Search

To effectively solve the crosstalk issue in high-density crossbar array (CBA), high rectifying characteristics should be introduced in the resistance random-access memory (ReRAM) device, and in-depth understanding of the affecting factors on rectifying properties is essential for the large-scale application of ReRAM. In this paper, a high-performance self-rectifying device with CMOS compatible Pd/HfO2/TaOx/Ta structure was demonstrated in a 1-kb CBA. Forming-free, self-compliance, and high uniformity characteristics were successfully achieved. By modulating the thickness of the HfO2 rectifying layer, the rectifying ratio of device could be achieved as high as $\sim 2\times 10^{\textsf {3}}$ under ±3 V at low-resistance state (LRS). It was also experimentally confirmed that the selected unit cell in high-resistance state (logically the “ OFF” state) was stably readable when it was surrounded by unselected LRS (logically the “ ON” state) cells, in an array of up to $32 \times 32$ cells. Furthermore, a model based on interfacial barrier modulation and defects trapping/detrapping was proposed to elucidate the impact of the dielectric thickness on the self-rectifying characteristics of the device. The results presented in this paper provide a great potential for selector-free high-density memory applications. [ABSTRACT FROM AUTHOR]

Magnetic tunnel junctions (MTJs) with low switching current, high thermal stability, and small device size are strongly preferred for low-power, high-reliability, and high-density spintronic memory and logic applications. The research of MTJs from shape in-plane magnetic anisotropy to interfacial perpendicular magnetic anisotropy (i-PMA) has successfully paved the way down to 20-nm scale, below which, however, the i-PMA approach reaches a physical limit in sustaining sufficient thermal stability while achieving low-power spin transfer torque switching. Recently, studies have been reported a new approach to pave the way toward sub-10-nm MTJs satisfying the requirements by revisiting shape perpendicular magnetic anisotropy (s-PMA). In this paper, we present a compact model of the sub-10-nm s-PMA MTJ device, which captures both the static and dynamic physical behaviors. This model is SPICE-compatible for hybrid MTJ/CMOS circuit designs. This paper is expected to push forward the development of sub-10-nm-scale MTJ-based spintronic memory and logic circuits. [ABSTRACT FROM AUTHOR]

The physical unclonable function (PUF) is a promising innovative hardware security primitive that leverages the inherent randomness in the physical systems to produce unique responses upon the inquiry of challenges, thus the PUF could serve as a fingerprint for device authentication. In this paper, we propose a novel PUF implementation exploiting the sneak paths in the resistive cross-point (X-point) array, as a hardware security primitive. The entanglement of the sneak paths in the X-point array greatly enhances the entropy of the physical system, thereby increasing the space of challenge-response pairs to make a strong PUF. The X-point PUF characteristics, such as uniqueness and reliability, are experimentally evaluated on the fabricated $12 \times 12$ cross-point arrays based on the Pt/HfOx/TiN structure. The measurement results show that the average inter-Hamming distance of the response bits is around 46.2% across 28 different arrays, showing sufficient uniqueness. The measurement results also demonstrate that 0% intra-Hamming distance (or 100% reliability) of the response bits can be maintained more than 7.2 h at 100 °C (or equivalently ten years at 40 °C). This paper demonstrates the feasibility of using X-point PUF as a lightweight and reliable PUF for device authentication. [ABSTRACT FROM PUBLISHER]

Ferroelectric (FE) materials are being studied for a variety of applications in memory, logic, and neuromorphic computing, for which predictive models of FE polarization are essential. In this paper, we present a Monte Carlo simulation framework capable of predicting the dynamic, history-dependent response of an FE under arbitrary input waveforms. The simulation is developed by generalizing the physics-based nucleation-limited switching model for polarization reversal in a polycrystalline FE. Measured polarization reversal data from fabricated FE Hf0.5Zr0.5O2 capacitors are used to extract the statistical distribution of FE grains. After parameter extraction, the model is able to predict the dynamics of the FE capacitor without further calibration. Finally, the model is applied to characterize the dynamic response of FE–dielectric bilayer structures and quantify the reduction in memory window due to device variability. [ABSTRACT FROM AUTHOR]

In this paper, an improved 4H-SiC U-shaped trench-gate metal–oxide–semiconductor field-effect transistors (UMOSFETs) structure with low ON-resistance (${R}_{ \mathrm{\scriptscriptstyle ON}}$) and switching energy loss is proposed. The novel structure features an added n-type region, which reduces ON-resistance of the device significantly while maintaining the breakdown voltage (${V}_{\textsf {BR}}$). In addition, the gate of the improved structure is designed as a p-n junction to reduce the switching energy loss. Simulations by Sentaurus TCAD are carried out to reveal the working mechanism of this improved structure. For the static performance, the ON-resistance and the figure of merit (FOM $= {V}_{\textsf {BR}}^{\textsf {2}}/{R}_{ \mathrm{\scriptscriptstyle ON}}$) of the optimized structure are improved by 40% and 44%, respectively, as compared to a conventional trench MOSFET without the added n-type region and modified gate. For the dynamic performance, the turn-on time (${T}_{ \mathrm{\scriptscriptstyle ON}}$) and turn-off time (${T}_{ \mathrm{\scriptscriptstyle OFF}}$) of the proposed structure are both shorter than that of the conventional structure, bringing a 43% and 30% reduction in turn-on energy loss and total switching energy loss (${E}_{\mathbf {SW}}$). [ABSTRACT FROM AUTHOR]

Ferroelectric and negative-capacitance field-effect transistors (FeFETs and NCFETs) have recently garnered great attention as devices for applications in memory and low-power logic, respectively. As these technologies are pursued, it is critical to have a variety of measurement approaches, including methods familiar to the electron-device and microwave communities that can aid in fully understanding the behavior of ferroelectrics in FeFETs and NCFETs. In this paper, we propose and show the viability of using frequency-domain electrical measurement techniques employing the well-known microwave S-parameters, and their large-signal generalization and X-parameters. Our methods provide the means to trace the intrinsic polarization versus electric-field curve of the ferroelectric, i.e., with the parasitics de-embedded, thereby showing the innate ferroelectric response, which cannot be done using conventional techniques. These methods also enable extraction of all the parameters of the Landau–Khalatnikov equation, which is commonly used to model ferroelectric behavior in FeFETs and NCFETs. This paper hence takes a useful step toward methods familiar to the electron-device community that can help to better understand and optimize FeFET and NCFET technologies. [ABSTRACT FROM AUTHOR]

This paper investigates the issues of oxygen accumulation and variation in the high-resistance state of HfO2-based resistive random access memory (RRAM), with improvement attained by inserting a thin oxygen-vacancy-rich layer of indium-tin-oxide (ITO) film. By acting as the oxygen ion reservoir, this ITO thin film on the TiN electrode can further stabilize resistance switching (RS) characteristics. In terms of reliability, ac endurance, and retention tests confirm stable RS characteristics for the Pt/HfO2/ITO/TiN device. Finally, a conducting model was proposed to explain the influence of the ITO thin layer and clarify the physical mechanism of electrical improvements. [ABSTRACT FROM AUTHOR]

Feedback field-effect transistor (FBFET), an alternative switching device, has received attention due to its ideal steep switching feature. By utilizing the positive feedback phenomenon, the total amount of electrons and holes contributing to drain current is sharply surged. Although the device has conspicuous subthreshold slope (SS) properties, advanced research for structure and performance of it is lacking. In this paper, single-gated and spacer-less silicon-on-insulator (SOI) FBFET with extremely steep switching (~1 mV/decade) characteristic is studied in various aspects; SS attribute, performance variation of scaled FBFET, the impact of structural variation, the gate margin for the device layout, and the hysteresis window. The prospect of SOI FBFET as a future candidate for CMOS logic application is investigated in detail. [ABSTRACT FROM AUTHOR]

In this paper, the NbOx, which was regarded as a promising material based on its insulator–metal transition (IMT) effects, was applied as the switching layer of the device. The threshold switching characteristics were comprehensively investigated with particular emphasis on temperature dependence. The conduction mechanism for high-resistance state (HRS) was fitted and verified to be Schottky emission. With the increase in temperature, the fitting results demonstrated that the Schottky barrier decreased, leading to a reduction in the resistance of HRS. Furthermore, according to Fourier’s law of heat conduction, the fluctuation range of temperature was smaller, causing a narrow distribution of the threshold voltage as the operating temperature increased. In addition, the increasing temperature caused high energy of electrons, which would induce an IMT more easily, leading to a lower threshold voltage. This paper provided the promise for improving the thermal stability of selected devices. [ABSTRACT FROM AUTHOR]

In-memory computing architecture is an emerging revolutionary computing paradigm that can break the von Neumann bottleneck. Computing methodology and circuit codesign using the CMOS compatible 1T1R resistive random access memory (RRAM) integration structure is presented in this paper. Functionally complete Boolean logic and arithmetic functions are experimentally demonstrated. With a single 40-nm CMOS process 1T1R unit, each of the 16 binary logics can be realized in two logic steps with an additional readout step for cascading, which shows functional reconfiguration and low computational complexity. Up to 107 cycles of NAND and XOR logic operations are performed to validate the correctness and reliability. Moreover, several fundamental adder circuits are designed and experimentally demonstrated in 1T1R devices as the proof of concept of the 1T1R computing architecture. The adders proposed in this paper include a ripple-carry adder and its optimized design and a carry-select adder, which all show promising advantages in nonvolatility, computation speed, and circuit area. This paper reports the most complex yet efficient RRAM-based 8-bit addition function experimentally so far and lays a solid foundation for constructing the future in-memory computing architecture. [ABSTRACT FROM AUTHOR]

The introduction of metal nanocrystals (NCs) has been confirmed to improve electrical uniformity of oxide-based resistive random access memory (RRAM) devices significantly; however, the current reports do not systematically elucidate the relationship between the size/distribution of NCs and the electrical uniformity of RRAM devices. In this paper, we focused on the impact of metal NCs size and areal density on the resistive switching (RS) performances of oxide RRAM by atomic layer deposition (ALD) based on the experimental results and theoretical calculation. The dependence of ALD cycles of 50–130 during Pt or CoPtx NCs growth on the RS parameters of Al2O3 or HfO2 memory units has been evaluated systematically. The RRAM embedded Pt or CoPtx NCs shows the trends: with increasing ALD cycles, the forming voltage, set/reset voltage, the resistance in off and on state, and ${R}_{ \mathrm{\scriptscriptstyle OFF}}/{R}_{ \mathrm{\scriptscriptstyle ON}}$ ratio entirely first decrease, then flatten, and increase later with a minimum value at about 100 cycles. Although all metal NCs with various sizes enhance the electric field strength compared to at the planar region, only metal NCs with proper NCs size and areal density (9 nm/6– $10\times 10^{\textsf {11}}$ /cm2 in this paper) can effectively produce stronger localized electric field at the tip of metal NCs, leading to optimal RS behavior. [ABSTRACT FROM AUTHOR]

When developing silicon carbide (SiC) devices, the reliability of the internal body diode is an important issue. Stacking faults (SFs) are expanded from basal plane defects by using a body diode. Although it is well known that ON-voltage degradation occurs due to SFs, their effects on dynamic reliability have not been studied well. Furthermore, including the effects of SFs, there are not many reports about the dynamic reliability of SiC-MOSFETs. In this paper, a double-pulse switching test using 3.3-kV SiC-MOSFETs was carried out to clarify the failure mechanism of the switching operation of SiC-MOSFETs and effects of SFs on the safe operation area (SOA). Before the switching test, current stress was applied to the body diode of the devices under test (DUTs) to expand the SFs. The circuit configuration was half-bridge type, and a double-pulse gate signal was applied to the lower arm DUT. The switching voltage was 1.8 kV, and the switching current increased at about 8-A steps to failure. As a result, reverse recovery SOA (RRSOA) reliability decreased depending on the amount of SFs in the SiC-MOSFET. Because RRSOA failure was caused by avalanche due to the hole concentration during reverse recovery and the SFs raised local current density, reverse bias SOA (RBSOA) hardly decreased even if SFs containing SiC-MOSFETs were used. This is because RBSOA failure was caused by degradation of the gate isolation layer due to overheating and the temperature coefficient of the SFs electric resistance indicated negative. [ABSTRACT FROM AUTHOR]

This paper presents a comparison of switching performances between the in-situ oxide, gallium nitride (GaN) interlayer FET (OG-FET) and the conventional GaN metal–oxide–semiconductor FET (MOSFET), and explores the influence of the channel electron mobility on the device switching performance. GaN OG-FET is a novel structure with a pristine GaN layer grown between the gate oxide and the p-GaN enhancing the channel mobility up to 185 cm2/ $\text {V}\cdot \text {s}$ , which is over $3{\times}$ larger than that of the typical reported value (50 cm2/ $\text {V}\cdot \text {s}$) in GaN MOSFET. Owing to the high channel electron mobility, the GaN OG-FET showed a switching loss 30% lower than that of the conventional GaN trench MOSFET. Our results indicate that GaN OG-FET has the potential to attain greater efficiency, particularly at higher frequencies, showing a possible patch toward megahertz range conversions. [ABSTRACT FROM AUTHOR]

The switching properties of Te and TeTiW top electrodes (TEs) on TiW/SiN/TiN resistive switching memory devices are explored in this paper. The TeTiW TE device exhibits more favorable bipolar resistive switching behavior because of the decrease in binding energy after its use. This finding is confirmed through X-ray photoelectron spectroscopy analyses. The filament of the TeTiW TE device is metal like after forming, and the reset process corresponds with the thermal-dissolution mechanism. A physical model based on a Te filament is constructed to explain such phenomena. The TeTiW TE device provides the excellent endurance of more than 104 cycles, with an ON/OFF ratio of 500. The improvement can be attributed to the filament’s robustness during the forming and set processes, which prevent its diffusion even at high temperature. The device also features long retention for up to 104 s at 225 °C without stress, and 104 s at 85 °C with stress of −0.3 V. Therefore, it has high potential for high-density nonvolatile memory applications. [ABSTRACT FROM AUTHOR]

In this paper, we demonstrate the linear conductance-change characteristics of a conductive-bridging RAM (CBRAM) to be employed as an artificial synapse device in neuromorphic systems. The CBRAM with a bilayer electrolyte structure (${\mathrm {Cu/Cu}}_{{2}-{x}}\text{S}$ / $\mathrm {WO}_{{3}-{x}}$ /W) exhibits analog switching behavior during the depression process due to the well-controlled dissolution of the conductive filament. To analyze the origin of this motion, we investigate the effective voltage applied to $\mathrm {Cu}_{{2}-{x}}\text{S}$ and $\mathrm {WO}_{{3}-{x}}$. Our findings reveal that $\mathrm {Cu}_{{2}-{x}}\text{S}$ , acting as a voltage divider, helps in suppressing the large voltage drop in $\mathrm {WO}_{{3}-{x}}$ , where the formation/dissolution of filament occurs. Furthermore, due to the diode-like characteristics of $\mathrm {Cu}_{{2}-{x}}\text{S}$ and the division of voltage drop between $\mathrm {WO}_{{3}-{x}}$ and $\mathrm {Cu}_{{2}-{x}}\text{S}$ , an optimum programming energy is applied to $\mathrm {WO}_{{3}-{x}}$ during the depression process. This leads to linear conductance-change characteristics under identical pulses. However, abrupt conductance-change characteristics are observed during the potentiation process. Thus, we use only the device characteristics of the depression part for the neuromorphic system. An excellent classification accuracy is achieved due to the linear conductance-change characteristics and optimized pulse conditions. [ABSTRACT FROM AUTHOR]

A comprehensive study on the dielectric modulated (DM) drift region for power devices is presented in this paper. The performance of this drift region structure is theoretically analyzed and compared with other two structures: conventional and superjunction. In this paper, a study is focused on switching performance. The C – V relationships during switching are analytically derived, and the depletion widths predicted by the proposed analytical model agree well with simulation in a wide reverse bias region. The switching energy loss is evaluated based on the analytical model and its accuracy is verified by 2-D simulations. An effective depletion charge QD is defined as E\mathrm {loss} / breakdown voltage (BV), from which a figure of merit (FOM) of R\mathrm{\scriptscriptstyle ON,\mathrm {sp}}{}^\ast QD is proposed to compare the performances of these different drift region structures, considering both the conduction and switching losses. The discussions in part I on Si and silicon carbide device structures are extended in part II to include FOMs. It is found that the DM drift region structures show better R\mathrm{\scriptscriptstyle ON,\mathrm {sp}} -BV tradeoffs compared with the conventional structures, but slighter inferior FOMs. However, DM structures are still attractive for applications, where switching loss is less critical than the conduction loss, such as low frequency or soft switching. [ABSTRACT FROM PUBLISHER]

Performance of the crossbar memory array highly depends on the selector characteristics. In this paper, rigorous transient analyses are performed for a large-size crossbar memory array using novel NbO2-based selectors with a threshold switching behavior. To enable accurate and efficient array-level simulation, an electrostatic discharge-based compact model is employed to effectively describe the ${I}$ – ${V}$ characteristics of the selector. Multiple key design parameters of the selector are investigated, such as the threshold voltage, leakage current, and intrinsic switching speed. A sensitivity analysis is performed to evaluate the impact of hypothetical improvements in various selector parameters. In addition, the impacts of resistances of interconnect and memory element on the array-level access delay and energy dissipation are quantified. The results show that reducing the threshold voltage of selectors provides the most significant performance improvement, where up to 80% of the energy-delay product saving is observed if the threshold voltage is reduced by 50%. [ABSTRACT FROM AUTHOR]

This paper reports the significance of device architecture to enhance impact ionization (I.I.) resulting in steep increase in the current from OFF- to ON-state. Recognizing that the area over which I.I. occurs is a key factor governing impact generated power per unit volume in the semiconductor film, we use raised source/drain (RSD) architecture to achieve sub-60-mV/decade subthreshold swing (S-swing) in germanium (Ge) junctionless (JL) devices at drain bias ( ${V}_{\text {ds}}$ ) of 0.9 V. The performance of RSD Ge JL device is compared with double-gate Ge JL transistor to highlight the occurrence of subthermal S-swing <5 mV/decade in RSD topology. The impact of band-to-band tunneling (BTBT) on the switching characteristics shows that RSD JL device with relatively thicker side oxide can effectively suppress BTBT while enhancing I.I. The influence of parasitic capacitance due to RSD regions and vertical doping gradient is also analyzed. Results highlight new viewpoints for the design of RSD Ge JL MOSFETs with channel doping $({N}_{\text {ch}}) \ge {5}\times {10}^{18}$ cm−3 to facilitate sharp current transition. [ABSTRACT FROM AUTHOR]

Transport properties of realistic phosphorene nanoribbons (PNRs) with edge defects are studied by using statistical atomistic quantum transport simulations. Regarding the impact of nanoribbon width downscaling and increasing of edge defect percentage, we show that PNRs exhibit qualitatively similar behavior of the ON- and OFF-state conductance, and of the ON–OFF conductance ratio as graphene nanoribbons (GNRs). However, we demonstrate that PNRs are superior to GNRs in terms of the absolute values of the conductance parameters, and that PNRs are much more immune to edge defects than their graphene counterparts. This paper identifies PNRs as a more promising channel material than GNRs for the extremely scaled postsilicon transistor technology. [ABSTRACT FROM PUBLISHER]

Due to high surface-to-volume ratio, surface traps play crucial role in electronic properties of semiconductor nanowires and nanowire-based devices. Recently, it was experimentally demonstrated that surface traps even can induce conductivity type inversion in semiconductor nanowires. Here, we have performed theoretical and numerical analyses to investigate the influence of surface traps on semiconductor nanowire conductivity including possible inversion due to surface traps. The Poisson equation with consideration of both type of mobile charges and ionized donors was solved having surface trapped charges in Neumann boundary conditions. Different semiconductor materials and surface trap densities have been considered. Calculations were done considering single energy level of surface traps and then the results were generalized to exponential energetic distribution of surface states density. The effect of surface traps was analyzed both for low-doped and highly doped nanowires. It was shown that for moderate or lightly doped NWs, the conductivity type switching from n- to p-type can occur at small radii. The developed potential-based analytical model allows calculating the inversion charge raised due to surface traps. The accuracy of analytical calculations has been validated with TCAD simulations and qualitatively compared with published experimental data. This paper is useful for design optimization of nanowire-based photodetectors, sensors, and reconfigurable FETs. [ABSTRACT FROM AUTHOR]

Nonvolatile logic computations are of particular interest due to their zero standby leakage power consumption. In this paper, we explore a nonvolatile majority logic using voltage-driven magnetoelectric (ME) switching of ferromagnets. Specifically, we employ ME magnetic tunnel junctions (ME-MTJs) connected in parallel to construct a majority gate. We also present the cascadability of the proposed majority gate using CMOS inverters. Furthermore, through a mixed-mode simulation framework consisting of magnetization dynamics and electron transport model, we analyze the robustness of the proposed majority gate under process variations. Our analysis shows that due to parallel connection of the ME-MTJs, high tunnel magnetoresistance (TMR) ratios are required for proper functioning of the proposed majority gate, in presence of variations. In order to relax the constraints on the TMR requirements, we present an alternate implementation of the majority logic that does not require a parallel connection of ME-MTJs, thereby increasing the robustness against process variations. Energy and delay metrics are presented for a full adder implementation using the proposed majority gates. [ABSTRACT FROM AUTHOR]

Ferroelectric (FE) hafnium oxide is a promising candidate for memory applications. In this paper, endurance, imprint, and retention tests are carried out on FE aluminum-doped hafnium oxide thin films with different electrodes: 1) metal–insulator–metal (MIM) and 2) silicon–insulator–silicon(SIS). MIM devices exhibit higher endurance than SIS devices. However, SIS devices show superior imprint and retention, with an extrapolated retention time-to-failure larger than 10 years at 85 °C. These results are very promising to integrate FE-HfO2 in 3-D structures, either for dynamic random access memory or for NAND applications. [ABSTRACT FROM PUBLISHER]

In this paper, we present an effective switching current model ( I\textsf {eff} ) for inverter followed by a transmission gate structure (Inv-Tx) based on its switching trajectory. Unlike an inverter or NAND/NOR gates, where I\textsf {eff} depends only on nMOSFET (pMOSFET) current for a falling (rising) transition, it is a function of both nMOSFET and pMOSFET currents for an Inv-Tx cell. The proposed model is verified against HSPICE simulations for a wide range of supply voltages and fan-outs at different technology nodes (e.g., 180, 130, and 65 nm). The model predicts the transition delay values with an average (maximum) error of 7% (11%) compared with HSPICE simulations. Synopsys TCAD Sentaurus simulations at 32-nm technology node are also used to validate the basic model assumptions. To demonstrate the utility of our model, design of some representative circuits while incorporating layout-dependent effects and inverse-narrow-width effect is presented. Finally, we show that a 256X1 multiplexer and a static D-flip-flop, with their transistor sizes and layout, optimized using the proposed model improves the performance of these circuits significantly over the conventional design methodologies. [ABSTRACT FROM PUBLISHER]

Negative capacitance FETs (NCFETs) have attracted significant interest due to their steep-switching capability at a low voltage and the associated benefits for implementing energy-efficient Boolean logic. While most existing works aim to avoid the ID – VG hysteresis in NCFETs, this paper exploits this hysteresis feature for logic-memory synergy and presents a custom-designed nonvolatile NCFET D flip-flop (DFF) that maintains its state during power outages. This paper also presents an NCFET fabricated for this purpose, showing <10 mV/decade steep hysteresisedges and high, up to seven orders inmagnitude, R\text {DS} ratio between the two polarization states. With a device-circuit codesign that takes advantage of the embedded nonvolatility and the high R\text {DS} ratio, the proposed DFF consumes negligible static current in backup and restore operations, and remains robust even with significant global and local ferroelectric material variations across a wide 0.3–0.8 V supply voltage range. Therefore, the proposed DFF achieves energy-efficient and low-latency backup and restore operations. Furthermore, it has an ultralow energy-delay overhead, below 2.1% in normal operations, and operates using the same voltage supply as the Boolean logic elements with which it connects. This promises energy-efficient nonvolatile computing in energy-harvesting and power-gating applications. [ABSTRACT FROM PUBLISHER]

This paper presents a ternary content-addressable memory (TCAM) cell based on a skewed straintronic magnetotunneling junction (MTJ) switch. A straintronic magnetotunneling junction (s-MTJ) is a three-terminal switch, where the resistance between two of the terminals switches when a potential is applied to the third (gate) terminal that induces strain in the magnetostrictive free-layer. An s-MTJ is a highly energy-efficient switch that would dissipate only ~aJ of energy during switching. This paper discusses a novel variant of s-MTJ, namely skewed s-MTJ (ss-MTJ), where the MTJ switching can be controlled by two gate terminals. The current through an ss-MTJ is minimum when the potentials at the first and second gate terminals ( V2 and V3 , respectively) obey the relation V3 = V2+VF . Here, VF is a fixed voltage (“offset voltage”). Current in an ss-MTJ increases steeply when V2 and V3 deviate from the above “match” condition. This unconventional I – V characteristic of an ss-MTJ is exploited to design a non-Boolean TCAM cell based on just one transistor, one trench capacitor, and one ss-MTJ. We also discuss search and write operations in the ss-MTJ-TCAM cell, and show that the cell requires very small voltages to operate because of the unique I – V characteristics of the ss-MTJ. [ABSTRACT FROM PUBLISHER]

3-D integrations are unavoidable task for new emerging memories, including resistive switching random-access memory (RRAM), in order to overcome the market-leading nand flash. However, an RRAM crossbar array (CBA) suffers severe read margin degradation due to the sneak current, which becomes even more critical as the memory density increases with the 3-D integration. In this paper, we extend the two-port readout scheme for a 2-D CBA, proposed in our previous work, to the 3-D vertical structure. A closed-form expression of the operating principle is derived, and HSPICE simulation using a $32\times 32\times8$ vertical RRAM CBA considering practical circuit parameters verifies feasibility of the two-port scheme to the 3-D CBA. [ABSTRACT FROM AUTHOR]

This paper presents a 512-column linear CMOS image sensor (CIS) with 32-stage digital time-delay integration (TDI) operation. A signal processing architecture consists of analog-front-ends, analog-to-digital converters (ADCs), and digital accumulators (DAs) are designed with optimization of timing, area, and power efficiency. An eight-column-shared 10-b successive approximation register ADC with data prediction switching technique and 11-b DA are proposed to achieve a data depth of 15 b after 32-stage TDI. The achieved signal-to-noise ratio boost is 14.84 dB after 32-stage TDI operation. The proposed linear TDI sensor is implemented in 0.11- \mu \textm TSMC backside illumination CIS technology with a line time of 104~\mu \texts , a pixel pitch of 7.5~\mu \textm , and a power consumption of 153.2~\mu \textW /column. [ABSTRACT FROM AUTHOR]

The focus of this paper is to understand the impact of the material properties of GaN, exploited using a vertical device, in power switching by estimating switching loss. The study was performed with a cascoded current aperture vertical electron transistor (CAVET). The normally OFF device was simulated and analyzed using a Silvaco ATLAS 2-D drift diffusion model integrated to SPICE-based circuit simulator. Besides evaluating the performance space and, hence, potential application space for GaN CAVETs, this paper presents significant accomplishment in establishing a device to circuit model, thereby, offering a reliable method of evaluating GaN-based power transistors. The accuracy of the model was established through the excellent agreement of simulated data with the data sheet specs of a commercial cascoded GaN high electron mobility transistor. The model was successfully applied to compare SiC MOSFETs with GaN CAVETs. A cascoded GaN CAVET has $2\times $ faster switching time, $3\times $ lower switching loss compared with standard commercial SiC MOSFET, owing to the higher electron mobility in GaN. Operating at frequencies of megahertz with low power loss, a GaN CAVET will, therefore, lead to smaller converter size and higher system efficiency. [ABSTRACT FROM PUBLISHER]

Stochastic computing (SC) is a promising technology that can be used for low-cost hardware designs. However, SC suffers from its long latency. Although parallel processing can efficiently shorten the latency, duplicated stochastic number generators (SNGs) are necessary, which cause substantial hardware overhead. This paper proposes a scalable SNG based on the spin-Hall-effect (SHE), which is capable of generating multiple independent stochastic streams simultaneously. The design takes advantages of the efficient charge-to-spin conversion from the Spin-Hall material and the intrinsic stochasticity of nanomagnets. Compared to previous spintronic SNGs, the SHE-SNG can reduce the area by $1.6\times -7.8\times $ and the power by $4.9\times -13\times $ while increasing the degree of parallelism from 1 to 16. Compared to CMOS-based SNGs, the proposed SNG obtained $24\times -120\times $ and $53\times $ reduction in terms of area and power, respectively. Finally, three benchmarks were implemented, and the results indicate that SC implementations with the proposed SHE-SNG can achieve $1.2\times -29\times $ reduction of hardware resources compared to implementations with previous CMOS- and spintronic-based designs while scaling the degree of parallelism from 1 to 64. [ABSTRACT FROM AUTHOR]

In this paper, the requirements of device cross section and aspect ratio (AR) are examined to facilitate steep switching in heavily doped 3-D multiple gate junctionless (JL) transistors. It is shown through well-calibrated simulations and physical insights that the sharp OFF-to- ON switching action is predominantly governed by the area of cross section (${A} _{\textsf {cross}}$) instead of the gate length. A 3-D JL architecture preferably oriented toward a planar topology, i.e., with wider fin and low AR, is conducive for steep switching as a greater bulk area is available for impact ionization. On the contrary, narrow vertical architectures with AR > 1 suppress ${A} _{\textsf {cross}}$ in the bulk and are less likely to support the steep current transition. Steep switching specific scaling methodology is showcased to attain a sharp increase in drain current with a sub-60 mV/decade swing in a tri-gate JL transistor along with an associated negative value of total gate capacitance. [ABSTRACT FROM AUTHOR]

Although spin transfer torque (STT)-based magnetic tunneling junction (MTJ) owns advantages of nonvolatility, nonlimited endurance, and fast write/read, its demand for high current density significantly casts a shadow over its future prospects. Recently, a novel three-terminal MTJ cell that combines voltage-controlled magnetic anisotropy (VCMA) effect and negative capacitance (NC) effect is proposed. Drawing support from the NC amplified VCMA effect and the three-step operation scenario, this novel MTJ cell can dramatically lower the energy consumption to fJ as well as keep high operation speed within nanoseconds. The feasibility of the proposed NC enhanced VCMA spintronics device for memory and logic application is proved by extensive physical simulation in our previous work. However, a SPICE compatible compact model of the proposed NC enhanced VCMA spintronics device is still demanded for circuit and system level evaluation. In this paper, we provide an accurate and fast compact model of NC enhanced VCMA device for both memory and logic applications. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the relationship between size, shape, and the performance of the voltage-controlled magnetic anisotropy (VCMA)-based magnetic tunnel junctions (MTJs) suitable for gigabit scale MRAMs with 10 years of retention time. A Fokker–Planck simulation framework is developed to model the magnetization dynamics in the presence of thermal noise. Here, we numerically show that the optimization of the MTJ geometry can significantly improve the performance of the VCMA-based MTJs. Using an elliptical MTJ with aspect ratio (AR) of 3 reduces the required supply voltage and energy consumption by 80.7% and 92%, respectively, compared to a circular MTJ when the minimum feature size is 50 nm. The design requirements on the VCMA coefficient, ${\xi }$ , are also reduced by 67%. However, the influence of AR is observed to diminish with reduction in the minimum feature size of the MTJ. For instance, when the minimum feature size is 20 nm, the required supply voltage and energy consumption reduce only by 60.29% and 65.30%, respectively. We, then, perform a comprehensive scaling analysis on the VCMA-based MTJs by varying size, geometry, and ${\xi }$ of the MTJs. The predicted scaling trends are then compared with those of the STT MTJs. [ABSTRACT FROM AUTHOR]

The reverse-conducting insulated gate bipolar transistor (RC-IGBT) has several benefits over a separate IGBT and diode solution and has the potential to become the dominant device within many power electronic applications; including, but not limited to, motor control, resonant converters, and switch-mode power supplies. However, the device inherently suffers from many undesirable design tradeoffs which have prevented its widespread use. One of the most critical issues is the snapback seen in the forward conduction characteristic which can prevent full turn-on of the device and result in the device becoming unsuitable for parallel operation (required in many high voltage modules). This phenomenon can be suppressed but at the expense of the reverse conduction performance. This paper provides an overview of the technical design challenges presented by the RC-IGBT structure and reviews alternative device concepts which have been proposed in literature. Analysis shows that these alternate concepts either present a tradeoff in performance characteristics, an inability to be manufactured, or a requirement for a custom gate drive. [ABSTRACT FROM AUTHOR]

In the study of resistive random access memory using GeTeOx film as the switching layer, the device performed excellent property of bipolar resistive switching (BRS), which could be gradually transformed to the complementary resistive switching (CRS) by varying SET process current compliance. The conductive filament conduction mechanism of BRS could be verified by electrical characteristics and reliable data fitting. Through increasing current compliance of the SET process, CRS could be achieved due to higher activity of oxygen vacancies originated from the intensified thermal effect. This paper was beneficial to understand the switching mechanisms of BRS and CRS and provide a method to realize interconversion. Moreover, it was also a potential and promising device to be applied in the neurosynaptic biomimetic field. [ABSTRACT FROM AUTHOR]

Mechanisms of time-dependent dielectric breakdown (TDDB) in nonfilamentary a-Si/TiO2 RRAM cell [a-vacancy modulated conductive oxide (VMCO)] have been examined in this paper, including defects generation in the grain boundary, defects clustering, and different defects generation rates in a-Si and TiO2 layers. The unique feature of a bimodal Weibull distribution at low-resistance state (LRS) and a single shallow slope distribution at high-resistance state (HRS) cannot be explained by the above mechanisms. By using a combination of constant voltage stress, time-to-breakdown Weibull distribution, and random telegraph noise (RTN)-based defect profiling in devices of various sizes, layer thicknesses, and processes, it is revealed that the defect profile is modulated when switching between HRS and LRS and the correlation of defect profile modulation with local defect generation rate can explain the difference in Weibull distributions at HRS and LRS. The transition from bimodal distribution at LRS to a single-steep slope with thinner a-Si layer, and the good area scaling of Weibull distribution at HRS but not at LRS, can also be explained. The critical layers affecting the TDDB in a-VMCO are identified, providing useful guidance for device performance improvement. [ABSTRACT FROM AUTHOR]

We present a physics-based compact model that captures the behavior of phase-transition materials. The model includes a self-heating module that captures the change in temperature with device operation and the resulting phase change. This is the first compact model that captures the temperature-dependent multidomain switching and the hysteresis behavior seen in such devices. The model is implemented in Verilog-A and validated with experimental data for various geometries and temperatures. It is further coupled with industry standard BSIM-BULK, ASM-HEMT, and BSIM-CMG models for SPICE simulation and validated for various phase-transition FETs, illustrating the previously proposed steep switching effect and a subthreshold slope below the Boltzmann limit of 60 mV/decade. [ABSTRACT FROM AUTHOR]

We report on measurements and modeling of ferroelectric (FE) HfZrO/SiO2 FE–dielectric FETs, which indicate that many of the phenomena attributed to negative capacitance (NC) can be explained by a delayed response of FE-domain switching—referred to as transient NC (TNC). No traversal of the stabilized NC branch is required. Modeling is used to correlate the hysteretic properties of the FE material to the measured transient and subthreshold slope (SS) behavior. It is found that steep SS can be understood as a transient phenomenon and is present when significant polarization changes occur. The experimental signature of the TNC is investigated, and guidelines for detecting it in measured data are outlined. The technological implications of FE polarization switching are investigated, and it is found that NCFETs relying on it are not suitable for high-performance CMOS logic due to voltage, frequency, and hysteresis limitations. Requirements for experimental evidence of stabilized S-curve behavior are summarized. [ABSTRACT FROM AUTHOR]

In the quest for novel, scalable and energy-efficient computing technologies, spin-based logic devices are being extensively explored due to their potential for nonvolatility, small cell area, and low operational power. Spin torque majority gate (STMG) is one of the most promising options for beyond CMOS nonvolatile logic circuits for normally-off computing. However, significant problems arose with cascade-ability, signal nonreciprocity, and complicated circuit configurations based on STMG. In this paper, a novel magnetic majority gate (MMG) logic has been proposed, utilizing both spin transfer torque and spin–orbit torque effects. A logic family including and/nand and or/nor functions can be achieved with an easy configuration and under a stable operation. Communication between logic units is realized by spin current injection through a nonferromagnetic metal wire to ensure its cascade-ability and nonreciprocity to design multiple logic-depth circuits. With all of these advantages, the proposed cascadable MMGs can be utilized to design logic functions such as the BUFFER/ NOT, XOR/ XNOR, and complicated logic gates, which pave the pathway for designing robust and comprehensive logic circuits using full spintronic devices. [ABSTRACT FROM AUTHOR]

This paper reports on the suppression of single-transistor latch, an extreme condition of impact ionization (I.I.), in n-type double-gate germanium (Ge) junctionless (JL) transistors. It is shown that JL transistors can be latched to the on-state due to an increase in the I.I. generated power per unit volume with an increase in drain bias, film thickness, oxide thickness, and doping. Latch, being detrimental to switching, can be effectively suppressed by applying an appropriate negative (positive) back-gate bias for n-type (p-type) JL MOSFET. The independent gate operation with appropriate back bias allows the device to overcome latching and regain switching action with a subthreshold swing (${S}$ -swing) <10 mV/decade at room temperature. The work showcases the limit imposed on back bias due to an increase in off-state current due to band-to-band tunneling along with the utility of sidewall spacer to effectively suppress the same. We also show the tunability of hysteresis using back-gate bias. The work highlights a systematic methodology to eliminate single-transistor latch while preserving sub-60 mV/decade switching in Ge JL MOSFETs. [ABSTRACT FROM AUTHOR]

Switching behavior in electron–hole bilayer tunnel FETs is known to be unaffected by the subthreshold swing limitation of 60 mV/decade imposed by thermal injection, due to the band-to-band tunneling phenomena on which they rely. However, in this paper, we show that, once parasitic lateral tunneling processes are suppressed by means of heterogate configurations, a new physical limitation arises at the onset of tunneling in this type of transistors, resulting from the interplay between field-induced quantum confinement and asymmetric concentrations of electrons and holes inside the channel. We demonstrate that this limitation comes from the fact that, regardless of the band profile sharpness, the tunneling distance at subband alignment cannot be reduced beyond a certain limit, which we find to be dependent on the body thickness and the material properties. [ABSTRACT FROM PUBLISHER]

Noise in resistive switching memory (RRAM) is among the main concerns due to its impact on the reliability of single-bit and multilevel cell devices. Although noise in typical RRAM cells is understood fairly well, the statistics of noise and the presence and impact of statistical tails in the current fluctuation is what mostly affects the RRAM reliability at the array level. This paper addresses current noise in RRAM arrays, focusing on high-resistance state distribution and its broadening with time. We highlight two main contributions to the tail behavior, namely, random walk (RW) and random telegraph noise (RTN) with random start and stop. We provide evidence for a time decay of RW amplitude with time, which we explain by time-dependent stabilization of defects. We finally develop a statistical Monte Carlo model for noise, which is capable of explaining the broadening of the resistance distribution based on a physical description of RW and RTN components. [ABSTRACT FROM AUTHOR]

In this paper, we investigate in depth Forming, SET, and Retention of conductive-bridge random-access memory (CBRAM). A kinetic Monte Carlo model of the CBRAM has been developed considering ionic hopping and chemical reaction dynamics. Based on inputs from ab initio calculations and the physical properties of the materials, the model offers the simulation of both the Forming/SET and the Data Retention operations. It aims to create a bond between the physics at atomic level and the device behavior. From the model and experimental results obtained on decananometric devices, we propose an understanding of the physical mechanisms involved in the CBRAM operations. Using the consistent Forming/SET and Data Retention model, we obtained good agreement with the experimental data. Finally, the impact of each layer of the CBRAM on the Forming/SET behavior is decorrelated, allowing an optimization of the performance. [ABSTRACT FROM AUTHOR]

Partial bias schemes reduce the disturbance during the writing of crossbar arrays (CBAs). Detailed analysis of two partial bias schemes is presented in this paper: 1) 1/2 bias scheme for low-power operation and 2) 1/3 bias scheme for high-performance (i.e., high Vdd) operation. With partial bias schemes, a sneak leakage reversal phenomenon may occur due to line-resistance-induced voltage degradation, which provides a measure of voltage driving range along access lines. Voltage dividing effect of selector devices reduces disturbance in CBAs and leads to similar writing voltage margin in both bias schemes. Matching a proper partial bias scheme with the selector device choice optimizes the performance of CBAs. [ABSTRACT FROM AUTHOR]

Power consumption of today’s integrated circuit is very difficult to reduce because the MOSFET is subjected to the thermal limit of 60 mV/decade for the subthreshold swing (SS). In this paper, we show that this SS limit of thermionic current can be conquered—thus power consumption drastically reduced by density of states (DOS) engineering at the source. Specifically, the linear DOS of Dirac electrons at the source concomitant with an efficient gate control brings the SS limit down to 37 mV/decade, and further down to very small values by suppressing the thermal tail contribution with a small bandgap in the injected DOS. Using the first principles analysis, we demonstrate that FETs with Dirac source to possess extremely promising device performance in both energy dynamic power and switching speed at the ultralow operating voltage regime of 0.3 V compared with ultrathin-body Si FETs. [ABSTRACT FROM AUTHOR]

Resistive random access memory is known as a type of nonvolatile memory. An abnormal volatile memory characteristic of a normal ZnSnO resistive memory is first demonstrated in this paper. Although the ${I}$ – ${V}$ curves exhibit a normal and stable resistive switching memory behavior, the resistance state is found to be only determined by the initial applied voltage along with the voltage sweep direction. It is set/reset processes free. Namely, it is volatile. The resistance states are found to be dominated by trap-assisted tunneling, trap-controlled space-charge-limited conduction, and hopping transport. Different resistance states are related to different carrier transport mechanisms. Each resistance state can independently and repeatably appear for over 1000 voltage sweeps. The ratio of the high-resistance state to the low-resistance state is $\sim 3\times 10^{2}$. [ABSTRACT FROM AUTHOR]

This paper proposes a new method to determine the overdrive (OD) to improve the response characteristics of displays based on the linearity in voltage domain. The proposed method estimates OD values by using a simple function between the slope of linearity and transition. The values of the function can be determined using only two measurements. The proposed work can be applied to both active-matrix liquid-crystal displays and active-matrix organic light-emitting diode (AMOLED) displays. OD artifacts were observable when OD deviation was over three gray levels. However, the average OD deviations were 1.47, 0.87, and 0.69 when the proposed method was applied to twisted nematic, in-plane switching, and fringe-field switching modes, respectively. The deviation in AMOLED displays was 0.45 gray levels. [ABSTRACT FROM AUTHOR]

Selector-less resistive random-access memory (RRAM) devices require high nonlinearity (NL) in low-resistance state current ( ${I}_{\textsf {LRS}}$ ). In this paper, we investigate the effect of composition (here, Ca%)-dependent material properties, viz., ion migration barrier, and thermal conductivity, on memory performance of recently demonstrated Pr1–xCaxMnO3-based selector-less RRAM with high NL. First, the NL increases as “ $\mathit {x}$ ” decreases. This is attributed to higher self-heating in $\textsf {PCMO}{(}\mathit {x}{)}$ films as composition-dependent thermal conductivity ( $\kappa $ ) decreases as “ $\mathit {x}$ ” is decreased. This enables selector-less operation. Second, larger memory window is observed as “ $\mathit {x}$ ” increases due to decrease in the voltage required for onset of RESET process (i.e., $V_{\textsf {MIN, RESET}}$ ) as “ $\mathit {x}$ ” is increased. Lower $V_{\textsf {MIN, RESET}}$ at higher “ $\mathit {x}$ ” is due to higher oxygen-ion conductivity attributed to lower migration barrier ( ${E}_{m}$ ). Third, retention is measured at different temperatures to extract composition-dependent ${E}_{m}$. The poor memory retention performance for $\mathit {x}= 1$ is consistent with lower ${E}_{m}$ estimated. Finally, enhanced endurance is observed for lower ${E}_{m}$ due to low-energy requirement for switching. Based on these observations, an interrelation between ${E}_{m}$ , retention, and endurance is established. Therefore, an interplay of composition-dependent thermal conductivity and oxygen-ion migration barrier enables tunable memory characteristics in Pr1–xCaxMnO3-based RRAM. [ABSTRACT FROM AUTHOR]

The aim of this paper is to introduce a compact model for perpendicular spin-transfer torque (STT)-magnetic tunnel junctions (MTJs) implemented in Verilog-A to assure easy integration with electrical circuit simulators. It takes into account the effects of voltage-dependent perpendicular magnetic anisotropy, temperature-dependent parameters, thermal heating/cooling, MTJ process variations, and the spin-torque asymmetry of the Slonczewski spin-polarization function in the switching process. This translates into a comprehensive modeling that was adopted to investigate the writing performance under voltage scaling of a $256\times256$ STT- magnetic random access memory array implemented at three different technology nodes. Obtained results show that scaling from 30- to 20-nm node allows a write energy saving of about 43%, while the supply voltage that assures the minimum-energy write operation increases. [ABSTRACT FROM PUBLISHER]

Stateful in-memory logic (IML) is a promising paradigm to realize the unity of data storage and processing in the same die, exhibiting great feasibility to break the bottleneck of the conventional von Neumann architecture. On the roadmap toward developing such a logic platform, a critical step is the effective and efficient realization of a complete set of logic functions within a memory. In this paper, we report a realization of stateful reconfigurable logic functions via a single three-terminal magnetic tunnel junction (MTJ) device within a spintronic memory by exploiting the novel voltage-gated spin Hall-effect driven magnetization switching mechanism. This proposed reconfigurable IML methodology can be implemented within either a typical memory array or a cross-point array architecture. The feasibility of the proposed approach is successfully demonstrated with hybrid MTJ/CMOS circuit simulations. We believe our work may promote the research and development of the revolutionary IML for future non-von Neumann architectures. [ABSTRACT FROM PUBLISHER]

This paper reports on the impact of soft- and hard-switching conditions on the dynamic ON-resistance of AlGaN/GaN high-electron mobility transistors. For this study, we used a special double pulse setup, which controls the overlapping of the drain and gate waveforms (thus inducing soft and hard switching), while measuring the corresponding impact on the ON-resistance, drain current, and electroluminescence (EL). The results demonstrate that the analyzed devices do not suffer from dynamic R {\mathrm{\scriptscriptstyle ON}} increase when they are submitted to soft switching up to V{\text {DS}}= 600 V. On the contrary, hard-switching conditions lead to a measurable increase in the dynamic ON-resistance (dynamic- R \mathrm{\scriptscriptstyle ON}) . The increase in dynamic R \mathrm{\scriptscriptstyle ON} induced by hard switching is ascribed to hot-electrons effects: during each switching event, the electrons in the channel are accelerated by the high electric field and subsequently trapped in the AlGaN/GaN heterostructure or at the surface. This hypothesis is supported by the following results: 1) the increase in R \mathrm{\scriptscriptstyle ON} is correlated with the EL signal measured under hard-switching conditions and 2) the impact of hard switching on dynamic R \mathrm{\scriptscriptstyle ON} becomes weaker at high-temperature levels, as the average energy of hot electrons decreases due to the increase scattering with the lattice. [ABSTRACT FROM PUBLISHER]