human in vivo confirmatory trials are deemed possible, current findings provide insights into the mechanistic effects underlying artichoke polyphenols and sesquiterpenoids bioavailability following gastrointestinal and large intestine processes.

Ruminant diets include cereals, protein feeds, their by-products as well as hay and grass, grass/legume, whole-crop maize, small grain or sorghum silages. Furthermore, ruminants are annually or seasonally fed with grazed forage in many parts of the World. All these forages could be contaminated by several exometabolites of mycotoxigenic fungi that increase and diversify the risk of mycotoxin exposure in ruminants compared to swine and poultry that have less varied diets. Evidence suggests the greatest exposure for ruminants to some regulated mycotoxins (aflatoxins, trichothecenes, ochratoxin A, fumonisins and zearalenone) and to many other secondary metabolites produced by different species of Alternaria spp. (e.g., AAL toxins, alternariols, tenuazonic acid or 4Z-infectopyrone), Aspergillus flavus (e.g., kojic acid, cyclopiazonic acid or β-nitropropionic acid), Aspergillus fuminatus (e.g., gliotoxin, agroclavine, festuclavines or fumagillin), Penicillium roqueforti and P. paneum (e.g., mycophenolic acid, roquefortines, PR toxin or marcfortines) or Monascus ruber (citrinin and monacolins) could be mainly related to forage contamination. This review includes the knowledge of mycotoxin occurrence reported in the last 15 years, with special emphasis on mycotoxins detected in forages, and animal toxicological issues due to their ingestion. Strategies for preventing the problem of mycotoxin feed contamination under farm conditions are discussed.

Lectins, phytic acid and condensed tannins exert major antinutritional effects in common bean when grains are consumed as a staple food. In addition, phaseolin, i.e., the major storage protein of the bean seed, is marginally digested when introduced in the raw form. Our breeding target was to adjust the nutrient/antinutrient balance of the bean seed for obtaining a plant food with improved nutritional value for human consumption. In this study, the seeds of twelve phytohaemagglutinin-E-free bean lines carrying the mutations low phytic acid, phytohaemagglutinin-L-free, α-Amylase inhibitors-free, phaseolin-free, and reduced amount of condensed tannins, introgressed and differently combined in seven genetic groups, were analyzed for their nutrient composition. Inedited characteristics, such as a strong positive correlation (+0.839 **) between the genetic combination “Absence of phaseolin + Presence of the α-Amylase Inhibitors” and the amount of “accumulated iron and zinc”, were detected. Three lines carrying this genetic combination showed a much higher iron content than the baseline (+22.4%) and one of them in particular, achieved high level (+29.1%; 91.37 µg g−1) without any specific breeding intervention. If confirmed by scientific verification, the association of these genetic traits might be usefully exploited for raising iron and zinc seed content in a bean biofortification breeding program.

The present study investigated in a practical farm condition the response of two commercial maize hybrids (maturity class FAO rating 700) grown for silage production on chemical composition and digestibility of whole maize plant as consequence of a severe water irrigation reduction. Based on different irrigation applications, water restricted (WR) and fully irrigated (FI) plots received 50 and 200 mm of irrigation water, respectively. A split-plot factorial arrangement in a randomised complete block design with two main plots (WR and FI) and two sub-plots (hybrid A and B) with 12 replications/ treatment was performed. Studied parameters were dry matter (DM) yield, harvest index (HI), chemical composition, rumen in situ DM and neutral detergent fibre disappearance (DMD and NDFD, respectively), indigestible NDF (iNDF), 7h in vitro starch degradability (7hIVSD) and net energy (NE) for lactation content. Total DM and grain yields, HI and chemical composition differed (Pvs 56.4% DM) and NDFD (61.0 vs 58.4% NDFOM) were measured for FI with respect to WR crops, whereas iNDF was about 36% higher (P

Thirty multiparous lactating cows were divided in three groups based on milk yield: high (H), average (A) and low (L). Within each group, cows were randomly allotted to two levels of iodine inclusions into the diet and respectively: level 1 (1): base diet containing 1.55 mg/kg dry matter, level 2 (2): base diet plus 47.2 mg/d. Potassium iodide was used. Feeds, orts, drinking water and individual milk samples were collected and analysed for the iodine content. The iodine concentration and total excretion in milk were affected by the level of iodine supplementation (P

Hydrophobic prolamins are endosperm storage proteins accounting for about 40% of the total protein in most cereals seeds. Despite the absence of a reference method, several procedures have been periodically published to quantify prolamins in cereals. The aim of this study was to compare a conventional fractionation assay (LND) vs three other methods: one based on sequential extractions (HAM) and two rapid turbidimetric procedures (L&H and DRO). Prolamins were extracted in duplicate on barley, corn and wheat samples. For the turbidimetric prolamin evaluation in barley and wheat, a universally available purified gliadin, as alternative to purified zein, was also tested as standard reference material (SRM). The extraction prolamin values were different among grain types (P0.05). LND agreed sufficiently well both with HAM and with L&H methods (R2=0.664 and R2=0.703, respectively, P0.05), whereas a higher prolamin quantification was obtained using HAM (P

Hydrophobic prolamins are endosperm storage proteins accounting for about 40% of the total protein in most cereals seeds. Despite the absence of a reference method, several procedures have been periodically published to quantify prolamins in cereals. The aim of this study was to compare a conventional fractionation assay (LND) vs three other methods: one based on sequential extractions (HAM) and two rapid turbidimetric procedures (L&H and DRO). Prolamins were extracted in duplicate on barley, corn and wheat samples. For the turbidimetric prolamin evaluation in barley and wheat, a universally available purified gliadin, as alternative to purified zein, was also tested as standard reference material (SRM). The extraction prolamin values were different among grain types (P0.05). LND agreed sufficiently well both with HAM and with L&H methods (R2=0.664 and R2=0.703, respectively, P0.05), whereas a higher prolamin quantification was obtained using HAM (P