Search

The study was divided into 2 parts to investigate the acute postactivation performance enhancement (PAPE) responses to lower repetitions at the same load of 87% 1 repetition maximum (1RM) in the upper and lower body. In part 1, 14 athletes performed plyometric push-up (PPU) after the conditioning activity (CA) of bench press (BP). In part 2, 13 athletes performed a countermovement jump (CMJ) after the CA of parallel squat (PS). Subjects completed 3, 4, or 5 repetitions (trials CA-3, CA-4, or CA-5) of BP or PS in randomized and counterbalanced order. The velocity of each movement of the trial was recorded. The PPU or CMJ was tested every 2 minutes after the trial up to 12 minutes to assess the Post-Max and optimal individual PAPE time. The mean velocity of the last movement of BP in CA-5 was significantly lower than that in CA-3 (0.23 6 0.06 vs. 0.28 6 0.06 m·second-1, p, 0.05), and the velocity of PS in CA-4 or CA-5 was significantly lower than that in CA-3 (0.53 6 0.07 and 0.50 6 0.05 vs. 0.57 6 0.07 m·second-1, p, 0.05). The peak force of PPU and jump height of CMJ at Post-Max in the 3 trials were significantly greater than those at Pre (p, 0.05). There were no significant differences among trials in the optimal individual PAPE times in either part of the study. A single set of 87% 1RM resistance exercises with 3 or 4 repetitions in both the upper body and the lower body induces similar PAPE to repetition maximum. [ABSTRACT FROM AUTHOR]

This study investigated the effects of resistance training using cluster (CLUS) vs. traditional (TRAD) set structures on the accuracy of estimated repetitions to failure (ERF). Nineteen healthy male resistance trainers (age 21.0 ± 4.4 years) were randomized into 1 of the 2 bench press training routines performed for 6 weeks. Cluster (n = 10) performed 6 sets of = repetitions at 85% of 1 repetition maximum (1RM) with 30-second interrepetition rest and 3 minutes of interset rest. Traditional (n = 9) performed 3 sets of 5 repetitions at 85% 1RM with 5 minutes of interset rest. Maximum repetitions at 85% 1RM was performed before and after intervention to assess error in ERF and mean concentric velocity (MCV). The ERF, rating of perceived exertion, and maintenance of MCV were assessed throughout the intervention. Rating of perceived exertion was lower for sets 1-3 in CLUS compared with TRAD from weeks 1 to 4 (effect size [ES]=0.8-2.4, p&8804;0.04). The ERF was greater for sets 1-3 in CLUS than in TRAD during all intervention weeks (ES=1.0-5.1, p&8804;0.04). Maintenance of MCV was greater in CLUS compared with TRAD for all sets at week 1 (ES=0.76, p=0.002) and sets 4-6 at week 6 (ES=0.77, p=0.006). After the intervention, error in ERF did not change, and no differences were found between the groups. Findings indicate that accuracy of ERF does not improve after resistance training using set structures that induce different transient fatigue-related effects when using high loads in experienced resistance trainers. [ABSTRACT FROM AUTHOR]

This study aimed to compare the long-term effects of resistance training programs based on traditional and rest redistribution set configurations on explosive-strength and strength-endurance performance of lower-body and upper-body muscles. Thirty physically active men were randomly assigned to a traditional group (TRG: 6 sets of 5 repetitions with 3 minutes of interset rest) or a rest redistribution group (RRG: 30 sets of 1 repetition with 31 seconds of interrepetition rest). The training program lasted 6 weeks (2 sessions·wk−1), and in each training session, the squat and bench press exercises were performed with maximal concentric effort against approximately the 75% of the 1 repetition maximum. Before and after training, explosive-strength performance (peak velocity reached at submaximal loads during the countermovement jump and bench press throw) and strength-endurance performance (mean set velocity of 10 repetitions using both traditional and cluster sets in the squat and bench press) were assessed. Significant improvements in all dependent variables were observed after training for both the TRG (p ≤ 0.004; effect size [ES] = 0.63–3.06) and RRG (p ≤ 0.001; ES = 0.58–3.23). The magnitude of the changes was comparable for both groups with the only exception of the larger improvements observed in the RRG for the bench press mean set velocity using both traditional (ES = 0.77) and cluster (ES = 0.82) set configurations. Traditional and rest redistribution set configurations are equally effective to improve lower-body explosive strength, lower-body strength endurance, and upper-body explosive strength, whereas rest redistribution set configurations could induce greater adaptations in upper-body strength endurance. [ABSTRACT FROM AUTHOR]

Martins-Costa, HC, Lacerda, LT, Diniz, RCR, Lima, FV, Andrade, AGP, Peixoto, GH, Gomes, MC, Lanza, MB, Bemben, MG, and Chagas, MH. Equalization of training protocols by time under tension determines the magnitude of changes in strength and muscular hypertrophy. J Strength Cond Res 36(7): 1770–1780, 2022—The aim of this study was to investigate the effects of 2 training protocols equalized by tension (TUT) on maximal strength (1 repetition maximum [RM]), regional cross-sectional areas (proximal, middle, and distal), and total cross-sectional areas (sum of the regional cross-sectional areas) of the pectoralis major and triceps brachii muscles. Thirty-eight men untrained in resistance training participated in the study and were allocated under 3 conditions: Protocol 3s (n = 11; 12 repetitions; 3s repetition duration), Protocol 6s (n = 11; 6 repetitions; 6s repetition duration), and Control (n = 11; no training). Training protocols (10 weeks; bench press exercise) were equated for TUT (36 seconds per set), number of sets (3–4), intensity (50–55% of 1RM), and rest between sets (3 minutes). Analysis of variance was used to examine a percentage change in variables of interest across the 3 groups with an alpha level of 0.05 used to establish statistical significance. Protocols 3s and 6s showed no differences in the increase of total and regional muscle cross-sectional areas. There were no differences in regional hypertrophy of the pectoralis major muscle. In the triceps brachii muscle, the increase in distal cross-sectional area was greater when compared with the middle and proximal regions. Both experimental groups had similar increases in the 1RM test. In conclusion, training protocols with the same TUT promote similar strength gains and muscle hypertrophy. Moreover, considering that the protocols used different numbers of repetitions, the results indicate that training volumes cannot be considered separately from TUT when evaluating neuromuscular adaptations. [ABSTRACT FROM AUTHOR]

Travis, SK, Mujika, I, Zwetsloot, KA, Gentles, JA, Stone, MH, and Bazyler, CD. The effects of 3 vs. 5 days of training cessation on maximal strength. J Strength Cond Res 36(3): 633-640, 2022-The purpose of this study was to compare the effects of 3 vs. 5 days of training cessation on body composition, perceived recovery and stress state, and maximal strength. Nineteen strength-trained athletes (23.8 +/- 4.1 year; 90.8 +/- 20.7 kg; 174.2 +/- 7.3 cm) completed a powerlifting specific 4-week training block followed by either 3 or 5 days of training cessation. During the 4-week training block, athletes were trained 3 days per week, performing 3-4 movements that included at least 2-3 competition lifts per session while performing 4-5 sets of 3-5 repetitions with intensity ranging from 75 to 100% 1 repetition maximum (1RM). Body composition, psychometric measures, upper-body maximal strength, and lower-body maximal strength were assessed before (T1) and after 4 weeks of training (T2) and at 3 or 5 days of training cessation (T3). The alpha level was set at p < 0.05. After the 4-week training block (T1 to T2), trivial significant increases in body mass (p = 0.016, Hedge's g = 0.04) and bench press 1RM (p = 0.01, g = 0.16) were observed, as well as small significant increases in back squat 1RM (p < 0.001, g = 0.23), deadlift 1RM (p = 0.003, g = 0.20), powerlifting total (p < 0.001, g = 0.21), and Wilks Score (p < 0.001, g = 0.27). There were no significant differences between groups for isometric back squat performance, psychometric measures, and body composition after training cessation (T2-T3). However, small significant decreases in isometric bench press performance were observed after 5 days (p < 0.001, g = 0.16), but not 3 days of training cessation. The results of this study suggest maximal lower-body strength can be preserved during 3 and 5 days of training cessation, but maximal upper-body strength is only preserved for 3 days after 4 weeks of strength training in athletes. [ABSTRACT FROM AUTHOR]

Maximum strength and speed strength are 2 major factors that determine a swimmer’s performance, including swim start and turn performance, which directly impacts overall swim sprint performance. Nevertheless, data regarding the relationship between swimming performance and maximum strength are not consistent. Specifically, there are minimal data examining the relationship between maximal strength levels, start and turn performances in the scientific literature. This study was designed to determine the relationship between strength and specific markers of swim performance. Therefore, 14 moderate trained swimmers (male; 17.5± 1.6 years; mass: 70.2 ± 4.8 kg; height: 181.9 ± 5.7 cm) were tested for maximum strength in back squat and bench press, squat and countermovement jump performance, tethered swimming and swim performance (50- and 100-m crawl sprint, where start and turn performances were also analyzed). A multiple regression analysis was performed using the maximum strength data as predictors of 15-m start performance and swimming power. Furthermore, bivariate Pearson correlation analyses were used to assess the relationship between the strength and power variables and the swim variables. Maximum strength in the bench press and squat explained 50–65% of the performance variance in swimming power and start performance and 45–62% of the performance variance in 50-/100-m swimming performance. The results of this study demonstrated that maximum strength of the upper and lower limbs and jump height were strongly related to sprint swim performance. Therefore, maximum strength in squat and bench press should be included in strength tests, and that swimmers should incorporate lower- and upper-body strength and power training into their training schedule. [ABSTRACT FROM AUTHOR]

The FitroDyne and GymAware rotary encoders are being increasingly used in resistance training to monitor movement velocity, but how closely their velocity outcomes agree is unknown. Consequently, this study aimed to determine the level of agreement between the FitroDyne and GymAware for the assessment of movement velocity in 3 resistance training exercises. Fifteen men performed 3 repetitions of bench press, back squat, and bentover-row exercises at 10% 1 repetition maximum increments (from 20 to 80%). For each repetition, the FitroDyne and GymAware recorded peak and mean barbell velocity (cm·s-1). Although strongly correlated (r = 0.79-1.00), peak velocity values for the GymAware were significantly lower than the FitroDyne for all exercises and loads. Importantly, the random errors between the devices, quantified through Bland and Altman's 95% limits of agreement, were unacceptable, ranging from 63.8 to 25.9 cm·s-1. Differences in mean velocity were smaller (and nonsignificant for most comparisons) and highly correlated (r = 0.86-1.00) between devices. Notwithstanding smaller random errors than for the peak values, mean values still reflected poor agreement (random errors between ±2.1 and 12.0 cm·s-1). These findings suggest that the FitroDyne and GymAware cannot record peak or mean velocity with acceptable agreement and should neither be used interchangeably nor their data compared. [ABSTRACT FROM AUTHOR]

The purpose of this study was to determine skeletal muscle adaptations (strength and hypertrophy) in response to volume-equated resistance training with divergent repetition strategies. Forty-two men were randomly assigned to 4 groups: higher load-lower repetition group performing 4 repetition maximum (RM) for 7 sets (4RM, n = 10), intermediate load-intermediate repetition group performing 8RM for 4 sets (8RM, n = 12), lower load-higher repetition group performing 12RM for 3 sets (12RM, n = 10), and nonexercising control group (CON, n = 10). The volume of the pectoralis major muscle (by magnetic resonance imaging) and 1 RM of the bench press were measured before and after 10 weeks of training (2 times per week). No significant difference was observed in the relative increase in the muscle volume among the 4RM, 8RM, and 12RM groups. The relative increase in 1 RM was significantly lower in the 12RM group than in the 4RM group (p = 0.029) and the 8RM group (p = 0.021). The relative increase in 1RM was significantly correlated with that in the muscle volume in the 12RM group (r = 0.684, p = 0.042), but not in the 4RM (r = -0.265, p = 0.777) or8RM (r = -0.045, p = 0.889) groups. These results suggest that the increase in muscle size is similar among the 3 training protocols when the training volume was equated, whereas the increase in muscle strength is lower with the 12RM protocol than the other protocols. [ABSTRACT FROM AUTHOR]

Resistance training has been widely used for maintaining or improving the quality of life and sports performance. It is not clear, however, whether the load commonly used in these exercises is equivalent to the number of repetitions determined for execution, that is, the level of effort applied to the self-selected load. Ergo, the aim of this study was to identify the number of maximum repetitions that strength training practitioners can perform with the load commonly used (self-selected) to perform 10 repetitions in their training routines. The sample consisted of 160 healthy trained men (25.7 6 4.5 years, 81.2 6 10.4 kg, 177.9 6 6.2 cm). Subjects answered the question “What weight do you usually lift for 10 repetitions on free-weight bench press exercise?” The answer was considered the self-selected 10 repetitions load (S10RL). After a brief warm-up, each individual was instructed to perform as many repetitions as possible at S10RL (repetition maximum [RMS10RL]) at a single bout of free-weight bench press. The RMS10RL was analyzed with the single sample t test, adopting the reference value of 10 repetitions. Individuals performed 16 6 5RMS10RL (median = 15), which represent a statistical difference for the 10-repetition reference value (p, 0.001). The most prevalent RMS10RL range was from 13 to 15 repetitions (31%), and only 22% performed between 10 and 12 repetitions. It was concluded that most individuals can perform a number of repetitions well above the 10 repetitions predicted for the selected load. Therefore, the training routines are not compatible with maximum effort. [ABSTRACT FROM AUTHOR]

To determine if chain bench press (BP) exercise would enhance acute upper-body force and power, 13 collegiate male wrestlers (mean ± SD; 20.5 ± 1 years; 174.3 ± 4.2 cm; 76.5 ± 8.3 kg) with ≥1 year of strength training participated. Session 1 included body composition ([BodPod] 8.5 ± 2.6% body fat), 3 repetition maximum (RM) BP, and familiarization with the plyometric push-up (PPU) on a force plate. Athletes were matched for 3RM BP and randomly assigned to 1 of 2 groups: Chain BP or Plate BP. One week after session 1, athletes performed the experimental protocol that consisted of: Baseline PPU, Chain/Plate BP set 1 (6 reps @ 60%), 30 seconds rest, PPU, 3 minutes rest, Chain/Plate BP set 2 (6 reps @60%), 30 seconds rest, and PPU. Independent samples t-tests analyzed physical characteristics (p ≤ 0.05). Standardized magnitude-based inferences were used to define outcomes. Aside from age (Plate BP 21.4 ± 0.8, Chain BP 19.9 ± 0.7 years), no physical differences were observed. Performance of Chain BP and Plate BP resulted in a likely (likelihoods of benefit/trivial/harm relative to the threshold for a smallest worthwhile benefit of 89 W: 0.5/9.2/90.3) and very likely (0.1/0.8/99.1) negative effect on peak power output in the PPU after set 1. Chain BP resulted in a likely positive effect on peak force in the PPU after set 1 (smallest worthwhile benefit 13 N: 82.8/16.9/0.3) and set 2 (94.7/5.2/0.1). Chain BP did not result in higher upper-body power over traditional plate loaded resistances. [ABSTRACT FROM AUTHOR]

Fahs, CA, Blumkaitis, JC, and Rossow, LM. Factors related to average concentric velocity of four barbell exercises at various loads. J Strength Cond Res 33(3): 597-605, 2019-The resistance exercise load is the primarily determinant of the average concentric velocity (ACV) during a repetition. It is unknown whether individual factors such as training experience or anthropometries also influence the ACV. Previous research has shown the ACV during the 1 repetition maximum (1RM) varies between exercises, but it is not clear whether ACV is different between exercises at various percentages of the 1 RM. This information could provide practical guidelines for trainees using ACV to select training loads. Therefore, the purpose of this study was to determine whether training age, current training frequency, limb length, height, and relative strength are related to ACV at loads between 35 and 100% of the 1 RM for the squat, bench press, deadlift, and overhead press. A secondary purpose was to compare the ACV values between the 4 lifts at each relative load. Fifty-one (18 women and 33 men) completed 2 testing sessions in which the squat, bench press, deadlift, and overhead press ACV were measured during a modified 1 RM protocol. Average concentric velocity values were significantly different among the 4 lifts (p < 0.05) at all relative loads between 35 and 100% 1 RM except for 55% 1RM (p = 0.112). Generally, compared at the same relative loads, the overhead press exhibited the greatest ACV followed by the squat, bench press, and deadlift (in order). In addition, relative strength level was inversely related to ACV at maximal loads (>95% 1 RM) for the squat, bench press, and deadlift while height was positively related to ACV at moderate loads (55% 1 RM) for all lifts (p < 0.05). These results suggest that the load-velocity profile is unique for each of these exercises, and that velocity ranges used for exercise prescription should be specific to the exercise. A trainee's relative strength and height may be a primary influence on the ACV. [ABSTRACT FROM AUTHOR]

Renals, L, Lake, J, Keogh, J, and Austin, K. Strongman log push press: The effect log diameter has on force-time characteristics. J Strength Cond Res 32(10): 2693–2700, 2018—Strongman training is becoming more common in strength and conditioning practices, particularly the log press. The existing literature analyzes force characteristics of the log clean and jerk or press compared with the weightlifting clean and jerk exercise. This investigation aims to explore the braking and propulsive phase performance characteristics of the push press with a barbell and strongman logs of different sizes. Ten experienced athletes volunteered to perform the push press exercise using 65% of their 1 repetition maximum using a small-diameter log, a large-diameter log, and a barbell. Analysis of variance showed a significant difference in all mean braking and propulsive characteristics (force, velocity, power, impulse, and displacement) between the barbell and both logs but there was no difference in lift duration. Comparison between both logs showed that the small log had significantly greater power (6%, p = 0.01), velocity (2%, p = 0.01), impulse (5%, p = 0.03), and force (3%, p = 0.01) but no difference in center of mass displacement or lift duration. In addition, propulsive phase when using the barbell was 4.4 times greater in force, 2.2 times in impulse, 1.8 times in velocity, and 2.3 times in power, and this was greater when compared with the larger diameter log. The athletes achieved larger propulsive outputs with a barbell over a log in the push press exercise in addition to showing a higher mechanical demand with a log that increases the larger log diameter, which may mean that the athlete needs to adapt loads when looking to optimize training parameters. [ABSTRACT FROM AUTHOR]

Harden, M, Wolf, A, Russell, M, Hicks, KM, French, D, and Howatson, G. An evaluation of supramaximally loaded eccentric leg press exercise. J Strength Cond Res 32(10): 2708–2714, 2018—High-intensity eccentric exercise is a potent stimulus for neuromuscular adaptation. A greater understanding of the mechanical stimuli afforded by this exercise will aid the prescription of future eccentric training regimens. This study sought to investigate the mechanical characteristics of supramaximally loaded eccentric exercise when using a custom-built leg press machine. Using a within-subject, repeated-measures design, 15 strength trained subjects (age, 31 ± 7 years; height, 180.0 ± 6.8 cm; body mass, 81.5 ± 13.9 kg) were assessed under 3 different conditions: low (LO), moderate (MOD), and high (HI) intensity, which were equivalent in intensity to 110, 130, and 150%, respectively, of peak force during an isometric maximal voluntary contraction (IMVC) performed on leg press at 90° knee flexion. All loading conditions demonstrated a similar pattern of mechanical profile; however, the variables underpinning each profile showed significant (p < 0.01) load-dependent response (LO vs. MOD, MOD vs. HI, LO vs. HI) for all variables, except for average acceleration. Average force associated with each loading conditions exceeded IMVC but equated to a lower intensity than what was prescribed. Repetitions under higher relative load intensity stimulated greater average force output, faster descent velocity, greater magnitude of acceleration, shorter time under tension, and a decline in force output at the end range of motion. This research provides new data regarding the fundamental mechanical characteristics underpinning supramaximally loaded eccentric leg press exercise. The information gathered in the study provides a foundation for practitioners to consider when devising loading strategies and implementing or evaluating supramaximally loaded eccentric exercise when using a similar exercise and device. [ABSTRACT FROM AUTHOR]

The article reports on research which was conducted to investigate the relationship between physical performance, epinephrine, and melatonin concentrations in the early morning and late afternoon in elite collegiate male track and field athletes. Researchers evaluated several jumpers and sprinters. They found that a preworkout elevation of epinephrine may offset concentrations of melatonin in the morning and help track athletes maintain maximum muscle force and power and that quickness and power were worse in athletes in the morning.

The article reports on research which investigated the effect that short term eccentric exercise training which used a custom-made isokinetic leg press device had on concentric and eccentric strength, explosiveness and jumping performance in healthy male subjects. Researchers evaluated 19 subjects They found that the training program led to large increases in concentric strength, jumping performance and eccentric strength.

The article presents a study on the relationship between maximal oxygen consumption (Vo2max) and acute resistance exercise performance, as well as the maximal aerobic capacity and acute metabolic effects of exercise sequencing, with a focus on rest interval (RI) lengths. Resistance training, athletic performance, and strength testing are also discussed.

The article presents a study on the effects of instability resistance training on upper-body muscle activation during a during a barbell (BB) (coupled) and dumbbell (DB) (uncoupled) chest press exercise. Topics include electromyography (EMG) amplitude, repetition maximum (RM), and measurements of the pectoralis major (PM), triceps brachii, anterior deltoid (AD), and rectus abdominis (RA).

The article reports on research conducted to investigate the reliability and smallest worthwhile difference in the National Football League-225 test in National Collegiate Athletic Association division one football players. Researchers evaluated the test with 72 players. They found that a small technical error provided strong reliability and that the smallest worthwhile difference suggested that change in performance of three repetitions or more after training would improve the test's performance.

The article reports on research which was conducted to compare the training and physical performance of police students at the start and end of their three year police education. Researchers evaluated 235 students with a survey. They found that following their education students' maximum strength training and performance in strength related physical tests increased and that endurance and sprint training decreased.

The article reports on research conducted to investigate the effect of resistance exercise selection on the acute hormonal response using similar lower-body multijoint movement free weight and machine weight exercises. Researchers evaluated resistance training with 10 male subjects. They found that free weight exercises seem to induce greater hormonal responses to resistance exercise than machine weight exercises using similar lower-body multijoint movements and primary movers.

Research is presented that examined a jaw-aligning mouthpiece's effect on the power and strength measures of 21 young men who performed a countermovement jump (CMVJ) from a force platform and 1 repetition maximum (1RM) bench press exercise with and without the mouthpiece. The study found no significant differences concerning CMVJ height, rate of force development, peak vertical force, and 1RM bench press, noting that this particular mouthpiece does not produce an ergogenic effect on performance.

The article discusses a study which was aimed to evaluate the effect of training status on differences between trials of 1 repetition maximum (1 RM) measurement in women. The study was conducted o 10 women who completed 3 trials of 1RM chest and leg press. The study suggested that training status has a positive influence on the efficiency of maximal strength measurement.

The article discusses a study which was aimed to compare electromyogram activity (EMG) and one-repetition maximum (1-RM) in barbell and dumbbell shoulder presses performed seated and standing. The study included 15 healthy men who volunteered for 1-RM and EMG testing. The study concluded that the exercise with the greatest stability requirement showed the highest neuromuscular activity of the deltoid muscles.

The article presents information on a study aimed at testing the outcome of strength and power by using randomized groups design. The study showed that there were no significant differences between the strength and endurance (SE) and strength, endurance, and maximal-effort cycling (SEC) group on measures of chest press or standing broad jump performance.

The article discusses research which was conducted to investigate the effect three chestpress exercises with different degrees of freedom had upon the sticking region and muscle activity in maximal attempts. Researchers evaluated 11 male subjects. They found that the men achieved the highest one repetition maximum strength using the free barbell followed by the Smith machine and dumbbells and also found muscle activity differences between the three different exercises.

The article reports on research conducted to compare four different loading schemes for four exercises to determine the extent of progressive load reductions necessary to maintain repetition performance. Researchers evaluated 32 recreationally trained women. They found that a resistance training prescription that involves one-minute rest intervals between multiple 10 repetition maximum sets requires load reductions to maintain repetition performance.

The article discusses research investigating the relationship between heat extraction from the palm, work volume, and strength training responses to resistive exercise. Topics include an overview of the study's experimental design, results of core temperature and work volume measurements, and the study's conclusion regarding the effects of palm cooling on work volume and the link between core temperature and fatigue onset during resistive exercise.

The article discusses research investigating the magnitude of changes in upper and lower body strength in highly trained professional rugby union players following two years of training. The study's experimental design and the authors' conclusion regarding the influence of starting strength level, lean mass index (LMI), and chronological age on the level of strength changes are presented.

The article reports on research which was conducted to investigate the effect medicine ball training had on the strength and power of young female handball athletes. Researchers compared 11 players who participated in training with 10 who did not. They found that the training program led to sport-specific training improvements in young female handball players.

The article reports on research conducted to evaluate whether the rating of perceived exertion (RPE) scale would predict a broad range of explosive resistance training (ERT) intensities on the leg press in 21 older adults. Researchers found that the load-RPE relationship may simplify the regulation of intensity of ERT with older adults on the leg press, where the exercising older adult could be guided to select loads according to their RPE.

The author discusses a study which has identified that the motor ability of National Football League (NFL) players must be measured through test batteries in the U.S. He states that upper body strength has minimal impact on bench press performance with reduced correlation coefficients. The author notes that the analysis of variance has been enhanced by coefficients of determination.

A study on the validity of the Myotest®'s measurement of force and power production during squat and bench press exercises is presented. The Myotest® measurements are compared with those from a computerized linear transducer and force platform system. The Myotest® is valid when fixed on the vertical axis bar.

The article focuses on research conducted to assess the effect different resistance exercise scheme (RES) designs of similar total of load lifted had on the responses of testosterone, cortisol, and creatine kinase in male athletes. Researchers evaluated 27 athletes who performed one of four bench press workouts. They found that in general, testosterone and cortisol showed little change within or between the different types of workouts.

The article presents the results of a study which investigated the total energy expenditure associated with bench pressing on a Smith machine. Details of the experimental protocol, which involved measurements of oxygen uptake and blood lactate, are presented. It was found that a reasonable estimate of energy expenditure could be calculated using this procedure.

The article presents the results of a study which investigated the effects of low-intensity weight training exercises on blood pressure. An overview of related previous research is provided, along with details of the experimental protocol, which included exercises such as the bench press and the squat. It was found that post-exercise blood pressure was reduced under clinic conditions, but not significantly for the group under ambulatory conditions.

The purpose of the present investigation was to determine if significant differences exist among 3 different periodization programs in eliciting changes in strength. Twenty-eight recreationally trained college-aged volunteers (mean = SD; 22.29 = 3.98) of both genders were tested for bench press, leg press, body fat percentage, chest circumference, and thigh circumference during initial testing. After initial testing, subjects were randomly assigned to 1 of 3 training groups: (a) linear periodization (n = 9), (b) daily undulating periodization (n = 10), or (c) weekly undulating periodization (n = 9). The training regimen for each group consisted of a 9-week, 3-day-per-week program. Training loads were assigned as heavy (90%, 4 repetition maximum [4RM]), medium (85%, 6RM), or light (80%, 8RM) for bench press and leg press exercises. Subjects were familiarized with the CR-10 rated perceived exertion scale and instructed to achieve an 8 or 9 on the final repetition of each set for all other exercises. Subjects were then retested after 4 weeks of training. Training loads were then adjusted according to the new 1RM. Subjects were then retested after 5 more weeks of exercise. For all subjects, significant (p < 0.05) increases in bench press and leg press strength were demonstrated at all time points (T1-T3). No significant differences (p > 0.05) were observed between groups for bench press, leg press, body fat percentage, chest circumference, or thigh circumference at all time points. These results indicate that no separation based on periodization model is seen in early-phase training. [ABSTRACT FROM AUTHOR]

The purpose of this study was to compare the effects of 10 weeks of resistance training with an isotonic bench press machine and 2 types of free-weight bench press exercises on several measures bench press strength. Specificity was investigated by comparing the ability to transfer strength gained from a type of training that differed from the mode of testing. Forty-nine men participated in the study. The subjects completed a pretest on the machine (MB), barbell (BB), isokinetic (IB), and log (LB) bench press to determine baseline strength and completed 10 weeks of training on the MB, BB, or LB. The 3 groups were tested to see whether differential training effects occurred from pre- to post- test scores on the BB, MB, LB, and peak force on the IB. By multivariate analysis, the trial-by-group interaction was not statistically significant. The multivariate and subsequent univariate analyses of variance tests indicated statistically significant effects from pre- to posttest for peak force on the IB test and the BB, MB, and LB. Correlations among the strength tests were high (0.92 ≥ r ≤ 0.97) and moderate between the strength tests and IB peak force (0.62 ≥ r ≤ 0.83). Mean 3 repetition maximum MB strength was 8% higher than BB strength, which was 3% higher than LB strength, indicating differences in the amount of stabilization required to control the resistance. The findings of this study showed that all 3 training groups significantly improved in strength during short-term training on the MB, BB, and LB. These data lend evidence that improved strength after training on the MB, BB, and LB equally transfers to strength gains on any of the 4 modes of testing. These results should be considered when including similar exercises varying in stability into the training program to improve strength. [ABSTRACT FROM AUTHOR]